TLV2773CD - Dual 5.1MHz R-R Op Amp | Texas Instruments
MPN: TLV2773CD ✓ Hoạt độngTLV2773CD Tóm tắt
An operational amplifier, or op amp, is a voltage amplifier whose closed-loop behavior is determined mainly by external feedback components. The TLV2773 belongs to the linear amplifier hierarchy, combining rail-to-rail output capability, wide bandwidth, and shutdown control in a dual amplifier. These characteristics place it between general-purpose precision amplifiers and high-speed buffer-oriented devices.
The TLV2773's 5.1 MHz gain-bandwidth product supports signal amplification over a broad range of frequencies. Its 10.5 V/µs slew rate allows the output to move rapidly between voltage levels, which is useful when driving moderate capacitive loads or processing rapidly changing waveforms. Rail-to-rail output operation provides usable output-voltage range close to the supply rails, while shutdown support can reduce system power when the amplifier is not needed.
The 14-pin SOIC package contains two amplifier channels and the associated shutdown and supply connections. Because the part operates from a low-voltage 5.5 V maximum supply, it is particularly suitable for compact battery-powered equipment, portable instrumentation, low-voltage sensor interfaces, and consumer systems. Rail-to-rail output behavior helps preserve signal swing in applications where the usable output range is restricted by the available supply voltage.
Typical uses include sensor signal conditioning, low-voltage audio paths, portable measurement systems, control-loop amplifiers, and general-purpose buffering around sensors and mixed-signal systems. The shutdown function is especially useful in multi-function portable equipment where the amplifier may operate only during a measurement interval. Its bandwidth makes it preferable to slower precision-oriented amplifiers when waveform edges must be preserved.
When designing a circuit, account for the output-current capability, capacitive-load stability, input-common-mode range, and output-voltage swing before using the amplifier with large capacitive loads or unusual bias conditions. Keep sensitive input and feedback paths short, maintain stable reference and feedback components, and follow the manufacturer's recommended decoupling arrangement to minimize noise and instability.
This product data combines the manufacturer's device characteristics with application guidance, package-focused selection criteria, and a clear review of same-family replacement options. It is intended to help engineers confirm rail-to-rail operation, bandwidth, slew rate, shutdown behavior, and footprint compatibility before committing a 14-SOIC design to production.
Bộ thay thế dễ dàng lắp đặt cho TLV2773CD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
TLV2773AID
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TLV2773CD Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Dual operational amplifier with shutdown |
| Number of Channels | 2 channels |
| Technology | CMOS |
| Supply Voltage Minimum | 2.7 V |
| Supply Voltage Maximum | 5.5 V |
| Gain-Bandwidth Product | 5.1 MHz |
| Slew Rate | 10.5 V/µs |
| Output Rail-to-Rail | Rail-to-rail output |
| Shutdown Function | Yes |
| Hộp | 14-pin SOIC |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân TLV2773CD 14-pin soic
Cấu hình chân cho TLV2773CD (14-pin soic gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TLV2773CD.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TLV2773CD phù hợp cho 6 Áp dụngs: Portable Sensor Signal Conditioning, Low-Voltage Audio Signal Path, Portable Measurement and Instrumentation, Industrial Control and Monitoring, Battery-Powered IoT Sensor Node, Consumer Interface and Control.
Portable Sensor Signal Conditioning
The TLV2773CD fits low-voltage sensor front ends because its 2.7 V to 5.5 V supply range closely matches compact battery-powered systems. The dual configuration can amplify or buffer two related signals, while the 5.1 MHz gain-bandwidth product provides more responsiveness than a slow precision-oriented amplifier. Its 10.5 V/µs slew rate helps preserve signal transitions when the source impedance is low. The shutdown function can reduce activity during inactive measurement periods. Check the sensor output range against the amplifier's input limits and keep the feedback network close to the device.
Được đề xuất
Low-Voltage Audio Signal Path
The TLV2773CD is suitable for low-voltage audio buffering where the rail-to-rail output helps preserve signal swing near the supply limits. Its 10.5 V/µs slew rate handles changing waveforms without the slow edges associated with a general-purpose low-bandwidth amplifier, while the 5.1 MHz gain-bandwidth product provides ample bandwidth for many audio control and line-level paths. The 14-pin SOIC also allows both channels to be used in a compact circuit. Headroom and output-current requirements must be verified against the speaker or load being driven.
Được đề xuất
Portable Measurement and Instrumentation
The TLV2773CD supports compact measurement equipment requiring two independent analog channels in a low-voltage environment. A 5.1 MHz gain-bandwidth product is useful for conditioning moderately fast sensor and test signals, and the 10.5 V/µs slew rate improves response to waveform edges. Operation from 2.7 V to 5.5 V supports battery-powered instruments, while shutdown enables a low-power state between measurement cycles. Designers should verify input bias current, offset voltage, common-mode range, and noise performance against the measurement accuracy required by the instrument.
Được đề xuất
Industrial Control and Monitoring
The TLV2773CD can serve as a general-purpose dual amplifier in compact industrial monitoring and control modules operating from a 2.7 V to 5.5 V supply. Rail-to-rail output operation provides improved signal range in low-voltage systems, and the 5.1 MHz bandwidth supports faster control or sensing signals than a slow universal amplifier. The shutdown input may be used to disable the amplifiers during inactive intervals. Industrial designs should account for temperature limits, noise immunity, grounding, and stable feedback components rather than relying on nominal performance alone.
Được đề xuất
Battery-Powered IoT Sensor Node
The TLV2773CD fits a compact IoT sensor node that conditions two low-voltage signals within a 2.7 V to 5.5 V supply envelope. Its dual-channel architecture reduces the number of separate amplifiers needed, while 5.1 MHz bandwidth and 10.5 V/µs slew rate provide responsive handling of sensor waveforms and digital transitions entering analog circuitry. The shutdown function supports power-aware operation when measurements are not continuously required. Low-power design should also evaluate the amplifier's quiescent current and the system's leakage budget using the manufacturer electrical characteristics.
Được đề xuất
Consumer Interface and Control
The TLV2773CD can handle low-level interface and control signals in compact consumer electronics built around a 5 V rail. The dual channels can amplify or buffer two control paths, the rail-to-rail output improves usable voltage swing, and the 10.5 V/µs slew rate supports rapidly changing signals. Its 14-pin SOIC package simplifies assembly in a conventional surface-mount design. When driving ADC inputs, displays, or other downstream circuits, confirm output-current capability and capacitive-load stability and use short traces to minimize sensitivity to noise.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho TLV2773CD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TLV2773AID |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 14-pin SOIC | 14-pin SOIC |
| Amplifier Configuration | Dual operational amplifier | Dual operational amplifier |
| Parameter Match | Reference part | 90% drop-in assessment |
Bảo phân biệt quan trọng
- Combines dual amplification and shutdown in one package (vsTLV2773AID)
- Designed for low-voltage portable systems (vsTLV2773AID)
- Rail-to-rail output improves low-voltage signal range (vsTLV2773AID)
Ghi chú thiết kế
Place the device close to the signal source, feedback components, and bypass capacitors to minimize parasitic inductance and improve loop stability. Connect the supply pins to a low-impedance ground plane and follow the pin-configuration and decoupling guidance in the Texas Instruments datasheet. Keep output traces away from sensitive high-impedance input nodes, particularly when the amplifier is configured with high gain.
Use the 5.1 MHz gain-bandwidth product to select a feedback network whose closed-loop bandwidth remains appropriate for the intended signal. The 10.5 V/µs slew rate helps preserve larger-amplitude, faster edges, but it does not remove output-current or capacitive-load restrictions. Verify the load, output swing, and stability conditions in the manufacturer electrical characteristics before using the amplifier as a general-purpose buffer.
Do not assume that rail-to-rail output operation makes the input common-mode range unrestricted. Confirm that sensor and feedback voltages remain inside the operating limits for the selected supply. Likewise, use the shutdown control only after checking its polarity and timing behavior. A same-package replacement should also be checked for shutdown functionality, temperature grade, and every electrical limit before being approved for an existing layout.
Thông tin tuân thủ
The device is identified by Texas Instruments as a CMOS, dual, 2.7 V to 5.5 V operational amplifier with shutdown in a 14-SOIC package. Confirm current environmental and material compliance using the manufacturer product page and product documentation.