Cirrus Logic Inc.

WM1800CGEFL/V - 32-QFN Audio Codec IC, Sigma-Delta | Cirrus Logic

N.º da peça: WM1800CGEFL/V ✗ Fim de vida
QFN-32, 5 x 5 x 0.9 mm Package
MOQ: 1 |

WM1800CGEFL/V Visão geral

The Cirrus Logic WM1800CGEFL/V is a mixed-signal audio codec integrated circuit from the Wolfson Microelectronics product line, supplied as a tested 32-pin QFN surface-mount device in a 5 x 5 x 0.9 mm no-lead package. Distributor catalogues place the WM1800 family under the Analog & Mixed Signal / CODECs classification, and the device is built around a sigma-delta conversion architecture for audio signal paths.

An audio codec is a mixed-signal integrated circuit that translates between digital audio data streams and analog audio voltages. It sits inside the wider semiconductor hierarchy as a mixed-signal IC, more specifically a codec, and it usually pairs one or more analog-to-digital converters with one or more digital-to-analog converters plus the digital interface logic needed to move audio frames to and from a host processor. Because the codec performs both conversion directions on the same die, it saves board area and simplifies the analog signal chain around it.

Key characteristics of the WM1800CGEFL/V include its 32-pin QFN-32 footprint, the compact 5 x 5 x 0.9 mm body, and the sigma-delta conversion topology identified in the component listings. The part is offered in a tested condition for industrial and repair-grade sourcing, and the /V ordering suffix corresponds to tube packaging while the /RV suffix denotes the tape-and-reel presentation of the same device. RoHS status is listed inconsistently across supply-chain listings, with some entries marked compliant and others marked not compliant, so the declaration should be confirmed against the specific lot paperwork before use in a certified build.

Technically the device integrates its converters, reference and interface circuitry into a single no-lead QFN. QFN construction means there are no protruding gull-wing leads, so the part cannot be hand-soldered and is placed by pick-and-place with a bottom-side thermal and ground land pattern. The published listings confirm a sigma-delta converter architecture, which is the standard choice for high-resolution audio because it pushes the quantisation noise out of band where it is removed by the digital decimation filters.

Typical uses include portable and personal-audio equipment, headset and docking-station interfaces, USB audio accessories, compact consumer audio appliances and equipment-repair and legacy-platform builds where an original audio codec has to be replaced without redesigning the printed circuit board. In each case the codec sits between an analog microphone or line input and a digital audio bus, or between a digital stream and an analog headphone or line output.

The main design consideration is that this is a mature catalog part from the Wolfson Microelectronics range, so engineers should confirm the exact pin assignment, supply rails, converter resolution and clocking requirements from the manufacturer datasheet before committing to a design, and should verify that the surrounding decoupling and grounding topology matches the reference circuit for the specific variant. Because the package is QFN-32 with a bottom thermal land, board-level copper must be adequate for the dissipation of the codec in a densely packed portable product.

This page combines distributor catalogue data, ordering-code analysis, drop-in ordering options and practical integration notes for the WM1800CGEFL/V in a single place, giving engineers sourcing and design information beyond the short catalogue entry.

Alternativas drop-in para WM1800CGEFL/V — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

WM1800CGEFL/RV

✅ Drop-In
📦 QFN-32, 5 x 5 x 0.9 mm
Identical WM1800 audio codec die and 32-pin QFN footprint; only the packing format changes from tube (/V) to tape-and-reel (/RV), so supply route and MOQ differ while all electrical parameters match

📋 Alternativa de referência (fora do catálogo)

WM1800CGEFL

✅ Drop-In
📦 QFN-32, 5 x 5 x 0.9 mm
Base catalog ordering code of the same 32-pin QFN WM1800 codec with identical sigma-delta architecture; differs from /V only in packing/sourcing convention, with no change in pinout or converter specification

📋 Alternativa de referência (fora do catálogo)

WM1800GEFL

✅ Drop-In
📦 QFN-32, 5 x 5 x 0.9 mm
Family order code listed for the same WM1800 codec in the 32-pin QFN body; the ordering suffix pattern differs from /V, with no pin or functional change expected on the shared land pattern

📋 Alternativa de referência (fora do catálogo)

WM1800CGEFL/V Classificações máximas e características elétricas

Device Type Audio codec (mixed-signal IC)
Manufacturer Wolfson Microelectronics (Cirrus Logic)
Categoria Analog & Mixed Signal / CODECs
Encapsulamento QFN-32, 5 x 5 x 0.9 mm
Contagem de pinos 32 pins
Tipo de montagem Surface mount (no-lead QFN)
Converter Architecture Sigma-delta
Condition Tested
Packing Option (/V suffix) Tube
Status do ciclo de vida Legacy catalog part, currently offered through tested/surplus distribution channels

Guia de Configuração de Pinos do WM1800CGEFL/V qfn-32, 5 x 5 x 0.9 mm

Configuração de pinos para WM1800CGEFL/V (pacote qfn-32, 5 x 5 x 0.9 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote qfn-32, 5 x 5 x 0.9 mm para WM1800CGEFL/V

Nenhum dado detalhado de pinagem disponível para WM1800CGEFL/V.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

WM1800CGEFL/V é adequado para 6 aplicaçãos: Portable USB Audio Dongles, Headset and Earbud Interface Boards, Docking Stations and Speakerphone Cradles, Legacy Equipment Repair and Replacement, Digital-to-Analog Line Output Modules, IoT Voice Front-Ends.

🎧

Portable USB Audio Dongles

The WM1800CGEFL/V fits compact USB audio dongles where a single 32-pin QFN package has to provide both analog capture and analog playback around a USB audio controller. Integrating the conversion stages in one 5 x 5 x 0.9 mm no-lead body keeps the analog footprint small and the bill of materials short, which matters when the dongle housing is only a few millimetres above the PCB. The sigma-delta architecture listed for this family suits the high-resolution playback paths typical of these adapters. During layout, reserve the bottom land as the ground and thermal connection of the QFN and keep the microphone and output coupling paths away from the digital interface nets. Because this is a legacy catalog device, verify the exact clocking scheme, supply rails and audio interface format from the manufacturer datasheet for the ordering code before the first board revision.

🎧

Headset and Earbud Interface Boards

In headset, gaming headset and earbud accessory designs, the WM1800CGEFL/V provides the bridge between a digital audio link and the analog microphone plus headphone drive path. Its 32-pin QFN package allows the codec, amplifier and connector to be placed on the same side of a slim flex board, and the single-device codec arrangement reduces the number of high-speed analog routing transitions compared with discrete converters. The published sigma-delta conversion topology is appropriate for the wide dynamic range expected of voice-chat and music playback in these products. Keep the analog ground and digital return paths separated according to the datasheet reference layout, and confirm the required analog and digital supply rails before assigning the power tree, since the part is a mature catalog device whose full electrical detail must be read from the manufacturer datasheet.

🔧

Docking Stations and Speakerphone Cradles

Docking stations, speakerphone cradles and desktop audio accessories use the WM1800CGEFL/V to convert between the digital stream arriving from a host device and the analog line or speaker path of the accessory. The 32-pin QFN body leaves board area in a crowded dock enclosure for the power management and connectivity sections, and the single-package codec approach shortens the analog path between the connector and the amplifier, reducing susceptibility to EMI pickup. The legacy nature of this device makes it a natural fit for products that must extend the life of an existing platform rather than for a newly launched mass-market accessory. Confirm the supported audio interface, master clock requirements and any digital de-emphasis or filter configuration from the manufacturer datasheet, and validate the ripple seen by the codec when the same rail also feeds switching regulators in the dock.

🔧

Legacy Equipment Repair and Replacement

The WM1800CGEFL/V is used in repair and replacement builds of professional and consumer audio equipment originally designed around the Wolfson Microelectronics WM1800 codec. Because the /V code is supplied in a tested condition and the identical part is available in tube and tape-and-reel formats, a failed board can be restored without any redesign of the original layout. The 32-pin QFN land pattern is unchanged across the ordering codes, so the rework operation is a straightforward removal of the old device and reflow of the replacement. Before ordering, match the ordering code on the failed board against the package and revision marking so the replacement is the correct variant, and cross-check the pin assignment against the manufacturer datasheet during rework to confirm continuity on the analog and digital rails.

🎚

Digital-to-Analog Line Output Modules

In line-output modules for amplifiers, mixers and instrument equipment, the WM1800CGEFL/V provides a compact digital-to-analog path from a digital audio bus to a balanced or unbalanced analog line output. The 32-pin QFN footprint makes the codec practical where the converter must sit close to the output connector to keep the high-impedance analog leg short and shielded. The listed sigma-delta conversion architecture suits the resolution and dynamic range expected of studio-class line stages, while the compact body leaves routing space for the output protection and coupling network. Ground the exposed bottom land to the analog ground plane region and follow the datasheet reference layout for decoupling, and confirm the digital supply level and audio data format so the source controller can be configured correctly for the codec interface.

🧩

IoT Voice Front-Ends

Voice front-ends for IoT speaker nodes and smart-home audio devices can use the WM1800CGEFL/V to handle the analog microphone capture and the playback stream in a single package. Consolidating the converters into one 32-pin QFN device reduces the number of external components and PCB area, which is valuable in a sealed enclosure with limited ventilation and minimal passive volume. The digital interface characteristics and converter resolution must be read from the manufacturer datasheet for the specific ordering code to confirm the sampling rate and framing are supported by the host processor, since the published catalogue data identifies only a standard data interface. Plan the analog microphone biasing and the digital microphone path carefully, keep the codec supply on a filtered rail, and verify the operating temperature range against the enclosure conditions before committing to a production build.

What is the WM1800CGEFL/V?
The WM1800CGEFL/V is a mixed-signal audio codec integrated circuit from the Wolfson Microelectronics range, now supplied by Cirrus Logic. It is a 32-pin QFN device in a 5 x 5 x 0.9 mm no-lead package, built around a sigma-delta conversion architecture and offered in a tested condition for legacy equipment builds and repairs. Distributor catalogues classify the device under Analog & Mixed Signal in the CODECs sub-category, which places it among the audio conversion ICs used to interface analog microphones or line inputs and analog headphone or line outputs with a digital audio bus.
What package does the WM1800CGEFL/V use?
The WM1800CGEFL/V is supplied in a 32-pin QFN package measuring 5 x 5 x 0.9 mm. Catalog listings describe it as QFN32_5x5x0.9, a leadless chip carrier with no protruding gull-wing leads and an exposed bottom land used for thermal and ground connection. Because there are no visible leads, the device cannot be hand-soldered and must be placed by pick-and-place equipment. The bottom land also means the PCB layout must provide adequate copper area underneath the package for heat spreading and a low-impedance return path.
What are the key specifications of the WM1800CGEFL/V that engineers should know?
The key published characteristics of the WM1800CGEFL/V are its 32-pin count, the 5 x 5 x 0.9 mm QFN-32 body, the sigma-delta converter architecture, the standard digital data interface, and standard-resolution converter stages. The part is supplied as a tested unit and is catalogued in the Analog & Mixed Signal / CODECs class. Full converter resolution, ADC and DAC counts, signal-to-noise ratio, dynamic range, analog and digital supply rails, and the operating temperature range must be taken from the manufacturer datasheet for the specific ordering code.
Where can I buy the WM1800CGEFL/V online?
The WM1800CGEFL/V can be ordered through the Request a Quote form on this page. Because the WM1800 is a mature catalog part, most supply comes from tested and surplus distribution channels rather than from active production inventory, so the quote request is the fastest route to confirming availability, minimum order quantity and current lead time for your quantity band. Reference the exact ordering code including the /V suffix and the 32-pin QFN package when submitting the request, since base and /RV order codes are packed differently.
What is the price of the WM1800CGEFL/V?
Pricing for the WM1800CGEFL/V is maintained as live structured data and is not restated in this text, because it changes with quantity band, condition and sourcing channel. Use the Request a Quote form on this page to obtain the current unit price for your required quantities. When quoting, state the quantity bands you need, the required packing (tube for the /V suffix or tape-and-reel for the /RV suffix) and whether you need factory-new or tested surplus material, since these three inputs drive the quotation for this legacy codec.
What is the lead time and stock situation for the WM1800CGEFL/V?
Lead time and stock for the WM1800CGEFL/V are confirmed through the Request a Quote form on this page, because stock for legacy codecs moves with remnant and tested-inventory batches rather than with a steady production schedule. Expect that larger quantities are supported from a different sourcing batch than small quantities, so state your full annual and prototype volumes on the request. If a build schedule is critical, request the date code and a per-lot consistency commitment so the same revision of silicon is used across production runs.
WM1800CGEFL/V vs WM1800CGEFL/RV - which ordering code should I pick?
The WM1800CGEFL/V and WM1800CGEFL/RV are the same 32-pin QFN audio codec in different packing formats, so choose by how your assembler handles the device rather than by electrical specification. The /V suffix corresponds to tube packing, which suits prototype and low-volume builds where parts are loaded one at a time or in small groups. The /RV suffix corresponds to tape-and-reel presentation, which suits high-volume automated pick-and-place lines with reel-to-reel feeders. Verify against the manufacturer datasheet ordering information for your specific reel or tube configuration before committing.
What is the difference between the WM1800CGEFL/V and the WM1800CGEFL?
The WM1800CGEFL/V is the tube-packed ordering code for the WM1800 audio codec, while the WM1800CGEFL is the base ordering code with no packing suffix. Both refer to the same 32-pin QFN device in the same 5 x 5 x 0.9 mm footprint with the same sigma-delta conversion architecture, so they are electrically interchangeable and share one PCB footprint. The practical differences are the packing format, the minimum order quantity and the route by which each code is sourced, which matters most when your assembly line expects a specific feeder format.
When should I choose the WM1800CGEFL/V over the WM1800CGEFL?
Choose the WM1800CGEFL/V when your assembly process consumes parts in tubes or when you are building prototypes and small production batches that do not justify a full reel. The base WM1800CGEFL code is the better choice for automated high-volume lines with reel feeders and for buyers who want the widest availability across multiple supply channels. Neither choice changes the electrical design: both are 32-pin QFN parts with an identical land pattern, so board layout and firmware support are unaffected by the ordering code.
Is the WM1800CGEFL/V suitable for portable USB audio and headset accessories?
The WM1800CGEFL/V is a suitable candidate for portable audio and headset accessory designs because it integrates the analog-to-digital and digital-to-analog conversion stages into a single 32-pin QFN package, which keeps the footprint small enough for compact dongles and docking hardware. The device is a legacy catalog part, so confirm the converter resolution, supply rails, clocking scheme and audio interface format against the manufacturer datasheet for the exact ordering code before starting layout. For new, high-volume consumer programs it is worth evaluating a currently active codec alongside this part.
What is the best drop-in replacement for the WM1800CGEFL/V?
The best drop-in replacement for the WM1800CGEFL/V is the WM1800CGEFL/RV, which is the same 32-pin QFN audio codec in a tape-and-reel package and drops into the identical land pattern without any PCB changes. The base WM1800CGEFL is the second drop-in option, differing only in packing format and sourcing route. Because the WM1800 is a mature catalog part, no newer codec from another manufacturer has been confirmed as a pin-compatible substitute in the cross-reference data for this device, so board redesign would be needed to move to a different family.
Where can I download the WM1800CGEFL/V datasheet PDF?
The manufacturer datasheet for the WM1800 audio codec is the authoritative source for the pin list, supply rails, converter specifications and recommended application circuit. Datasheet copies are distributed through component catalogue pages for this part, and the product entry linked from this page leads to the Wolfson Microelectronics device documentation. Use the datasheet to assign every one of the 32 QFN pins when laying out the board, and to confirm the exposed-land connection and decoupling values rather than inferring them from catalogue listings.
Where can I find the WM1800CGEFL/V pinout?
The pinout for the WM1800CGEFL/V is defined in the manufacturer datasheet for the WM1800 family, where all 32 QFN pins are listed with their signal names. Because the part is a leadless 32-pin package, the pin-1 marker and the counter-clockwise numbering convention must be read carefully against the land pattern in the datasheet before tracks are assigned. Do not infer the pinout from the catalogue description alone: the analogue supply, digital supply, ground and audio data pins must each be taken from the datasheet pin-description table to avoid an incorrect footprint.
What can replace the WM1800CGEFL/V?
Parts that can replace the WM1800CGEFL/V without board changes are the WM1800CGEFL/RV and the WM1800CGEFL, since both are the same WM1800 audio codec in the same 32-pin QFN package with the same sigma-delta conversion architecture. They differ only in packing format and sourcing channel, so the practical replacement question is usually about availability rather than electrical compatibility. If neither ordering code meets your volume, date-code or traceability requirement, request a quotation for the /V code on this page to discuss batch options.
Is the WM1800CGEFL/V the same as the WM1800CGEFL?
The WM1800CGEFL/V and the WM1800CGEFL are the same device in different order codes. Both are the WM1800 audio codec from the Wolfson Microelectronics range, both use the 32-pin QFN package measuring 5 x 5 x 0.9 mm, and both are pin-to-pin compatible on the same PCB footprint. The only difference is the packing suffix, where /V denotes the tube-packed version used for prototypes and small builds and the unsuffixed code is the general catalog ordering code. Electrically, firmware and layout work are identical between the two.

Dados de referência de engenharia para WM1800CGEFL/V — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the WM1800CGEFL/V when you are building or repairing hardware that used the WM1800 audio codec and your assembly line consumes parts from tubes or you need modest volumes without committing to a full reel. Choose the WM1800CGEFL/RV when the same board runs on automated pick-and-place with reel feeders, since it is the tape-and-reel presentation of the identical device. Choose the base WM1800CGEFL when you want the widest availability across supply channels and are flexible on packing. All three are the same 32-pin QFN die, so no layout, firmware or bill-of-material electrical change is required when you swap between them. If your product is a newly launched mass-market design, evaluate a currently active audio codec alongside this part, since the WM1800 is a mature catalog device and its long-term supply, RoHS declaration and lot traceability are the practical constraints rather than its electrical performance.

Comparação com alternativas

Parâmetro Este produto WM1800CGEFL/RV WM1800CGEFL WM1800GEFL
Package QFN-32, 5 x 5 x 0.9 mm QFN-32, 5 x 5 x 0.9 mm - same QFN-32, 5 x 5 x 0.9 mm - same QFN-32, 5 x 5 x 0.9 mm - same
Brand Cirrus Logic (Wolfson Microelectronics) Cirrus Logic (Wolfson Microelectronics) Cirrus Logic (Wolfson Microelectronics) Cirrus Logic (Wolfson Microelectronics)
Device Category Audio codec, Analog & Mixed Signal Audio codec, Analog & Mixed Signal Audio codec, Analog & Mixed Signal Audio codec, Analog & Mixed Signal
Pin Count 32 pins 32 pins 32 pins 32 pins
Converter Architecture Sigma-delta Sigma-delta Sigma-delta Sigma-delta
Packing Format Tube (/V suffix) Tape and reel (/RV suffix) Base catalog code, packing per manufacturer ordering table Family code, packing per manufacturer ordering table
Condition Tested Tested / legacy distribution Tested / legacy distribution Catalog availability via distribution

Principais diferenciais

  • Drop-in identical land pattern across all three ordering codes (vs WM1800CGEFL/RV)
  • Single-package analog capture and playback consolidation (vs WM1800CGEFL)
  • Legacy availability with a tested option for repair builds (vs WM1800GEFL)

Notas de projeto

The WM1800CGEFL/V is a leadless 32-pin QFN, so the layout must be taken directly from the datasheet land pattern rather than scaled from a generic footprint. Define a solder mask opening that matches the exposed bottom land, keep the land free of copper-defined solder mask dams that could trap solder, and route the exposed land to the analog ground reference used in the reference layout. Because the package is only 0.9 mm tall with no side leads, there is no visual confirmation of wicking during rework; verify each pin with a microscope after reflow.

The most common error on this device is ordering the wrong packing suffix and then discovering the mismatch at the assembly line: /V is tube-packed while /RV is tape-and-reel, and the base code has no suffix. State the required feeder format, the quantity and the acceptable condition on the purchase order so the delivered parts match the assembly plan. Also check the RoHS declaration, since catalogue listings for this legacy codec show both compliant and not-compliant markings, and request lot paperwork for certified builds.

Keep the analog microphone and line inputs away from the digital audio interface nets and from the switching nodes of any adjacent DC-DC converter. A common layout mistake on legacy audio designs is to route the codec supply from a noisy regulator without local filtering; add the datasheet-recommended bulk and high-frequency decoupling directly at the analog and digital supply pins, and give the codec an uninterrupted ground return path to the star point of the analog section.

Estimate the codec dissipation from the analog and digital currents given in the manufacturer datasheet multiplied by the corresponding supply rails, then check that the bottom land of the QFN has enough copper to keep the junction temperature within margin inside a sealed enclosure. In compact portable products the surrounding parts, rather than the codec, usually set the internal temperature, so measure the case temperature during thermal soak testing rather than assuming an ambient-based estimate. Reduce supply loss and heat by running the digital core at the lowest rail that meets the timing requirement.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Supply-chain listings for this legacy codec show conflicting RoHS entries, one marking the Cirrus Logic line item compliant and another not compliant, so the overall RoHS status is recorded as unknown pending lot-specific documentation. The device is a mixed-signal audio IC and is not AEC-Q100 qualified.

Dados verificados em: 2026-11-16 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

WM1800CGEFL/V WM1800CGEFL/V datasheet WM1800CGEFL/V datasheet pdf WM1800CGEFL pinout WM1800 audio codec specifications Cirrus Logic WM1800CGEFL/V WM1800CGEFL QFN-32 footprint WM1800CGEFL/V vs WM1800CGEFL/RV WM1800CGEFL/V drop-in replacement WM1800CGEFL/V usb audio dongle WM1800CGEFL/V price WM1800CGEFL/V stock and lead time WM1800CGEFL/V replacement for failed codec Wolfson WM1800 codec 32-QFN

Componentes & termos relacionados

Cirrus Logic Wolfson Microelectronics WM1800CGEFL/V WM1800CGEFL/RV WM1800CGEFL WM1800GEFL audio codec mixed-signal integrated circuit codec sigma-delta converter digital-to-analog converter analog-to-digital converter QFN-32 QFN package family surface mount SMD I2S audio interface USB audio headphone amplifier electret microphone analog ground exposed land RoHS legacy catalog part tested surplus
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ