Texas Instruments

TUSB2036VFG4 - 12Mbps 3-Port USB Hub | Texas Instruments

料号: TUSB2036VFG4 ✓ 量产中
3.3 V Vdss 32-LQFP, 7 mm x 7 mm Package Full-speed Speed Optional Memory
最小起订量: 1 |

TUSB2036VFG4 概述

Texas Instruments TUSB2036VFG4 is a 3.3 V CMOS USB 2.0 full-speed hub controller with a 12 Mbps data rate, two or three downstream ports, and an optional serial EEPROM interface. The device is packaged in a 32-pin LQFP measuring 7 mm by 7 mm. It is designed for systems that need to expand one USB host connection into multiple full-speed peripheral ports without requiring firmware or an external microcontroller.

A USB hub controller is a dedicated interface semiconductor that manages traffic between an upstream USB host and one or more downstream devices. It belongs to the USB interface IC hierarchy and broader interface semiconductor category. A full-speed USB 2.0 hub operates at 12 Mbps, making it appropriate for keyboards, mice, printers, human-interface devices, data acquisition equipment, and other peripherals that do not require high-speed or SuperSpeed USB signaling.

The TUSB2036VFG4 supports up to three downstream ports and can use a serial EEPROM for configuration storage when the application requires field-programmable hub behavior. Its digital state-machine implementation requires no firmware programming. A 3.3 V operating supply and full-speed USB operation simplify integration into equipment containing legacy USB peripherals, while the 32-LQFP package provides a conventional surface-mount footprint for industrial control, instrumentation, and embedded systems.

The TUSB2036 family uses a digital state machine rather than a microcontroller core to control hub functions. This architecture can reduce software complexity because port behavior is handled by dedicated hardware. The manufacturer describes the TUSB2036 as compliant with the USB 2.0 specification for 2/3-port, 12 Mbps full-speed operation. Exact port-disable, power-control, bus-power, and configuration behavior should be confirmed against the pin description and application information in the manufacturer datasheet before board release.

Typical uses include industrial test equipment, laboratory instruments, printers, point-of-sale terminals, embedded computers, and USB expansion cards. The hub can consolidate several low-speed or full-speed peripherals behind one upstream host connection. In self-powered equipment, designers must implement the required power-distribution architecture and ensure downstream devices receive adequate bus power. Systems with many high-current peripherals may require external power rather than relying entirely on the upstream USB supply.

PCB implementation should preserve short, impedance-controlled USB signal paths and provide solid ground-plane continuity between the controller and connected ports. Place USB differential lines as a matched pair, minimize stub lengths, and keep switching regulators and inductors away from the 12 Mbps data traces. Decoupling and protection components should follow the connection and routing guidance in the manufacturer datasheet.

This page combines manufacturer specifications, package and interface details, ordering guidance, comparison data, and practical integration notes. These engineering-focused details help designers determine whether the TUSB2036VFG4 fits a USB full-speed expansion requirement before beginning PCB layout or prototype assembly.

直接替换替代料: TUSB2036VFG4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: TUSB2036VFG4 (相同外形与封装尺寸) ——差异在于 Package, Serial EEPROM Interface.

Texas Instruments
Package: 32-LQFP (7x7 mm)
Serial EEPROM Interface: Optional, for custom configuration
对比 TUSB2036VFG4 →

TUSB2036VF

✅ 直接替换
Texas Instruments
📦 32-LQFP (7x7)
USB Hub Controller · USB 2.0 compliant (full-speed) · 12 Mbps (full-speed) · 2 or 3 (programmable) · 1 · 3.3 V · 3.3-V CMOS ASIC (digital state machine) · No (state-machine based)

联系询价

查看数据手册 →

TUSB2036VFG4 规格参数

Product Type USB 2.0 full-speed hub controller
Downstream Port Count 2 or 3 ports
USB Data Rate 12 Mbps
USB Speed Classification Full-speed
电源电压 3.3 V
Process Technology CMOS
Serial EEPROM Interface Optional
Controller Architecture Digital state machine; no firmware required
封装 32-LQFP, 7 mm x 7 mm
引脚数量 32 pins
安装类型 Surface mount
工作温度范围 0 °C to 70 °C
Number of USB Upstream Ports 1 port
USB Compliance USB 2.0 full-speed operation
Packaging Tray

TUSB2036VFG4 32-lqfp, 7 mm x 7 mm 引脚配置指南

TUSB2036VFG4(32-lqfp, 7 mm x 7 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

TUSB2036VFG4 的 32-lqfp, 7 mm x 7 mm 封装引脚图

暂无详细引脚数据: TUSB2036VFG4.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TUSB2036VFG4 适用于 6 应用s: Industrial USB Test Equipment, Embedded Computer USB Expansion, USB Printer and Scanner Hub, Point-of-Sale Terminal, Laboratory Data Acquisition Unit, USB-to-Ethernet Managed Gateway.

🏭

Industrial USB Test Equipment

The TUSB2036VFG4 expands one upstream full-speed USB connection into two or three downstream ports for industrial test and measurement equipment. Its 12 Mbps operation is appropriate for control interfaces, data loggers, scanners, and configuration adapters rather than high-speed storage. The hardware-based digital state machine requires no firmware, reducing the software burden on an embedded controller. Designers should use the manufacturer pin-description table for USB data routing and confirm that the 3.3 V supply and downstream power architecture meet all connected-device requirements.

🖥️

Embedded Computer USB Expansion

The TUSB2036VFG4 adds compact full-speed USB expansion to embedded computers that need to connect several human-interface or peripheral devices. Two or three downstream ports at 12 Mbps cover keyboards, mice, printers, and service interfaces without adding a hub controller to a microcontroller or system-on-chip. Because the controller uses a digital state machine, no firmware is required. Board designers should route the upstream and downstream differential pairs as controlled-impedance USB connections and verify available power before attaching multiple peripheral loads.

🖨️

USB Printer and Scanner Hub

The TUSB2036VFG4 is suited to compact printer, scanner, and document-capture systems that expose multiple full-speed peripherals through one host port. Its 12 Mbps full-speed operation matches the cited TUSB2036 family capability, while the 2/3-port architecture allows shared use of a keyboard, pointer, or authentication accessory alongside a peripheral. The 32-LQFP footprint supports compact designs, but designers must account for downstream current, cable shielding, ESD protection, and proper separation of USB traces from noisy power-conversion components.

🏬

Point-of-Sale Terminal

A point-of-sale terminal can use the TUSB2036VFG4 to consolidate full-speed peripherals such as keyboards, barcode scanners, receipt printers, and customer-facing devices behind a single upstream USB interface. The hardware-only control architecture avoids firmware programming and helps simplify embedded software startup. Because several retail peripherals may draw current simultaneously, the design should include deliberate power budgeting, overcurrent protection, and the manufacturer’s recommended hub power configuration rather than assuming every port can source its maximum current from the host.

📟

Laboratory Data Acquisition Unit

The TUSB2036VFG4 provides a practical interface for laboratory acquisition units that must expose several full-speed USB devices to a host computer. It can support control, logging, calibration, and auxiliary peripherals without assigning USB enumeration tasks to the primary embedded processor. The controller’s 12 Mbps full-speed mode is adequate for many instrumentation peripherals but not for high-rate streaming. Preserve signal integrity with short matched USB traces, continuous ground planes, and controlled connector placement, while following the data-sheet recommendations for decoupling and protection.

🌐

USB-to-Ethernet Managed Gateway

The TUSB2036VFG4 can complement an Ethernet interface in a managed USB gateway by exposing full-speed peripherals through a dedicated hub-controller path. This arrangement can connect local configuration, diagnostic, or security accessories while the gateway’s primary network interface handles higher-speed data transfer. The TUSB2036’s hardware state machine makes the hub path independent of host firmware, while the 3.3 V interface simplifies integration with current-generation embedded controllers. Separate USB and Ethernet routing regions to reduce crosstalk and maintain robust ground continuity.

What is the TUSB2036VFG4?
The TUSB2036VFG4 is a Texas Instruments 3.3 V USB 2.0 full-speed hub controller that provides up to three downstream ports at 12 Mbps. It uses a 32-LQFP, 7 mm by 7 mm package and an optional serial EEPROM interface. According to the TUSB2036 manufacturer product page, the controller is based on a digital state machine and requires no firmware programming, making it suitable for adding multiple USB peripheral ports to one upstream host connection.
How many USB ports does TUSB2036VFG4 support?
The TUSB2036VFG4 supports two or three downstream USB ports in addition to its upstream connection. Texas Instruments describes the device as a 2/3-port hub for full-speed USB operation. The exact port population depends on board configuration, power architecture, and the device connection settings defined by the manufacturer. For equipment requiring more than three downstream ports, cascade multiple hubs or evaluate a higher-port-count USB hub controller.
What USB speed is supported by TUSB2036VFG4?
The TUSB2036VFG4 supports 12 Mbps full-speed USB as stated on the Texas Instruments TUSB2036 product page. This makes it suitable for keyboards, mice, printers, data-acquisition peripherals, and other USB 2.0 full-speed devices. It does not provide SuperSpeed operation, so high-bandwidth storage, high-resolution video, or other high-speed USB peripherals should be connected through a separate high-speed USB 2.0 or SuperSpeed hub.
Does TUSB2036VFG4 require firmware programming?
No, the TUSB2036VFG4 does not require firmware programming for normal hub operation. Texas Instruments describes the hub as being implemented with a digital state machine instead of a microcontroller. Optional serial EEPROM support can be used when the design needs nonvolatile configuration storage. System designers should still use the manufacturer’s configuration tables and EEPROM procedure when implementing a customized descriptor or port-control strategy.
Where can I download the TUSB2036VFG4 datasheet PDF?
The official TUSB2036 product page at Texas Instruments provides the manufacturer datasheet and supporting documentation. Use the linked datasheet to confirm the complete 32-pin assignment, electrical limits, recommended application circuit, and USB routing guidance before PCB layout. The TUSB2036VFG4 ordering information identifies the part as a 32-LQFP device; the family documentation covers the electrical behavior shared by its supported orderable variants.
Where can I find the TUSB2036VFG4 pinout?
The TUSB2036VFG4 pinout is presented in the pin-description table of the official Texas Instruments TUSB2036 datasheet. The device uses a 32-LQFP package, so all 32 positions must be assigned before schematic capture is released. Assign USB data, power-control, configuration, ground, and supply pins directly from the manufacturer table rather than relying on a generic USB-hub pinout, since auxiliary signal assignments can vary within the device family.
Can TUSB2036VFG4 be used with USB keyboards and mice?
Yes, the TUSB2036VFG4 is well matched to keyboards, mice, scanners, and similar full-speed or low-speed USB peripherals. Its 12 Mbps full-speed hub operation and two- or three-port configuration allow several devices to share one upstream USB connection. The system must still provide adequate downstream bus power and follow the USB enumeration and current-limit requirements described in the manufacturer documentation.
What is the difference between TUSB2036VFG4 and TUSB2036VF?
The TUSB2036VFG4 and TUSB2036VF identify orderable versions of the same TUSB2036 hub-controller family with a 32-LQFP package, 3.3 V operation, and 2/3-port full-speed USB behavior. Texas Instruments lists TUSB2036VF as the family orderable associated with TUSB2036VFG4. The visible ordering information does not establish a meaningful electrical distinction, so engineers should treat them as electrically equivalent ordering alternatives and verify the exact suffix against their required packaging and lead-free procurement specifications.
Is TUSB2036VFG4 suitable for industrial instrumentation?
The TUSB2036VFG4 is suitable for many industrial instrumentation designs requiring one upstream USB connection and multiple full-speed peripherals. Its specified 0 °C to 70 °C operating range supports room-temperature commercial and industrial equipment, while its 3.3 V CMOS implementation avoids firmware development. For installations extending beyond 70 °C, select a temperature-qualified variant or use a hub controller with an appropriate extended-temperature rating.
Where can I buy TUSB2036VFG4 and check its current lead time?
Use the “Request a Quote” form on this page to request the current TUSB2036VFG4 price, stock status, minimum order quantity, and lead time. The manufacturer product page and the listed inventory channels support sourcing for this exact orderable part, but availability can change without notice. Provide your required quantity, packaging preference, and production schedule so the quotation can reflect the appropriate supply conditions.
What is the lead time for TUSB2036VFG4?
The current lead time for TUSB2036VFG4 is established through a quotation rather than a fixed product-page value. Submit a request through the “Request a Quote” form on this page with the required quantity and target delivery date. For production planning, distinguish standard catalog supply from scheduled orders and ask the supplier to identify any lot, traceability, or packaging constraints affecting the requested delivery schedule.
Is TUSB2036VFG4 in stock?
Stock for TUSB2036VFG4 can change by quantity and date, so the “Request a Quote” form on this page is the appropriate way to confirm current availability. Request the exact manufacturer part number, desired tray quantity, and delivery date. If your schedule requires a buffer, include your forecast and ask for an availability update rather than treating a catalog listing as a stock guarantee.
What is the best drop-in replacement for TUSB2036VFG4?
The closest documented drop-in choice is the Texas Instruments TUSB2036VF orderable in the same 32-LQFP hub-controller family. Texas Instruments identifies TUSB2036VF as associated with the same 3.3 V, 2/3-port, 12 Mbps full-speed device. Confirm the complete pin description and ordering suffix before substitution, and treat the absence of a verified cross-brand pin-compatible part as a reason to retain the original footprint.
Can TUSB2036VF replace TUSB2036VFG4 without PCB changes?
The TUSB2036VF can serve as the closest same-family drop-in candidate because Texas Instruments associates it with the same 32-LQFP TUSB2036 device and the same full-speed hub-controller function. The available ordering record does not reveal a measurable electrical difference, so compatibility is based on shared device construction rather than changed specifications. Verify suffix-specific ordering, packaging, and lifecycle details against the manufacturer’s current part-information table before production release.
When should I choose TUSB2036VFG4 instead of a higher-speed USB hub?
Choose the TUSB2036VFG4 when connected peripherals operate at USB full speed and the design needs only two or three downstream ports. Its 12 Mbps operation, 3.3 V supply, and no-firmware digital architecture fit keyboards, mice, printers, and basic instrumentation. Choose a high-speed USB 2.0 hub controller when peripherals require more than 12 Mbps, especially storage devices, cameras, or other bandwidth-intensive equipment.
What key specifications should engineers know about TUSB2036VFG4?
The TUSB2036VFG4 combines a 12 Mbps full-speed USB interface, two or three downstream ports, 3.3 V CMOS operation, optional serial EEPROM support, and a 32-LQFP 7 mm by 7 mm package. Texas Instruments specifies a digital-state-machine implementation that requires no firmware and an operating range of 0 °C to 70 °C. The same 32-LQFP footprint and 12 Mbps performance make the TUSB2036VF the closest documented family alternative.

工程参考数据: TUSB2036VFG4 ——对比、设计指导和合规信息。

选型指南

Choose the TUSB2036VFG4 when a compact system needs to expand one upstream USB connection into two or three 12 Mbps full-speed ports and can manage the power and signal-integrity requirements of a 32-LQFP hub controller. Its digital state machine eliminates firmware work, making it attractive for embedded instruments, printers, test equipment, and basic point-of-sale systems. The TUSB2036VF is the closest documented same-family drop-in candidate because it uses the same 32-LQFP footprint, 3.3 V supply, 2/3-port function, and 12 Mbps data rate; confirm the exact suffix and procurement requirements before substitution. Do not select this family for high-speed storage, uncompressed video, or other devices requiring more than 12 Mbps. For systems with more than three downstream ports, temperature requirements beyond 70 °C, or stricter automotive qualification, select a more suitable hub controller rather than forcing a cross-package redesign.

与替代料对比

参数 本产品 TUSB2036VF
Package 32-LQFP (7x7) 32-LQFP (7x7)
Brand Texas Instruments Texas Instruments
Device Type 2/3-port USB full-speed hub controller 2/3-port USB full-speed hub controller
USB Data Rate 12 Mbps 12 Mbps
Operating Supply 3.3 V 3.3 V
Downstream Ports 2 or 3 ports 2 or 3 ports
Serial EEPROM Support Optional Optional
Firmware Requirement No firmware; digital state machine No firmware; digital state machine
Operating Temperature 0 °C to 70 °C 0 °C to 70 °C
Orderable Suffix VFG4 VF

关键差异点

  • Dedicated full-speed hub functionality (对比 TUSB2036VF)
  • No firmware requirement (对比 TUSB2036VF)
  • Compact established surface-mount footprint (对比 TUSB2036VF)

设计说明

Route each upstream and downstream USB differential pair as a matched, controlled-impedance connection with minimal stubs and length imbalance. Keep the complete USB path away from switching-regulator switches, inductors, and high-current output wiring. A continuous ground plane beneath the traces improves return-path continuity, while connector placement should avoid forcing USB signals through noisy power-conversion regions.

Budget upstream and downstream USB power separately before selecting protection components and PCB copper. The TUSB2036VFG4 is a 3.3 V controller, while attached peripherals may draw current from the USB bus. Follow the manufacturer’s power-distribution and current-limit requirements, provide adequate local decoupling, and use protection devices whose capacitance and voltage ratings are suitable for the 12 Mbps signal path.

Do not treat a 12 Mbps full-speed hub as a high-speed USB 2.0 hub. External storage, cameras, and other bandwidth-intensive peripherals may perform poorly or fail enumeration requirements at full speed. Also avoid assigning pins from a generic USB-hub schematic: use the TUSB2036 datasheet pin-description table, verify the selected port connections, and confirm EEPROM settings before releasing the PCB.

Preserve the intended USB connector and trace geometry through the TUSB2036VFG4 rather than introducing long fanouts between the controller and ports. Place protection and termination components close to their associated connectors, observe connector differential-pair ordering, and provide adequate copper and thermal pathways around the LQFP. Review the manufacturer layout guidance for capacitance, stub length, and via usage before final routing.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The visible manufacturer and distributor listings do not explicitly state the requested compliance statuses. The 0 °C to 70 °C product family is not presented as an AEC-Q100-qualified automotive device.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

TUSB2036VFG4 datasheet TUSB2036VFG4 pinout TUSB2036VFG4 datasheet pdf TUSB2036VFG4 equivalent TUSB2036VFG4 replacement TUSB2036VFG4 cross reference TUSB2036VFG4 vs TUSB2036VF TUSB2036VFG4 32-LQFP footprint TUSB2036VFG4 application circuit TUSB2036 12Mbps USB hub TUSB2036VFG4 price TUSB2036VFG4 stock Texas Instruments TUSB2036VFG4

相关元器件 & 术语

Texas Instruments TUSB2036VFG4 TUSB2036VF TUSB2036 USB hub controller USB interface IC USB 2.0 full-speed USB 12 Mbps 2/3-port hub serial EEPROM interface digital state machine 3.3 V CMOS 32-LQFP LQFP family surface mount industrial test equipment laboratory instrumentation embedded computer point-of-sale terminal USB differential pair firmware-free operation 0 °C to 70 °C
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情