WM8569SEDS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic
N.º da peça: WM8569SEDS/RV ✓ AtivoWM8569SEDS/RV Visão geral
An audio codec is a mixed-signal integrated circuit that converts digital audio samples into analog signals and analog sound into digital data. Within the signal-chain hierarchy, a stereo codec belongs to the interface IC and audio-codec class of broader integrated circuits. Its digital interface connects to a host processor, while its analog inputs and outputs provide the physical connection to microphones, line-level equipment, amplifiers, speakers, and audio processing circuits.
The WM8569SEDS/RV supports 24-bit processing at rates up to 192 kSPS. According to the Wolfson Microelectronics manufacturer datasheet, the ADC signal-to-noise ratio is typically 100 dB and the DAC signal-to-noise ratio is typically 103 dB. The codec includes two ADC channels, two DAC channels, stereo volume control, and an SPI-compatible digital interface. These characteristics make it suitable for consumer audio, communications, and embedded audio systems requiring more than basic playback capability.
The device combines high-resolution conversion with integrated level control, reducing the need for separate digital volume-control circuitry. Its 192 kSPS maximum rate supports high-resolution digital audio, while the SPI interface provides a compact connection to microcontrollers, digital signal processors, and application-specific processors. The 5.30 mm-wide 28-pin SSOP also offers a lower-area option than many larger leaded or high-pin-count audio packages.
Typical uses include digital active loudspeakers, personal audio equipment, communications terminals, USB or portable audio systems, and embedded playback platforms. In a typical signal path, digital samples enter through SPI, pass through the DAC and volume-control functions, and leave through the stereo analog outputs. An ADC path can simultaneously capture two analog channels for monitoring, voice processing, or digital capture.
PCB design should preserve analog and digital signal separation, provide short return paths for analog outputs, and place decoupling and input-filter components close to their associated pins. The analog and digital ground strategy, supported passive values, and supported clock configuration should be taken directly from the manufacturer datasheet and reference circuit rather than inferred from generic codec layouts.
This product page combines the manufacturer-level conversion specifications, package information, pricing workflow, drop-in assessment, and practical integration guidance. It also distinguishes genuine replacement options from package-only lookalikes and identifies which board-level decisions still require confirmation from the full datasheet.
Alternativas drop-in para WM8569SEDS/RV — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com WM8569SEDS/RV (mesmo formato e footprint) — diferindo em Maximum Sampling Rate, Package.
WM8569SEDS/V
✅ Drop-InConsulte o preço
Ver ficha técnica →WM8569SEDS/V
✅ Drop-InConsulte o preço
Ver ficha técnica →WM8569SEDS/RV Classificações máximas e características elétricas
| Device Type | Stereo audio codec |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 192 kSPS |
| ADC Channels | 2 channels |
| DAC Channels | 2 channels |
| ADC Signal-to-Noise Ratio | 100 dB typical |
| DAC Signal-to-Noise Ratio | 103 dB typical |
| Digital Audio Interface | SPI |
| Integrated Volume Control | Yes |
| Minimum Operating Temperature | -25 °C |
| Maximum Operating Temperature | 85 °C |
| Encapsulamento | 28-pin SSOP, 5.30 mm wide |
| Tipo de montagem | Surface mount |
| Packaging Method | Tape and reel |
Guia de Configuração de Pinos do WM8569SEDS/RV 28-pin ssop, 5.30 mm wide
Configuração de pinos para WM8569SEDS/RV (pacote 28-pin ssop, 5.30 mm wide). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para WM8569SEDS/RV.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
WM8569SEDS/RV é adequado para 6 aplicaçãos: Digital Active Loudspeakers, USB and Portable Audio, Communications Terminal Audio, Digital Recording and Monitoring, Consumer Audio Equipment, Industrial Audio Control.
Digital Active Loudspeakers
The WM8569SEDS/RV suits digital active-loudspeaker designs that decode audio samples in a host processor and reproduce them through analog power-amplifier stages. Its two DAC channels support a conventional stereo signal path, while the 24-bit conversion capability preserves high-resolution source data up to 192 kSPS. The SPI interface limits the number of host connections and is useful in compact products where board area is constrained. Place the codec close to the analog amplifier inputs, use short output routes, and follow the manufacturer reference network to control distortion and high-frequency behavior.
Recomendado
USB and Portable Audio
The WM8569SEDS/RV can serve as the analog playback interface in portable or USB-connected audio equipment when a host controller accepts serial audio data. The two 24-bit DACs provide stereo playback, and the maximum 192 kSPS rate supports high-resolution source formats when the complete clock and interface chain supports that rate. Its 5.30 mm-wide SSOP package helps reduce PCB area, although careful grounding remains important when switching digital supply noise reaches the analog output stage.
Recomendado
Communications Terminal Audio
The WM8569SEDS/RV is applicable to communications terminals that require simultaneous voice capture and playback with one compact stereo codec. Two ADC channels can accept line-level or appropriately conditioned microphone signals, while two DAC channels provide left and right monitoring or playback outputs. The 24-bit, 192 kSPS conversion capability is useful when the surrounding architecture supports high-rate processing. Use the manufacturer analog-input network, low-noise supply arrangement, and recommended grounding scheme to preserve the typical 100 dB ADC signal-to-noise performance.
Recomendado
Digital Recording and Monitoring
The WM8569SEDS/RV can support two-channel digital recording when analog capture channels feed an embedded processor through the codec's digital interface. Its two ADC channels allow stereo or dual-source monitoring, and its 103 dB typical DAC signal-to-noise ratio provides a clean reference path for immediate playback. The same device can support simultaneous capture and monitoring without adding a separate playback codec, saving board area. Designers should verify supported clock modes, record format, and channel mapping in the manufacturer interface documentation.
Recomendado
Consumer Audio Equipment
The WM8569SEDS/RV fits consumer audio products requiring both playback and capture from a single stereo codec, including compact stereos and networked entertainment accessories. The integrated volume-control function simplifies signal-level management, while the SPI connection works well with microcontrollers and embedded processors. Its surface-mount 28-pin SSOP package supports automated assembly, and the specified -25 °C to 85 °C operating range covers many indoor commercial environments. Component values and analog filtering should remain consistent with the manufacturer reference design.
Recomendado
Industrial Audio Control
The WM8569SEDS/RV can be used in industrial audio-control equipment where a controller must monitor incoming analog signals and generate stereo audio prompts or test tones. Its two ADC paths support simultaneous source monitoring, while its DAC outputs can feed an external amplifier or line-level driver. The 24-bit conversion format and 192 kSPS capability provide headroom for professional monitoring tasks, although the selected clock rate should match the processor and downstream signal chain. Industrial temperature qualification beyond the specified range requires a different device.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para WM8569SEDS/RV — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | WM8569SEDS/V | WM8569 |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 28-pin SSOP, 5.30 mm width | 28-pin SSOP | 28-pin SSOP |
| Device Type | Stereo audio codec | Stereo audio codec | Stereo audio codec |
| Converter Resolution | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kSPS | 192 kSPS | 192 kSPS |
| ADC Channels | 2 channels | 2 channels | 2 channels |
| DAC Channels | 2 channels | 2 channels | 2 channels |
| Digital Audio Interface | SPI | SPI | SPI |
Principais diferenciais
- Combines stereo capture, playback, and volume control (vs WM8569SEDS/V)
- Supports high-resolution stereo conversion (vs WM8569)
- Compact surface-mount implementation (vs WM8569SEDS/V)
Notas de projeto
Place the manufacturer's recommended input, output, reference, and bypass components close to their associated pins. Route analog input and output traces away from the SPI clock line, especially when operating at high sample rates. Use the datasheet reference layout for component placement and keep the analog signal ground return short and controlled to reduce coupling into the 100 dB ADC and 103 dB DAC signal paths.
Use separate, well-decoupled analog and digital supply paths wherever the manufacturer architecture permits them. The local bypass network should be placed at the supply pins rather than at the power-entry point, because the codec can convert supply disturbances into audible analog noise. Before selecting capacitors, confirm the required voltage rating, effective capacitance, dielectric behavior, and ESR limits in the manufacturer electrical and application sections.
Treat the SPI clock as a timing-critical signal and verify setup and hold timing against the connected processor at every supported sample rate. Series damping may be appropriate when clock edge rates are high, but its value should be selected from measured edge behavior rather than copied blindly. Confirm the supported master-clock and serial-clock relationships in the manufacturer interface diagrams before laying out the digital connections.
Do not infer an exact replacement from a similar product-family name. The WM8569SEDS/RV, WM8569SEDS/V, and base WM8569 designations require suffix-specific review of package, temperature range, clock configuration, and ordering information. Likewise, do not change external filter or reference-component values without checking the manufacturer circuit because those values can affect noise, stability, and achievable signal-to-noise performance.
Informações de conformidade
The component is a general-purpose audio codec rather than an automotive-qualified device. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation for the exact order code.