XC3S200A-5VQG100C - 4032-LC 770 MHz Spartan-3A FPGA | Xilinx
N.º da peça: XC3S200A-5VQG100C ✗ Fim de vidaXC3S200A-5VQG100C Visão geral
An FPGA is a programmable digital integrated circuit in which logic, interconnections, and embedded block RAM are configured after manufacture. The XC3S200A belongs to the Spartan-3A FPGA family, a cost-sensitive logic platform within the broader FPGA and programmable-logic hierarchy. Unlike fixed-function logic ICs, an FPGA can support protocol bridging, control logic, signal processing, data acquisition, and display-interface functions in one configurable device.
Key resources include 448 logic array blocks, 4,032 logic cells, 200,000 equivalent gates, 294,912 RAM bits, and 68 user I/O. Its -5 speed grade supports operation up to 770 MHz, making it suitable for designs requiring more timing margin than the -4 grade. The 1.2 V core architecture reduces power requirements relative to many earlier programmable-logic families, while the 100-pin surface-mount package supports compact industrial and embedded equipment.
The device uses 90 nm CMOS technology and combines configurable logic blocks with dedicated block RAM and programmable I/O resources. Designers can implement parallel data acquisition, protocol conversion, timing, control, and low-to-moderate-complexity digital signal processing in a single FPGA. Configuration storage is separate from configuration logic, allowing a bitstream to be loaded at power-up or through an external configuration source.
Typical uses include industrial automation, motor and sensor interfaces, communications protocol bridges, embedded display control, data-acquisition systems, and legacy video-processing equipment. The Spartan-3A family is particularly relevant to cost-sensitive, high-volume products where a programmable architecture is needed without moving to a larger or higher-cost FPGA platform.
Before placing the device in a new design, verify every VQG100 pin assignment against the AMD Spartan-3A family data sheet, including dedicated configuration, clock, power, and I/O pins. Existing XC3S200A-5VQG100C designs should also confirm bitstream compatibility, termination, decoupling, and signal-integrity requirements before any alternate source or grade is substituted.
This page combines device specifications, package information, lifecycle status, replacement analysis, application guidance, and practical design considerations to support legacy Spartan-3A maintenance and controlled redesign planning.
Alternativas drop-in para XC3S200A-5VQG100C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC3S200A-5VQG100C (mesmo formato e footprint) — diferindo em Core Supply Voltage, Logic Cells, Process Technology, Speed Grade, Device Type.
XC3S200A-4VQG100C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S200A-4VQG100I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S200-5VQG100C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S200-4VQG100C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC3S200A-5VQG100C Classificações máximas e características elétricas
| FPGA Family | Spartan-3A |
| Logic Cells | 4,032 cells |
| Equivalent Logic Gates | 200,000 gates |
| Logic Array Blocks | 448 LABs |
| Block RAM | 294,912 bits |
| User I/O Pins | 68 I/O |
| Maximum Frequency | 770 MHz |
| Speed Grade | -5 |
| Core Supply Voltage | 1.2 V nominal |
| Supply Voltage Range | 1.14 V to 1.26 V |
| Process Technology | 90 nm CMOS |
| Encapsulamento | 100-pin VTQFP, 14 mm x 14 mm |
| Tipo de montagem | Surface mount |
| Temperatura de operação | 0°C to 85°C |
| Device Pin Count | 100 pins |
| Lead-Free Construction | Lead free |
Guia de Configuração de Pinos do XC3S200A-5VQG100C 100-pin vtqfp, 14 mm x 14 mm
Configuração de pinos para XC3S200A-5VQG100C (pacote 100-pin vtqfp, 14 mm x 14 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC3S200A-5VQG100C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC3S200A-5VQG100C é adequado para 6 aplicaçãos: Industrial Automation and Motor Control, Sensor Acquisition and Signal Conditioning, Communications Protocol Bridging, Data Acquisition and Test Equipment, Display and Interface Control, Embedded Video and Signal Processing.
Industrial Automation and Motor Control
The XC3S200A-5VQG100C fits compact industrial controllers that coordinate sensors, actuators, interlocks, and sequencing logic. Its 4,032 logic cells and 68 user I/O provide room for parallel control paths, while 294,912 RAM bits can support packet buffers, counters, and diagnostic histories. The 770 MHz -5 speed grade offers useful timing margin for synchronous acquisition and control loops. Place the FPGA beside the power stage, route I/O according to the VQG100 pin table, and verify termination levels against every connected sensor and actuator.
Recomendado
Sensor Acquisition and Signal Conditioning
The XC3S200A-5VQG100C can implement parallel sensor acquisition, digital filtering, thresholding, calibration tables, and data packing. Its 68 user I/O supports multiple digital channels, while embedded block RAM supports local buffering and reduces traffic to an external processor. A -5 grade can evaluate time-critical sampling logic at up to 770 MHz, subject to actual timing closure and I/O timing constraints. Synchronize each input bank correctly and place termination or level-shifting components where the connected sensor voltage differs from the FPGA I/O requirements.
Recomendado
Communications Protocol Bridging
The XC3S200A-5VQG100C is suitable for legacy communications equipment that must translate between serial, parallel, or fieldbus-related interfaces. Its programmable logic fabric can perform framing, byte alignment, filtering, FIFO management, and protocol conversion, while 294,912 RAM bits provide receive and transmit buffering. The 100-pin VTQFP keeps the implementation compact, and the 770 MHz rating can support demanding clocked datapaths. Validate protocol timing with worst-case packet traffic and confirm that the selected I/O standards match each physical interface.
Recomendado
Data Acquisition and Test Equipment
The XC3S200A-5VQG100C can serve as the central programmable logic device in a compact data-acquisition instrument. It can coordinate multiple converters, implement time-base division, route captured data into RAM, and reduce the load on an embedded processor. The available 4,032 logic cells and 68 I/O suit medium-channel systems, while the 770 MHz maximum frequency supports pipelined processing. Place the FPGA close to the converter interfaces, use separate analog and digital ground strategies, and verify acquisition timing against the converter latency specifications.
Recomendado
Display and Interface Control
The XC3S200A-5VQG100C can implement timing generators, raster logic, character rendering, touch-interface scanning, and legacy display adapters. The 68 user I/O provide sufficient parallel connectivity for many compact display interfaces, and block RAM can hold lookup tables, character patterns, or frame-line buffers. The -5 speed grade provides additional timing margin over the -4 variant when the design uses wide parallel buses. Verify the panel's voltage, signal polarity, refresh timing, and connector pinout before finalizing the PCB.
Recomendado
Embedded Video and Signal Processing
The XC3S200A-5VQG100C remains applicable to legacy video boards requiring stream conversion, timing generation, pixel alignment, filtering, or overlay logic. Its parallel logic fabric supports clocked datapaths, and its 294,912 RAM bits can implement line buffers or compact frame stores. The 770 MHz -5 rating provides more timing margin than the -4 grade for pixel-clock processing. Because device configuration and video standards are design-specific, engineers should validate the existing bitstream, memory interface, clocking scheme, and I/O timing rather than assuming a Spartan-3A replacement is functionally identical.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC3S200A-5VQG100C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC3S200A-4VQG100C | XC3S200A-4VQG100I | XC3S200-5VQG100C | XC3S200-4VQG100C |
|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 100-pin VTQFP (VQG100) | 100-pin VTQFP (VQG100) | 100-pin VTQFP (VQG100) | 100-pin VTQFP (VQG100) | 100-pin VTQFP (VQG100) |
| FPGA Family | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3 | Spartan-3 |
| Speed Grade | -5 | -4 | -4 | -5 | -4 |
| Core Supply Voltage | 1.2 V nominal; 1.14 V to 1.26 V operating range | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Principais diferenciais
- Higher speed rating within the same Spartan-3A family (vs XC3S200A-4VQG100C)
- Newer Spartan-3A resource architecture (vs XC3S200-5VQG100C)
- Maximum speed grade for the identified VQG100 family options (vs XC3S200-4VQG100C)
Notas de projeto
Follow the AMD DS529 power-supply guidance for the VQG100 package, including connection of every core and ground terminal. Place high-frequency bypass capacitors close to their associated package pins and keep the 1.2 V rail away from switching-node return currents. Verify the design with an appropriate power-distribution network because transient load current and supply inductance can create local VDD disturbance even when the laboratory supply reads 1.2 V.
Use the official VQG100 pin table when assigning configuration pins, clock inputs, user I/O, power, and ground. Keep sensitive configuration and clock traces short, provide the required pull-up or pull-down values, and avoid routing high-speed clocks beside unprotected inputs. PCB trace length and topology should be reviewed against the selected I/O standard, especially for source-synchronous interfaces and externally clocked buses.
Do not treat a package-compatible alternative as automatically bitstream-compatible. The -4 Spartan-3A grade has a lower 667 MHz rating, while an original Spartan-3 device has a different resource architecture and 4,320 logic cells. Before substitution, recompile with the alternate device selected, review timing and utilization reports, confirm configuration pins, and perform hardware testing with the intended peripheral interfaces.
Informações de conformidade
The component listing identifies the device as lead free. RoHS, REACH, halogen-free, and conflict-minerals statuses were not explicitly established.