Texas Instruments

THS5651IPW - 10-Bit 100-MSPS DAC | Texas Instruments

N.º da peça: THS5651IPW ✓ Ativo
2 mA to 20 mA Id 28-pin TSSOP Package
MOQ: 1 |

THS5651IPW Visão geral

The Texas Instruments THS5651IPW is a 10-bit, 100-MSPS CommsDAC digital-to-analog converter with differential scalable current outputs from 2 mA to 20 mA in a 28-pin TSSOP package. It combines a 10-bit conversion resolution with a 100 MSPS update rate, 1 ns setup and hold timing, and 61 dBc SFDR to Nyquist at 20 MHz.

A CommsDAC is a high-speed data converter designed for communications and signal-generation systems where parallel digital data must be converted into an analog waveform with predictable bandwidth and distortion. The THS5651 belongs to the broader digital-to-analog converter hierarchy, specifically the high-speed CMOS CommsDAC family used in wired and wireless transmission equipment, test and measurement instruments, and digital waveform generation.

The device features differential current outputs that can be scaled from 2 mA to 20 mA, allowing the output level to be matched to downstream amplifiers, baluns, filters, and impedance networks. Its 10-bit resolution provides 1,024 digital codes per conversion. A 100 MSPS update rate permits wide digital input bandwidth, while the reported 61 dBc SFDR to Nyquist at 20 MHz supports moderate-frequency waveform generation and communications test coverage.

THS5651IPW uses a parallel CMOS interface designed for high-speed data capture. The differential outputs reduce common-mode signal at the converter outputs, but external reconstruction or low-pass filtering is still required to remove images and unwanted high-frequency energy. Current-output DACs also require a suitable output network and, in many signal-chain designs, an output buffer capable of driving the required load and providing the desired voltage range.

Typical applications include communications signal generation, baseband waveform synthesis, digital predistortion test equipment, and arbitrary waveform generation. The 20 MHz SFDR figure is particularly relevant when the output is filtered around that frequency, while the 100 MSPS update rate supports Nyquist-zone waveforms extending to 50 MHz at the converter interface. The IC can also serve as the transmitter-side converter in a compact laboratory signal source.

For layout, place the digital interface traces for short, controlled-impedance routing and keep the analog output network close to the DAC pins. Follow the manufacturer datasheet for decoupling, exposed connection details, and pin assignments. Check output-current scaling, load impedance, termination values, and filter attenuation together because incorrect assumptions can alter both amplitude accuracy and spurious performance.

This page combines the manufacturer device information with purchasing guidance, a practical replacement assessment, and engineering notes focused on output-current scaling, filtering, timing, and PCB implementation. These application-oriented details help engineers evaluate the THS5651IPW beyond its basic 10-bit and 100-MSPS headline specifications.

Alternativas drop-in para THS5651IPW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

THS5651AIPW

✅ Drop-In
📦 28-pin TSSOP
Maximum update rate increases from 100 MSPS to 125 MSPS, a 25% increase relative to THS5651IPW; resolution remains 10 bit and the CommsDAC family is identified as pin compatible

📋 Alternativa de referência (fora do catálogo)

THS5651IPW Classificações máximas e características elétricas

Converter Type Digital-to-analog converter (DAC)
Resolução 10 bit
Maximum Update Rate 100 MSPS
Architecture CommsDAC high-speed CMOS DAC
Tipo de saída Differential current output
Output Current Range 2 mA to 20 mA
Number of Output Channels 1 channel
Spurious-Free Dynamic Range 61 dBc to Nyquist at 20 MHz
Setup Time 1 ns
Hold Time 1 ns
Digital Interface Parallel CMOS interface
Número de pinos 28 pins
Encapsulamento 28-pin TSSOP
Tipo de montagem Surface mount

Guia de Configuração de Pinos do THS5651IPW 28-pin tssop

Configuração de pinos para THS5651IPW (pacote 28-pin tssop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 28-pin tssop para THS5651IPW

Nenhum dado detalhado de pinagem disponível para THS5651IPW.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

THS5651IPW é adequado para 6 aplicaçãos: Communications Signal Generation, Baseband Transmitter, Digital Predistortion Testing, Arbitrary Waveform Generator, Industrial Test and Measurement, Wireless Transmitter Signal Chain.

🌐

Communications Signal Generation

The THS5651IPW fits communications signal generation because its 100 MSPS update rate and 10-bit resolution can represent wideband digital test waveforms. The manufacturer reports 61 dBc SFDR to Nyquist at 20 MHz, giving designers a defined starting point for filtering around a 20 MHz signal band. Differential scalable outputs from 2 mA to 20 mA support connection to balanced networks, baluns, and downstream amplifiers. In service, the DAC generates the digital-to-analog waveform, while a reconstruction filter removes images and establishes the final bandwidth. Designers should verify clock timing, output scale, and filter performance against their communication standard.

📡

Baseband Transmitter

The THS5651IPW is appropriate for a compact baseband transmitter that converts parallel digital symbols or waveform samples into a differential analog signal. Its 100 MSPS sampling rate supports a theoretical Nyquist frequency of 50 MHz before filtering, while the 10-bit conversion resolution provides 1,024 addressable output levels. Differential current outputs help reduce common-mode content when paired with a balanced transformer or balun. The external reconstruction filter is critical because it determines which spectral images remain in the transmitted band. Validate output amplitude, load impedance, and filter timing before fixing the transmitter configuration.

📶

Digital Predistortion Testing

The THS5651IPW can serve as the signal source in digital predistortion test equipment where shaped spectra and controlled waveform sequences are required. Its parallel CMOS interface supports direct connection to digital pattern-generation logic, and the 100 MSPS update rate provides a practical operating range for multi-MHz test signals. The scalable differential current outputs allow the output network to be matched to the device under test or its capture chain. Because predistortion measurements depend on repeatable amplitude and phase behavior, the design should include careful clocking, reference grounding, and calibrated reconstruction filtering.

〰️

Arbitrary Waveform Generator

The THS5651IPW is well suited to the output stage of an arbitrary waveform generator because it converts stored digital samples at up to 100 MSPS while offering a 10-bit amplitude resolution. Differential current outputs can drive a balanced output stage or resistive summing network, and the 61 dBc SFDR specification to Nyquist at 20 MHz provides a useful reference when designing a 20 MHz reconstruction path. A laboratory waveform source should supplement the DAC with a low-pass or band-limiting filter, output attenuation, and a buffer with adequate drive. Validate gain accuracy and distortion across the intended output frequencies.

🏭

Industrial Test and Measurement

The THS5651IPW supports industrial test systems that need synchronized analog excitation generated from digital test data. Its 100 MSPS update rate is useful for repetitive waveform patterns, while differential outputs can simplify balanced excitation and reduce susceptibility to common-mode interference. The 28-pin TSSOP package is compatible with compact, surface-mount instrument boards. For production-test reliability, the design should provide stable references, terminate unused digital inputs correctly, and isolate high-speed digital routing from sensitive analog nodes. Confirm operating-temperature requirements against the manufacturer documentation for the specific qualification and production ordering options.

📱

Wireless Transmitter Signal Chain

The THS5651IPW can be used in a wireless transmitter chain to convert digitally prepared I/Q-related or single-channel baseband data into a differential analog waveform. The 10-bit resolution gives 1,024 digital levels, while the 100 MSPS update rate enables substantial instantaneous bandwidth. Differential current outputs between 2 mA and 20 mA can be routed into a balanced RF network through suitable matching and filtering stages. Designers must avoid assuming that the converter alone meets the spectral requirements of the radio path; the reconstruction filter, balun, amplifier linearity, and clock jitter strongly influence final performance.

Resumo dos produtos recomendados

THS5651IPW Texas Instruments Usado em: Communications Signal Generation, Baseband Transmitter, Digital Predistortion Testing, Arbitrary Waveform Generator, Industrial Test and Measurement, Wireless Transmitter Signal Chain THS5651AIPW Pin-compatible 125 MSPS CommsDAC alternative Usado em: Communications Signal Generation, Baseband Transmitter, Digital Predistortion Testing, Arbitrary Waveform Generator, Industrial Test and Measurement, Wireless Transmitter Signal Chain
What is the THS5651IPW?
The THS5651IPW is a 10-bit, 100-MSPS CommsDAC digital-to-analog converter from Texas Instruments. According to the manufacturer datasheet, it uses differential current outputs scalable from 2 mA to 20 mA, supports 1 ns setup and hold timing, and is packaged in a 28-pin TSSOP. It is intended for communications signal generation and other high-speed waveform applications.
What are the key specifications of THS5651IPW that engineers should know?
The THS5651IPW combines 10-bit resolution, a 100 MSPS maximum update rate, differential scalable current outputs, and a parallel CMOS interface. The manufacturer datasheet also reports 61 dBc SFDR to Nyquist at 20 MHz and 1 ns setup and hold timing. Its 28-pin TSSOP package supports compact surface-mount implementation in communications and test equipment.
What is the output current range of THS5651IPW?
The THS5651IPW provides differential output currents that can be scaled from 2 mA to 20 mA. According to the manufacturer datasheet, this scalable-current architecture gives designers flexibility when matching the DAC to baluns, reconstruction filters, amplifiers, and other downstream networks. The selected current scale must be considered together with termination and impedance requirements.
Where can I download the THS5651IPW datasheet PDF?
The THS5651IPW datasheet is available through the manufacturer documentation links and the listed THS5651 document page. It is titled the THS5651 10-bit, 100-MSPS CommsDAC digital-to-analog converter datasheet. Use the manufacturer document for final pin assignments, recommended application circuits, supply constraints, and layout instructions.
Where can I find the THS5651IPW pinout?
Use the pin-description and package-outline sections of the THS5651 manufacturer datasheet to locate the THS5651IPW pinout. The verified package information identifies a 28-pin TSSOP configuration, but a complete numbered pin list was not present in the cited excerpts. Assign PCB nets only after checking the official pin table and exposed-terminal details.
Where can I buy THS5651IPW online?
The THS5651IPW can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial availability, lot-specific quantities, and delivery scheduling. Avoid validating a design around unconfirmed stock; request the exact THS5651IPW ordering suffix and confirm the intended packaging before releasing a production order.
What is the price of THS5651IPW?
Current THS5651IPW pricing is not stated in a static price table because commercial terms can change with quantity and inventory. Submit a Request a Quote on this page with the required quantity and package preference. The quote request can also confirm availability, lead time, and whether split shipments or scheduled deliveries are required.
What is the lead time for THS5651IPW?
Lead time for THS5651IPW depends on current inventory, order quantity, and the production schedule. Use the Request a Quote form on this page to obtain a current delivery estimate for the exact device and package. For safety stock, provide the required quantity and target build date so the schedule can reflect actual demand.
Is THS5651IPW in stock?
Current THS5651IPW stock status should be confirmed through the Request a Quote form on this page rather than inferred from a general product listing. Include your required quantity, acceptable delivery date, and packaging preference. This allows the current supply position to be checked against the project schedule before components are released to manufacturing.
THS5651IPW vs THS5651AIPW - which is better for high-speed signal generation?
Choose the THS5651IPW when 100 MSPS is sufficient and the system is designed around the original THS5651 interface. Choose the THS5651AIPW when the higher 125 MSPS update rate is valuable and the associated design requirements are acceptable. Both use the same manufacturer CommsDAC family concept, but the update-rate difference must be included in timing, filtering, and system-bus calculations.
What is the difference between THS5651IPW and THS5651AIPW?
The principal stated difference is update rate: the THS5651IPW operates at up to 100 MSPS, while the THS5651AIPW operates at up to 125 MSPS. Both are 10-bit CommsDAC devices intended for communications transmission, and the manufacturer identifies the CommsDAC family as pin compatible. Verify the complete pin table, supply conditions, and timing requirements in the relevant official datasheets before substitution.
What can replace THS5651IPW?
The THS5651AIPW is the closest documented same-package replacement candidate because it is a 10-bit CommsDAC in the same pin-compatible product family. Its maximum update rate is 125 MSPS rather than 100 MSPS, a 25% increase relative to the THS5651IPW. Confirm timing, power, output-network, and layout requirements before treating it as a drop-in replacement.
Is THS5651AIPW the same as THS5651IPW?
No, the THS5651AIPW and THS5651IPW are related but not electrically identical devices. Both provide 10-bit CommsDAC conversion and belong to a pin-compatible family, but the maximum update rates are 125 MSPS and 100 MSPS respectively. The difference can affect clock, output bandwidth, filtering, and system timing, so verify the design against the official documentation.
When should I choose THS5651IPW over THS5651AIPW?
Choose the THS5651IPW when the original 100 MSPS CommsDAC design meets the required waveform bandwidth and system timing without the additional update rate of the THS5651AIPW. This can simplify validation when the surrounding clock, memory interface, reconstruction filter, and output network were designed for the original device. Select the 125 MSPS variant only after reviewing all associated timing and signal-integrity changes.
Is THS5651IPW suitable for communications waveform generation?
The THS5651IPW is suitable for communications waveform generation because it is a 100 MSPS, 10-bit CommsDAC with differential scalable current outputs and 61 dBc SFDR to Nyquist at 20 MHz. It can serve as the transmitter-side converter in a communications test source or baseband generator. A reconstruction filter and suitable output network remain necessary for usable analog waveforms.
What is the best drop-in replacement for THS5651IPW?
The THS5651AIPW is the best documented drop-in replacement candidate in the Texas Instruments CommsDAC family because it retains 10-bit resolution and the same TSSOP package family. The trade-off is its 125 MSPS maximum update rate versus 100 MSPS for the THS5651IPW. A true drop-in decision still requires checking every pin, supply condition, timing value, and output-network component.
What is the best Texas Instruments equivalent for THS5651IPW?
The THS5651AIPW is the best same-manufacturer equivalent identified for the THS5651IPW because both are 10-bit CommsDAC devices offered in the pin-compatible 28-pin package family. The main measurable change is the update rate, rising from 100 MSPS to 125 MSPS. Use the manufacturer part details and datasheets to confirm that the faster variant satisfies the original clocking, output, and system timing requirements.

Dados de referência de engenharia para THS5651IPW — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the THS5651IPW when the design requires a 10-bit, 100 MSPS CommsDAC with differential scalable outputs and the surrounding clock, memory interface, filters, and output circuitry have already been validated around that update rate. Its documented 61 dBc SFDR to Nyquist at 20 MHz provides a useful baseline for signals centered in that region. Consider the THS5651AIPW when the extra 125 MSPS update capability is useful and the complete design can be checked for changed timing, bandwidth, power, and output-network behavior. Although both devices belong to the pin-compatible CommsDAC family, verify every pin, supply condition, timing specification, and external component before substitution. For an unchanged production design based on the original THS5651, retaining the THS5651IPW generally reduces validation risk.

Comparação com alternativas

Parâmetro Este produto THS5651AIPW
Package 28-pin TSSOP 28-pin TSSOP - same package family
Brand Texas Instruments Texas Instruments
Resolution 10 bit 10 bit
Maximum Update Rate 100 MSPS 125 MSPS - 25% higher
Converter Type CommsDAC digital-to-analog converter CommsDAC digital-to-analog converter
Output Configuration Differential scalable current output Differential scalable current output
Digital Interface Parallel CMOS interface Parallel CMOS interface

Principais diferenciais

  • Lower maximum update rate for designs centered on the original 100 MSPS CommsDAC interface (vs THS5651AIPW)
  • Documented 20 MHz SFDR figure (vs THS5651AIPW)
  • Scalable differential output level (vs THS5651AIPW)
  • Compact 28-pin TSSOP implementation (vs THS5651AIPW)

Notas de projeto

Keep the parallel data interface short and route it on a controlled-impedance layer when the target clock rate demands it. Place the device's decoupling capacitors at the associated supply pins and avoid placing high-speed digital return currents beneath the analog output network. The DAC output is differential, so maintain symmetrical routing where practical and minimize mismatch between the two signal paths.

Use a reconstruction or low-pass filter after the differential outputs to remove images created by the 100 MSPS sampling process. The reported 61 dBc SFDR applies to a defined 20 MHz signal condition, so filter attenuation, matching, and amplifier performance must be evaluated at the intended operating bandwidth. Include output-current scaling, load resistance, and any downstream buffer gain when calculating the end-to-end amplitude.

Do not treat the THS5651AIPW as an automatic substitute merely because both devices use 10-bit CommsDAC technology. Its maximum update rate is 125 MSPS rather than 100 MSPS, and the 25% increase can change clock timing, available Nyquist bandwidth, output-network behavior, and system validation. Check the complete pin table, power requirements, timing values, and output circuitry against the official documents for both devices.

Confirm supply voltage, ground reference, and decoupling requirements from the manufacturer datasheet before finalizing the schematic. A high-speed DAC can couple supply noise and clock jitter into its output, so separate sensitive analog routing from switching supplies and keep the reference and output-network return path compact. Validate power-up and power-down behavior in the complete board rather than relying only on isolated converter performance.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit compliance declarations for the exact THS5651IPW ordering suffix were identified. Check the manufacturer product page and current material compliance documents before using the device in regulated production designs.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

THS5651IPW datasheet THS5651IPW datasheet pdf THS5651IPW pinout THS5651IPW specifications THS5651IPW equivalent THS5651IPW replacement THS5651IPW vs THS5651AIPW THS5651IPW application circuit THS5651IPW 100 MSPS DAC THS5651IPW 28-pin TSSOP Texas Instruments THS5651IPW THS5651IPW price THS5651IPW stock what can replace THS5651IPW

Componentes & termos relacionados

Texas Instruments THS5651IPW THS5651 THS5651AIPW THS5651A CommsDAC digital-to-analog converter DAC data converter high-speed CMOS DAC wired communications wireless communications 100 MSPS 10-bit resolution differential current output scalable current output SFDR parallel CMOS interface 28-pin TSSOP TSSOP package family surface-mount package reconstruction filter balun baseband signal generation digital predistortion testing
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ