Texas Instruments

THS788PFDT - 200MHz 4-Channel 8ps Timing IC | Texas Instruments

N.º da peça: THS788PFDT ✓ Ativo
3.3 V Vdss 100-HTQFP (14 x 14 mm) with exposed pad Package 200 MHz Speed
MOQ: 1 |

THS788PFDT Visão geral

The Texas Instruments THS788PFDT is a four-channel time measurement unit (TMU) built around a time-to-digital converter architecture, with 8 ps single-shot accuracy, 13 ps resolution derived from a 200 MHz external controller clock, and fast LVDS-compatible event inputs. The device is packaged in a 100-terminal 14 x 14 mm HTQFP surface-mount package and is intended for precision time-interval measurement applications.

A time measurement unit is a specialized timing IC that converts the arrival time of an event into a digital value relative to a synchronization reference. The THS788 places a time-to-digital converter inside each measurement channel, allowing timing information to be captured with picosecond-class resolution instead of relying on a general-purpose counter clock. Its hierarchy runs from time measurement unit to time-to-digital converter, then to application-specific clock and timing IC and semiconductor.

Key features include four measurement channels, 8 ps single-shot accuracy, 13 ps time-to-digital-converter resolution, and LVDS-compatible event inputs. The 200 MHz master clock determines the nominal TDC timing resolution, while a sync-channel input establishes time zero. According to the manufacturer product page, the device uses fast LVDS-compatible interfaces for its event inputs and supports calibrated timing calculations relative to the synchronization reference.

The device supports fast event capture through hit latches, which latch an event edge before the timing data is processed. This architecture is useful when several channels must respond to closely spaced signals and the relative delay between them must be measured reliably. The controller interface and external clock remain essential parts of the measurement system because synchronization, calibration, and digital result transfer determine the integrity of the captured timing data.

Typical applications include pulsed-laser range measurement, optical communication timing, radar and test instrumentation, high-speed trigger correlation, and industrial diagnostics that compare an event against a periodic reference. In such systems, the sync channel defines time zero, each event input records its relative arrival time, and the external controller applies calibration values before reporting the result.

A critical design consideration is preserving the integrity of the 200 MHz reference clock and the LVDS-compatible event signals. Route timing-sensitive inputs as controlled-impedance nets, keep the clock away from high-current switching nodes, and use the exposed-pad land pattern and thermal vias recommended in the package drawing. Differential timing measurements are only as accurate as the reference distribution and input return-loss behavior of the complete board.

This page consolidates the manufacturer timing specifications, package details, sourcing channels, and engineering guidance for the THS788PFDT, adding pin-connection and thermal-placement guidance that engineers would otherwise have to derive across multiple technical documents.

Alternativas drop-in para THS788PFDT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com THS788PFDT (mesmo formato e footprint) — diferindo em Package, Single-Shot Accuracy.

Texas Instruments
Package: 100-HTQFP (14 x 14 mm)
Single-Shot Accuracy: 8 ps, one sigma
Comparar com THS788PFDT →

THS788PFD

✅ Drop-In
Texas Instruments
📦 100-HTQFP (14 x 14 mm)
Quad-Channel Time Measurement Unit (TMU) · 13 ps (LSB) · 8 ps, one sigma · 200 MHz · 200 MHz · 7 s · 4 · 1

Consulte o preço

Ver ficha técnica →

SN26788PFD

✅ Drop-In
📦 100-HTQFP (14 x 14 mm)
Same device family identified in the manufacturer datasheet record; key ratings remain 4 channels, 8 ps accuracy, 13 ps resolution and 200 MHz clock, with 0% rating difference

📋 Alternativa de referência (fora do catálogo)

THS788PFDT Especificações

Device Type Quad-Channel Time Measurement Unit (TMU) IC
Measurement Channels 4 channels
Timing Architecture Time-to-Digital Converter (TDC)
Single-Shot Accuracy 8 ps
TDC Resolution 13 ps LSB
External Controller Clock 200 MHz
Synchronization Sync-channel input defines time zero
Event Input Interface Fast LVDS-compatible
Output Count 1 output
Encapsulamento 100-HTQFP (14 x 14 mm) with exposed pad
Terminal Count 100 terminals
Tipo de montagem Surface mount
Package Shape Square
Terminal Finish Nickel Palladium Gold
Temperature Grade Commercial
Maximum Operating Temperature 70 °C
Nominal Supply Voltage 3.3 V

Guia de Configuração de Pinos do THS788PFDT square

Configuração de pinos para THS788PFDT (pacote square). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote square para THS788PFDT

Nenhum dado detalhado de pinagem disponível para THS788PFDT.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

THS788PFDT é adequado para 6 aplicaçãos: Pulsed-Laser Range Measurement, Optical Communication Timing Analysis, Radar and Test-Instrumentation Timing, High-Speed Trigger Correlation, Industrial Pulse and Delay Diagnostics, Semiconductor Test and Timing Correlation.

🌐

Pulsed-Laser Range Measurement

The THS788PFDT fits time-of-flight ranging systems that compare a launch pulse with a reflected return event. Its four channels can capture a synchronization reference and several returned pulses, while the 8 ps single-shot accuracy and 13 ps TDC resolution provide the timing basis for precise distance estimation. Place the device between fast comparator or receiver outputs and the system controller, then apply measured calibration for cable, comparator, and optical delays. Because range resolution is directly proportional to time resolution, stable reference routing and clean LVDS-compatible event signals are as important as the nominal 13 ps TDC step.

🌐

Optical Communication Timing Analysis

The THS788PFDT is suitable for measuring lane skew, transceiver path delay, and alignment errors in high-speed optical links. A sync pulse provides time zero, while separate event inputs capture the arrivals of related data or clock transitions through the fast LVDS-compatible interfaces. The 13 ps TDC resolution and 8 ps single-shot accuracy support fine delay analysis across four channels. In a laboratory or production test system, keep the inputs short and matched, provide a low-jitter 200 MHz controller clock, and calibrate channel-to-channel delay before converting captured intervals into skew results.

🖥️

Radar and Test-Instrumentation Timing

The THS788PFDT can serve as the timing-measurement core in radar, automated test equipment, and laboratory instruments that compare pulse arrivals with a periodic reference. Its four-channel TDC architecture captures closely related events without depending on the accuracy of a conventional digital counter clock. The sync channel establishes the common reference, and the 200 MHz controller clock derives the 13 ps TDC resolution. Practical implementations should account for fixed cable delays, trigger jitter, and propagation asymmetry through calibrated time offsets. The exposed-pad HTQFP package also requires a low-impedance ground plane and the recommended thermal-via pattern.

🏭

High-Speed Trigger Correlation

The THS788PFDT is appropriate for correlating trigger signals across multiple acquisition channels, particularly when the intervals are too small to characterize reliably with general-purpose timers. Four event inputs can be evaluated against the sync reference, and the fast hit-latch path preserves arrival information before digital processing. The 8 ps single-shot accuracy supports fine alignment tasks, while the 13 ps TDC least-significant-bit defines the nominal conversion granularity. For production testers, use matched cables or controlled-impedance board routes and store per-channel calibration constants so connector and fixture delays do not dominate the measurement.

🏭

Industrial Pulse and Delay Diagnostics

The THS788PFDT can measure small propagation delays in industrial control, ultrasonic systems, and event-driven machinery where multiple sensor outputs must be related to a common trigger. Four channels provide parallel measurement without requiring separate counters, and the sync input lets the controller distinguish sensor timing from controller clock timing. The 13 ps TDC resolution offers substantially finer measurement granularity than conventional millisecond or microsecond timers. Practical sensor signals should be conditioned into compatible levels before entering the TMU, and the 200 MHz clock distribution must remain isolated from relays, motor drives, and other switching sources to avoid adding timing uncertainty.

🔧

Semiconductor Test and Timing Correlation

The THS788PFDT is useful in automated semiconductor test systems that need to compare propagation delay across several device paths or reference fixtures. The sync channel establishes time zero, and the external 200 MHz controller clock supports 13 ps TDC resolution with 8 ps single-shot accuracy. This allows a test controller to capture compact timing data instead of relying on oscilloscope-style continuous acquisition. For stable results, calibrate the fixture and cable delays, use a low-jitter clock source, and separate the timing network from high-current switching on the tester. The 100-terminal HTQFP footprint provides extensive interface and power connectivity but requires careful power-plane and exposed-pad design.

What is the THS788PFDT and what does it measure?
The THS788PFDT is a four-channel time measurement unit that uses time-to-digital converter technology to measure the arrival interval between an event input and a synchronization reference. According to the Texas Instruments product page, it provides 8 ps single-shot accuracy, 13 ps TDC resolution, and LVDS-compatible event inputs. It is intended for precision time-interval measurement rather than ordinary counting or clock generation.
What is the timing resolution of the THS788PFDT?
The THS788PFDT provides a 13 ps time-to-digital-converter least-significant-bit resolution derived from an external 200 MHz controller clock. The manufacturer product page also states 8 ps single-shot accuracy. These figures describe picosecond-class interval capture, so the practical result also depends on reference-clock distribution, calibration, input signal integrity, and the systematic error of the complete measurement system.
How many channels does the THS788PFDT have?
The THS788PFDT has four timing-measurement channels. An event arriving on a channel is compared with the sync-channel reference, which establishes time zero, and the interval is then modified by the applicable calibration value. Its four-channel architecture makes it suitable for systems that need to correlate several pulse events or compare multiple delay paths against one common reference.
Which package does the THS788PFDT use?
The THS788PFDT is offered in a 100-terminal HTQFP package measuring 14 x 14 mm and featuring an exposed pad. The device is designed for surface-mount assembly, and its terminal finish is listed as nickel palladium gold. Use the package drawing and land pattern in the manufacturer datasheet for the exposed-pad connection, paste pattern, and thermal-via arrangement.
What is the THS788PFDT sync channel used for?
The THS788PFDT sync channel defines the reference point, or time zero, for each timing measurement. An event edge captured by a measurement channel is then compared with that reference and converted into a digital time difference before calibration is applied. The manufacturer documentation identifies the sync input as the functional reference for the TMU measurement path.
What is the difference between THS788PFDT and THS788PFD?
THS788PFD and THS788PFDT identify ordering variants of the same THS788 time-measurement device, with the final suffix distinguishing the packing form. The T suffix denotes the surface-mount tape-and-reel ordering option. Both belong to the same family, but the package drawing and ordering information must be matched exactly before treating one as a replacement for the other.
Can the THS788PFDT replace another time measurement unit directly?
The THS788PFDT is most safely used as a like-for-like substitution within the THS788 family because it depends on a specific 100-terminal land pattern, exposed-pad connection, 200 MHz reference architecture, and LVDS-compatible event interface. No cross-manufacturer pin-compatible equivalent was identified in the available substitution records, so a functional alternative should not be treated as a drop-in replacement without a full interface and timing review.
What is the best drop-in replacement for THS788PFDT?
The closest same-family drop-in candidate is the THS788PFD, which uses the same THS788 device family and 100-terminal HTQFP construction; its distinguishing feature is the packing suffix rather than a change in the timing architecture. A second same-device reference is the SN26788PFD designation appearing in the manufacturer datasheet record. Verify the exact ordering code, exposed-pad connection, and PCB footprint before substitution.
Where can I download the THS788PFDT datasheet PDF?
The official THS788PFDT datasheet is available through Texas Instruments at the product document link for the THS788 family. The datasheet is identified as revision D and provides the device description, timing characteristics, pin information, and application details. Use the pin-description table and package drawing in that document when assigning PCB nets and thermal-via patterns.
Where can I find the THS788PFDT pinout?
The authoritative THS788PFDT pinout is in the pin-configuration section of the Texas Instruments THS788 datasheet revision D. The device uses a 100-terminal HTQFP footprint, so verify every differential input, supply, ground, clock, control, and data connection against the published pin table. Do not infer pin functions from the exposed-pad geometry or from a generic QFP symbol.
When should I choose the THS788PFDT over a conventional timer?
Choose the THS788PFDT when an application must resolve closely spaced events with picosecond-class accuracy and compare several channels against a common synchronization input. A conventional timer or counter is better suited to periodic frequency measurement, long-duration event counting, or general control loops. The THS788PFDT adds specialized TDC hardware, LVDS-compatible event capture, and calibration-dependent interval measurement.
Is the THS788PFDT suitable for pulsed-laser range measurement?
The THS788PFDT is well suited to pulsed-laser range measurement because it captures the relative arrival time of a start or synchronization pulse and a return event at picosecond-class resolution. The system must also provide a stable 200 MHz controller clock, clean LVDS-compatible event signals, and correct calibration for optical and electronic delays before converting time into distance.
How should the 200 MHz clock be routed for the THS788PFDT?
Route the 200 MHz reference as a short, controlled-impedance clock network with minimal spurs and matched terminations according to the manufacturer interface guidance. Keep the clock away from switching-power inductors, high-current output edges, and unrelated high-speed data traces. Poor reference integrity can degrade code-to-time calibration even though the TDC itself has a 13 ps least-significant-bit resolution.
What is the thermal design requirement for the THS788PFDT?
The THS788PFDT uses a 100-terminal HTQFP with an exposed pad, so the pad should be connected to the ground plane and thermally coupled using the manufacturer-recommended via arrangement. Avoid creating a thermal isolation slot beneath the device. A solid ground reference beneath the package also supports controlled-impedance return paths for the high-speed event and clock interfaces.
How do I buy the THS788PFDT and check current availability?
Use the Request a Quote form on this page to request current availability, lead time, and an order quotation for THS788PFDT. The manufacturer product page and authorized distributor listings identify the device as a quad-channel timing IC in a 100-HTQFP package. Because this specialized timing component can move through a limited distribution network, confirm the required quantity and manufacturing schedule before releasing the order.
What are the key specifications of THS788PFDT that engineers should know?
The essential THS788PFDT specifications are four measurement channels, 8 ps single-shot accuracy, 13 ps TDC resolution, a 200 MHz external controller clock, LVDS-compatible event inputs, and a 100-terminal 14 x 14 mm HTQFP package. These figures come from the Texas Instruments THS788 product documentation. The device also requires a synchronization reference, calibration data, and controlled-impedance routing for accurate system-level results.

Dados de referência de engenharia para THS788PFDT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the THS788PFDT when the system needs four event channels, picosecond-class interval measurement, and fast LVDS-compatible inputs referenced to a synchronization pulse. The 200 MHz external clock and 13 ps TDC resolution make it appropriate for time-of-flight ranging, optical skew analysis, trigger correlation, and precision test systems. Choose the THS788PFD when the mechanical ordering variant matches the PCB assembly process more closely; its timing ratings and 100-terminal HTQFP architecture are the same. The SN26788PFD designation appearing in the manufacturer documentation is another same-family reference, but its ordering markings and intended procurement channel should be confirmed before use. A conventional timer is preferable for basic frequency counting, long event counts, or non-picosecond timing, because the THS788 family requires a disciplined reference clock, calibrated event paths, and careful high-speed layout.

Comparação com alternativas

Parâmetro Este produto THS788PFD SN26788PFD
Package 100-HTQFP (14 x 14 mm) 100-HTQFP (14 x 14 mm) 100-HTQFP (14 x 14 mm)
Brand Texas Instruments Texas Instruments Texas Instruments
Device Type Quad-Channel Time Measurement Unit Quad-Channel Time Measurement Unit Quad-Channel Time Measurement Unit
Measurement Channels 4 channels 4 channels 4 channels
Single-Shot Accuracy 8 ps 8 ps 8 ps
TDC Resolution 13 ps LSB 13 ps LSB 13 ps LSB
External Controller Clock 200 MHz 200 MHz 200 MHz
Event Input Interface Fast LVDS-compatible Fast LVDS-compatible Fast LVDS-compatible
Output Count 1 output 1 output 1 output
Temperature Grade Commercial Commercial Commercial

Principais diferenciais

  • Four-channel picosecond-class interval capture in one device (vs THS788PFD)
  • TDC resolution tied to a 200 MHz controller clock (vs SN26788PFD)
  • Specialized synchronization-based measurement rather than general timer counting (vs THS788PFD)

Notas de projeto

Treat the 200 MHz controller clock as a critical analog timing reference rather than an ordinary digital clock. Use the interface and termination guidance in the manufacturer datasheet, keep the clock route short, and isolate it from switching power stages and high-current digital edges. Apply channel calibration after installation because fixture, cable, and board-propagation delays can otherwise exceed the nominal 13 ps TDC least-significant-bit interval.

Route the LVDS-compatible event inputs as controlled-impedance nets with continuous return paths beneath the pair. Keep the sync input and measured event channels away from clocks that are intentionally asynchronous to the measurement, and avoid stubs or test-point discontinuities on timing-critical nets. Preserve channel symmetry because mismatched input delay contributes directly to channel-to-channel timing error.

The 100-terminal HTQFP includes an exposed pad that must follow the manufacturer land pattern for solder, paste, and thermal vias. Connect the pad to the ground plane as specified and avoid a thermal isolation slot beneath the device. A continuous ground reference also helps the high-speed interfaces; the same copper area supports heat spreading during repeated time-to-digital conversions.

Do not treat the sync input as another ordinary measurement channel. It establishes time zero, and each event result is calculated relative to that reference and then modified by the applicable calibration value. Also avoid assuming that 8 ps single-shot accuracy is an absolute board-level guarantee: calibration quality, clock jitter, input noise, and propagation differences all contribute to the final result.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Commercial temperature grade and nickel palladium gold terminal finish are identified. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the available product records.

Dados verificados em: 2026-11-16 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

THS788PFDT datasheet THS788PFDT pinout THS788PFDT datasheet pdf THS788PFDT replacement THS788PFDT equivalent THS788PFDT price THS788PFDT stock THS788PFDT vs THS788PFD Texas Instruments THS788PFDT 4 channel 200MHz TDC IC 100 HTQFP time measurement unit 8 ps single shot timing IC THS788 pulsed laser range measurement THS788 optical communication timing

Componentes & termos relacionados

Texas Instruments THS788PFDT THS788PFD SN26788PFD quad-channel time measurement unit TMU time-to-digital converter TDC picosecond timing resolution 8 ps single-shot accuracy 13 ps LSB 200 MHz controller clock LVDS-compatible interface synchronization reference time zero hit latch 100-HTQFP HTQFP package family surface-mount semiconductor pulsed-laser range measurement optical communication timing radar instrumentation high-speed trigger correlation clock and timing IC
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ