TUSB2036VFG4 - 12Mbps 3-Port USB Hub | Texas Instruments
N.º da peça: TUSB2036VFG4 ✓ AtivoTUSB2036VFG4 Visão geral
A USB hub controller is a dedicated interface semiconductor that manages traffic between an upstream USB host and one or more downstream devices. It belongs to the USB interface IC hierarchy and broader interface semiconductor category. A full-speed USB 2.0 hub operates at 12 Mbps, making it appropriate for keyboards, mice, printers, human-interface devices, data acquisition equipment, and other peripherals that do not require high-speed or SuperSpeed USB signaling.
The TUSB2036VFG4 supports up to three downstream ports and can use a serial EEPROM for configuration storage when the application requires field-programmable hub behavior. Its digital state-machine implementation requires no firmware programming. A 3.3 V operating supply and full-speed USB operation simplify integration into equipment containing legacy USB peripherals, while the 32-LQFP package provides a conventional surface-mount footprint for industrial control, instrumentation, and embedded systems.
The TUSB2036 family uses a digital state machine rather than a microcontroller core to control hub functions. This architecture can reduce software complexity because port behavior is handled by dedicated hardware. The manufacturer describes the TUSB2036 as compliant with the USB 2.0 specification for 2/3-port, 12 Mbps full-speed operation. Exact port-disable, power-control, bus-power, and configuration behavior should be confirmed against the pin description and application information in the manufacturer datasheet before board release.
Typical uses include industrial test equipment, laboratory instruments, printers, point-of-sale terminals, embedded computers, and USB expansion cards. The hub can consolidate several low-speed or full-speed peripherals behind one upstream host connection. In self-powered equipment, designers must implement the required power-distribution architecture and ensure downstream devices receive adequate bus power. Systems with many high-current peripherals may require external power rather than relying entirely on the upstream USB supply.
PCB implementation should preserve short, impedance-controlled USB signal paths and provide solid ground-plane continuity between the controller and connected ports. Place USB differential lines as a matched pair, minimize stub lengths, and keep switching regulators and inductors away from the 12 Mbps data traces. Decoupling and protection components should follow the connection and routing guidance in the manufacturer datasheet.
This page combines manufacturer specifications, package and interface details, ordering guidance, comparison data, and practical integration notes. These engineering-focused details help designers determine whether the TUSB2036VFG4 fits a USB full-speed expansion requirement before beginning PCB layout or prototype assembly.
Alternativas drop-in para TUSB2036VFG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com TUSB2036VFG4 (mesmo formato e footprint) — diferindo em Package, Serial EEPROM Interface.
TUSB2036VF
✅ Drop-InConsulte o preço
Ver ficha técnica →TUSB2036VFG4 Especificações
| Product Type | USB 2.0 full-speed hub controller |
| Downstream Port Count | 2 or 3 ports |
| USB Data Rate | 12 Mbps |
| USB Speed Classification | Full-speed |
| Tensão de alimentação | 3.3 V |
| Process Technology | CMOS |
| Serial EEPROM Interface | Optional |
| Controller Architecture | Digital state machine; no firmware required |
| Encapsulamento | 32-LQFP, 7 mm x 7 mm |
| Contagem de pinos | 32 pins |
| Tipo de montagem | Surface mount |
| Faixa de temperatura de operação | 0 °C to 70 °C |
| Number of USB Upstream Ports | 1 port |
| USB Compliance | USB 2.0 full-speed operation |
| Packaging | Tray |
Guia de Configuração de Pinos do TUSB2036VFG4 32-lqfp, 7 mm x 7 mm
Configuração de pinos para TUSB2036VFG4 (pacote 32-lqfp, 7 mm x 7 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para TUSB2036VFG4.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
TUSB2036VFG4 é adequado para 6 aplicaçãos: Industrial USB Test Equipment, Embedded Computer USB Expansion, USB Printer and Scanner Hub, Point-of-Sale Terminal, Laboratory Data Acquisition Unit, USB-to-Ethernet Managed Gateway.
Industrial USB Test Equipment
The TUSB2036VFG4 expands one upstream full-speed USB connection into two or three downstream ports for industrial test and measurement equipment. Its 12 Mbps operation is appropriate for control interfaces, data loggers, scanners, and configuration adapters rather than high-speed storage. The hardware-based digital state machine requires no firmware, reducing the software burden on an embedded controller. Designers should use the manufacturer pin-description table for USB data routing and confirm that the 3.3 V supply and downstream power architecture meet all connected-device requirements.
Recomendado
Embedded Computer USB Expansion
The TUSB2036VFG4 adds compact full-speed USB expansion to embedded computers that need to connect several human-interface or peripheral devices. Two or three downstream ports at 12 Mbps cover keyboards, mice, printers, and service interfaces without adding a hub controller to a microcontroller or system-on-chip. Because the controller uses a digital state machine, no firmware is required. Board designers should route the upstream and downstream differential pairs as controlled-impedance USB connections and verify available power before attaching multiple peripheral loads.
Recomendado
USB Printer and Scanner Hub
The TUSB2036VFG4 is suited to compact printer, scanner, and document-capture systems that expose multiple full-speed peripherals through one host port. Its 12 Mbps full-speed operation matches the cited TUSB2036 family capability, while the 2/3-port architecture allows shared use of a keyboard, pointer, or authentication accessory alongside a peripheral. The 32-LQFP footprint supports compact designs, but designers must account for downstream current, cable shielding, ESD protection, and proper separation of USB traces from noisy power-conversion components.
Recomendado
Point-of-Sale Terminal
A point-of-sale terminal can use the TUSB2036VFG4 to consolidate full-speed peripherals such as keyboards, barcode scanners, receipt printers, and customer-facing devices behind a single upstream USB interface. The hardware-only control architecture avoids firmware programming and helps simplify embedded software startup. Because several retail peripherals may draw current simultaneously, the design should include deliberate power budgeting, overcurrent protection, and the manufacturer’s recommended hub power configuration rather than assuming every port can source its maximum current from the host.
Recomendado
Laboratory Data Acquisition Unit
The TUSB2036VFG4 provides a practical interface for laboratory acquisition units that must expose several full-speed USB devices to a host computer. It can support control, logging, calibration, and auxiliary peripherals without assigning USB enumeration tasks to the primary embedded processor. The controller’s 12 Mbps full-speed mode is adequate for many instrumentation peripherals but not for high-rate streaming. Preserve signal integrity with short matched USB traces, continuous ground planes, and controlled connector placement, while following the data-sheet recommendations for decoupling and protection.
Recomendado
USB-to-Ethernet Managed Gateway
The TUSB2036VFG4 can complement an Ethernet interface in a managed USB gateway by exposing full-speed peripherals through a dedicated hub-controller path. This arrangement can connect local configuration, diagnostic, or security accessories while the gateway’s primary network interface handles higher-speed data transfer. The TUSB2036’s hardware state machine makes the hub path independent of host firmware, while the 3.3 V interface simplifies integration with current-generation embedded controllers. Separate USB and Ethernet routing regions to reduce crosstalk and maintain robust ground continuity.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para TUSB2036VFG4 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | TUSB2036VF |
|---|---|---|
| Package | 32-LQFP (7x7) | 32-LQFP (7x7) |
| Brand | Texas Instruments | Texas Instruments |
| Device Type | 2/3-port USB full-speed hub controller | 2/3-port USB full-speed hub controller |
| USB Data Rate | 12 Mbps | 12 Mbps |
| Operating Supply | 3.3 V | 3.3 V |
| Downstream Ports | 2 or 3 ports | 2 or 3 ports |
| Serial EEPROM Support | Optional | Optional |
| Firmware Requirement | No firmware; digital state machine | No firmware; digital state machine |
| Operating Temperature | 0 °C to 70 °C | 0 °C to 70 °C |
| Orderable Suffix | VFG4 | VF |
Principais diferenciais
- Dedicated full-speed hub functionality (vs TUSB2036VF)
- No firmware requirement (vs TUSB2036VF)
- Compact established surface-mount footprint (vs TUSB2036VF)
Notas de projeto
Route each upstream and downstream USB differential pair as a matched, controlled-impedance connection with minimal stubs and length imbalance. Keep the complete USB path away from switching-regulator switches, inductors, and high-current output wiring. A continuous ground plane beneath the traces improves return-path continuity, while connector placement should avoid forcing USB signals through noisy power-conversion regions.
Budget upstream and downstream USB power separately before selecting protection components and PCB copper. The TUSB2036VFG4 is a 3.3 V controller, while attached peripherals may draw current from the USB bus. Follow the manufacturer’s power-distribution and current-limit requirements, provide adequate local decoupling, and use protection devices whose capacitance and voltage ratings are suitable for the 12 Mbps signal path.
Do not treat a 12 Mbps full-speed hub as a high-speed USB 2.0 hub. External storage, cameras, and other bandwidth-intensive peripherals may perform poorly or fail enumeration requirements at full speed. Also avoid assigning pins from a generic USB-hub schematic: use the TUSB2036 datasheet pin-description table, verify the selected port connections, and confirm EEPROM settings before releasing the PCB.
Preserve the intended USB connector and trace geometry through the TUSB2036VFG4 rather than introducing long fanouts between the controller and ports. Place protection and termination components close to their associated connectors, observe connector differential-pair ordering, and provide adequate copper and thermal pathways around the LQFP. Review the manufacturer layout guidance for capacitance, stub length, and via usage before final routing.
Informações de conformidade
The visible manufacturer and distributor listings do not explicitly state the requested compliance statuses. The 0 °C to 70 °C product family is not presented as an AEC-Q100-qualified automotive device.