USB2532I-1080AEN 2-Port USB 2.0 Hub | Microchip
MPN: USB2532I-1080AEN ✓ فعالUSB2532I-1080AEN جائزہ
A USB hub controller is an interface integrated circuit that manages transactions between an upstream USB host and one or more downstream peripherals. The USB2532 family belongs to the USB interface controller hierarchy, where USB 2.0 specifies the protocol behavior, Hi-Speed describes the 480 Mb/s operating mode, and MTT describes the hub transaction architecture. This combination allows one USB connection to expand into multiple downstream ports while retaining individual port management.
The controller provides two downstream ports and OEM-configurable behavior. According to the Microchip USB2532 product page, built-in default settings support either self-powered or bus-powered internal operation, giving designers flexibility in how power is distributed to attached devices. It also supports port mapping, port swapping, and PHY boost functions as configurable hub features. These functions can simplify product development and improve compatibility with different PCB layouts and downstream peripheral arrangements.
The USB2532 is compliant with the USB 2.0 Specification and the USB 2.0 Link Power Management Addendum. It can operate as a Full-Speed hub or as a Full-Speed and Hi-Speed hub. The industrial USB2532I-1080AEN ordering code is identified with a 36-SQFN, 6 x 6 mm package. Exact electrical limits, internal flash configuration, clock requirements, and absolute maximum ratings must be selected from the manufacturer datasheet before schematic release.
Typical applications include embedded USB expansion in industrial equipment, printers, test systems, storage peripherals, set-top equipment, and compact consumer products. The device is most appropriate where two downstream USB ports are required on the same board. Designers should reserve the exposed-pad and package-layout requirements shown in the manufacturer documentation, and should implement the recommended crystal, decoupling, and USB impedance network exactly as specified.
This product page consolidates the verified USB2532 family description, manufacturer documentation links, package identity, functional use cases, and qualified comparison context. It also identifies where detailed values must be checked in the USB2532 datasheet, including pin assignments, timing limits, configuration requirements, and environmental ratings, so engineers can move from part selection to an auditable hardware design.
For a drop-in sourcing decision, confirm the exact temperature grade, hub configuration, package dimensions, exposed-pad pattern, firmware or ROM settings, and downstream-port requirements. A similarly named hub controller should not be treated as interchangeable unless its complete pin list, electrical characteristics, configuration method, and reference layout match the USB2532I-1080AEN datasheet.
کے لیے ڈراپ اِن متبادل USB2532I-1080AEN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں USB2532I-1080AEN (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Product Type, RoHS Status, USB Standard, Configuration Interface.
USB2532-1080AEN
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →USB2512BI-AEZG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →USB2512B-AEZG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →USB2514B-AEZC
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →USB2534-1080AEN
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →USB2532I-1080AEN تفصیلات
| Product Type | USB 2.0 Hi-Speed 2-port hub controller |
| USB Specification | USB 2.0 |
| Maximum USB Speed | 480 Mb/s Hi-Speed |
| Downstream Port Count | 2 ports |
| Upstream Port Count | 1 port |
| Transaction Architecture | MTT (Multi-Transaction Translator) |
| Operating Mode | Full-Speed hub or Full-Speed and Hi-Speed hub |
| Internal Power Configuration | Self-powered or bus-powered internal default settings |
| Link Power Management | USB 2.0 Link Power Management Addendum compliant |
| Port Mapping | Supported |
| Port Swapping | Supported |
| PHY Boost | Supported |
| پیکیج | 36-pin SQFN, 6 x 6 mm |
| ماؤنٹنگ ٹائپ | Surface mount |
| Maximum USB Bus-Speed Signal Rate | 480 Mb/s |
USB2532I-1080AEN 36-pin sqfn, 6 x 6 mm پن کنفیگریشن گائیڈ
USB2532I-1080AEN (36-pin sqfn, 6 x 6 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں USB2532I-1080AEN.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
USB2532I-1080AEN کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial USB Expansion, Embedded Test and Measurement, USB Storage and Peripheral Hub, Embedded Computing, Network Equipment, Security and Surveillance.
Industrial USB Expansion
USB2532I-1080AEN fits industrial equipment that needs to expose two USB 2.0 downstream ports through one upstream host connection. Its MTT architecture supports Full-Speed and Full-/Hi-Speed hub arrangements, while configurable mapping, swapping, and PHY boost can simplify board integration. Use the industrial temperature grade only after confirming its numerical limits. Place USB differential routes with controlled impedance, provide the required decouplers, and follow the manufacturer exposed-pad layout. The controller's configurable internal power behavior helps accommodate different downstream-device power budgets without redesigning the entire hub board.
تجویز کردہ
Embedded Test and Measurement
USB2532I-1080AEN can provide a compact two-port USB hub function in automated test equipment, diagnostic systems, and laboratory peripherals. One upstream USB interface supports two downstream device connections, reducing host-port requirements while retaining USB 2.0 Hi-Speed operation up to 480 Mb/s. The hub can attach as a Full-Speed or Full-/Hi-Speed device, allowing compatibility with different test-host configurations. OEM-configurable port mapping and swapping help align logical enumeration with physical connectors, while PHY boost can assist signal conditioning. Validate cable length, impedance, grounding, and downstream power requirements in the final test fixture.
تجویز کردہ
USB Storage and Peripheral Hub
USB2532I-1080AEN is suitable for storage appliances, printers, scanners, and compact peripherals that need two USB ports from one host connection. Its two downstream ports support USB 2.0 devices, and the device can operate as a Full-Speed hub when high-speed operation is unnecessary. Configurable internal power behavior is useful when devices require different power strategies, while port mapping and swapping can improve connector usability. The main engineering constraint is the total downstream current: each port must stay within its configured current limit, and the upstream supply must support the enabled loads. Add protection appropriate to the product enclosure and environment.
تجویز کردہ
Embedded Computing
USB2532I-1080AEN adds two downstream USB connections to an embedded computing platform without requiring a full host controller. The single upstream link can operate at Full-Speed or Hi-Speed, making the hub useful for keyboards, service interfaces, data acquisition accessories, and local configuration ports. Its low-power configurable design is especially useful where power budget varies with attached peripherals. Firmware should enumerate the hub after stable power is applied, and the board must implement the manufacturer's clock and decoupling requirements. Confirm boot-time USB behavior and hot-plug expectations because a bus-powered startup configuration can behave differently from a self-powered configuration.
تجویز کردہ
Network Equipment
USB2532I-1080AEN can support service and maintenance connections in routers, switches, gateways, and other network appliances that need more than one USB interface. Two downstream ports can simplify field-service workflows by allowing a keyboard and flash drive or a maintenance adapter to coexist. The controller supports USB 2.0 Hi-Speed up to 480 Mb/s and configurable port mapping or swapping for easier product integration. In a network enclosure, maintain clean separation between data and power paths, provide robust downstream overcurrent protection, and verify the operating-temperature range for the installation environment. The hub must not become the sole path for critical network management functions.
تجویز کردہ
Security and Surveillance
USB2532I-1080AEN can provide a two-port USB expansion function for surveillance controllers, access-control terminals, and camera accessories. One upstream interface accommodates two service or peripheral devices while preserving USB 2.0 compatibility. Port mapping and swapping allow the PCB connector arrangement to be matched to the enclosure, and configurable self-powered or bus-powered internal operation supports different peripheral classes. Because security equipment may remain continuously powered, calculate worst-case hub and downstream loads rather than typical consumption. Follow the manufacturer layout for differential routing and decouplers, and verify surge, ESD, temperature, and regulatory requirements for the installation environment.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا USB2532I-1080AEN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | USB2532-1080AEN | USB2512BI-AEZG | USB2512B-AEZG | USB2514B-AEZC | USB2534-1080AEN |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Downstream Ports | 2 ports | 2 ports | 2 ports | 2 ports | 4 ports | 4 ports |
اہم امتیازی خصوصیات
- Two-port configuration with broad OEM hub controls (بمقابلہUSB2512BI-AEZG)
- Direct family configuration match (بمقابلہUSB2532-1080AEN)
- Lower downstream-port count for two-port designs (بمقابلہUSB2534-1080AEN)
ڈیزائن نوٹس
Build the board from the USB2532 manufacturer reference layout for the 36-pin SQFN, 6 x 6 mm package. Place all required input and output capacitors directly beside their assigned pins, follow the exposed-pad connection and paste pattern, and avoid placing test pads or unrelated routing across high-speed differential pairs. A generic 36-ball library symbol may omit exposed-pad, thermal, or assembly requirements and can create an electrically correct but assembly-incompatible footprint.
Route upstream and downstream USB differential pairs as controlled-impedance traces with continuous reference planes, matched pair spacing, and minimal stubs. Keep the clock and USB PHY traces away from switching power inductors and high-current downstream-port traces. Use the shortest practical connection from the controller to its required external components. Validate the final stack-up, connector geometry, cable assumptions, and eye mask with a signal-integrity simulation before volume production.
Select the self-powered or bus-powered internal configuration only after calculating the worst-case downstream load, hub controller demand, inrush, cable losses, and available upstream current. Check the enable state of both ports during startup and bus-powered operation. Provide protection and power distribution that prevent one downstream fault from exceeding the system supply budget or violating the per-port current limit stated in the manufacturer documentation.
تعمیل کی معلومات
USB 2.0 Specification and USB 2.0 Link Power Management Addendum compliance are stated in the manufacturer material. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses require confirmation from current manufacturer declarations.