W78E054C40PL 40MHz 8051 16KB Flash MCU | Nuvoton
料号: W78E054C40PL ✓ 量产中W78E054C40PL 概述
An 8051-compatible microcontroller is an embedded processor that combines a CPU core, program memory, data memory, I/O ports, timers, and serial communication in one integrated circuit. The W78E054C belongs to the broader hierarchy of 8-bit MCU, microprocessor, embedded controller, and semiconductor. Its combination of Flash memory, multiple I/O ports, timers, watchdog protection, and serial communication makes it suitable for compact control, monitoring, and data-acquisition equipment.
The device provides four 8-bit bidirectional, bit-addressable I/O ports and an additional 4-bit I/O port identified as P4. It also includes three 16-bit timer/counters, a hardware watchdog timer, and a serial port. These resources allow a designer to connect digital inputs and outputs, generate timing signals, measure events, and communicate with external equipment without requiring a separate collection of peripheral devices.
The W78E054C instruction set is fully compatible with the standard 8051, but the operating range and integrated Flash EPROM make this device more useful for modern embedded designs than the original MCS-51 architecture. Its 16 KB program-memory capacity is suitable for control firmware, while the 256-byte RAM supports working variables, stack operations, buffers, and communication state. The 40 MHz operating specification supports faster execution than standard-speed 8051 implementations while retaining software compatibility.
Typical uses include industrial equipment interfaces, appliance controllers, instrument panels, embedded timers, serial-connected control modules, and compact control boards. The 44-pin PLCC package provides more I/O and clock-related pins than compact leaded packages and is useful when a design needs several parallel digital lines. Designers should confirm the complete pin description, oscillator requirements, reset behavior, and electrical limits in the manufacturer datasheet before laying out a new board.
The most important design consideration is to follow the datasheet pin and connection guidance exactly, particularly for the oscillator, reset, supply, and I/O pins. Keep power and ground connections short, provide the specified decoupling arrangement, and route high-current outputs away from sensitive clock and reset traces. Firmware should also use the watchdog timer and the device’s timer resources to improve fault recovery and deterministic control behavior.
This product page consolidates the device’s published architecture, memory, speed, I/O, package, and interface characteristics with application guidance, comparison criteria, and practical design notes. It helps engineers identify whether the 8051-compatible instruction set, 40 MHz performance, Flash memory, and 36 I/O lines fit a specific embedded-control design without changing the MCU architecture.
直接替换替代料: W78E054C40PL ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: W78E054C40PL (相同外形与封装尺寸) ——差异在于 Package, Program Memory Size, RAM Size, Product Type.
W78E054C40CL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
W78E054C40DL
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →W78E054C40QL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
W78E054C40PL 最大额定值与电气特性
| Product Type | 8-bit microcontroller |
| Series | W78 series |
| Instruction Set Compatibility | Standard 8051 compatible |
| Maximum Operating Frequency | 40 MHz |
| Program Memory Size | 16 KB (16K x 8) Flash EPROM |
| RAM Size | 256 bytes |
| Number of I/O Lines | 36 |
| General-Purpose I/O Ports | 4 x 8-bit bidirectional, bit-addressable ports |
| Additional I/O Port | P4, 4-bit |
| Timer/Counter Count | 3 |
| Timer/Counter Resolution | 16-bit |
| Watchdog Timer | Hardware watchdog timer |
| Serial Interface | 1 serial port |
| 封装 | 44-pin PLCC |
W78E054C40PL 44-pin plcc 引脚配置指南
W78E054C40PL(44-pin plcc 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: W78E054C40PL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
W78E054C40PL 适用于 6 应用s: Industrial Equipment Controller, Appliance and Equipment Interface, Serial-Connected Data Acquisition, Timer and Event-Counter Module, Embedded Instrumentation Panel, Legacy 8051 Firmware Platform.
Industrial Equipment Controller
The W78E054C40PL fits compact industrial control modules that must retain established 8051 firmware while exposing enough parallel I/O for sensors, relays, indicators, and actuators. Its four 8-bit bidirectional ports and additional 4-bit P4 port provide 36 I/O lines, while three 16-bit timer/counters support event counting, periodic task generation, and timing sequences. At up to 40 MHz, the MCU can execute control logic more quickly than a standard-speed 8051. The hardware watchdog timer is valuable for recovering from stalled firmware, while the serial port supports local configuration or supervisory communication. The 44-pin PLCC package is also appropriate for legacy control boards that already use through-hole footprints.
推荐
Appliance and Equipment Interface
W78E054C40PL can serve as the main interface controller in appliances and production equipment that combine local buttons, displays, relays, and serial-controlled modules. Its bit-addressable 8-bit ports allow individual digital lines to be managed efficiently in firmware, reducing the need for external input or output expanders. The three 16-bit timer/counters are useful for motor timing, pulse measurement, debouncing, and periodic control tasks. Its 40 MHz operating rate provides additional execution margin for user-interface and communication routines, while Flash EPROM retains firmware without the programming interface associated with mask-programmable 8051 devices.
推荐
Serial-Connected Data Acquisition
The W78E054C40PL is appropriate for small data-acquisition and monitoring units where a serial link is the principal communication path. The integrated serial port can exchange commands and measurements with a host, while the general-purpose I/O lines can read discrete inputs or operate status indicators. Three 16-bit timer/counters can handle sampling intervals, pulse counting, and timeout functions without occupying most CPU time. Because program memory is limited to 16 KB and RAM to 256 bytes, firmware should use compact buffering and avoid storing large historical datasets locally. The 40 MHz rating helps execute protocol parsing, filtering, and status reporting while retaining 8051-compatible application logic.
推荐
Timer and Event-Counter Module
W78E054C40PL can implement a dedicated timer, pulse-counter, or event-logging module where multiple timing resources are needed in a compact controller. Three 16-bit timer/counters provide independent intervals for repetitive scheduling, duration measurement, and external-event counting, while the standard 8051 instruction set simplifies porting related code. Bidirectional I/O allows counter sources to be gated, reset, or monitored, and the serial port can report accumulated values to a system controller. The hardware watchdog timer adds recovery behavior if the module stops servicing critical tasks. Designers must confirm timer modes, interrupt behavior, and external clock limits in the W78E054C datasheet.
推荐
Embedded Instrumentation Panel
The W78E054C40PL can manage a compact instrumentation or diagnostic panel with switches, LEDs, displays, and a host communication link. Its 36 available I/O lines provide parallel connections for panel controls and status signaling, and the 16-bit timers can manage display refresh, button timing, or measurement intervals. The 40 MHz operating speed offers execution margin for panel logic and communication routines, while the serial port supports integration with a larger measurement system. Since the MCU has 256 bytes of RAM and 16 KB of Flash, the design should favor compact firmware and streamed data rather than elaborate local graphics. The through-hole PLCC package also simplifies repair and prototype assembly.
推荐
Legacy 8051 Firmware Platform
W78E054C40PL is well suited to maintaining or modernizing equipment that already uses standard 8051 application code. Full instruction-set compatibility allows existing source modules to be reorganized around the device's Flash EPROM, timer resources, watchdog, and serial interface. This is particularly valuable when a product revision must retain proven control behavior but move beyond older ROM-based 8051 implementations or add a faster operating rate. Migration still requires a complete pin-level and peripheral-level review; instruction compatibility alone does not establish that oscillator, reset, interrupt, or port behavior is unchanged in every application.
推荐
工程参考数据: W78E054C40PL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 44-pin PLCC |
| Brand | Nuvoton Technology Corporation |
| Architecture | 8-bit W78 microcontroller |
| Instruction Set | Standard 8051 compatible |
| Maximum Frequency | 40 MHz |
| Program Memory | 16 KB (16K x 8) Flash EPROM |
| RAM | 256 bytes |
| Number of I/O | 36 lines |
| Timers | 3 x 16-bit timer/counters |
| Watchdog Timer | Hardware watchdog timer |
关键差异点
- Combines 8051 compatibility with a 40 MHz operating rate (对比 Standard-speed 8051 microcontroller)
- Provides substantial parallel I/O in one controller (对比 Typical low-pin-count 8-bit MCU)
- Integrates three independent 16-bit timing resources (对比 Single-timer 8051 design)
- Adds hardware watchdog supervision (对比 8051 controller without a watchdog timer)
设计说明
Assign the PCB footprint from the 44-pin PLCC mechanical drawing rather than treating the generic PLCC designation as sufficient. Confirm lead pitch, body dimensions, pad geometry, and whether the assembly includes a socket or direct solder attachment. Place the MCU away from long copper pours or heat sources that could complicate soldering, and provide unobstructed access for inspection and rework.
Follow the datasheet pin description for supply, ground, reset, oscillator, and I/O assignments. Keep oscillator traces short and away from high-current switching nodes, route reset with a clean return path, and place required bypass capacitors close to their designated pins. Because a complete public pin list was not available for direct transcription, use the manufacturer pin table when creating the schematic and PCB netlist.
Do not assume that instruction-set compatibility guarantees drop-in electrical compatibility. A replacement must also match the 44-pin PLCC footprint, clock arrangement, reset behavior, interrupt priorities, port electrical characteristics, memory organization, and peripheral functions. In firmware, initialize every used port direction and latch value before enabling interrupts, and include a controlled watchdog recovery path for long-running equipment.
Verify the operating-voltage range, supply-current limits, and input thresholds directly in the W78E054C datasheet before designing the power tree. Place decoupling capacitance at the locations prescribed by the manufacturer and keep high-current return currents out of the paths used by sensitive logic. The 40 MHz operating rate does not change the requirement for a stable, low-noise supply.
合规信息
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this exact ordering code. AEC-Q100 status is recorded as not applicable because the listed product is an industrial microcontroller rather than an automotive-qualified variant.