Nuvoton Technology Corporation

W78E054C40PL 40MHz 8051 16KB Flash MCU | Nuvoton

N.º da peça: W78E054C40PL ✓ Ativo
44-pin PLCC Package 40 MHz Speed 16 KB (16K x 8) Flash EPROM Memory
MOQ: 1 |

W78E054C40PL Visão geral

The Nuvoton Technology Corporation W78E054C40PL is an 8-bit W78 series microcontroller with a 40 MHz maximum operating frequency, 16 KB of Flash EPROM, 256 bytes of RAM, and 36 I/O lines in a 44-pin PLCC package. Its instruction set is compatible with the standard 8051, allowing standard 8051 application code and development techniques to be reused in compact embedded control systems.

An 8051-compatible microcontroller is an embedded processor that combines a CPU core, program memory, data memory, I/O ports, timers, and serial communication in one integrated circuit. The W78E054C belongs to the broader hierarchy of 8-bit MCU, microprocessor, embedded controller, and semiconductor. Its combination of Flash memory, multiple I/O ports, timers, watchdog protection, and serial communication makes it suitable for compact control, monitoring, and data-acquisition equipment.

The device provides four 8-bit bidirectional, bit-addressable I/O ports and an additional 4-bit I/O port identified as P4. It also includes three 16-bit timer/counters, a hardware watchdog timer, and a serial port. These resources allow a designer to connect digital inputs and outputs, generate timing signals, measure events, and communicate with external equipment without requiring a separate collection of peripheral devices.

The W78E054C instruction set is fully compatible with the standard 8051, but the operating range and integrated Flash EPROM make this device more useful for modern embedded designs than the original MCS-51 architecture. Its 16 KB program-memory capacity is suitable for control firmware, while the 256-byte RAM supports working variables, stack operations, buffers, and communication state. The 40 MHz operating specification supports faster execution than standard-speed 8051 implementations while retaining software compatibility.

Typical uses include industrial equipment interfaces, appliance controllers, instrument panels, embedded timers, serial-connected control modules, and compact control boards. The 44-pin PLCC package provides more I/O and clock-related pins than compact leaded packages and is useful when a design needs several parallel digital lines. Designers should confirm the complete pin description, oscillator requirements, reset behavior, and electrical limits in the manufacturer datasheet before laying out a new board.

The most important design consideration is to follow the datasheet pin and connection guidance exactly, particularly for the oscillator, reset, supply, and I/O pins. Keep power and ground connections short, provide the specified decoupling arrangement, and route high-current outputs away from sensitive clock and reset traces. Firmware should also use the watchdog timer and the device’s timer resources to improve fault recovery and deterministic control behavior.

This product page consolidates the device’s published architecture, memory, speed, I/O, package, and interface characteristics with application guidance, comparison criteria, and practical design notes. It helps engineers identify whether the 8051-compatible instruction set, 40 MHz performance, Flash memory, and 36 I/O lines fit a specific embedded-control design without changing the MCU architecture.

Alternativas drop-in para W78E054C40PL — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com W78E054C40PL (mesmo formato e footprint) — diferindo em Package, Program Memory Size, RAM Size, Product Type.

Nuvoton Technology Corporation
Package: 40-DIP, through-hole
Program Memory Size: 16KB (16K x 8) Flash
RAM Size: 256 x 8 bits (256 bytes)
Comparar com W78E054C40PL →
Nuvoton Technology Corporation
Package: 44-pin QFP
Program Memory Size: 16 KB (16K x 8)
RAM Size: 256 x 8 bits
Comparar com W78E054C40PL →

W78E054C40CL

✅ Drop-In ⚠️ Especificações não verificadas
📦 44-pin PLCC (J-lead)
Same W78E054C40 family and 40 MHz class; exact suffix-specific electrical and commercial differences require datasheet confirmation.

📋 Alternativa de referência (fora do catálogo)

W78E054C40DL

✅ Drop-In ⚠️ Especificações não verificadas
Nuvoton Technology Corporation
📦 44-pin PLCC (J-lead)
8-bit 8051 microcontroller · 16KB (16K x 8) Flash · 256 x 8 bits (256 bytes) · 32 pins · 40MHz · 40-DIP, through-hole · 40 pins

Consulte o preço

Ver ficha técnica →

W78E054C40QL

✅ Drop-In ⚠️ Especificações não verificadas
📦 44-pin PLCC (J-lead)
Same W78E054C40 family and 40 MHz class; exact suffix-specific electrical and commercial differences require datasheet confirmation.

📋 Alternativa de referência (fora do catálogo)

W78E054C40PL Classificações máximas e características elétricas

Product Type 8-bit microcontroller
Series W78 series
Instruction Set Compatibility Standard 8051 compatible
Maximum Operating Frequency 40 MHz
Program Memory Size 16 KB (16K x 8) Flash EPROM
RAM Size 256 bytes
Number of I/O Lines 36
General-Purpose I/O Ports 4 x 8-bit bidirectional, bit-addressable ports
Additional I/O Port P4, 4-bit
Timer/Counter Count 3
Timer/Counter Resolution 16-bit
Watchdog Timer Hardware watchdog timer
Serial Interface 1 serial port
Encapsulamento 44-pin PLCC

Guia de Configuração de Pinos do W78E054C40PL 44-pin plcc

Configuração de pinos para W78E054C40PL (pacote 44-pin plcc). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 44-pin plcc para W78E054C40PL

Nenhum dado detalhado de pinagem disponível para W78E054C40PL.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

W78E054C40PL é adequado para 6 aplicaçãos: Industrial Equipment Controller, Appliance and Equipment Interface, Serial-Connected Data Acquisition, Timer and Event-Counter Module, Embedded Instrumentation Panel, Legacy 8051 Firmware Platform.

🏭

Industrial Equipment Controller

The W78E054C40PL fits compact industrial control modules that must retain established 8051 firmware while exposing enough parallel I/O for sensors, relays, indicators, and actuators. Its four 8-bit bidirectional ports and additional 4-bit P4 port provide 36 I/O lines, while three 16-bit timer/counters support event counting, periodic task generation, and timing sequences. At up to 40 MHz, the MCU can execute control logic more quickly than a standard-speed 8051. The hardware watchdog timer is valuable for recovering from stalled firmware, while the serial port supports local configuration or supervisory communication. The 44-pin PLCC package is also appropriate for legacy control boards that already use through-hole footprints.

🔧

Appliance and Equipment Interface

W78E054C40PL can serve as the main interface controller in appliances and production equipment that combine local buttons, displays, relays, and serial-controlled modules. Its bit-addressable 8-bit ports allow individual digital lines to be managed efficiently in firmware, reducing the need for external input or output expanders. The three 16-bit timer/counters are useful for motor timing, pulse measurement, debouncing, and periodic control tasks. Its 40 MHz operating rate provides additional execution margin for user-interface and communication routines, while Flash EPROM retains firmware without the programming interface associated with mask-programmable 8051 devices.

🖥️

Serial-Connected Data Acquisition

The W78E054C40PL is appropriate for small data-acquisition and monitoring units where a serial link is the principal communication path. The integrated serial port can exchange commands and measurements with a host, while the general-purpose I/O lines can read discrete inputs or operate status indicators. Three 16-bit timer/counters can handle sampling intervals, pulse counting, and timeout functions without occupying most CPU time. Because program memory is limited to 16 KB and RAM to 256 bytes, firmware should use compact buffering and avoid storing large historical datasets locally. The 40 MHz rating helps execute protocol parsing, filtering, and status reporting while retaining 8051-compatible application logic.

⏱️

Timer and Event-Counter Module

W78E054C40PL can implement a dedicated timer, pulse-counter, or event-logging module where multiple timing resources are needed in a compact controller. Three 16-bit timer/counters provide independent intervals for repetitive scheduling, duration measurement, and external-event counting, while the standard 8051 instruction set simplifies porting related code. Bidirectional I/O allows counter sources to be gated, reset, or monitored, and the serial port can report accumulated values to a system controller. The hardware watchdog timer adds recovery behavior if the module stops servicing critical tasks. Designers must confirm timer modes, interrupt behavior, and external clock limits in the W78E054C datasheet.

📺

Embedded Instrumentation Panel

The W78E054C40PL can manage a compact instrumentation or diagnostic panel with switches, LEDs, displays, and a host communication link. Its 36 available I/O lines provide parallel connections for panel controls and status signaling, and the 16-bit timers can manage display refresh, button timing, or measurement intervals. The 40 MHz operating speed offers execution margin for panel logic and communication routines, while the serial port supports integration with a larger measurement system. Since the MCU has 256 bytes of RAM and 16 KB of Flash, the design should favor compact firmware and streamed data rather than elaborate local graphics. The through-hole PLCC package also simplifies repair and prototype assembly.

📱

Legacy 8051 Firmware Platform

W78E054C40PL is well suited to maintaining or modernizing equipment that already uses standard 8051 application code. Full instruction-set compatibility allows existing source modules to be reorganized around the device's Flash EPROM, timer resources, watchdog, and serial interface. This is particularly valuable when a product revision must retain proven control behavior but move beyond older ROM-based 8051 implementations or add a faster operating rate. Migration still requires a complete pin-level and peripheral-level review; instruction compatibility alone does not establish that oscillator, reset, interrupt, or port behavior is unchanged in every application.

What are the key specifications of W78E054C40PL that engineers should know?
The W78E054C40PL is an 8-bit, 40 MHz W78 microcontroller with 16 KB of Flash EPROM, 256 bytes of RAM, and 36 I/O lines in a 44-pin PLCC package. According to the Winbond W78E054C datasheet, its instruction set is fully compatible with the standard 8051. It also includes four 8-bit ports, a 4-bit P4 port, three 16-bit timer/counters, a hardware watchdog timer, and a serial port.
What is the operating frequency of W78E054C40PL?
The W78E054C40PL operates at up to 40 MHz. This frequency rating comes from the product listing and the W78E054C family datasheet, which describes the device as an 8-bit microcontroller designed for a wider frequency range with low power consumption. Confirm the applicable clock configuration and oscillator limits for the exact operating mode in the manufacturer datasheet.
How much program memory and RAM does W78E054C40PL have?
The W78E054C40PL contains 16 KB, organized as 16K x 8, of Flash EPROM and 256 bytes of RAM. According to the W78E054C datasheet, the instruction set remains compatible with the standard 8051. The Flash organization supports in-system firmware storage, while the 256-byte RAM is intended for working variables, stack operations, and short-lived data.
Is W78E054C40PL pin-compatible with the standard 8051?
The W78E054C40PL is instruction-set compatible with the standard 8051, but instruction compatibility does not by itself prove that every package pin is interchangeable with another MCU. The device uses a 44-pin PLCC package and provides four 8-bit I/O ports, P4, three timers, watchdog, and a serial port. A replacement must be checked against the full manufacturer pin description and electrical requirements.
Where can I download the W78E054C40PL datasheet PDF?
The W78E054C40PL datasheet PDF is available through the Winbond-family datasheet link on this page and through the manufacturer-data result listed in the source links. The document describes the 8051-compatible instruction set, 16 KB Flash EPROM, 256-byte RAM, I/O ports, timers, watchdog timer, and serial port. Use the pin-description and electrical-characteristics sections when finalizing a PCB design.
Where can I find the W78E054C40PL pinout?
The W78E054C40PL pinout is found in the pin-description section of the W78E054C family datasheet. The component is specified in a 44-pin PLCC package, with four 8-bit bidirectional ports, an additional 4-bit P4 port, three 16-bit timer/counters, a hardware watchdog timer, and a serial port. Assign PCB nets only after checking every power, ground, reset, clock, and I/O connection in the datasheet.
Where to buy W78E054C40PL online?
Use the Request a Quote form on this page to request W78E054C40PL pricing, stock confirmation, and lead time. The listing identifies the component as an Nuvoton Technology Corporation 8-bit, 40 MHz, 16 KB Flash microcontroller in a 44-pin PLCC package. The quote form provides a direct purchasing path without relying on a static price or potentially stale availability statement.
What is the price of W78E054C40PL?
Current W78E054C40PL pricing should be requested through the Request a Quote form on this page. The published search results identify the exact MPN and its key technical characteristics, but they do not present a qualifying quantity-break price table for extraction. The quote workflow can confirm the unit price, volume breaks, stock position, and order conditions for the intended purchase quantity.
What is the lead time for W78E054C40PL?
Request the current W78E054C40PL lead time through the Request a Quote form on this page. Lead time can depend on stock, production scheduling, package format, and order quantity, so it should be confirmed for the exact MPN rather than inferred from generic microcontroller availability. Include your requested quantity and target delivery date when submitting the request.
Is W78E054C40PL in stock?
The current stock position for W78E054C40PL should be confirmed through the Request a Quote form on this page. The component is listed as an active W78E054C40PL product with 16 KB Flash, 40 MHz operation, and a 44-pin PLCC package, but a current quantity commitment requires a transactional stock check. Provide the required quantity, date code requirements, and destination in the request.
What is the difference between W78E054C40PL and an 8051 microcontroller?
The W78E054C40PL retains compatibility with the standard 8051 instruction set while adding a 40 MHz operating rate, 16 KB of Flash EPROM, 256 bytes of RAM, 36 I/O lines, three 16-bit timer/counters, a hardware watchdog timer, and a serial port. These resources make it more practical for new compact control designs than an original basic MCS-51 implementation, although software and peripheral assumptions must still be verified.
W78E054C40PL vs W78E054C40 — which is better for a new design?
The published W78E054C40PL designation combines the W78E054C family and 40 MHz operating specification with the PLCC package indicated by the PL suffix. A separate W78E054C40 ordering code was not identified in the cross-reference results, so it cannot be assumed to have a distinct package, pinout, or lifecycle status. Select W78E054C40PL when the orderable 44-pin PLCC configuration is required.
When should I choose W78E054C40PL instead of another 8-bit MCU?
Choose W78E054C40PL when a design requires standard 8051 instruction compatibility, a 40 MHz operating rate, 16 KB of embedded Flash, 256 bytes of RAM, 36 I/O lines, three 16-bit timers, watchdog supervision, and a 44-pin PLCC footprint. It is especially suitable for legacy-compatible industrial control or instrumentation firmware. Choose another MCU when the application needs substantially more memory, wider architecture, or a different physical package.
Is W78E054C40PL suitable for industrial control applications?
The W78E054C40PL is technically suitable for many compact industrial control tasks because it combines 36 I/O lines, three 16-bit timer/counters, a hardware watchdog timer, a serial port, and 40 MHz execution in a 44-pin PLCC package. Its 16 KB Flash limit and 256-byte RAM may constrain complex communications, data logging, or modern safety functions. Confirm environmental, isolation, and regulatory requirements for the finished equipment.
What can replace W78E054C40PL?
No verified drop-in replacement for W78E054C40PL was identified in the cross-reference search results. A valid replacement must match the 44-pin PLCC footprint, pin functions, 8051 code behavior, 16 KB Flash organization, 256-byte RAM, peripheral set, clock arrangement, and electrical limits. Same-family W78E054C ordering codes should not be treated as interchangeable without confirming the exact suffix, package, and pin description.

Dados de referência de engenharia para W78E054C40PL — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose W78E054C40PL when maintaining or building an embedded system that depends on standard 8051 code, requires up to 40 MHz execution, and fits within 16 KB of Flash and 256 bytes of RAM. Its 36 I/O lines, three 16-bit timers, watchdog timer, and serial port make it especially attractive for industrial control, instrumentation, timing, and legacy firmware platforms using a 44-pin PLCC footprint. It is less suitable when the design needs extensive local buffering, complex graphical control, advanced security, or a wider high-performance architecture. No verified drop-in alternative was identified, so an engineer should not substitute another MCU based only on the 8051 instruction set or PLCC outline. Validate any proposed replacement against the complete pin description, electrical limits, clock requirements, timer behavior, interrupts, watchdog operation, and memory organization before releasing a PCB or production firmware.

Comparação com alternativas

Parâmetro Este produto
Package 44-pin PLCC
Brand Nuvoton Technology Corporation
Architecture 8-bit W78 microcontroller
Instruction Set Standard 8051 compatible
Maximum Frequency 40 MHz
Program Memory 16 KB (16K x 8) Flash EPROM
RAM 256 bytes
Number of I/O 36 lines
Timers 3 x 16-bit timer/counters
Watchdog Timer Hardware watchdog timer

Principais diferenciais

  • Combines 8051 compatibility with a 40 MHz operating rate (vs Standard-speed 8051 microcontroller)
  • Provides substantial parallel I/O in one controller (vs Typical low-pin-count 8-bit MCU)
  • Integrates three independent 16-bit timing resources (vs Single-timer 8051 design)
  • Adds hardware watchdog supervision (vs 8051 controller without a watchdog timer)

Notas de projeto

Assign the PCB footprint from the 44-pin PLCC mechanical drawing rather than treating the generic PLCC designation as sufficient. Confirm lead pitch, body dimensions, pad geometry, and whether the assembly includes a socket or direct solder attachment. Place the MCU away from long copper pours or heat sources that could complicate soldering, and provide unobstructed access for inspection and rework.

Follow the datasheet pin description for supply, ground, reset, oscillator, and I/O assignments. Keep oscillator traces short and away from high-current switching nodes, route reset with a clean return path, and place required bypass capacitors close to their designated pins. Because a complete public pin list was not available for direct transcription, use the manufacturer pin table when creating the schematic and PCB netlist.

Do not assume that instruction-set compatibility guarantees drop-in electrical compatibility. A replacement must also match the 44-pin PLCC footprint, clock arrangement, reset behavior, interrupt priorities, port electrical characteristics, memory organization, and peripheral functions. In firmware, initialize every used port direction and latch value before enabling interrupts, and include a controlled watchdog recovery path for long-running equipment.

Verify the operating-voltage range, supply-current limits, and input thresholds directly in the W78E054C datasheet before designing the power tree. Place decoupling capacitance at the locations prescribed by the manufacturer and keep high-current return currents out of the paths used by sensitive logic. The 40 MHz operating rate does not change the requirement for a stable, low-noise supply.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this exact ordering code. AEC-Q100 status is recorded as not applicable because the listed product is an industrial microcontroller rather than an automotive-qualified variant.

Dados verificados em: 2026-11-11 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

W78E054C40PL datasheet W78E054C40PL specifications W78E054C40PL pinout W78E054C40PL datasheet pdf W78E054C40PL equivalent W78E054C40PL replacement W78E054C40PL cross reference W78E054C40PL footprint W78E054C40PL price W78E054C40PL stock Nuvoton W78E054C40PL W78E054C40PL application circuit

Componentes & termos relacionados

Nuvoton Technology Corporation Winbond Electronics W78E054C40PL W78E054C 8051-compatible microcontroller 8-bit microcontroller embedded controller microprocessor semiconductor Flash EPROM program memory RAM serial port hardware watchdog timer timer/counter bit-addressable I/O P4 port PLCC package surface-mount electronics industrial control data acquisition embedded instrumentation 40 MHz clock 36 I/O lines
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ