Texas Instruments

TAS5725RGZT - 20W Class-D Audio Amplifier | Texas Instruments

MPN: TAS5725RGZT ✓ 啟用中
RGZ surface-mount package Package
MOQ: 1 |

TAS5725RGZT 概覽

The Texas Instruments TAS5725RGZT is a 20 W Class-D audio power amplifier IC supplied in a surface-mount RGZ tape-and-reel package. It is designed for compact audio systems that require efficient digital power amplification while maintaining a small component footprint. The product listing identifies the device as a linear audio amplifier IC from Texas Instruments.

A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to control energy delivered to a loudspeaker. Compared with conventional linear audio output stages, the Class-D architecture can reduce power dissipation and heat generation, making it useful in consumer audio, automotive audio, communications equipment, and powered speaker systems. The exact channel configuration, modulation method, and electrical limits are defined by the manufacturer datasheet.

The TAS5725RGZT is associated with a 20 W audio output class and closed-loop feedback operation. Closed-loop feedback is intended to correct output distortion and voltage variation by measuring the amplifier output and adjusting the drive stage. Digital audio input support can also help reduce analog signal-chain complexity when the surrounding system uses a digital audio source, although connector format, data format, and control-interface details must be confirmed against the pin description and application information.

The RGZ ordering variant is supplied on tape and reel for automated surface-mount assembly. A tape-and-reel format supports high-volume pick-and-place production while protecting the exposed package leads from mechanical handling. Package dimensions, exposed-pad construction, pin orientation, and recommended land pattern require confirmation from the Texas Instruments package drawing before PCB release.

Typical uses include compact powered speakers, soundbars, automotive cabin-audio systems, communication speakers, and portable or networked audio products. In these systems, the amplifier converts a digital audio stream into a high-current drive signal for the loudspeaker. Designers should size the power supply for the amplifier load, maintain adequate copper area for thermal conduction, and filter switched-node energy before it reaches sensitive analog circuitry.

The main design consideration is ensuring that the power stage, speaker load, layout, and thermal design operate together. Speaker impedance and frequency determine required output power and current, while PCB copper and enclosure heat dissipation limit sustainable output. Place input, power, and ground connections according to the manufacturer reference layout, and validate EMC performance before a production release.

This page organizes the available TAS5725RGZT product information, sourcing questions, package guidance, and engineering considerations. For an exact electrical or pin-level decision, use the Texas Instruments datasheet, pin table, typical application circuit, and package drawing as the controlling references.

直接替換替代品,適用於 TAS5725RGZT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: TAS5725RGZT (相同外形與佔位) — 差異在於 Product Type.

Texas Instruments
Product Type: Amplifier IC
比較對象 TAS5725RGZT →

TAS5720ARGZT

✅ 直接替換 ⚠️ 規格未經驗證
📦 VQFN-48 (RGZ)
same 48-pin RGZ land pattern and digital-input closed-loop Class-D architecture; channel count and output power rating differ from the TAS5725, so confirm per-channel output power before substitution

📋 參考替代品(不在目錄中)

TAS5720ARGZT-Q1

✅ 直接替換 ⚠️ 規格未經驗證
📦 VQFN-48 (RGZ)
same 48-pin RGZ footprint as the TAS5725RGZT but AEC-Q100 automotive-qualified temperature grade, giving a wider qualified temperature range for the same electrical class

📋 參考替代品(不在目錄中)

TAS5722RGZT

✅ 直接替換 ⚠️ 規格未經驗證
📦 VQFN-48 (RGZ)
same 48-pin RGZ package and digital-input Class-D topology; output power and channel configuration differ, so the substituted device may deliver a different maximum power per channel

📋 參考替代品(不在目錄中)

TAS5725RGZR

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 VQFN-48 (RGZ)
Amplifier IC · Texas Instruments · TAS5725RGZR · TAS5725 · RGZ

聯絡詢價

查看資料表 →

TAS5715RGZT

✅ 直接替換 ⚠️ 規格未經驗證
📦 VQFN-48 (RGZ)
same 48-pin VQFN RGZ footprint and digital-input Class-D output stage; power rating and internal mixing configuration differ, requiring schematic review of signal routing and filter values

📋 參考替代品(不在目錄中)

TAS5725RGZT 最大額定值與電氣特性

Manufacturer Texas Instruments
Product Type Audio amplifier IC
Product Classification Linear audio amplifier IC
Amplifier Class Class-D audio amplifier
Rated Output Power 20 W
Feedback Architecture Closed-loop
Audio Input Digital audio input
封裝 RGZ surface-mount package
安裝類型 Surface mount
Packaging Tape and reel

TAS5725RGZT rgz surface-mount package 腳位配置指南

TAS5725RGZT(rgz surface-mount package 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

TAS5725RGZT 的 rgz surface-mount package 封裝腳位圖

無詳細腳位定義資料: TAS5725RGZT.

請參閱 資料表 以查看完整腳位配置。

典型應用

TAS5725RGZT 適用於 6 應用s: Compact Powered Speakers, Automotive Cabin Audio, Soundbar Speaker Drive, Communications Speaker Systems, Portable Audio Products, Smart Speaker Enclosures.

🔊

Compact Powered Speakers

The TAS5725RGZT fits compact powered-speaker designs requiring a 20 W-class Class-D output stage with digital audio input. Its closed-loop feedback can help the amplifier maintain a controlled output while the loudspeaker load changes. A typical implementation accepts a digital stream from a codec or processor, routes that signal into the amplifier, and uses the manufacturer reference layout for power, ground, and output connections. Before layout release, verify the exact digital format, supply limits, speaker impedance, and thermal performance. The main design tradeoff is integration against thermal headroom: a 20 W-class stage can require substantial copper area and careful enclosure airflow in a small enclosure.

🚗

Automotive Cabin Audio

The TAS5725RGZT is a candidate for automotive cabin-audio power stages because it combines a 20 W Class-D output class with a digital input and closed-loop feedback. Digital input can shorten the analog path between the source processor and speaker drive, while closed-loop operation can reduce output variation associated with supply or load conditions. Qualification is the decisive requirement: confirm AEC-Q100 status, operating-temperature limits, load dump behavior, and automotive-grade traceability for the exact MPN. The PCB should follow the manufacturer power and thermal layout, with attention to ground return, speaker wiring, EMI filtering, and heat spreading around the RGZ package.

📺

Soundbar Speaker Drive

A soundbar can use the TAS5725RGZT as a 20 W-class digital-input Class-D drive section for compact internal speakers. Receiving a digital audio stream reduces the need to pass full-scale analog signals over long PCB traces, while closed-loop feedback helps control the output delivered to the loudspeaker. The amplifier remains part of a larger signal chain requiring a processor, codec, power converter, and mechanical enclosure. Validate channel mapping, digital sample-rate support, mute behavior, and gain structure against the manufacturer interface documentation. Thermal design should account for sustained music rather than a single 20 W test condition, and speaker filters must be coordinated with the amplifier output characteristics.

🌐

Communications Speaker Systems

The TAS5725RGZT can support communications equipment that converts a digital voice or audio stream into a 20 W-class speaker output. Closed-loop feedback is useful in products where speaker impedance and wiring length vary, and digital input helps maintain signal integrity between the communications processor and the power stage. The application still needs an appropriate voice codec or processor, system clocking, gain calibration, and output filtering. Validate the supported digital-audio format and ensure the power supply can support the amplifier's peak current, especially when the 20 W-class output is reached at low speaker impedance. Use short, appropriately terminated speaker traces and validate conducted and radiated emissions in the finished enclosure.

📱

Portable Audio Products

The TAS5725RGZT can serve as the speaker-drive stage in a portable or networked audio product that accepts digital audio and needs a 20 W-class Class-D output. Class-D operation can help limit amplifier heat compared with a linear output stage, allowing the power converter and speaker system to be optimized together. Battery-powered products must account for peak current, conversion efficiency, and audible behavior during shutdown or source changes. The RGZ package supports compact surface-mount construction, but exposed-pad soldering and copper coverage must follow the manufacturer land pattern. Confirm the supported clocking arrangement, digital volume-control method, and thermal derating before integrating the amplifier with a low-voltage battery converter.

🧩

Smart Speaker Enclosures

The TAS5725RGZT is suitable for a smart speaker or connected audio enclosure that receives digital program material and drives a speaker through a 20 W-class amplifier stage. Placing the digital interface close to the audio processor can reduce analog noise exposure, while closed-loop feedback can improve consistency across loudspeaker loads. Smart-enclosure designs also involve microphones, echo cancellation, voice processing, wireless connectivity, and multiple power domains, so the amplifier should be isolated appropriately from sensitive inputs. Validate the digital clock and data routing, control initialization sequence, EMI performance, and amplifier shutdown behavior. At the board level, provide a low-impedance supply path and enough copper around the RGZ package to dissipate worst-case Class-D losses.

What is the TAS5725RGZT?
The TAS5725RGZT is a Texas Instruments 20 W Class-D audio amplifier IC offered in an RGZ surface-mount tape-and-reel package. According to the Texas Instruments manufacturer documentation, it is a closed-loop digital-input audio amplifier intended for powered speaker and compact audio systems. Its 20 W output class makes it relevant to products that need efficient audio drive without employing a discrete output-transistor stage.
What output power does the TAS5725RGZT provide?
The TAS5725RGZT is associated with a 20 W Class-D audio output rating. According to the Texas Instruments manufacturer documentation, usable power depends on supply voltage, speaker impedance, thermal conditions, and output configuration. Confirm the exact continuous-power and thermal derating conditions in the manufacturer datasheet before treating 20 W as an unconditional rating for every operating condition.
Where can I download the TAS5725RGZT datasheet PDF?
Use the Texas Instruments cross-reference and product-documentation resources linked on this page to locate the official TAS5725RGZT datasheet PDF. The manufacturer datasheet is the controlling source for the RGZ pin list, electrical limits, 20 W power conditions, digital-audio interface, and recommended application circuit. Do not use an unrelated datasheet whose document title names a different member of the TAS audio-amplifier family.
Where can I find the TAS5725RGZT pinout?
The TAS5725RGZT pinout must be taken from the Texas Instruments pin-description table for the RGZ package. The available product listing confirms surface-mount RGZ tape-and-reel packaging but does not expose individual pin numbers or functions. Use the manufacturer package drawing and pin table when assigning power, ground, digital-audio, control, and exposed-pad connections on the PCB.
What can replace the TAS5725RGZT?
No confirmed drop-in replacement for the TAS5725RGZT is established by the current component references. A valid replacement must use the same RGZ footprint, provide pin-to-pin signal and power compatibility, and maintain comparable 20 W-class audio performance. Do not substitute an amplifier merely because it uses a similar surface-mount package; verify pin functions, control interface, supply limits, and output topology in the manufacturer documentation.
What is the best Texas Instruments equivalent for the TAS5725RGZT?
No Texas Instruments drop-in equivalent for the TAS5725RGZT can be confirmed from the available component references. The only supported answer is to request a manufacturer-assisted cross-reference for the exact RGZ ordering variant. A suitable candidate must preserve the package, pinout, digital-audio behavior, power architecture, and approximately 20 W output class; otherwise it represents a redesign rather than a drop-in replacement.
Where can I buy TAS5725RGZT online?
The TAS5725RGZT can be requested through the Request a Quote form on this page. The form is the appropriate route for current stock status, order quantities, lead time, and shipment arrangements. The part is identified as a Texas Instruments 20 W Class-D audio amplifier in RGZ surface-mount tape-and-reel packaging, so quote requests should include the complete MPN and required reel quantity.
What is the price of TAS5725RGZT?
Use the Request a Quote form on this page to obtain the current TAS5725RGZT quotation. The quoted amount can depend on reel quantity, order volume, component traceability, and current channel availability. The part is specified as a 20 W Class-D audio amplifier in RGZ tape-and-reel packaging, allowing the distributor to confirm the exact ordering suffix and assembly quantity.
What is the lead time for TAS5725RGZT?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on channel inventory, manufacturing continuity, reel availability, and the number of units required. The verified product information identifies the exact 20 W Class-D amplifier MPN but does not state a fixed lead time, so the quotation response should be used for production planning.
Is TAS5725RGZT in stock?
Current TAS5725RGZT inventory should be confirmed through the Request a Quote form on this page. The component is offered as a Texas Instruments 20 W Class-D audio amplifier in an RGZ tape-and-reel package. Provide your required quantity and reel preference so the channel can confirm allocation, stock, and delivery timing for the exact ordering variant.
When should I choose TAS5725RGZT instead of another audio amplifier?
Choose the TAS5725RGZT when the design requires a Texas Instruments 20 W-class digital-input Class-D audio stage and the RGZ package matches the PCB design. The choice is less suitable when an automotive qualification, a different package, a different digital-audio format, or a verified cross-brand drop-in alternative is mandatory. Final selection depends on interface, thermal, protection, and speaker-load requirements.
Is TAS5725RGZT suitable for automotive audio?
The TAS5725RGZT may suit automotive audio only after its environmental, qualification, and operating-temperature requirements are verified. It is a 20 W Class-D audio amplifier with digital input and closed-loop feedback, but the available information does not establish AEC-Q100 qualification for this exact ordering variant. Automotive programs should require the manufacturer qualification report before approving the device.
What are the key specifications of TAS5725RGZT that engineers should know?
The key established specifications are a 20 W Class-D output class, digital audio input, closed-loop feedback, and an RGZ surface-mount tape-and-reel package from Texas Instruments. According to the Texas Instruments manufacturer documentation, these features suit efficient powered-speaker designs. Supply limits, output-current capability, THD+N, signal-to-noise ratio, protection behavior, and thermal limits require verification in the exact-device datasheet.
TAS5725RGZT versus a generic 20 W Class-D amplifier: which is better?
The TAS5725RGZT is preferable when a documented Texas Instruments 20 W-class amplifier, digital input, closed-loop feedback, and the specified RGZ footprint meet the design requirements. A generic amplifier may offer a lower-cost alternative, but it cannot be considered drop-in without proving pin compatibility, supply range, digital format, control registers, and thermal behavior. Interface and qualification needs determine the final choice.
Does the TAS5725RGZT need a heatsink?
Thermal requirements depend on supply voltage, speaker impedance, continuous output level, PCB copper, and enclosure cooling; the 20 W rating alone does not determine whether a heatsink is required. The RGZ package and exposed-pad construction must be followed according to the manufacturer land pattern. Use the datasheet thermal equations with the actual worst-case dissipation and ambient conditions before finalizing the mechanical design.

工程參考資料,適用於 TAS5725RGZT — 比較、設計指引及合規資訊。

選型指南

Choose TAS5725RGZT when the product needs a compact 20 W-class Class-D audio stage with digital input, closed-loop feedback, and the specified Texas Instruments RGZ footprint. It is particularly relevant to powered speakers, soundbars, communications devices, smart speakers, and selected automotive audio platforms. Do not select it based on output wattage alone: the complete digital interface, supply range, channel configuration, speaker impedance, protection features, thermal limits, and qualification must match the design. No confirmed pin-compatible alternative is currently established for this exact ordering variant, so changing manufacturers should be treated as a redesign. For a lower-cost design, evaluate an analog-input amplifier only after confirming that the source architecture, signal quality, PCB area, thermal performance, and software-control requirements can change safely.

與替代品比較

參數 本產品
Package RGZ surface-mount tape-and-reel package
Brand Texas Instruments
Product Type Class-D audio amplifier IC
Rated Output Power 20 W
Feedback Architecture Closed-loop
Audio Input Digital audio input

主要差異化特點

  • Integrated digital-input Class-D audio function (對比Generic analog-input 20 W power stage)
  • Closed-loop output control (對比Open-loop Class-D amplifier)
  • Production-oriented tape-and-reel handling (對比Loose or cut-tape component)

設計說明

Use the Texas Instruments RGZ land pattern and reference layout exactly, including the exposed-pad connection and thermal-via arrangement. Place the input, digital interface, ground return, and speaker-output paths according to the manufacturer recommendations. Keep high-current supply and speaker traces away from sensitive audio traces, and provide a continuous ground reference beneath the device where the package drawing permits it.

Evaluate Class-D conduction and switching losses at the highest sustained speaker power rather than using only the 20 W audio-output rating. Estimated thermal calculations should use the actual supply voltage, output RMS voltage, efficiency, ambient temperature, and RGZ thermal resistance from the manufacturer documentation. Increase exposed-pad copper area and improve enclosure heat transfer if the calculated junction temperature exceeds the device limit.

A 20 W Class-D output can create high-current edges and substantial switched-node energy. Use short power and output paths, minimize loop area, and provide local input and bulk capacitance at the supply pins. Keep the amplifier return current away from microphone, antenna, and clock inputs. Confirm EMI performance with the enclosure, speaker cable, filters, and power converter operating together, because laboratory compliance of the IC alone does not establish final-product compliance.

Do not infer pin compatibility from the RGZ suffix, package outline, or a distributor similarity label. Verify the complete pin table, digital-audio format, clock requirements, control interface, supply limits, and shutdown behavior for the exact TAS5725RGZT ordering variant. Also check that the selected speaker impedance and continuous-power conditions are permitted; a package match alone does not establish a valid replacement.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the exact Texas Instruments product documentation and declarations.

資料驗證日期: 2026-11-10 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

TAS5725RGZT datasheet TAS5725RGZT pinout TAS5725RGZT datasheet pdf TAS5725RGZT specifications TAS5725RGZT equivalent TAS5725RGZT replacement TAS5725RGZT cross reference TAS5725RGZT drop-in replacement Texas Instruments TAS5725RGZT TAS5725RGZT price TAS5725RGZT stock TAS5725RGZT 20W Class-D amplifier TAS5725RGZT RGZ package TAS5725RGZT application circuit

相關元件與詞彙

Texas Instruments TAS5725RGZT TAS5725 Class-D amplifier audio amplifier IC linear amplifier digital audio input closed-loop feedback 20 W output RGZ package QFN family surface-mount technology SMD packaging tape-and-reel packaging powered speaker automotive audio soundbar smart speaker communications audio power management IC semiconductor EMI thermal resistance
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情