WM8569SEDS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic
料号: WM8569SEDS/RV ✓ 量产中WM8569SEDS/RV 概述
An audio codec is a mixed-signal integrated circuit that converts digital audio samples into analog signals and analog sound into digital data. Within the signal-chain hierarchy, a stereo codec belongs to the interface IC and audio-codec class of broader integrated circuits. Its digital interface connects to a host processor, while its analog inputs and outputs provide the physical connection to microphones, line-level equipment, amplifiers, speakers, and audio processing circuits.
The WM8569SEDS/RV supports 24-bit processing at rates up to 192 kSPS. According to the Wolfson Microelectronics manufacturer datasheet, the ADC signal-to-noise ratio is typically 100 dB and the DAC signal-to-noise ratio is typically 103 dB. The codec includes two ADC channels, two DAC channels, stereo volume control, and an SPI-compatible digital interface. These characteristics make it suitable for consumer audio, communications, and embedded audio systems requiring more than basic playback capability.
The device combines high-resolution conversion with integrated level control, reducing the need for separate digital volume-control circuitry. Its 192 kSPS maximum rate supports high-resolution digital audio, while the SPI interface provides a compact connection to microcontrollers, digital signal processors, and application-specific processors. The 5.30 mm-wide 28-pin SSOP also offers a lower-area option than many larger leaded or high-pin-count audio packages.
Typical uses include digital active loudspeakers, personal audio equipment, communications terminals, USB or portable audio systems, and embedded playback platforms. In a typical signal path, digital samples enter through SPI, pass through the DAC and volume-control functions, and leave through the stereo analog outputs. An ADC path can simultaneously capture two analog channels for monitoring, voice processing, or digital capture.
PCB design should preserve analog and digital signal separation, provide short return paths for analog outputs, and place decoupling and input-filter components close to their associated pins. The analog and digital ground strategy, supported passive values, and supported clock configuration should be taken directly from the manufacturer datasheet and reference circuit rather than inferred from generic codec layouts.
This product page combines the manufacturer-level conversion specifications, package information, pricing workflow, drop-in assessment, and practical integration guidance. It also distinguishes genuine replacement options from package-only lookalikes and identifies which board-level decisions still require confirmation from the full datasheet.
直接替换替代料: WM8569SEDS/RV ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: WM8569SEDS/RV (相同外形与封装尺寸) ——差异在于 Maximum Sampling Rate, Package.
WM8569SEDS/V
✅ 直接替换联系询价
查看数据手册 →WM8569SEDS/V
✅ 直接替换联系询价
查看数据手册 →WM8569SEDS/RV 最大额定值与电气特性
| Device Type | Stereo audio codec |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 192 kSPS |
| ADC Channels | 2 channels |
| DAC Channels | 2 channels |
| ADC Signal-to-Noise Ratio | 100 dB typical |
| DAC Signal-to-Noise Ratio | 103 dB typical |
| Digital Audio Interface | SPI |
| Integrated Volume Control | Yes |
| Minimum Operating Temperature | -25 °C |
| Maximum Operating Temperature | 85 °C |
| 封装 | 28-pin SSOP, 5.30 mm wide |
| 安装类型 | Surface mount |
| Packaging Method | Tape and reel |
WM8569SEDS/RV 28-pin ssop, 5.30 mm wide 引脚配置指南
WM8569SEDS/RV(28-pin ssop, 5.30 mm wide 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: WM8569SEDS/RV.
请参阅 数据手册 以查看完整引脚配置。
典型应用
WM8569SEDS/RV 适用于 6 应用s: Digital Active Loudspeakers, USB and Portable Audio, Communications Terminal Audio, Digital Recording and Monitoring, Consumer Audio Equipment, Industrial Audio Control.
Digital Active Loudspeakers
The WM8569SEDS/RV suits digital active-loudspeaker designs that decode audio samples in a host processor and reproduce them through analog power-amplifier stages. Its two DAC channels support a conventional stereo signal path, while the 24-bit conversion capability preserves high-resolution source data up to 192 kSPS. The SPI interface limits the number of host connections and is useful in compact products where board area is constrained. Place the codec close to the analog amplifier inputs, use short output routes, and follow the manufacturer reference network to control distortion and high-frequency behavior.
推荐
USB and Portable Audio
The WM8569SEDS/RV can serve as the analog playback interface in portable or USB-connected audio equipment when a host controller accepts serial audio data. The two 24-bit DACs provide stereo playback, and the maximum 192 kSPS rate supports high-resolution source formats when the complete clock and interface chain supports that rate. Its 5.30 mm-wide SSOP package helps reduce PCB area, although careful grounding remains important when switching digital supply noise reaches the analog output stage.
推荐
Communications Terminal Audio
The WM8569SEDS/RV is applicable to communications terminals that require simultaneous voice capture and playback with one compact stereo codec. Two ADC channels can accept line-level or appropriately conditioned microphone signals, while two DAC channels provide left and right monitoring or playback outputs. The 24-bit, 192 kSPS conversion capability is useful when the surrounding architecture supports high-rate processing. Use the manufacturer analog-input network, low-noise supply arrangement, and recommended grounding scheme to preserve the typical 100 dB ADC signal-to-noise performance.
推荐
Digital Recording and Monitoring
The WM8569SEDS/RV can support two-channel digital recording when analog capture channels feed an embedded processor through the codec's digital interface. Its two ADC channels allow stereo or dual-source monitoring, and its 103 dB typical DAC signal-to-noise ratio provides a clean reference path for immediate playback. The same device can support simultaneous capture and monitoring without adding a separate playback codec, saving board area. Designers should verify supported clock modes, record format, and channel mapping in the manufacturer interface documentation.
推荐
Consumer Audio Equipment
The WM8569SEDS/RV fits consumer audio products requiring both playback and capture from a single stereo codec, including compact stereos and networked entertainment accessories. The integrated volume-control function simplifies signal-level management, while the SPI connection works well with microcontrollers and embedded processors. Its surface-mount 28-pin SSOP package supports automated assembly, and the specified -25 °C to 85 °C operating range covers many indoor commercial environments. Component values and analog filtering should remain consistent with the manufacturer reference design.
推荐
Industrial Audio Control
The WM8569SEDS/RV can be used in industrial audio-control equipment where a controller must monitor incoming analog signals and generate stereo audio prompts or test tones. Its two ADC paths support simultaneous source monitoring, while its DAC outputs can feed an external amplifier or line-level driver. The 24-bit conversion format and 192 kSPS capability provide headroom for professional monitoring tasks, although the selected clock rate should match the processor and downstream signal chain. Industrial temperature qualification beyond the specified range requires a different device.
推荐
推荐产品汇总
工程参考数据: WM8569SEDS/RV ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | WM8569SEDS/V | WM8569 |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 28-pin SSOP, 5.30 mm width | 28-pin SSOP | 28-pin SSOP |
| Device Type | Stereo audio codec | Stereo audio codec | Stereo audio codec |
| Converter Resolution | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kSPS | 192 kSPS | 192 kSPS |
| ADC Channels | 2 channels | 2 channels | 2 channels |
| DAC Channels | 2 channels | 2 channels | 2 channels |
| Digital Audio Interface | SPI | SPI | SPI |
关键差异点
- Combines stereo capture, playback, and volume control (对比 WM8569SEDS/V)
- Supports high-resolution stereo conversion (对比 WM8569)
- Compact surface-mount implementation (对比 WM8569SEDS/V)
设计说明
Place the manufacturer's recommended input, output, reference, and bypass components close to their associated pins. Route analog input and output traces away from the SPI clock line, especially when operating at high sample rates. Use the datasheet reference layout for component placement and keep the analog signal ground return short and controlled to reduce coupling into the 100 dB ADC and 103 dB DAC signal paths.
Use separate, well-decoupled analog and digital supply paths wherever the manufacturer architecture permits them. The local bypass network should be placed at the supply pins rather than at the power-entry point, because the codec can convert supply disturbances into audible analog noise. Before selecting capacitors, confirm the required voltage rating, effective capacitance, dielectric behavior, and ESR limits in the manufacturer electrical and application sections.
Treat the SPI clock as a timing-critical signal and verify setup and hold timing against the connected processor at every supported sample rate. Series damping may be appropriate when clock edge rates are high, but its value should be selected from measured edge behavior rather than copied blindly. Confirm the supported master-clock and serial-clock relationships in the manufacturer interface diagrams before laying out the digital connections.
Do not infer an exact replacement from a similar product-family name. The WM8569SEDS/RV, WM8569SEDS/V, and base WM8569 designations require suffix-specific review of package, temperature range, clock configuration, and ordering information. Likewise, do not change external filter or reference-component values without checking the manufacturer circuit because those values can affect noise, stability, and achievable signal-to-noise performance.
合规信息
The component is a general-purpose audio codec rather than an automotive-qualified device. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation for the exact order code.