Texas Instruments

TLV2773CD - Dual 5.1MHz R-R Op Amp | Texas Instruments

N.º da peça: TLV2773CD ✓ Ativo
2.7 V Vdss 14-pin SOIC Package
MOQ: 1 |

TLV2773CD Visão geral

The Texas Instruments TLV2773CD is a dual, rail-to-rail output operational amplifier with shutdown, a 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and a 10.5 V/µs slew rate in a 14-pin SOIC package. It combines two amplifier channels, shutdown control, and low-power operation in one circuit for compact signal-conditioning designs.

An operational amplifier, or op amp, is a voltage amplifier whose closed-loop behavior is determined mainly by external feedback components. The TLV2773 belongs to the linear amplifier hierarchy, combining rail-to-rail output capability, wide bandwidth, and shutdown control in a dual amplifier. These characteristics place it between general-purpose precision amplifiers and high-speed buffer-oriented devices.

The TLV2773's 5.1 MHz gain-bandwidth product supports signal amplification over a broad range of frequencies. Its 10.5 V/µs slew rate allows the output to move rapidly between voltage levels, which is useful when driving moderate capacitive loads or processing rapidly changing waveforms. Rail-to-rail output operation provides usable output-voltage range close to the supply rails, while shutdown support can reduce system power when the amplifier is not needed.

The 14-pin SOIC package contains two amplifier channels and the associated shutdown and supply connections. Because the part operates from a low-voltage 5.5 V maximum supply, it is particularly suitable for compact battery-powered equipment, portable instrumentation, low-voltage sensor interfaces, and consumer systems. Rail-to-rail output behavior helps preserve signal swing in applications where the usable output range is restricted by the available supply voltage.

Typical uses include sensor signal conditioning, low-voltage audio paths, portable measurement systems, control-loop amplifiers, and general-purpose buffering around sensors and mixed-signal systems. The shutdown function is especially useful in multi-function portable equipment where the amplifier may operate only during a measurement interval. Its bandwidth makes it preferable to slower precision-oriented amplifiers when waveform edges must be preserved.

When designing a circuit, account for the output-current capability, capacitive-load stability, input-common-mode range, and output-voltage swing before using the amplifier with large capacitive loads or unusual bias conditions. Keep sensitive input and feedback paths short, maintain stable reference and feedback components, and follow the manufacturer's recommended decoupling arrangement to minimize noise and instability.

This product data combines the manufacturer's device characteristics with application guidance, package-focused selection criteria, and a clear review of same-family replacement options. It is intended to help engineers confirm rail-to-rail operation, bandwidth, slew rate, shutdown behavior, and footprint compatibility before committing a 14-SOIC design to production.

Alternativas drop-in para TLV2773CD — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

TLV2773AID

✅ Drop-In ⚠️ Especificações não verificadas
📦 14-pin SOIC
Same-family 14-SOIC device with a 10% difference in the overall parameter assessment; exact temperature grade, shutdown behavior, and electrical limits require verification

📋 Alternativa de referência (fora do catálogo)

TLV2773CD Classificações máximas e características elétricas

Amplifier Type Dual operational amplifier with shutdown
Number of Channels 2 channels
Technology CMOS
Supply Voltage Minimum 2.7 V
Supply Voltage Maximum 5.5 V
Gain-Bandwidth Product 5.1 MHz
Slew Rate 10.5 V/µs
Output Rail-to-Rail Rail-to-rail output
Shutdown Function Yes
Encapsulamento 14-pin SOIC
Tipo de montagem Surface mount

Guia de Configuração de Pinos do TLV2773CD 14-pin soic

Configuração de pinos para TLV2773CD (pacote 14-pin soic). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 14-pin soic para TLV2773CD

Nenhum dado detalhado de pinagem disponível para TLV2773CD.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

TLV2773CD é adequado para 6 aplicaçãos: Portable Sensor Signal Conditioning, Low-Voltage Audio Signal Path, Portable Measurement and Instrumentation, Industrial Control and Monitoring, Battery-Powered IoT Sensor Node, Consumer Interface and Control.

🧩

Portable Sensor Signal Conditioning

The TLV2773CD fits low-voltage sensor front ends because its 2.7 V to 5.5 V supply range closely matches compact battery-powered systems. The dual configuration can amplify or buffer two related signals, while the 5.1 MHz gain-bandwidth product provides more responsiveness than a slow precision-oriented amplifier. Its 10.5 V/µs slew rate helps preserve signal transitions when the source impedance is low. The shutdown function can reduce activity during inactive measurement periods. Check the sensor output range against the amplifier's input limits and keep the feedback network close to the device.

🎧

Low-Voltage Audio Signal Path

The TLV2773CD is suitable for low-voltage audio buffering where the rail-to-rail output helps preserve signal swing near the supply limits. Its 10.5 V/µs slew rate handles changing waveforms without the slow edges associated with a general-purpose low-bandwidth amplifier, while the 5.1 MHz gain-bandwidth product provides ample bandwidth for many audio control and line-level paths. The 14-pin SOIC also allows both channels to be used in a compact circuit. Headroom and output-current requirements must be verified against the speaker or load being driven.

🖥️

Portable Measurement and Instrumentation

The TLV2773CD supports compact measurement equipment requiring two independent analog channels in a low-voltage environment. A 5.1 MHz gain-bandwidth product is useful for conditioning moderately fast sensor and test signals, and the 10.5 V/µs slew rate improves response to waveform edges. Operation from 2.7 V to 5.5 V supports battery-powered instruments, while shutdown enables a low-power state between measurement cycles. Designers should verify input bias current, offset voltage, common-mode range, and noise performance against the measurement accuracy required by the instrument.

🏭

Industrial Control and Monitoring

The TLV2773CD can serve as a general-purpose dual amplifier in compact industrial monitoring and control modules operating from a 2.7 V to 5.5 V supply. Rail-to-rail output operation provides improved signal range in low-voltage systems, and the 5.1 MHz bandwidth supports faster control or sensing signals than a slow universal amplifier. The shutdown input may be used to disable the amplifiers during inactive intervals. Industrial designs should account for temperature limits, noise immunity, grounding, and stable feedback components rather than relying on nominal performance alone.

🧩

Battery-Powered IoT Sensor Node

The TLV2773CD fits a compact IoT sensor node that conditions two low-voltage signals within a 2.7 V to 5.5 V supply envelope. Its dual-channel architecture reduces the number of separate amplifiers needed, while 5.1 MHz bandwidth and 10.5 V/µs slew rate provide responsive handling of sensor waveforms and digital transitions entering analog circuitry. The shutdown function supports power-aware operation when measurements are not continuously required. Low-power design should also evaluate the amplifier's quiescent current and the system's leakage budget using the manufacturer electrical characteristics.

📱

Consumer Interface and Control

The TLV2773CD can handle low-level interface and control signals in compact consumer electronics built around a 5 V rail. The dual channels can amplify or buffer two control paths, the rail-to-rail output improves usable voltage swing, and the 10.5 V/µs slew rate supports rapidly changing signals. Its 14-pin SOIC package simplifies assembly in a conventional surface-mount design. When driving ADC inputs, displays, or other downstream circuits, confirm output-current capability and capacitive-load stability and use short traces to minimize sensitivity to noise.

What is the TLV2773CD?
The TLV2773CD is a dual CMOS operational amplifier with rail-to-rail output, shutdown support, a 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and 10.5 V/µs slew rate. According to the Texas Instruments TLV2773 product page, the device is packaged for compact low-voltage designs in a 14-pin SOIC. Its two channels and shutdown function are useful in portable instrumentation, sensor interfaces, and low-voltage signal-conditioning circuits.
What are the key specifications of TLV2773CD that engineers should know?
The TLV2773CD combines two amplifier channels, a 2.7 V minimum supply, 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, rail-to-rail output, and shutdown in a 14-pin SOIC. Texas Instruments describes the device as a high-slew-rate, rail-to-rail output operational amplifier. These figures position it for low-voltage signal conditioning requiring more bandwidth than a general slow-precision amplifier.
What is the operating voltage of TLV2773CD?
The TLV2773CD operates from 2.7 V to 5.5 V according to the Texas Instruments product page. This low-voltage range suits battery-powered equipment, portable sensors, compact audio electronics, and other systems in which the amplifier must function without a higher supply voltage. The rails also constrain input and output swing, so signal ranges and bias points must remain compatible with the device operating limits.
What is the bandwidth and slew rate of TLV2773CD?
The TLV2773CD has a 5.1 MHz gain-bandwidth product and a 10.5 V/µs slew rate, according to the Texas Instruments TLV2773 product page. The bandwidth indicates how rapidly the closed-loop amplifier can amplify higher-frequency signals, while slew rate describes how quickly its output can change voltage. These values make the device suitable for signal conditioning and moderate dynamic-range waveform applications.
Does the TLV2773CD have a shutdown function?
Yes, the TLV2773CD includes a shutdown function, and the Texas Instruments product page identifies the TLV2773 as a dual operational amplifier with shutdown. Shutdown is useful in portable and multi-function systems where the amplifier can be disabled during inactive intervals. The shutdown logic level and timing behavior should be confirmed in the manufacturer datasheet before defining system-control firmware.
Where can I download the TLV2773CD datasheet PDF?
The official TLV2773 datasheet is available through the Texas Instruments document link at https://www.ti.com/lit/gpn/TLV2773, and the device page is located at https://www.ti.com/product/TLV2773. Use the manufacturer document for the complete pin description, electrical characteristics, recommended operating conditions, and application guidance. The TLV2773CD ordering information identifies the part as the 14-SOIC configuration.
Where can I find the TLV2773CD pinout?
The TLV2773CD pinout is found in the pin-configuration section of the Texas Instruments TLV2773 datasheet at https://www.ti.com/lit/gpn/TLV2773. The package is a 14-pin SOIC containing two operational-amplifier channels and shutdown-related connections. Use the manufacturer pin-description table when assigning PCB nets so that supply, ground, input, output, and shutdown functions are mapped to the correct terminals.
When should I choose TLV2773CD over a slower operational amplifier?
Choose the TLV2773CD when a design needs more than a slow general-purpose amplifier but does not require a high-voltage or very high-speed signal path. Its 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, dual channels, and shutdown support provide a practical balance for 2.7 V to 5.5 V portable systems. A precision amplifier may be preferable when offset and drift dominate the application.
Is TLV2773CD suitable for sensor signal conditioning?
The TLV2773CD is suitable for many low-voltage sensor signal-conditioning applications because it offers 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, dual channels, and a 2.7 V to 5.5 V supply range. It can amplify sensor outputs into an analog measurement or control path. The sensor output range, required accuracy, common-mode limits, and noise requirements must still be checked against the circuit operating conditions.
What is the best drop-in replacement for TLV2773CD?
The TLV2773AID is a same-family Texas Instruments option for a 14-SOIC design requiring careful electrical and pin-function review. It is listed as a drop-in candidate at a 90% parameter match because the published family characteristics align closely, but shutdown logic, temperature grade, and exact ordering limits must be confirmed before substitution. Verify every pin and operating condition in the manufacturer documentation.
Can TLV2773AID replace TLV2773CD?
The TLV2773AID can be considered as a same-family 14-SOIC replacement for the TLV2773CD after functional validation. Its close bandwidth, slew-rate, supply-voltage, and dual-amplifier characteristics support a 90% parameter-match assessment. Before replacing the device, verify shutdown polarity and behavior, input and output ranges, temperature limits, decoupling requirements, and the manufacturer's recommended operating conditions.
What is the best cross-brand equivalent for TLV2773CD?
No cross-brand drop-in equivalent is established for TLV2773CD in the available engineering records. The safest replacement path is to use a documented same-family Texas Instruments option or compare a competitor directly against the shutdown pinout, 2.7 V to 5.5 V supply range, 5.1 MHz bandwidth, 10.5 V/µs slew rate, and 14-SOIC footprint before approving it for a PCB redesign-free substitution.
TLV2773CD vs TLV2773AID: which is better for a portable device?
The TLV2773CD is the primary choice when its documented 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, 2.7 V to 5.5 V supply range, dual channels, and shutdown match the design. The TLV2773AID is the closer same-family option when its specific electrical limits and temperature grade satisfy the product requirements. Both use a 14-SOIC format, but shutdown behavior and operating limits still require verification.
What is the difference between TLV2773CD and TLV2773AID?
The TLV2773CD and TLV2773AID are closely related Texas Instruments dual operational amplifiers associated with the same 14-SOIC footprint. The principal differences to check are the precise electrical limits, temperature grade, ordering information, and any revised performance or shutdown characteristics. The cross-reference assessment assigns a 90% parameter match because these device-specific details must still be reconciled with the target circuit.
Where to buy TLV2773CD online?
Use the Request a Quote form on this page to request TLV2773CD availability, current commercial terms, and shipment scheduling. The part is offered in a 14-pin SOIC package by Texas Instruments. Current channel availability and the exact order quantity can change, so obtain a written quotation tied to the full MPN before placing a production order or arranging manufacturing material.
What is the price and lead time of TLV2773CD?
Current TLV2773CD pricing, stock position, minimum order quantity, and lead time are handled through the Request a Quote form on this page. The device is a dual 2.7 V to 5.5 V, 5.1 MHz operational amplifier in a 14-pin SOIC package. Providing the exact MPN, annual quantity, target date, and shipment destination allows the quotation to reflect the appropriate supply configuration.

Dados de referência de engenharia para TLV2773CD — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the TLV2773CD for a compact dual-channel design operating from 2.7 V to 5.5 V that benefits from rail-to-rail output, a 5.1 MHz gain-bandwidth product, a 10.5 V/µs slew rate, and shutdown control. It is particularly appropriate for portable sensing, low-voltage audio, measurement, and control paths where two analog channels are needed in one 14-SOIC package. Consider the TLV2773AID when it appears on an approved same-family substitution list, but verify shutdown behavior, temperature grade, and detailed electrical limits before release. For designs emphasizing offset, drift, or noise over bandwidth, evaluate a precision op amp instead. For cross-brand substitution, require an exact 14-pin pin-function match and independent confirmation of supply range, bandwidth, slew rate, output swing, and load stability; a similar headline specification alone is not sufficient for a drop-in claim.

Comparação com alternativas

Parâmetro Este produto TLV2773AID
Brand Texas Instruments Texas Instruments
Package 14-pin SOIC 14-pin SOIC
Amplifier Configuration Dual operational amplifier Dual operational amplifier
Parameter Match Reference part 90% drop-in assessment

Principais diferenciais

  • Combines dual amplification and shutdown in one package (vs TLV2773AID)
  • Designed for low-voltage portable systems (vs TLV2773AID)
  • Rail-to-rail output improves low-voltage signal range (vs TLV2773AID)

Notas de projeto

Place the device close to the signal source, feedback components, and bypass capacitors to minimize parasitic inductance and improve loop stability. Connect the supply pins to a low-impedance ground plane and follow the pin-configuration and decoupling guidance in the Texas Instruments datasheet. Keep output traces away from sensitive high-impedance input nodes, particularly when the amplifier is configured with high gain.

Use the 5.1 MHz gain-bandwidth product to select a feedback network whose closed-loop bandwidth remains appropriate for the intended signal. The 10.5 V/µs slew rate helps preserve larger-amplitude, faster edges, but it does not remove output-current or capacitive-load restrictions. Verify the load, output swing, and stability conditions in the manufacturer electrical characteristics before using the amplifier as a general-purpose buffer.

Do not assume that rail-to-rail output operation makes the input common-mode range unrestricted. Confirm that sensor and feedback voltages remain inside the operating limits for the selected supply. Likewise, use the shutdown control only after checking its polarity and timing behavior. A same-package replacement should also be checked for shutdown functionality, temperature grade, and every electrical limit before being approved for an existing layout.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The device is identified by Texas Instruments as a CMOS, dual, 2.7 V to 5.5 V operational amplifier with shutdown in a 14-SOIC package. Confirm current environmental and material compliance using the manufacturer product page and product documentation.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

TLV2773CD datasheet TLV2773CD pinout TLV2773CD datasheet pdf TLV2773CD equivalent TLV2773CD replacement TLV2773CD price TLV2773CD stock Texas Instruments TLV2773CD TLV2773CD 14-SOIC pinout TLV2773CD 5.1MHz specifications TLV2773CD shutdown application circuit TLV2773CD vs TLV2773AID

Componentes & termos relacionados

Texas Instruments TLV2773CD TLV2773AID operational amplifier op amp dual amplifier CMOS operational amplifier linear amplifier rail-to-rail output amplifier shutdown amplifier 5.1 MHz gain-bandwidth product 10.5 V/µs slew rate 2.7 V minimum supply 5.5 V maximum supply 14-pin SOIC SOIC package family surface-mount package SMD signal conditioning sensor interface portable instrumentation low-voltage audio shutdown control semiconductor
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ