VSC8552XKS-01 - Dual-Port Gigabit Ethernet PHY | Microchip
N.º da peça: VSC8552XKS-01 ✓ AtivoVSC8552XKS-01 Visão geral
A Gigabit Ethernet PHY is the physical-layer component that converts digital MAC-layer data into electrical or optical signaling and recovers data from the medium. In the broader hierarchy, the VSC8552 belongs to Ethernet interface integrated circuits, network interface controllers, and communication semiconductors. Its dual-media architecture allows one PHY to support both copper and optical network paths when paired with suitable magnetics, optics, clocking, and system circuitry.
Key features include support for 1000BASE-T copper and fiber media, IEEE 802.3az Energy Efficient Ethernet, dual recovered-clock outputs, programmable clock-squelch control, and ring-resiliency operation. The recovered clocks support Synchronous Ethernet applications, while clock squelch helps prevent unwanted clock propagation and timing loops. These features suit carrier equipment, enterprise networking, data-center links, industrial systems, and consumer gateways.
The VSC8552 family provides a high level of integration for two-port designs. Supporting both copper and fiber media can simplify common control-plane and digital backplane logic across mixed network interfaces. The manufacturer also documents transitions among the VSC8504, VSC8552, VSC8572, and VSC8574 families, but replacement feasibility must be confirmed against the device pin list, media configuration, clocks, power design, and software configuration.
Typical deployments include dual-port copper switches, fiber-to-copper network gateways, telecom access equipment, industrial Ethernet controllers, and Synchronous Ethernet equipment. The 256-pin PBGA requires careful high-density PCB layout, controlled-reference-voltage and clock routing, and a multilayer power-delivery network. Because this package exposes many power, ground, signal, and configuration pins, designers should use the manufacturer's pin-description table and recommended reference design rather than infer connectivity from the 17 mm square outline.
For a new design, the main engineering trade-off is integration against board complexity. Two integrated ports and recovered-clock outputs reduce external active component count, while the large BGA footprint demands fine-pitch assembly, adequate via-in-pad or via-beneath-pad structures, and careful return-path design. Existing VSC8552 hardware should not be assumed to accept another family member without a board and firmware review; Microchip specifically notes that the VSC8562 is not pin-for-pin compatible with the VSC8552.
This product page organizes the confirmed Ethernet, media, package, clocking, and power characteristics into an engineering-oriented selection reference. It also identifies the compatible family suffix documented for the same 256-pin PBGA footprint and highlights the board-level checks that engineers must complete before approving a substitution, firmware reuse, or second-source transition.
Alternativas drop-in para VSC8552XKS-01 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
VSC8552XKS-05
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
VSC8552XKS-01 Especificações
| Device Type | Dual-port Gigabit Ethernet physical-layer transceiver |
| Number of Ports | 2 ports |
| Ethernet Data Rate | 1 Gbit/s per port |
| Supported Media | Copper and fiber |
| Copper Standard | IEEE 802.3az Energy Efficient Ethernet |
| Digital Interface | Configurable receive and transmit GMII |
| Recovered Clock Outputs | 2 outputs |
| Clock Squelch | Programmable |
| Synchronous Ethernet | Supported |
| Ring Resiliency | Supported for 1000BASE-T timing transfer |
| Core Supply Voltage | 1 V |
| Encapsulamento | 256-pin PBGA, 17 mm x 17 mm |
| Tipo de montagem | Surface mount |
| Interconnect | Lead-free second-level interconnect |
| Temperature Range | Extended temperature range |
Guia de Configuração de Pinos do VSC8552XKS-01 256-pin pbga, 17 mm x 17 mm
Configuração de pinos para VSC8552XKS-01 (pacote 256-pin pbga, 17 mm x 17 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para VSC8552XKS-01.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
VSC8552XKS-01 é adequado para 6 aplicaçãos: Dual-Port Gigabit Ethernet Switch, Fiber-to-Copper Network Gateway, Synchronous Ethernet Access Equipment, Industrial Ethernet Control System, Enterprise Network Edge, Data-Center Link Adapter.
Dual-Port Gigabit Ethernet Switch
The VSC8552XKS-01 fits a dual-port Gigabit switching or routing subsystem that requires copper and fiber media options in one physical-layer device. Its two 1 Gbit/s ports, configurable receive and transmit GMII interfaces, and IEEE 802.3az Energy Efficient Ethernet support help consolidate repeated PHY functions on a high-layer board. The device connects through a 256-pin PBGA, so the PCB must provide fine-pitch escape routing and a dense, low-impedance power network. A design should use the manufacturer's reference footprint and decoupling layout to preserve signal integrity on both GMII data groups.
Recomendado
Fiber-to-Copper Network Gateway
The VSC8552XKS-01 is appropriate for a gateway that must accept traffic from copper and fiber links while presenting a common digital interface to the host processor or switch fabric. Supporting both media within a dual-port PHY reduces the need for separate physical-layer devices when the board architecture can accommodate the 256-pin package. Configurable GMII signals support integration with an Ethernet MAC, while the 1 V core supply demands a tightly implemented multi-rail power design. Media magnetics, optical interfaces, isolation, and return-path planning remain separate system-level requirements.
Recomendado
Synchronous Ethernet Access Equipment
The VSC8552XKS-01 fits telecommunications access equipment that requires recovered timing for Synchronous Ethernet. Its two recovered-clock outputs can supply timing-derived signals to system logic, and programmable clock squelch can inhibit unwanted clocks from propagating into the network. Ring resiliency allows a 1000BASE-T connection to transfer timing between master and slave roles without interrupting the link. These features must be paired with low-jitter reference-clock design, compliant line-card timing architecture, and the detailed power and signal-integrity layout in the manufacturer datasheet.
Recomendado
Industrial Ethernet Control System
The VSC8552XKS-01 can serve as the dual-port Ethernet interface in industrial controllers, condition-monitoring gateways, and networked automation equipment. Two Gigabit ports allow copper machine links and fiber uplinks to coexist in a compact control platform, while IEEE 802.3az EEE can reduce link energy during idle periods. The extended-temperature-range ordering option is relevant to industrial environments, but designers must verify the exact grade and environmental qualification. The fine-pitch PBGA requires a controlled assembly process and careful separation between sensitive Ethernet and digital clock routes.
Recomendado
Enterprise Network Edge
The VSC8552XKS-01 is suitable for enterprise edge equipment where two Gigabit links provide copper access and fiber uplink connectivity. Its configurable GMII interface allows a common digital path to the switching or packet-processing fabric, while Energy Efficient Ethernet addresses power consumption in access networks. The 256-pin PBGA favors established high-density assembly infrastructure and permits extensive analog, digital, clock, and power connectivity. Layout should follow the manufacturer's recommended multilayer stack-up, provide continuous return paths beneath GMII signals, and preserve separation from switching clocks and high-current power stages.
Recomendado
Data-Center Link Adapter
The VSC8552XKS-01 can support a dual-port data-center link adapter that combines copper server connectivity with a fiber backbone. Each port operates at 1 Gbit/s, and the configurable GMII interface gives the host controller a defined path for digital data and status signaling. Recovered-clock outputs and clock squelch are valuable when the design contains multiple timing domains or must prevent idle clocks from creating timing loops. The 256-pin package is appropriate for a controlled multilayer PCB, but package-to-package transition and prototype assembly should be planned before committing the design to volume production.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para VSC8552XKS-01 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | VSC8552XKS-05 |
|---|---|---|
| Package | 256-PBGA (17x17) | 256-PBGA (17x17) |
| Brand | Microchip Technology | Microchip Technology |
| Device Type | Dual-port Gigabit Ethernet PHY | Dual-port Gigabit Ethernet PHY |
| Port Count | 2 ports | 2 ports |
| Ethernet Data Rate | 1 Gbit/s per port | 1 Gbit/s per port |
| Supported Media | Copper and fiber | Copper and fiber |
| Digital Interface | Configurable receive and transmit GMII | Configurable receive and transmit GMII |
| Energy Efficient Ethernet | IEEE 802.3az | IEEE 802.3az |
| Core Supply Voltage | 1 V | 1 V |
| Recovered Clock Outputs | 2 outputs | 2 outputs |
| Synchronous Ethernet | Supported | Supported |
| Clock Squelch | Programmable | Programmable |
Principais diferenciais
- Two media types are integrated into one dual-port PHY (vs VSC8552XKS-05)
- Synchronous Ethernet clocking is integrated (vs VSC8552XKS-05)
- Energy Efficient Ethernet support targets link power reduction (vs VSC8552XKS-05)
Notas de projeto
Implement the 256-pin PBGA using the exact Microchip footprint and recommended multilayer stack-up for VSC8552XKS-01. Reserve the manufacturer-specified via pattern for the BGA pads and provide uninterrupted reference planes beneath the device. Because the package combines high-speed digital GMII routing with sensitive copper and fiber PHY circuits, route clocks and data over continuous return paths and verify the completed stack-up against the datasheet's signal-integrity guidance.
Separate the 1 V core rail from analog and digital supplies exactly as directed by the manufacturer datasheet. Place the required bulk and local decoupling capacitors at their designated power balls, preserve a low-impedance return path, and avoid routing noisy switching or termination currents beneath the PHY. Validate the power network across load transients and temperature corners before production because small resistance and inductance variations can affect recovered-clock quality and GMII signal integrity.
Treat GMII data, recovered clocks, and reference clocks as a coordinated timing system. Match trace lengths where the interface specification requires it, keep clock traces away from media-driver energy, and avoid stubs or unnecessary test pads. Program clock squelch to prevent idle clocks from propagating into unintended paths, then validate eye timing, skew, jitter, and recovery behavior with the exact external magnetics and reference clock used in the production design.
Do not treat a shared package family as sufficient evidence for a drop-in replacement. For VSC8552XKS-05, confirm the ordering-code grade, temperature range, silicon revision, clock behavior, exposed-ball assignments, and device-driver support against the manufacturer documentation. Microchip separately states that the VSC8562 is not pin-for-pin compatible with the VSC8552, illustrating why a PCB and firmware review is mandatory before substitution.
Estimate total dissipation from the actual core, analog, and I/O power conditions at the highest operating temperature and maximum link activity. Account for the thermal resistance of the 256-pin BGA assembly rather than relying on the die alone. Keep the device away from heat sources on the line card, distribute copper where the package permits, and qualify the assembled board under the enclosure's maximum ambient temperature and airflow conditions.
Informações de conformidade
The component listing identifies a lead-free second-level interconnect and an extended temperature range. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statuses were not confirmed.