Texas Instruments

THS3115CD - Dual 110MHz Current Feedback Amplifier | TI

N.º da peça: THS3115CD ✓ Ativo
5 V to 15 V Vdss 2.9 pA/√Hz Id 14-SOIC Package
MOQ: 1 |

THS3115CD Visão geral

The Texas Instruments THS3115CD is a dual, low-noise, high-output-current operational amplifier based on a current-feedback architecture. It combines a listed gain-bandwidth product of 110 MHz with a 14-pin SOIC package, making it suitable for high-speed analog signal chains that require low distortion and strong output-current capability. The THS3115CD is identified as a two-circuit current-feedback amplifier and includes a shutdown function.

A current-feedback operational amplifier is a voltage-amplifier building block that uses feedback to control gain inside an inverting amplifier configuration. Unlike the classic voltage-feedback topology, current-feedback amplifiers retain relatively high closed-loop bandwidth as gain increases, provided the feedback resistor and source impedances are selected correctly. Current-feedback amplifiers belong to the broader operational-amplifier, analog-amplifier, and signal-conditioning IC hierarchy.

The principal performance features include 110 MHz listed bandwidth, low-noise operation, and high output-current drive. A distributor description identifies the device as a low-noise, high-speed current-feedback amplifier, while the manufacturer describes it as a dual amplifier with shutdown. The listed current-noise figures are 2.9 pA/√Hz for the noninverting input and 10.8 pA/√Hz for the inverting input, parameters that are especially relevant when working with high-impedance sources and photodiode front ends.

THS3115CD is packaged in a 14-pin SOIC with a stated body width of 0.154 inches, or 3.90 mm. The dual amplifier provides two signal-processing channels in one package, reducing board area in systems such as active filters, video-signal conditioning, instrumentation front ends, and high-speed control loops. The SOIC-14 footprint also simplifies assembly where leaded-package compatibility is required.

Typical uses include active filters, data-acquisition front ends, video amplification, transimpedance stages, and general high-speed analog buffering. Because current-feedback amplifiers depend on feedback-network design, the application circuit should follow the manufacturer’s recommended feedback resistor and matching guidance rather than treating the circuit like a unity-gain voltage-feedback amplifier.

For layout, keep input, feedback, and output traces short, use a low-inductance ground return, and place decoupling capacitors close to the supply pins. Stable current-feedback operation depends on minimizing parasitic capacitance at the inverting input and maintaining the recommended feedback resistor network.

This page brings together manufacturer and distributor product information, package identification, application guidance, verified alternatives, and practical design notes. It helps engineers evaluate bandwidth, noise, drive capability, layout sensitivity, and replacement options without relying solely on a catalog listing.

Alternativas drop-in para THS3115CD — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com THS3115CD (mesmo formato e footprint) — diferindo em Package, Shutdown Function.

Texas Instruments
Package: 14-pin SOIC (D), 3.90 mm width
Shutdown Function: Yes, low-power shutdown
Comparar com THS3115CD →

THS3115ID

✅ Drop-In
Texas Instruments
📦 14-SOIC
Current-feedback operational amplifier · 2 channels · 110 MHz · 2.9 pA/√Hz · 10.8 pA/√Hz · 300 µA per channel · Yes, low-power shutdown · 14-pin SOIC (D), 3.90 mm width

Consulte o preço

Ver ficha técnica →

THS3115CD Classificações máximas e características elétricas

Amplifier Type Current-feedback operational amplifier
Number of Amplifiers 2 amplifiers
Number of Circuits 2 circuits
Listed Bandwidth 110 MHz
Distributor Bandwidth Listing 95 MHz
Noninverting Current Noise 2.9 pA/√Hz
Inverting Current Noise 10.8 pA/√Hz
Supply Voltage Range 5 V to 15 V
Shutdown Function Yes
Encapsulamento 14-SOIC
Package Body Width 0.154 inch (3.90 mm)
Contagem de pinos 14 pins
Tipo de montagem Surface mount

Guia de Configuração de Pinos do THS3115CD 0.154 inch (3.90 mm)

Configuração de pinos para THS3115CD (pacote 0.154 inch (3.90 mm)). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 0.154 inch (3.90 mm) para THS3115CD

Nenhum dado detalhado de pinagem disponível para THS3115CD.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

THS3115CD é adequado para 6 aplicaçãos: High-Speed Active Filtering, Video Signal Conditioning, Transimpedance Front Ends, Precision Data-Acquisition Front Ends, Industrial Control Signal Amplification, Audio and Low-Noise Preamplification.

🔧

High-Speed Active Filtering

The THS3115CD suits active-filter stages that must preserve signal fidelity while driving the next circuit in a high-speed chain. Its dual current-feedback architecture provides two channels in one 14-SOIC package, and the listed 110 MHz bandwidth gives ample headroom for filters whose useful corner frequency is far below the amplifier’s small-signal bandwidth. The 2.9 pA/√Hz noninverting current noise helps preserve source-noise performance with high-impedance inputs. Because current-feedback amplifiers are sensitive to feedback-component values and parasitic input capacitance, begin with the recommended resistor network in the manufacturer application guidance and verify the complete filter response against the actual source and load impedances.

🔧

Video Signal Conditioning

The THS3115CD can condition low-amplitude video or control signals where bandwidth and output-drive capability matter more than DC precision. The family’s listed 110 MHz bandwidth and high-output-current design make it appropriate for driving terminated lines, buffering converter outputs, and driving downstream ADC inputs. Its shutdown function can reduce power consumption in systems where the signal path is enabled only intermittently. Layout remains essential: route the feedback loop and inverting input over a stable ground reference, keep video traces short, and place supply-bypass capacitors at the device pins to limit supply noise from appearing inside the amplified signal.

🔧

Transimpedance Front Ends

The THS3115CD is suitable for photodiode, phototransistor, and other current-source front ends where the listed current-noise values are more useful than voltage-noise specifications. The family combines 2.9 pA/√Hz noninverting current noise with a 110 MHz listed bandwidth, providing enough speed for moderate-bandwidth sensing systems. Its high-output-current capability is valuable when the amplifier must also drive a following stage. Keep the photodiode node physically small, avoid long high-impedance traces, place the feedback resistor close to the inverting input, and follow the manufacturer’s transimpedance guidance because excessive junction capacitance can create instability even when bandwidth appears adequate.

🔧

Precision Data-Acquisition Front Ends

The THS3115CD can serve as the high-speed analog entry stage ahead of a data converter when the source impedance and signal bandwidth suit a current-feedback amplifier. The 110 MHz listed bandwidth supports wideband acquisition, while the low-noise specification helps preserve the signal-to-noise ratio of weak analog sources. Dual-channel packaging allows simultaneous or multiplexed acquisition paths in a compact 14-SOIC footprint. Validate gain accuracy against the chosen feedback resistor, check settling time for the required sample rate, and provide a low-impedance return for the source so that parasitic capacitance does not undermine the current-feedback loop.

🔧

Industrial Control Signal Amplification

Industrial controllers often need to amplify sensor outputs quickly enough to support fast feedback loops or drive isolation and conversion stages. The THS3115CD’s listed 110 MHz bandwidth and high output-current capability provide a useful combination for conditioning control signals without adding substantial propagation delay. Its shutdown function can help manage power in systems with intermittent operating states. For robust industrial implementations, use the exact supply limits from the manufacturer documentation, maintain a low-impedance ground reference, and separate sensitive input routing from switching-node and high-current output paths on the PCB.

🔧

Audio and Low-Noise Preamplification

The THS3115CD can amplify weak audio or low-level instrumentation signals when the required bandwidth is much higher than a conventional precision op-amp offers. The THS3115 family is described as low noise, and the listed 2.9 pA/√Hz noninverting and 10.8 pA/√Hz inverting current-noise values are directly relevant to source-noise calculations. High output-current capability supports downstream loading. Select feedback resistors from the manufacturer’s recommended values, avoid placing high-impedance input wiring beside digital traces, and test the complete chain for audible or measurement-visible oscillation because current-feedback amplifiers can become unstable with unsuitable feedback networks.

What is the THS3115CD?
The THS3115CD is a dual, 110 MHz current-feedback operational amplifier from Texas Instruments packaged in a 14-pin SOIC. According to the manufacturer product page, the THS3115 family is a dual, low-noise, high-output-current amplifier with shutdown, while distributor listings identify the THS3115CD as a two-circuit device. It is intended for high-speed analog signal conditioning rather than precision low-speed instrumentation.
What are the key specifications of THS3115CD?
The THS3115CD combines two amplifier circuits, a listed bandwidth of 110 MHz, low-noise operation, high output-current capability, and shutdown in a 14-SOIC package. According to the Texas Instruments product page and Mouser listing, it is a dual low-noise, high-speed current-feedback amplifier. The comparison data also lists 2.9 pA/√Hz noninverting current noise and 10.8 pA/√Hz inverting current noise.
Where can I download the THS3115CD datasheet PDF?
The THS3115CD datasheet PDF is available through the Texas Instruments THS3115 product page and the linked manufacturer-hosted document mirror. Use the THS3115 product page for current ordering information and the Package Option Addendum referenced by the datasheet for the latest package details. The searchable PDF mirror is https://pdf.digi-electronics.com/pdf/2579/THS3115CD-datasheet.pdf.
Where can I find the THS3115CD pinout?
Use the pin-configuration section and the Package Option Addendum in the THS3115 manufacturer datasheet to assign PCB tracks. The verified product information identifies a 14-pin SOIC package but does not reproduce the individual terminal names or numbering. Confirm every connection against the official pin diagram before fabrication, especially the shutdown terminal and both amplifier sections.
Why is the THS3115CD a current-feedback amplifier?
The THS3115CD uses current feedback to set closed-loop gain, allowing relatively high bandwidth to be maintained as gain changes when the feedback network is implemented correctly. According to the Texas Instruments product description, the THS3115 family is designed for low noise, high speed, and high output current. Designers should follow the recommended feedback-resistor values rather than copying a generic voltage-feedback amplifier circuit.
What is the bandwidth of THS3115CD?
The manufacturer and Mouser descriptions list the THS3115 family and THS3115CD at 110 MHz bandwidth. One distributor database separately displays 95 MHz, so engineers should use 110 MHz as the headline listing value and confirm the exact gain, bandwidth, and gain-bandwidth conditions in the official THS3115 datasheet before sizing a closed-loop response.
What is the difference between THS3115CD and THS3115ID?
The THS3115CD and THS3115ID are related 14-pin SOIC orderable members of the same THS3115 family, and comparison listings explicitly pair them as alternatives. Their listed architecture and headline 110 MHz bandwidth are unchanged. The ordering suffix indicates different orderable variants, so confirm temperature grade, qualification, and shipment configuration in the manufacturer ordering table before treating them as interchangeable.
Is the THS3115CD suitable for audio preamplifier applications?
The THS3115CD can be used in suitable audio and low-noise analog preamplifier circuits because the family is specified for low noise, high speed, and high output current. Its 2.9 pA/√Hz noninverting and 10.8 pA/√Hz inverting current-noise values are the relevant figures for source-noise analysis. The shutdown function can also support power conservation in portable or intermittently operating equipment.
What is the best drop-in replacement for THS3115CD?
The THS3115ID is the closest identified same-family alternative in a comparable 14-pin SOIC configuration, while preserving the dual current-feedback architecture and 110 MHz headline bandwidth. A drop-in decision still requires checking pin functions, temperature grade, supply limits, and feedback-network requirements in the manufacturer documentation. No cross-brand part is listed because a verified pin-compatible substitution was not identified.
Can THS3115ID replace THS3115CD on an existing PCB?
The THS3115ID is a plausible same-family replacement for THS3115CD because both are associated with the 14-pin SOIC THS3115 family and the listed dual current-feedback architecture and 110 MHz bandwidth are retained. Treat the result as conditional until pin functions, shutdown polarity, temperature grade, and absolute maximum ratings are checked against the official ordering information and datasheet.
When should I choose THS3115CD over a voltage-feedback amplifier?
Choose the THS3115CD when the signal path needs a current-feedback topology, high listed bandwidth, and strong output-current drive in a compact dual SOIC package. A voltage-feedback amplifier may be preferable when very high closed-loop gain, precision DC accuracy, or simple unity-gain stability dominates the design. The correct choice also depends on the required noise, output swing, and load.
How should I design the feedback network for THS3115CD?
Design the feedback network with the resistor value recommended for the intended closed-loop gain and use the manufacturer’s recommended matching guidance. Current-feedback amplifiers are sensitive to the feedback resistor, source impedance, and parasitic capacitance around the inverting input. Begin with the official THS3115 application information, then verify stability and gain accuracy with the actual source and load impedances.
What layout practices matter for THS3115CD performance?
Keep the inverting-input, feedback-resistor, and output paths physically short and connect the bypass capacitors directly to the supply pins. Use a continuous ground plane and avoid routing high-current outputs beneath the sensitive input nodes. According to the manufacturer datasheet, the Package Option Addendum should also be consulted for the latest land pattern and package information.
Where can I buy THS3115CD?
Use the Request a Quote form on this page to request current availability, lot traceability, and a quotation for the exact THS3115CD ordering code. Current listings identify the component as a 14-SOIC current-feedback amplifier from Texas Instruments. Because stock and lead time can change, request the current commercial terms rather than relying on a historical catalog or cached availability record.
What is the lead time and price of THS3115CD?
Request the current price, minimum order quantity, and lead time through the Request a Quote form on this page. Texas Instruments identifies the THS3115 as a dual, low-noise, 110 MHz amplifier with shutdown, and the CD ordering code is available in a 14-SOIC package. Commercial terms vary by quantity, date, traceability requirements, and market conditions, so a live quotation is the authoritative source.
Is THS3115CD RoHS compliant?
The THS3115CD’s RoHS compliance status is not stated in the manufacturer and distributor excerpts available for this page, so it should be confirmed in the Texas Instruments product documentation or a current compliance declaration. Do not infer lead-free, halogen-free, REACH, or conflict-minerals status solely from the package type. Request the applicable material-compliance documentation when it is required for procurement or qualification.

Dados de referência de engenharia para THS3115CD — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose THS3115CD for dual high-speed analog channels that need a current-feedback architecture, a listed 110 MHz bandwidth, low-noise operation, and strong output-current capability in a 14-SOIC package. It is a strong fit for active filters, video conditioning, transimpedance amplifiers, and data-acquisition inputs when the feedback network is designed according to the manufacturer guidance. Choose THS3115ID when its particular orderable grade or qualification better matches the product program, but confirm pin functions, temperature rating, and supply limits before substituting it on an existing board. For precision low-speed DC amplification, a low-noise voltage-feedback amplifier may be easier to stabilize. A cross-brand replacement is not recommended without a separate engineering review of pin compatibility, feedback-response behavior, output swing, and shutdown implementation.

Comparação com alternativas

Parâmetro Este produto THS3115ID
Brand Texas Instruments Texas Instruments
Package 14-SOIC 14-SOIC
Amplifier Type Current-feedback operational amplifier Current-feedback operational amplifier
Number of Amplifiers 2 2
Number of Circuits 2 2
Listed Bandwidth 110 MHz 110 MHz
Shutdown Function Yes Yes
Noninverting Current Noise 2.9 pA/√Hz 2.9 pA/√Hz
Inverting Current Noise 10.8 pA/√Hz 10.8 pA/√Hz

Principais diferenciais

  • Same-family dual current-feedback replacement retains the headline bandwidth (vs THS3115ID)
  • Dual high-speed channels in a compact SOIC (vs THS3115ID)
  • Low-noise current-feedback operation with shutdown (vs THS3115ID)

Notas de projeto

Keep the inverting input, feedback resistor, and output routing short and compact because parasitic capacitance at the inverting node can reduce stability in a current-feedback amplifier. Place the feedback resistor close to its package pin, use a continuous ground plane, and route noisy switching-current paths away from the input region. Verify the assembled layout with the actual sensor, source, and load impedances rather than relying only on schematic simulation.

Follow the manufacturer’s specified supply range of 5 V to 15 V and connect bypass capacitors directly to the supply pins. Keep each decoupling path short and provide adequate return connectivity so output-current transients do not modulate the input reference. The THS3115 includes shutdown, but its shutdown behavior, polarity, and timing must be checked in the official documentation before using it for power gating.

Do not substitute a generic voltage-feedback amplifier configuration without re-evaluating gain bandwidth, stability, and feedback resistance. Current-feedback amplifiers depend on the recommended feedback network and are particularly sensitive to excessive source capacitance and capacitance at the inverting input. Begin with the manufacturer’s application guidance, simulate the real source and load models, and validate gain accuracy, settling, and oscillation margin before release.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer and distributor excerpts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Obtain the current Texas Instruments compliance documentation for the exact orderable code.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

THS3115CD datasheet THS3115CD specifications THS3115CD pinout THS3115CD datasheet pdf THS3115CD equivalent THS3115CD replacement THS3115CD vs THS3115ID THS3115CD SOIC-14 footprint Texas Instruments THS3115CD THS3115CD current feedback amplifier THS3115CD 110 MHz amplifier THS3115CD active filter THS3115CD price THS3115CD stock THS3115CD application circuit

Componentes & termos relacionados

Texas Instruments THS3115CD THS3115ID THS3115 current-feedback amplifier operational amplifier analog amplifier signal-conditioning IC high-speed amplifier low-noise amplifier 110 MHz 2.9 pA/√Hz 10.8 pA/√Hz high output current shutdown function 14-SOIC SOIC package family surface mount active filter transimpedance amplifier video signal conditioning data acquisition RoHS REACH AEC-Q100
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ