Microchip Technology

VSC8552XKS-01 - Dual-Port Gigabit Ethernet PHY | Microchip

MPN: VSC8552XKS-01 ✓ فعال
1 V Vdss 256-pin PBGA, 17 mm x 17 mm Package 2 outputs Speed
MOQ: 1 |

VSC8552XKS-01 جائزہ

The Microchip Technology VSC8552XKS-01 is a dual-port Gigabit Ethernet physical-layer transceiver supporting copper and fiber media in a 256-pin PBGA package measuring 17 mm by 17 mm. It combines two Gigabit Ethernet ports, configurable receive and transmit GMII interfaces, IEEE 802.3az Energy Efficient Ethernet, and recovered-clock functions for synchronous Ethernet designs. The device operates from a 1 V core supply according to its product listing.

A Gigabit Ethernet PHY is the physical-layer component that converts digital MAC-layer data into electrical or optical signaling and recovers data from the medium. In the broader hierarchy, the VSC8552 belongs to Ethernet interface integrated circuits, network interface controllers, and communication semiconductors. Its dual-media architecture allows one PHY to support both copper and optical network paths when paired with suitable magnetics, optics, clocking, and system circuitry.

Key features include support for 1000BASE-T copper and fiber media, IEEE 802.3az Energy Efficient Ethernet, dual recovered-clock outputs, programmable clock-squelch control, and ring-resiliency operation. The recovered clocks support Synchronous Ethernet applications, while clock squelch helps prevent unwanted clock propagation and timing loops. These features suit carrier equipment, enterprise networking, data-center links, industrial systems, and consumer gateways.

The VSC8552 family provides a high level of integration for two-port designs. Supporting both copper and fiber media can simplify common control-plane and digital backplane logic across mixed network interfaces. The manufacturer also documents transitions among the VSC8504, VSC8552, VSC8572, and VSC8574 families, but replacement feasibility must be confirmed against the device pin list, media configuration, clocks, power design, and software configuration.

Typical deployments include dual-port copper switches, fiber-to-copper network gateways, telecom access equipment, industrial Ethernet controllers, and Synchronous Ethernet equipment. The 256-pin PBGA requires careful high-density PCB layout, controlled-reference-voltage and clock routing, and a multilayer power-delivery network. Because this package exposes many power, ground, signal, and configuration pins, designers should use the manufacturer's pin-description table and recommended reference design rather than infer connectivity from the 17 mm square outline.

For a new design, the main engineering trade-off is integration against board complexity. Two integrated ports and recovered-clock outputs reduce external active component count, while the large BGA footprint demands fine-pitch assembly, adequate via-in-pad or via-beneath-pad structures, and careful return-path design. Existing VSC8552 hardware should not be assumed to accept another family member without a board and firmware review; Microchip specifically notes that the VSC8562 is not pin-for-pin compatible with the VSC8552.

This product page organizes the confirmed Ethernet, media, package, clocking, and power characteristics into an engineering-oriented selection reference. It also identifies the compatible family suffix documented for the same 256-pin PBGA footprint and highlights the board-level checks that engineers must complete before approving a substitution, firmware reuse, or second-source transition.

کے لیے ڈراپ اِن متبادل VSC8552XKS-01 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

VSC8552XKS-05

✅ ڈراپ-اِن
📦 256-PBGA (17x17)
Same VSC8552 family and 256-PBGA (17x17) package; ordering-code temperature or grade difference is not numerically specified, while electrical ratings remain subject to confirmation.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

VSC8552XKS-01 تفصیلات

Device Type Dual-port Gigabit Ethernet physical-layer transceiver
Number of Ports 2 ports
Ethernet Data Rate 1 Gbit/s per port
Supported Media Copper and fiber
Copper Standard IEEE 802.3az Energy Efficient Ethernet
Digital Interface Configurable receive and transmit GMII
Recovered Clock Outputs 2 outputs
Clock Squelch Programmable
Synchronous Ethernet Supported
Ring Resiliency Supported for 1000BASE-T timing transfer
Core Supply Voltage 1 V
پیکیج 256-pin PBGA, 17 mm x 17 mm
ماؤنٹنگ ٹائپ Surface mount
Interconnect Lead-free second-level interconnect
Temperature Range Extended temperature range

VSC8552XKS-01 256-pin pbga, 17 mm x 17 mm پن کنفیگریشن گائیڈ

VSC8552XKS-01 (256-pin pbga, 17 mm x 17 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

VSC8552XKS-01 کے لیے 256-pin pbga, 17 mm x 17 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں VSC8552XKS-01.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

VSC8552XKS-01 کے لیے موزوں ہے 6 ایپلیکیشنs: Dual-Port Gigabit Ethernet Switch, Fiber-to-Copper Network Gateway, Synchronous Ethernet Access Equipment, Industrial Ethernet Control System, Enterprise Network Edge, Data-Center Link Adapter.

🌐

Dual-Port Gigabit Ethernet Switch

The VSC8552XKS-01 fits a dual-port Gigabit switching or routing subsystem that requires copper and fiber media options in one physical-layer device. Its two 1 Gbit/s ports, configurable receive and transmit GMII interfaces, and IEEE 802.3az Energy Efficient Ethernet support help consolidate repeated PHY functions on a high-layer board. The device connects through a 256-pin PBGA, so the PCB must provide fine-pitch escape routing and a dense, low-impedance power network. A design should use the manufacturer's reference footprint and decoupling layout to preserve signal integrity on both GMII data groups.

🌐

Fiber-to-Copper Network Gateway

The VSC8552XKS-01 is appropriate for a gateway that must accept traffic from copper and fiber links while presenting a common digital interface to the host processor or switch fabric. Supporting both media within a dual-port PHY reduces the need for separate physical-layer devices when the board architecture can accommodate the 256-pin package. Configurable GMII signals support integration with an Ethernet MAC, while the 1 V core supply demands a tightly implemented multi-rail power design. Media magnetics, optical interfaces, isolation, and return-path planning remain separate system-level requirements.

⚡

Synchronous Ethernet Access Equipment

The VSC8552XKS-01 fits telecommunications access equipment that requires recovered timing for Synchronous Ethernet. Its two recovered-clock outputs can supply timing-derived signals to system logic, and programmable clock squelch can inhibit unwanted clocks from propagating into the network. Ring resiliency allows a 1000BASE-T connection to transfer timing between master and slave roles without interrupting the link. These features must be paired with low-jitter reference-clock design, compliant line-card timing architecture, and the detailed power and signal-integrity layout in the manufacturer datasheet.

🏭

Industrial Ethernet Control System

The VSC8552XKS-01 can serve as the dual-port Ethernet interface in industrial controllers, condition-monitoring gateways, and networked automation equipment. Two Gigabit ports allow copper machine links and fiber uplinks to coexist in a compact control platform, while IEEE 802.3az EEE can reduce link energy during idle periods. The extended-temperature-range ordering option is relevant to industrial environments, but designers must verify the exact grade and environmental qualification. The fine-pitch PBGA requires a controlled assembly process and careful separation between sensitive Ethernet and digital clock routes.

🖥️

Enterprise Network Edge

The VSC8552XKS-01 is suitable for enterprise edge equipment where two Gigabit links provide copper access and fiber uplink connectivity. Its configurable GMII interface allows a common digital path to the switching or packet-processing fabric, while Energy Efficient Ethernet addresses power consumption in access networks. The 256-pin PBGA favors established high-density assembly infrastructure and permits extensive analog, digital, clock, and power connectivity. Layout should follow the manufacturer's recommended multilayer stack-up, provide continuous return paths beneath GMII signals, and preserve separation from switching clocks and high-current power stages.

🖥️

Data-Center Link Adapter

The VSC8552XKS-01 can support a dual-port data-center link adapter that combines copper server connectivity with a fiber backbone. Each port operates at 1 Gbit/s, and the configurable GMII interface gives the host controller a defined path for digital data and status signaling. Recovered-clock outputs and clock squelch are valuable when the design contains multiple timing domains or must prevent idle clocks from creating timing loops. The 256-pin package is appropriate for a controlled multilayer PCB, but package-to-package transition and prototype assembly should be planned before committing the design to volume production.

What is the VSC8552XKS-01?
The VSC8552XKS-01 is a Microchip Technology dual-port Gigabit Ethernet PHY supporting copper and fiber media. It provides receive and transmit GMII interfaces, IEEE 802.3az Energy Efficient Ethernet, two recovered-clock outputs, and Synchronous Ethernet support in a 256-pin PBGA measuring 17 mm by 17 mm. According to the manufacturer datasheet 60001809A, it is intended for dual-port enterprise, telecom, data-center, and industrial network equipment.
How many Gigabit Ethernet ports does the VSC8552XKS-01 support?
The VSC8552XKS-01 supports two Gigabit Ethernet ports, each operating at 1 Gbit/s. The device is a physical-layer transceiver rather than a complete Ethernet switch, so the system still needs a MAC or switching fabric to manage traffic above the PHY layer. Its dual-media capability supports copper and fiber PHYs within one device, according to the manufacturer product page and datasheet 60001809A.
Which media and Ethernet standards are supported by the VSC8552XKS-01?
The VSC8552XKS-01 supports Gigabit Ethernet over copper or fiber and includes IEEE 802.3az Energy Efficient Ethernet technology. Copper support includes 1000BASE-T operation, while the digital interface uses configurable receive and transmit GMII signals. The EEE capability is intended to reduce link power when traffic is idle while retaining normal Gigabit Ethernet operation, as described by Microchip Technology.
What package and board layout does the VSC8552XKS-01 use?
The VSC8552XKS-01 uses a 256-pin PBGA package measuring 17 mm by 17 mm. Because it is a high-density, fine-pitch surface-mount package, the PCB should follow the manufacturer's recommended footprint, via pattern, power-plane arrangement, and assembly process. The pin-description table in datasheet 60001809A is the authority for assigning every power, ground, clock, configuration, and data signal.
Does the VSC8552XKS-01 support Synchronous Ethernet?
Yes, the VSC8552XKS-01 includes two recovered-clock outputs for Synchronous Ethernet applications. According to manufacturer datasheet 60001809A, programmable clock-squelch control can inhibit undesirable clocks from propagating and helps prevent timing loops. Ring-resiliency operation permits a 1000BASE-T port to transfer timing between master and slave roles without interrupting the 1000BASE-T link.
Where can I download the VSC8552XKS-01 datasheet PDF?
The official VSC8552XKS-01 datasheet is available from Microchip Technology as document 60001809A. Use the manufacturer PDF for the complete electrical characteristics, pin descriptions, register map, media configuration, clocking requirements, and recommended application information. Product-listing pages can provide ordering information, but the manufacturer datasheet and transition design guide should control PCB and firmware design decisions.
Where can I find the VSC8552XKS-01 pinout?
The VSC8552XKS-01 pinout is found in the pin-description section of Microchip datasheet 60001809A and the package drawing designated for the 256-pin, 17 mm square PBGA. Use that table when assigning power, ground, analog copper and fiber interfaces, GMII signals, recovered clocks, reset, and configuration pins. Do not infer individual signal positions from the package dimensions alone.
Is the VSC8552XKS-01 suitable for Synchronous Ethernet equipment?
The VSC8552XKS-01 is suitable for Synchronous Ethernet equipment because it provides two recovered-clock outputs and programmable clock squelch. These features support timing distribution while limiting unwanted clock propagation and timing-loop risks. A complete design must also meet the device's reference-clock, jitter, power, decoupling, and digital-interface requirements from datasheet 60001809A.
What are the key specifications engineers should know about VSC8552XKS-01?
The principal VSC8552XKS-01 specifications are two Gigabit Ethernet ports, copper-and-fiber media support, configurable receive and transmit GMII, a 1 V core supply, IEEE 802.3az Energy Efficient Ethernet, two recovered-clock outputs, and a 256-pin 17 mm square PBGA. According to manufacturer datasheet 60001809A, programmable clock squelch and ring-resiliency features strengthen its suitability for synchronized telecom and enterprise networking equipment.
Can VSC8552XKS-05 replace VSC8552XKS-01?
The VSC8552XKS-05 is a same-family option listed in the 256-pin, 17 mm square PBGA format and is the closest documented drop-in candidate. Before substitution, verify the temperature grade, silicon revision, clocking configuration, firmware support, and exact exposed-power and ground-ball assignments against the manufacturer transition documentation. The available material confirms the shared package family but does not quantify every ordering-code difference.
What can replace the VSC8552XKS-01?
The documented drop-in candidate for the VSC8552XKS-01 is the VSC8552XKS-05, which uses the same 256-pin, 17 mm square PBGA format and remains within the VSC8552 product family. Other PHY families, including the VSC8562, are not automatically interchangeable: Microchip states that the VSC8562 is not pin-for-pin compatible with the VSC8552. Confirm electrical, thermal, firmware, and PCB requirements before approving any replacement.
Can the VSC8562 replace the VSC8552XKS-01 without a redesign?
No, the VSC8562 should not be treated as a direct drop-in replacement for the VSC8552XKS-01 because Microchip states that the two devices are not pin-for-pin compatible. The substitution article explains the functional and board limitations involved. A redesign or qualified adaptation is required after comparing power architecture, clocks, media interfaces, control signals, package connections, and device drivers.
When should I choose the VSC8552XKS-01 instead of another Ethernet PHY?
Choose the VSC8552XKS-01 when a design needs two integrated Gigabit Ethernet ports with copper and fiber media options, configurable GMII, IEEE 802.3az EEE, and recovered-clock outputs in one device. Its 256-pin PBGA makes it most attractive for experienced high-density designs with an established manufacturing flow. Prefer a simpler PHY when fewer ports, a smaller package, or easier assembly outweigh synchronization and dual-media integration.
Is the VSC8552XKS-01 suitable for telecom and industrial Ethernet equipment?
The VSC8552XKS-01 is suitable for telecom and industrial Ethernet equipment requiring two Gigabit ports, copper or fiber connectivity, and recovered-clock support. Its extended-temperature-range ordering option and Synchronous Ethernet features address demanding network timing requirements. Final suitability must be confirmed against the product's specified temperature range, reliability targets, isolation design, and the complete operating conditions of the finished equipment.
Where to buy VSC8552XKS-01 online?
Use the Request a Quote form on this page to request VSC8552XKS-01 availability, packaging, and order details from XAIPART. The form is the appropriate route for a custom quotation and for confirming current lead time without relying on an outdated catalog record. Provide the exact 256-pin PBGA ordering code and your requested quantity, temperature grade, and delivery schedule.
What is the price of the VSC8552XKS-01?
The current commercial terms for the VSC8552XKS-01 are shown through the Request a Quote form on this page. The form can confirm unit pricing, volume breaks, assembly packaging, and shipment timing for the exact MPN. Request a quotation before releasing the order because availability and lead time can change with quantity and production scheduling.
Is the VSC8552XKS-01 in stock and what is its lead time?
Current VSC8552XKS-01 stock and lead time must be confirmed through the Request a Quote form on this page. Submit the exact MPN, required quantity, target date, and packaging preference so the commercial team can check the current supply position. Avoid treating a general listing message or an archived distributor record as a guaranteed allocation for a production order.

کے لیے انجینئرنگ ریفرنس ڈیٹا VSC8552XKS-01 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the VSC8552XKS-01 for a high-performance design needing two Gigabit Ethernet ports, copper and fiber media support, configurable GMII, Energy Efficient Ethernet, and recovered clocks for Synchronous Ethernet. Its 256-pin PBGA provides extensive connectivity but requires mature fine-pitch assembly and multilayer PCB expertise. The VSC8552XKS-05 is the closest documented same-package family candidate when its ordering-code grade matches the application's temperature and qualification requirements. Do not select the VSC8562 as a direct replacement because Microchip states that it is not pin-for-pin compatible with the VSC8552. If a simpler package, fewer media types, or fewer integrated synchronization features are more important than dual-port integration, a smaller Ethernet PHY may simplify the design, but it would not be a drop-in substitution for this 256-pin device.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ VSC8552XKS-05
Package 256-PBGA (17x17) 256-PBGA (17x17)
Brand Microchip Technology Microchip Technology
Device Type Dual-port Gigabit Ethernet PHY Dual-port Gigabit Ethernet PHY
Port Count 2 ports 2 ports
Ethernet Data Rate 1 Gbit/s per port 1 Gbit/s per port
Supported Media Copper and fiber Copper and fiber
Digital Interface Configurable receive and transmit GMII Configurable receive and transmit GMII
Energy Efficient Ethernet IEEE 802.3az IEEE 802.3az
Core Supply Voltage 1 V 1 V
Recovered Clock Outputs 2 outputs 2 outputs
Synchronous Ethernet Supported Supported
Clock Squelch Programmable Programmable

اہم امتیازی خصوصیات

  • Two media types are integrated into one dual-port PHY (بمقابلہVSC8552XKS-05)
  • Synchronous Ethernet clocking is integrated (بمقابلہVSC8552XKS-05)
  • Energy Efficient Ethernet support targets link power reduction (بمقابلہVSC8552XKS-05)

ڈیزائن نوٹس

Implement the 256-pin PBGA using the exact Microchip footprint and recommended multilayer stack-up for VSC8552XKS-01. Reserve the manufacturer-specified via pattern for the BGA pads and provide uninterrupted reference planes beneath the device. Because the package combines high-speed digital GMII routing with sensitive copper and fiber PHY circuits, route clocks and data over continuous return paths and verify the completed stack-up against the datasheet's signal-integrity guidance.

Separate the 1 V core rail from analog and digital supplies exactly as directed by the manufacturer datasheet. Place the required bulk and local decoupling capacitors at their designated power balls, preserve a low-impedance return path, and avoid routing noisy switching or termination currents beneath the PHY. Validate the power network across load transients and temperature corners before production because small resistance and inductance variations can affect recovered-clock quality and GMII signal integrity.

Treat GMII data, recovered clocks, and reference clocks as a coordinated timing system. Match trace lengths where the interface specification requires it, keep clock traces away from media-driver energy, and avoid stubs or unnecessary test pads. Program clock squelch to prevent idle clocks from propagating into unintended paths, then validate eye timing, skew, jitter, and recovery behavior with the exact external magnetics and reference clock used in the production design.

Do not treat a shared package family as sufficient evidence for a drop-in replacement. For VSC8552XKS-05, confirm the ordering-code grade, temperature range, silicon revision, clock behavior, exposed-ball assignments, and device-driver support against the manufacturer documentation. Microchip separately states that the VSC8562 is not pin-for-pin compatible with the VSC8552, illustrating why a PCB and firmware review is mandatory before substitution.

Estimate total dissipation from the actual core, analog, and I/O power conditions at the highest operating temperature and maximum link activity. Account for the thermal resistance of the 256-pin BGA assembly rather than relying on the die alone. Keep the device away from heat sources on the line card, distribute copper where the package permits, and qualify the assembled board under the enclosure's maximum ambient temperature and airflow conditions.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Yes
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The component listing identifies a lead-free second-level interconnect and an extended temperature range. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statuses were not confirmed.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

VSC8552XKS-01 datasheet VSC8552XKS-01 datasheet pdf VSC8552XKS-01 pinout VSC8552XKS-01 specifications VSC8552XKS-01 equivalent VSC8552XKS-01 replacement VSC8552XKS-01 cross reference VSC8552XKS-01 vs VSC8552XKS-05 VSC8552XKS-01 footprint VSC8552XKS-01 application circuit Microchip VSC8552XKS-01 VSC8552XKS-01 price VSC8552XKS-01 stock

متعلقہ اجزاء اور اصطلاحات

Microchip Technology VSC8552XKS-01 VSC8552 VSC8552XKS-05 VSC8562 VSC8574XKS-02 VSC8564XKS-14 Gigabit Ethernet PHY Ethernet physical layer dual-port Gigabit Ethernet copper Ethernet fiber Ethernet IEEE 802.3az Energy Efficient Ethernet Synchronous Ethernet recovered clock clock squelch ring resiliency GMII 1 V core supply 256-pin PBGA BGA package surface mount telecommunications equipment industrial Ethernet
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں