Microchip Technology

USB2532I-1080AEN 2-Port USB 2.0 Hub | Microchip

N.º da peça: USB2532I-1080AEN ✓ Ativo
36-pin SQFN, 6 x 6 mm Package 480 Mb/s Hi-Speed Speed
MOQ: 1 |

USB2532I-1080AEN Visão geral

The Microchip Technology USB2532I-1080AEN is an OEM-configurable USB 2.0 Hi-Speed hub controller with two downstream ports, supplied in a 36-pin SQFN package measuring 6 x 6 mm. It uses Multi-Transaction Translator technology, supports Full-Speed and Hi-Speed operation, and includes configurable internal self-powered or bus-powered operation for OEM hub designs.

A USB hub controller is an interface integrated circuit that manages transactions between an upstream USB host and one or more downstream peripherals. The USB2532 family belongs to the USB interface controller hierarchy, where USB 2.0 specifies the protocol behavior, Hi-Speed describes the 480 Mb/s operating mode, and MTT describes the hub transaction architecture. This combination allows one USB connection to expand into multiple downstream ports while retaining individual port management.

The controller provides two downstream ports and OEM-configurable behavior. According to the Microchip USB2532 product page, built-in default settings support either self-powered or bus-powered internal operation, giving designers flexibility in how power is distributed to attached devices. It also supports port mapping, port swapping, and PHY boost functions as configurable hub features. These functions can simplify product development and improve compatibility with different PCB layouts and downstream peripheral arrangements.

The USB2532 is compliant with the USB 2.0 Specification and the USB 2.0 Link Power Management Addendum. It can operate as a Full-Speed hub or as a Full-Speed and Hi-Speed hub. The industrial USB2532I-1080AEN ordering code is identified with a 36-SQFN, 6 x 6 mm package. Exact electrical limits, internal flash configuration, clock requirements, and absolute maximum ratings must be selected from the manufacturer datasheet before schematic release.

Typical applications include embedded USB expansion in industrial equipment, printers, test systems, storage peripherals, set-top equipment, and compact consumer products. The device is most appropriate where two downstream USB ports are required on the same board. Designers should reserve the exposed-pad and package-layout requirements shown in the manufacturer documentation, and should implement the recommended crystal, decoupling, and USB impedance network exactly as specified.

This product page consolidates the verified USB2532 family description, manufacturer documentation links, package identity, functional use cases, and qualified comparison context. It also identifies where detailed values must be checked in the USB2532 datasheet, including pin assignments, timing limits, configuration requirements, and environmental ratings, so engineers can move from part selection to an auditable hardware design.

For a drop-in sourcing decision, confirm the exact temperature grade, hub configuration, package dimensions, exposed-pad pattern, firmware or ROM settings, and downstream-port requirements. A similarly named hub controller should not be treated as interchangeable unless its complete pin list, electrical characteristics, configuration method, and reference layout match the USB2532I-1080AEN datasheet.

Alternativas drop-in para USB2532I-1080AEN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com USB2532I-1080AEN (mesmo formato e footprint) — diferindo em Package, Product Type, RoHS Status, USB Standard, Configuration Interface.

Microchip Technology
Product Type: USB 2.0 hub controller
RoHS Status: Compliant
USB Standard: USB 2.0
Comparar com USB2532I-1080AEN →
Microchip Technology
Package: 36-pin QFN (6x6 mm) with EP
RoHS Status: Compliant
USB Standard: USB 2.0 (Low/Full/Hi-Speed)
Comparar com USB2532I-1080AEN →
Microchip Technology
Package: 36-pin QFN (6x6 mm) with exposed pad
RoHS Status: Compliant
USB Standard: USB 2.0 (Low/Full/Hi-Speed)
Comparar com USB2532I-1080AEN →
Microchip Technology
Product Type: USB 2.0 two-port hub controller
RoHS Status: RoHS
Comparar com USB2532I-1080AEN →

USB2532-1080AEN

✅ Drop-In
Microchip Technology
📦 36-SQFN (6 x 6 mm)
USB 2.0 two-port hub controller · USB 2.0 · 2 ports · 1 port · 1.2 V and 3.3 V · I2C and SMBus · 0C to +70C · 36-SQFN

Consulte o preço

Ver ficha técnica →

USB2512BI-AEZG

✅ Drop-In
Microchip Technology
📦 36-SQFN (6 x 6 mm)
USB Hub Controller · USB 2.0 (Low/Full/Hi-Speed) · 2 · 3.3 V · 0°C to +70°C · I²C / SMBus configuration · 24 MHz external crystal · 36-pin QFN (6x6 mm) with EP

Consulte o preço

Ver ficha técnica →

USB2512B-AEZG

✅ Drop-In
Microchip Technology
📦 36-SQFN (6 x 6 mm)
USB 2.0 hub controller · 2 ports · USB 2.0 · 480 Mbps · Low-speed, full-speed, and high-speed · 3 V to 3.6 V · 3.3 V · I2C EEPROM and SMBus

Consulte o preço

Ver ficha técnica →

USB2514B-AEZC

✅ Drop-In
Microchip Technology
📦 36-SQFN (6 x 6 mm)
USB 2.0 Hi-Speed 4-Port Hub Controller · USB 2.0 (Low/Full/Hi-Speed) · 4 · 480 Mbps (Hi-Speed) · 3.0 V to 3.6 V · Yes (per downstream port, via external switch) · I2C / SMBus · PRTPWR outputs per port

Consulte o preço

Ver ficha técnica →

USB2534-1080AEN

✅ Drop-In
Microchip Technology
📦 36-SQFN (6 x 6 mm)
USB 2.0 hub controller · 4 ports · Full-Speed or Full-/Hi-Speed hub · USB 2.0 Specification and USB 2.0 Link Power Management Addendum · MTT (Multi-Transaction Translator) · 24 MHz · 3 V to 3.6 V · OEM configurable

Consulte o preço

Ver ficha técnica →

USB2532I-1080AEN Especificações

Product Type USB 2.0 Hi-Speed 2-port hub controller
USB Specification USB 2.0
Maximum USB Speed 480 Mb/s Hi-Speed
Downstream Port Count 2 ports
Upstream Port Count 1 port
Transaction Architecture MTT (Multi-Transaction Translator)
Operating Mode Full-Speed hub or Full-Speed and Hi-Speed hub
Internal Power Configuration Self-powered or bus-powered internal default settings
Link Power Management USB 2.0 Link Power Management Addendum compliant
Port Mapping Supported
Port Swapping Supported
PHY Boost Supported
Encapsulamento 36-pin SQFN, 6 x 6 mm
Tipo de montagem Surface mount
Maximum USB Bus-Speed Signal Rate 480 Mb/s

Guia de Configuração de Pinos do USB2532I-1080AEN 36-pin sqfn, 6 x 6 mm

Configuração de pinos para USB2532I-1080AEN (pacote 36-pin sqfn, 6 x 6 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 36-pin sqfn, 6 x 6 mm para USB2532I-1080AEN

Nenhum dado detalhado de pinagem disponível para USB2532I-1080AEN.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

USB2532I-1080AEN é adequado para 6 aplicaçãos: Industrial USB Expansion, Embedded Test and Measurement, USB Storage and Peripheral Hub, Embedded Computing, Network Equipment, Security and Surveillance.

🏭

Industrial USB Expansion

USB2532I-1080AEN fits industrial equipment that needs to expose two USB 2.0 downstream ports through one upstream host connection. Its MTT architecture supports Full-Speed and Full-/Hi-Speed hub arrangements, while configurable mapping, swapping, and PHY boost can simplify board integration. Use the industrial temperature grade only after confirming its numerical limits. Place USB differential routes with controlled impedance, provide the required decouplers, and follow the manufacturer exposed-pad layout. The controller's configurable internal power behavior helps accommodate different downstream-device power budgets without redesigning the entire hub board.

🖥️

Embedded Test and Measurement

USB2532I-1080AEN can provide a compact two-port USB hub function in automated test equipment, diagnostic systems, and laboratory peripherals. One upstream USB interface supports two downstream device connections, reducing host-port requirements while retaining USB 2.0 Hi-Speed operation up to 480 Mb/s. The hub can attach as a Full-Speed or Full-/Hi-Speed device, allowing compatibility with different test-host configurations. OEM-configurable port mapping and swapping help align logical enumeration with physical connectors, while PHY boost can assist signal conditioning. Validate cable length, impedance, grounding, and downstream power requirements in the final test fixture.

🔧

USB Storage and Peripheral Hub

USB2532I-1080AEN is suitable for storage appliances, printers, scanners, and compact peripherals that need two USB ports from one host connection. Its two downstream ports support USB 2.0 devices, and the device can operate as a Full-Speed hub when high-speed operation is unnecessary. Configurable internal power behavior is useful when devices require different power strategies, while port mapping and swapping can improve connector usability. The main engineering constraint is the total downstream current: each port must stay within its configured current limit, and the upstream supply must support the enabled loads. Add protection appropriate to the product enclosure and environment.

📱

Embedded Computing

USB2532I-1080AEN adds two downstream USB connections to an embedded computing platform without requiring a full host controller. The single upstream link can operate at Full-Speed or Hi-Speed, making the hub useful for keyboards, service interfaces, data acquisition accessories, and local configuration ports. Its low-power configurable design is especially useful where power budget varies with attached peripherals. Firmware should enumerate the hub after stable power is applied, and the board must implement the manufacturer's clock and decoupling requirements. Confirm boot-time USB behavior and hot-plug expectations because a bus-powered startup configuration can behave differently from a self-powered configuration.

🌐

Network Equipment

USB2532I-1080AEN can support service and maintenance connections in routers, switches, gateways, and other network appliances that need more than one USB interface. Two downstream ports can simplify field-service workflows by allowing a keyboard and flash drive or a maintenance adapter to coexist. The controller supports USB 2.0 Hi-Speed up to 480 Mb/s and configurable port mapping or swapping for easier product integration. In a network enclosure, maintain clean separation between data and power paths, provide robust downstream overcurrent protection, and verify the operating-temperature range for the installation environment. The hub must not become the sole path for critical network management functions.

🎥

Security and Surveillance

USB2532I-1080AEN can provide a two-port USB expansion function for surveillance controllers, access-control terminals, and camera accessories. One upstream interface accommodates two service or peripheral devices while preserving USB 2.0 compatibility. Port mapping and swapping allow the PCB connector arrangement to be matched to the enclosure, and configurable self-powered or bus-powered internal operation supports different peripheral classes. Because security equipment may remain continuously powered, calculate worst-case hub and downstream loads rather than typical consumption. Follow the manufacturer layout for differential routing and decouplers, and verify surge, ESD, temperature, and regulatory requirements for the installation environment.

What is USB2532I-1080AEN?
USB2532I-1080AEN is a Microchip Technology OEM-configurable USB 2.0 Hi-Speed hub controller with two downstream ports. It uses Multi-Transaction Translator technology and is packaged in a 36-pin SQFN measuring 6 x 6 mm. According to the Microchip USB2532 product page, the controller is intended for embedded USB expansion and supports self-powered or bus-powered internal configurations.
How many USB ports does USB2532I-1080AEN provide?
USB2532I-1080AEN provides one upstream connection and two downstream USB ports. The manufacturer describes the USB2532 as a two-port USB 2.0 Hi-Speed hub controller. It can operate as a Full-Speed hub or as a Full-Speed and Hi-Speed hub, allowing it to connect an upstream USB host to two downstream peripherals when the board, power budget, and hub configuration support both ports.
Where can I download the USB2532I-1080AEN datasheet PDF?
The USB2532I-1080AEN datasheet is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/00001701B.pdf. The document covers the USB2532 USB 2.0 Hi-Speed two-port hub controller. Use the pin-description table, electrical-characteristics section, and USB2532 reference-layout guidance when assigning signals and laying out the 36-pin SQFN PCB.
Where can I find the USB2532I-1080AEN pinout?
The USB2532I-1080AEN pinout is found in the manufacturer USB2532 datasheet at https://ww1.microchip.com/downloads/en/DeviceDoc/00001701B.pdf. The device uses a 36-pin SQFN package. Assign every ball using the datasheet pin-description table and follow its package dimensions, exposed-pad connection, and reference-layout requirements rather than relying on a generic SQFN footprint.
What is the USB speed supported by USB2532I-1080AEN?
USB2532I-1080AEN supports USB 2.0 Hi-Speed operation at a maximum signaling rate of 480 Mb/s. According to Microchip, it can attach upstream as a Full-Speed hub or as a Full-Speed and Hi-Speed hub. Actual link performance also depends on host support, cable quality, signal routing, impedance control, and the capabilities of each connected peripheral.
What USB2532I-1080AEN drop-in replacement has the same package?
USB2512BI-AEZG is the closest documented candidate for a same-package comparison because it uses a 36-pin SQFN and provides two USB 2.0 downstream ports. However, the available comparison identifies feature differences, so it should not be treated as a confirmed drop-in replacement until every pin, electrical limit, and configuration method is checked. Request a formal pin-compatibility assessment before changing a released PCB.
Is USB2532I-1080AEN suitable for industrial USB expansion?
USB2532I-1080AEN is suitable for industrial USB expansion when its complete electrical and environmental limits match the application. The device provides two downstream ports, OEM-configurable power behavior, port mapping, port swapping, and PHY boost functions. Confirm the industrial temperature range, USB electrical compliance, transient protection, and operating-temperature limits in the manufacturer documentation before production release.
Can USB2532I-1080AEN be used in a self-powered USB hub?
Yes, USB2532I-1080AEN can be used in a self-powered hub design because the Microchip USB2532 supports built-in self-powered and bus-powered internal default settings. The appropriate configuration depends on how the downstream ports are powered, how much current the board must source, and whether the system must support devices that draw more than the available bus current.
How does USB2532I-1080AEN compare with USB2512BI-AEZG?
USB2532I-1080AEN is a two-port USB 2.0 hub with port mapping, port swapping, PHY boost, and MTT operation, while USB2512BI-AEZG is identified as a two-port USB 2.0 hub without those listed features. Both are compared as 36-pin SQFN devices, but a footprint match alone does not confirm pin compatibility. Check the USB2532I-1080AEN datasheet against the USB2512BI documentation before substitution.
When should I choose USB2532I-1080AEN instead of a four-port USB hub?
Choose USB2532I-1080AEN when the design requires exactly two downstream USB 2.0 ports and benefits from configurable mapping, swapping, PHY boost, and selectable internal power behavior. A four-port controller such as USB2534-1080AEN changes the port count by two, which is a 100% increase and can alter board area, power-distribution requirements, USB routing, and enclosure design; it is therefore not a direct replacement.
What should I check before replacing USB2532I-1080AEN with USB2512B-AEZG?
Check the complete pin list, operating-voltage range, USB PHY requirements, clock topology, configuration interface, downstream-port power controls, package dimensions, exposed-pad treatment, and environmental ratings before replacing USB2532I-1080AEN with USB2512B-AEZG. The named part appears in comparison material, but a second compatible controller is not automatically a drop-in replacement. Use the manufacturer documentation for both devices.
How do I design the PCB around the USB2532I-1080AEN?
Use the USB2532 manufacturer reference layout for the 36-pin SQFN rather than adapting a generic 36-ball footprint. Place required decoupling capacitors at their specified pins, connect the exposed pad as directed, route upstream and downstream USB differential pairs with controlled impedance, and minimize stubs and switching-node proximity. The USB2512BI comparison identifies a 6 x 6 mm SQFN class package, but its layout should not replace the target-specific reference design.
What is the USB2532I-1080AEN operating voltage?
The USB2532I-1080AEN operating-voltage limit must be taken from the manufacturer USB2532 datasheet. The verified product description identifies the controller as a USB 2.0 Hi-Speed two-port hub in a 36-pin SQFN package, but it does not state the numerical core, I/O, or crystal-supply ranges. Confirm those values against the latest datasheet before setting the system power architecture.
How much power does USB2532I-1080AEN consume?
USB2532I-1080AEN is designed as a low-power OEM-configurable USB hub controller, but its numerical core and total supply-current limits must be read from the manufacturer datasheet. Actual board consumption also depends on the selected hub configuration, port-power behavior, PHY operating mode, crystal or clock arrangement, and the external load attached to enabled downstream ports. Use those operating modes when sizing the supply.
Where can I request a quote and current lead time for USB2532I-1080AEN?
Use the Request a Quote form on this page to request USB2532I-1080AEN pricing, current stock, minimum order quantity, and manufacturing lead time. The component is listed as a 36-pin SQFN USB 2.0 Hi-Speed two-port hub controller by Microchip Technology. For production planning, request a date for the exact ordering code and intended package or shipment configuration.
What are the key specifications of USB2532I-1080AEN?
USB2532I-1080AEN is a 36-pin SQFN USB interface controller with two downstream ports, USB 2.0 Hi-Speed capability up to 480 Mb/s, and MTT transaction technology. Its notable configuration functions include port mapping, port swapping, PHY boost, and selectable self-powered or bus-powered internal behavior. The package is 6 x 6 mm, and the device supports Full-Speed and Hi-Speed hub operating arrangements.

Dados de referência de engenharia para USB2532I-1080AEN — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose USB2532I-1080AEN for an embedded product that needs exactly two USB 2.0 downstream ports and values OEM configurability, port mapping, port swapping, PHY boost, and MTT operation. It is a sensible starting point when the system must support both Full-Speed and Hi-Speed upstream arrangements and when internal port power can be configured for different peripherals. USB2532-1080AEN is the closest family candidate, but the I-grade temperature designation must be checked before treating it as interchangeable. Consider USB2512BI-AEZG or USB2512B-AEZG only when their missing configuration features are acceptable and a complete pin-level review confirms compatibility. USB2514B-AEZC and USB2534-1080AEN provide four downstream ports, so they change the port count by two and may require different routing, power, board-space, and enclosure decisions. For every candidate, verify the manufacturer pin list, electrical limits, clock requirements, configuration method, and package drawing.

Comparação com alternativas

Parâmetro Este produto USB2532-1080AEN USB2512BI-AEZG USB2512B-AEZG USB2514B-AEZC USB2534-1080AEN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Downstream Ports 2 ports 2 ports 2 ports 2 ports 4 ports 4 ports

Principais diferenciais

  • Two-port configuration with broad OEM hub controls (vs USB2512BI-AEZG)
  • Direct family configuration match (vs USB2532-1080AEN)
  • Lower downstream-port count for two-port designs (vs USB2534-1080AEN)

Notas de projeto

Build the board from the USB2532 manufacturer reference layout for the 36-pin SQFN, 6 x 6 mm package. Place all required input and output capacitors directly beside their assigned pins, follow the exposed-pad connection and paste pattern, and avoid placing test pads or unrelated routing across high-speed differential pairs. A generic 36-ball library symbol may omit exposed-pad, thermal, or assembly requirements and can create an electrically correct but assembly-incompatible footprint.

Route upstream and downstream USB differential pairs as controlled-impedance traces with continuous reference planes, matched pair spacing, and minimal stubs. Keep the clock and USB PHY traces away from switching power inductors and high-current downstream-port traces. Use the shortest practical connection from the controller to its required external components. Validate the final stack-up, connector geometry, cable assumptions, and eye mask with a signal-integrity simulation before volume production.

Select the self-powered or bus-powered internal configuration only after calculating the worst-case downstream load, hub controller demand, inrush, cable losses, and available upstream current. Check the enable state of both ports during startup and bus-powered operation. Provide protection and power distribution that prevent one downstream fault from exceeding the system supply budget or violating the per-port current limit stated in the manufacturer documentation.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

USB 2.0 Specification and USB 2.0 Link Power Management Addendum compliance are stated in the manufacturer material. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses require confirmation from current manufacturer declarations.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

usb2532i 1080aen USB2532I-1080AEN datasheet USB2532I-1080AEN datasheet pdf USB2532I-1080AEN pinout USB2532I-1080AEN equivalent USB2532I-1080AEN replacement USB2532I-1080AEN cross reference USB2532I-1080AEN price USB2532I-1080AEN stock USB2532I-1080AEN vs USB2512BI-AEZG USB2532I-1080AEN footprint Microchip USB2532I-1080AEN

Componentes & termos relacionados

Microchip Technology USB2532I-1080AEN USB2532-1080AEN USB2512BI-AEZG USB2512B-AEZG USB2514B-AEZC USB2534-1080AEN USB hub controller USB interface controller USB 2.0 USB Hi-Speed MTT Multi-Transaction Translator 36-SQFN QFN family surface mount semiconductor 480 Mb/s Full-Speed Hi-Speed Link Power Management port mapping port swapping PHY boost embedded USB
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ