THS3115CD - Dual 110MHz Current Feedback Amplifier | TI
MPN: THS3115CD ✓ فعالTHS3115CD جائزہ
A current-feedback operational amplifier is a voltage-amplifier building block that uses feedback to control gain inside an inverting amplifier configuration. Unlike the classic voltage-feedback topology, current-feedback amplifiers retain relatively high closed-loop bandwidth as gain increases, provided the feedback resistor and source impedances are selected correctly. Current-feedback amplifiers belong to the broader operational-amplifier, analog-amplifier, and signal-conditioning IC hierarchy.
The principal performance features include 110 MHz listed bandwidth, low-noise operation, and high output-current drive. A distributor description identifies the device as a low-noise, high-speed current-feedback amplifier, while the manufacturer describes it as a dual amplifier with shutdown. The listed current-noise figures are 2.9 pA/√Hz for the noninverting input and 10.8 pA/√Hz for the inverting input, parameters that are especially relevant when working with high-impedance sources and photodiode front ends.
THS3115CD is packaged in a 14-pin SOIC with a stated body width of 0.154 inches, or 3.90 mm. The dual amplifier provides two signal-processing channels in one package, reducing board area in systems such as active filters, video-signal conditioning, instrumentation front ends, and high-speed control loops. The SOIC-14 footprint also simplifies assembly where leaded-package compatibility is required.
Typical uses include active filters, data-acquisition front ends, video amplification, transimpedance stages, and general high-speed analog buffering. Because current-feedback amplifiers depend on feedback-network design, the application circuit should follow the manufacturer’s recommended feedback resistor and matching guidance rather than treating the circuit like a unity-gain voltage-feedback amplifier.
For layout, keep input, feedback, and output traces short, use a low-inductance ground return, and place decoupling capacitors close to the supply pins. Stable current-feedback operation depends on minimizing parasitic capacitance at the inverting input and maintaining the recommended feedback resistor network.
This page brings together manufacturer and distributor product information, package identification, application guidance, verified alternatives, and practical design notes. It helps engineers evaluate bandwidth, noise, drive capability, layout sensitivity, and replacement options without relying solely on a catalog listing.
کے لیے ڈراپ اِن متبادل THS3115CD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں THS3115CD (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Shutdown Function.
THS3115ID
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →THS3115CD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Amplifier Type | Current-feedback operational amplifier |
| Number of Amplifiers | 2 amplifiers |
| Number of Circuits | 2 circuits |
| Listed Bandwidth | 110 MHz |
| Distributor Bandwidth Listing | 95 MHz |
| Noninverting Current Noise | 2.9 pA/√Hz |
| Inverting Current Noise | 10.8 pA/√Hz |
| Supply Voltage Range | 5 V to 15 V |
| Shutdown Function | Yes |
| پیکیج | 14-SOIC |
| Package Body Width | 0.154 inch (3.90 mm) |
| پن کی تعداد | 14 pins |
| ماؤنٹنگ ٹائپ | Surface mount |
THS3115CD 0.154 inch (3.90 mm) پن کنفیگریشن گائیڈ
THS3115CD (0.154 inch (3.90 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں THS3115CD.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
THS3115CD کے لیے موزوں ہے 6 ایپلیکیشنs: High-Speed Active Filtering, Video Signal Conditioning, Transimpedance Front Ends, Precision Data-Acquisition Front Ends, Industrial Control Signal Amplification, Audio and Low-Noise Preamplification.
High-Speed Active Filtering
The THS3115CD suits active-filter stages that must preserve signal fidelity while driving the next circuit in a high-speed chain. Its dual current-feedback architecture provides two channels in one 14-SOIC package, and the listed 110 MHz bandwidth gives ample headroom for filters whose useful corner frequency is far below the amplifier’s small-signal bandwidth. The 2.9 pA/√Hz noninverting current noise helps preserve source-noise performance with high-impedance inputs. Because current-feedback amplifiers are sensitive to feedback-component values and parasitic input capacitance, begin with the recommended resistor network in the manufacturer application guidance and verify the complete filter response against the actual source and load impedances.
Video Signal Conditioning
The THS3115CD can condition low-amplitude video or control signals where bandwidth and output-drive capability matter more than DC precision. The family’s listed 110 MHz bandwidth and high-output-current design make it appropriate for driving terminated lines, buffering converter outputs, and driving downstream ADC inputs. Its shutdown function can reduce power consumption in systems where the signal path is enabled only intermittently. Layout remains essential: route the feedback loop and inverting input over a stable ground reference, keep video traces short, and place supply-bypass capacitors at the device pins to limit supply noise from appearing inside the amplified signal.
Transimpedance Front Ends
The THS3115CD is suitable for photodiode, phototransistor, and other current-source front ends where the listed current-noise values are more useful than voltage-noise specifications. The family combines 2.9 pA/√Hz noninverting current noise with a 110 MHz listed bandwidth, providing enough speed for moderate-bandwidth sensing systems. Its high-output-current capability is valuable when the amplifier must also drive a following stage. Keep the photodiode node physically small, avoid long high-impedance traces, place the feedback resistor close to the inverting input, and follow the manufacturer’s transimpedance guidance because excessive junction capacitance can create instability even when bandwidth appears adequate.
Precision Data-Acquisition Front Ends
The THS3115CD can serve as the high-speed analog entry stage ahead of a data converter when the source impedance and signal bandwidth suit a current-feedback amplifier. The 110 MHz listed bandwidth supports wideband acquisition, while the low-noise specification helps preserve the signal-to-noise ratio of weak analog sources. Dual-channel packaging allows simultaneous or multiplexed acquisition paths in a compact 14-SOIC footprint. Validate gain accuracy against the chosen feedback resistor, check settling time for the required sample rate, and provide a low-impedance return for the source so that parasitic capacitance does not undermine the current-feedback loop.
Industrial Control Signal Amplification
Industrial controllers often need to amplify sensor outputs quickly enough to support fast feedback loops or drive isolation and conversion stages. The THS3115CD’s listed 110 MHz bandwidth and high output-current capability provide a useful combination for conditioning control signals without adding substantial propagation delay. Its shutdown function can help manage power in systems with intermittent operating states. For robust industrial implementations, use the exact supply limits from the manufacturer documentation, maintain a low-impedance ground reference, and separate sensitive input routing from switching-node and high-current output paths on the PCB.
Audio and Low-Noise Preamplification
The THS3115CD can amplify weak audio or low-level instrumentation signals when the required bandwidth is much higher than a conventional precision op-amp offers. The THS3115 family is described as low noise, and the listed 2.9 pA/√Hz noninverting and 10.8 pA/√Hz inverting current-noise values are directly relevant to source-noise calculations. High output-current capability supports downstream loading. Select feedback resistors from the manufacturer’s recommended values, avoid placing high-impedance input wiring beside digital traces, and test the complete chain for audible or measurement-visible oscillation because current-feedback amplifiers can become unstable with unsuitable feedback networks.
کے لیے انجینئرنگ ریفرنس ڈیٹا THS3115CD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | THS3115ID |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 14-SOIC | 14-SOIC |
| Amplifier Type | Current-feedback operational amplifier | Current-feedback operational amplifier |
| Number of Amplifiers | 2 | 2 |
| Number of Circuits | 2 | 2 |
| Listed Bandwidth | 110 MHz | 110 MHz |
| Shutdown Function | Yes | Yes |
| Noninverting Current Noise | 2.9 pA/√Hz | 2.9 pA/√Hz |
| Inverting Current Noise | 10.8 pA/√Hz | 10.8 pA/√Hz |
اہم امتیازی خصوصیات
- Same-family dual current-feedback replacement retains the headline bandwidth (بمقابلہTHS3115ID)
- Dual high-speed channels in a compact SOIC (بمقابلہTHS3115ID)
- Low-noise current-feedback operation with shutdown (بمقابلہTHS3115ID)
ڈیزائن نوٹس
Keep the inverting input, feedback resistor, and output routing short and compact because parasitic capacitance at the inverting node can reduce stability in a current-feedback amplifier. Place the feedback resistor close to its package pin, use a continuous ground plane, and route noisy switching-current paths away from the input region. Verify the assembled layout with the actual sensor, source, and load impedances rather than relying only on schematic simulation.
Follow the manufacturer’s specified supply range of 5 V to 15 V and connect bypass capacitors directly to the supply pins. Keep each decoupling path short and provide adequate return connectivity so output-current transients do not modulate the input reference. The THS3115 includes shutdown, but its shutdown behavior, polarity, and timing must be checked in the official documentation before using it for power gating.
Do not substitute a generic voltage-feedback amplifier configuration without re-evaluating gain bandwidth, stability, and feedback resistance. Current-feedback amplifiers depend on the recommended feedback network and are particularly sensitive to excessive source capacitance and capacitance at the inverting input. Begin with the manufacturer’s application guidance, simulate the real source and load models, and validate gain accuracy, settling, and oscillation margin before release.
تعمیل کی معلومات
The manufacturer and distributor excerpts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Obtain the current Texas Instruments compliance documentation for the exact orderable code.