최종 구매 공지: XC3S200A-5VQG100C 단종에 가까워지고 있습니다. 최종 주문일: 문의하기. 사용 가능한 대체 부품 보기 →
Xilinx

XC3S200A-5VQG100C - 4032-LC 770 MHz Spartan-3A FPGA | Xilinx

부품 번호: XC3S200A-5VQG100C ✗ 단종
1.2 V nominal Vdss 100-pin VTQFP, 14 mm x 14 mm Package 770 MHz Speed
MOQ: 1 |

XC3S200A-5VQG100C 개요

The Xilinx XC3S200A-5VQG100C is a Spartan-3A field-programmable gate array with 4,032 logic cells, 200,000 equivalent logic gates, 294,912 RAM bits, 68 user I/O pins, and a maximum frequency of 770 MHz, housed in a 100-pin VTQFP package. The device operates from a 1.14 V to 1.26 V core-supply range and is specified for 0°C to 85°C ambient operation.

An FPGA is a programmable digital integrated circuit in which logic, interconnections, and embedded block RAM are configured after manufacture. The XC3S200A belongs to the Spartan-3A FPGA family, a cost-sensitive logic platform within the broader FPGA and programmable-logic hierarchy. Unlike fixed-function logic ICs, an FPGA can support protocol bridging, control logic, signal processing, data acquisition, and display-interface functions in one configurable device.

Key resources include 448 logic array blocks, 4,032 logic cells, 200,000 equivalent gates, 294,912 RAM bits, and 68 user I/O. Its -5 speed grade supports operation up to 770 MHz, making it suitable for designs requiring more timing margin than the -4 grade. The 1.2 V core architecture reduces power requirements relative to many earlier programmable-logic families, while the 100-pin surface-mount package supports compact industrial and embedded equipment.

The device uses 90 nm CMOS technology and combines configurable logic blocks with dedicated block RAM and programmable I/O resources. Designers can implement parallel data acquisition, protocol conversion, timing, control, and low-to-moderate-complexity digital signal processing in a single FPGA. Configuration storage is separate from configuration logic, allowing a bitstream to be loaded at power-up or through an external configuration source.

Typical uses include industrial automation, motor and sensor interfaces, communications protocol bridges, embedded display control, data-acquisition systems, and legacy video-processing equipment. The Spartan-3A family is particularly relevant to cost-sensitive, high-volume products where a programmable architecture is needed without moving to a larger or higher-cost FPGA platform.

Before placing the device in a new design, verify every VQG100 pin assignment against the AMD Spartan-3A family data sheet, including dedicated configuration, clock, power, and I/O pins. Existing XC3S200A-5VQG100C designs should also confirm bitstream compatibility, termination, decoupling, and signal-integrity requirements before any alternate source or grade is substituted.

This page combines device specifications, package information, lifecycle status, replacement analysis, application guidance, and practical design considerations to support legacy Spartan-3A maintenance and controlled redesign planning.

드롭인 대체품: XC3S200A-5VQG100C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC3S200A-5VQG100C (동일 폼 팩터 및 풋프린트) — 차이점: Core Supply Voltage, Logic Cells, Process Technology, Speed Grade, Device Type.

AMD
Core Supply Voltage: 1.2 V
Logic Cells: 4,320 cells
Process Technology: 90 nm
비교 대상: XC3S200A-5VQG100C →
Xilinx
Core Supply Voltage: 1.2 V
Process Technology: 90 nm
Speed Grade: -4
비교 대상: XC3S200A-5VQG100C →

XC3S200A-4VQG100C

✅ 드롭인
📦 100-pin VTQFP (VQG100)
Maximum frequency is 667 MHz versus 770 MHz, approximately 13% lower; Spartan-3A resources and VQG100 footprint are retained

📋 참조 대체품 (카탈로그에 없음)

XC3S200A-4VQG100I

✅ 드롭인
📦 100-pin VTQFP (VQG100)
Uses the -4 speed grade rated at 667 MHz rather than 770 MHz, approximately 13% lower; package remains VQG100

📋 참조 대체품 (카탈로그에 없음)

XC3S200-5VQG100C

✅ 드롭인
📦 100-pin VTQFP (VQG100)
Original Spartan-3 architecture with 4,320 cells and 725 MHz versus 4,032 cells and 770 MHz; cell count is 288 higher and frequency is 45 MHz lower

📋 참조 대체품 (카탈로그에 없음)

XC3S200-4VQG100C

✅ 드롭인
AMD
📦 100-pin VTQFP (VQG100)
FPGA · Spartan-3 · 200,000 gates · 221,184 gates · 4,320 cells · 63 I/Os · 630 MHz · 1.2 V

가격 문의

데이터시트 보기 →

XC3S200A-5VQG100C 최대 정격 & 전기적 특성

FPGA Family Spartan-3A
Logic Cells 4,032 cells
Equivalent Logic Gates 200,000 gates
Logic Array Blocks 448 LABs
Block RAM 294,912 bits
User I/O Pins 68 I/O
Maximum Frequency 770 MHz
Speed Grade -5
Core Supply Voltage 1.2 V nominal
Supply Voltage Range 1.14 V to 1.26 V
Process Technology 90 nm CMOS
패키지 100-pin VTQFP, 14 mm x 14 mm
실장 유형 Surface mount
동작 온도 0°C to 85°C
Device Pin Count 100 pins
Lead-Free Construction Lead free

XC3S200A-5VQG100C 100-pin vtqfp, 14 mm x 14 mm 핀 구성 가이드

XC3S200A-5VQG100C(100-pin vtqfp, 14 mm x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC3S200A-5VQG100C의 100-pin vtqfp, 14 mm x 14 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC3S200A-5VQG100C.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC3S200A-5VQG100C 적합 용도: 6 애플리케이션s: Industrial Automation and Motor Control, Sensor Acquisition and Signal Conditioning, Communications Protocol Bridging, Data Acquisition and Test Equipment, Display and Interface Control, Embedded Video and Signal Processing.

🏭

Industrial Automation and Motor Control

The XC3S200A-5VQG100C fits compact industrial controllers that coordinate sensors, actuators, interlocks, and sequencing logic. Its 4,032 logic cells and 68 user I/O provide room for parallel control paths, while 294,912 RAM bits can support packet buffers, counters, and diagnostic histories. The 770 MHz -5 speed grade offers useful timing margin for synchronous acquisition and control loops. Place the FPGA beside the power stage, route I/O according to the VQG100 pin table, and verify termination levels against every connected sensor and actuator.

🧩

Sensor Acquisition and Signal Conditioning

The XC3S200A-5VQG100C can implement parallel sensor acquisition, digital filtering, thresholding, calibration tables, and data packing. Its 68 user I/O supports multiple digital channels, while embedded block RAM supports local buffering and reduces traffic to an external processor. A -5 grade can evaluate time-critical sampling logic at up to 770 MHz, subject to actual timing closure and I/O timing constraints. Synchronize each input bank correctly and place termination or level-shifting components where the connected sensor voltage differs from the FPGA I/O requirements.

🌐

Communications Protocol Bridging

The XC3S200A-5VQG100C is suitable for legacy communications equipment that must translate between serial, parallel, or fieldbus-related interfaces. Its programmable logic fabric can perform framing, byte alignment, filtering, FIFO management, and protocol conversion, while 294,912 RAM bits provide receive and transmit buffering. The 100-pin VTQFP keeps the implementation compact, and the 770 MHz rating can support demanding clocked datapaths. Validate protocol timing with worst-case packet traffic and confirm that the selected I/O standards match each physical interface.

⚡

Data Acquisition and Test Equipment

The XC3S200A-5VQG100C can serve as the central programmable logic device in a compact data-acquisition instrument. It can coordinate multiple converters, implement time-base division, route captured data into RAM, and reduce the load on an embedded processor. The available 4,032 logic cells and 68 I/O suit medium-channel systems, while the 770 MHz maximum frequency supports pipelined processing. Place the FPGA close to the converter interfaces, use separate analog and digital ground strategies, and verify acquisition timing against the converter latency specifications.

📺

Display and Interface Control

The XC3S200A-5VQG100C can implement timing generators, raster logic, character rendering, touch-interface scanning, and legacy display adapters. The 68 user I/O provide sufficient parallel connectivity for many compact display interfaces, and block RAM can hold lookup tables, character patterns, or frame-line buffers. The -5 speed grade provides additional timing margin over the -4 variant when the design uses wide parallel buses. Verify the panel's voltage, signal polarity, refresh timing, and connector pinout before finalizing the PCB.

🎥

Embedded Video and Signal Processing

The XC3S200A-5VQG100C remains applicable to legacy video boards requiring stream conversion, timing generation, pixel alignment, filtering, or overlay logic. Its parallel logic fabric supports clocked datapaths, and its 294,912 RAM bits can implement line buffers or compact frame stores. The 770 MHz -5 rating provides more timing margin than the -4 grade for pixel-clock processing. Because device configuration and video standards are design-specific, engineers should validate the existing bitstream, memory interface, clocking scheme, and I/O timing rather than assuming a Spartan-3A replacement is functionally identical.

Where can I download the XC3S200A-5VQG100C datasheet PDF?
The official AMD document for the XC3S200A-5VQG100C is the Spartan-3A FPGA Family Data Sheet, DS529, available through the AMD documentation link on this page. It contains the family overview, electrical specifications, package information, and pinout tables for VQG100 devices. Use the manufacturer document rather than an unrevised third-party copy when assigning pins, planning power rails, or checking configuration requirements.
What are the key specifications of XC3S200A-5VQG100C that engineers should know?
The XC3S200A-5VQG100C provides 4,032 logic cells, 200,000 equivalent gates, 294,912 RAM bits, 68 user I/O pins, and a maximum frequency of 770 MHz. It uses a 1.2 V nominal core supply with a 1.14 V to 1.26 V operating range and is packaged in a 100-pin VTQFP. According to the AMD Spartan-3A FPGA Family Data Sheet DS529, these figures define the device's principal capacity, speed, and implementation constraints.
Where can I find the XC3S200A-5VQG100C pinout?
The XC3S200A-5VQG100C pinout is published in the AMD Spartan-3A FPGA Family Data Sheet DS529. Consult the VQG100 package pin table and its referenced user-guide material before routing PCB signals. The package contains 100 terminals, including power, configuration, clock, and user I/O functions, so a generic 100-pin symbol is not a substitute for the manufacturer assignment table.
What is the XC3S200A-5VQG100C used for?
The XC3S200A-5VQG100C is used for programmable digital control, protocol conversion, data acquisition, signal processing, and embedded interface logic. Its 4,032 logic cells and 294,912 RAM bits suit cost-sensitive systems that need configurable parallel logic without using a larger FPGA. Common deployments include industrial control, communications interfaces, sensor conditioning, display control, and legacy video-processing boards.
Is XC3S200A-5VQG100C still active?
The XC3S200A-5VQG100C is discontinued and remains a legacy component for maintenance and redesign work. Its Spartan-3A family has an established tool flow and an extensive installed base, so existing products can continue using the device when appropriate. For new volume designs, request lifecycle and sourcing guidance through the Request a Quote form on this page before freezing the BOM.
What is the difference between XC3S200A-5VQG100C and XC3S200A-4VQG100C?
The primary difference is speed grade: the XC3S200A-5VQG100C reaches 770 MHz, while the XC3S200A-4VQG100C is listed at 667 MHz. Both devices use the Spartan-3A family and the 100-pin VQG100 package. The -5 grade provides approximately 15% more timing performance, making it preferable where critical paths cannot close at the lower speed rating.
What is the difference between XC3S200A-5VQG100C and XC3S200-5VQG100C?
The XC3S200A-5VQG100C belongs to the Spartan-3A family and has 4,032 logic cells with a listed maximum frequency of 770 MHz. The XC3S200-5VQG100C belongs to the original Spartan-3 family and is listed with 4,320 cells and 725 MHz. Although both use a 100-pin VTQFP package, they are not automatically interchangeable because the families differ in resources and architecture.
What is the best drop-in replacement for XC3S200A-5VQG100C?
The closest speed-grade drop-in option is the XC3S200A-4VQG100C because it retains the Spartan-3A architecture and VQG100 footprint, but its 667 MHz rating is about 13% below the -5 grade. The XC3S200A-4VQG100I is another same-footprint family variant with an industrial temperature suffix. Confirm timing closure, I/O standards, configuration behavior, and bitstream compatibility before replacement.
Can XC3S200A-4VQG100C replace XC3S200A-5VQG100C?
The XC3S200A-4VQG100C can serve as a physical drop-in candidate because it uses the same 100-pin VQG100 package, but it is a lower speed grade. Its listed 667 MHz maximum is 103 MHz below the target's 770 MHz. A replacement is appropriate only if the revised design closes timing at the -4 grade and its configuration, power, and I/O requirements remain unchanged.
When should I choose XC3S200A-5VQG100C over XC3S200-5VQG100C?
Choose the XC3S200A-5VQG100C when maintaining a Spartan-3A design or using a known Spartan-3A bitstream and resource mapping. It offers a listed 770 MHz maximum frequency and 4,032 logic cells, compared with 725 MHz and 4,320 cells for the XC3S200-5VQG100C. Choose the original Spartan-3 only when an existing validated design specifically requires that architecture.
Is XC3S200A-5VQG100C suitable for industrial control systems?
The XC3S200A-5VQG100C is suitable for industrial control tasks requiring programmable logic, I/O, and block RAM within its 0°C to 85°C rating. It can implement motor sequencing, sensor interfaces, protocol conversion, and supervisory logic. For installations with wider ambient requirements, verify an industrial-temperature grade and apply the appropriate environmental protection rather than assuming the commercial part is sufficient.
What is the power supply requirement for XC3S200A-5VQG100C?
The XC3S200A-5VQG100C uses a nominal 1.2 V core supply with a stated operating range of 1.14 V to 1.26 V. Its VQG100 package also includes dedicated power and ground pins that must be connected according to the AMD package data. Use the DS529 power-supply and decoupling guidance for rail topology, bypass placement, and startup sequencing.
Where can I buy XC3S200A-5VQG100C and what is the current price?
The XC3S200A-5VQG100C is a discontinued legacy FPGA, so availability and commercial terms can vary by lot and sourcing channel. Use the Request a Quote form on this page to request the current unit quotation, minimum order quantity, stock status, and lead time. The form allows the request to be evaluated against the exact MPN and its 100-pin package configuration.
What is the lead time and stock status for XC3S200A-5VQG100C?
Current stock and lead time for the XC3S200A-5VQG100C should be confirmed for the requested quantity rather than inferred from historical catalog listings. Submit the exact MPN through the Request a Quote form on this page and request lot traceability, delivery timing, and lifecycle status. This is particularly important for obsolete or long-lead-time programmable-logic devices.
What can replace XC3S200A-5VQG100C?
The most direct same-package candidates are the XC3S200A-4VQG100C and XC3S200A-4VQG100I, both using the VQG100 footprint but carrying a lower speed rating. The XC3S200-5VQG100C and XC3S200-4VQG100C are also package-matched Spartan options. None should be fitted without checking timing, pin functions, configuration compatibility, and existing bitstream behavior.

엔지니어링 참조 데이터: XC3S200A-5VQG100C — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the XC3S200A-5VQG100C when maintaining an existing Spartan-3A VQG100 design that needs the highest identified -5 speed grade. It provides 4,032 logic cells, 294,912 RAM bits, 68 user I/O, and a listed 770 MHz maximum frequency. Select the XC3S200A-4VQG100C only when the revised timing closes at 667 MHz and the lower speed rating has no design impact. Consider the XC3S200A-4VQG100I for the same package and lower speed grade when its industrial-temperature designation matches the product requirements. The original Spartan-3 alternatives use the same VQG100 outline but have a different architecture, so they should be selected only after recompilation and validation confirm bitstream, resource, and timing compatibility.

대체품과의 비교

파라미터 이 제품 XC3S200A-4VQG100C XC3S200A-4VQG100I XC3S200-5VQG100C XC3S200-4VQG100C
Brand Xilinx Xilinx Xilinx Xilinx Xilinx
Package 100-pin VTQFP (VQG100) 100-pin VTQFP (VQG100) 100-pin VTQFP (VQG100) 100-pin VTQFP (VQG100) 100-pin VTQFP (VQG100)
FPGA Family Spartan-3A Spartan-3A Spartan-3A Spartan-3 Spartan-3
Speed Grade -5 -4 -4 -5 -4
Core Supply Voltage 1.2 V nominal; 1.14 V to 1.26 V operating range 1.2 V nominal 1.2 V nominal 1.2 V nominal 1.2 V nominal
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS

주요 차별점

  • Higher speed rating within the same Spartan-3A family (vs XC3S200A-4VQG100C)
  • Newer Spartan-3A resource architecture (vs XC3S200-5VQG100C)
  • Maximum speed grade for the identified VQG100 family options (vs XC3S200-4VQG100C)

설계 노트

Follow the AMD DS529 power-supply guidance for the VQG100 package, including connection of every core and ground terminal. Place high-frequency bypass capacitors close to their associated package pins and keep the 1.2 V rail away from switching-node return currents. Verify the design with an appropriate power-distribution network because transient load current and supply inductance can create local VDD disturbance even when the laboratory supply reads 1.2 V.

Use the official VQG100 pin table when assigning configuration pins, clock inputs, user I/O, power, and ground. Keep sensitive configuration and clock traces short, provide the required pull-up or pull-down values, and avoid routing high-speed clocks beside unprotected inputs. PCB trace length and topology should be reviewed against the selected I/O standard, especially for source-synchronous interfaces and externally clocked buses.

Do not treat a package-compatible alternative as automatically bitstream-compatible. The -4 Spartan-3A grade has a lower 667 MHz rating, while an original Spartan-3 device has a different resource architecture and 4,320 logic cells. Before substitution, recompile with the alternate device selected, review timing and utilization reports, confirm configuration pins, and perform hardware testing with the intended peripheral interfaces.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The component listing identifies the device as lead free. RoHS, REACH, halogen-free, and conflict-minerals statuses were not explicitly established.

관련 검색

xc3s200a 4vqg100c xc3s200a 4vqg100i xc3s200a datasheet spartan xc3s200a xilinx xc3s200a XC3S200A-5VQG100C datasheet pdf XC3S200A-5VQG100C pinout XC3S200A-5VQG100C equivalent XC3S200A-5VQG100C replacement XC3S200A-5VQG100C vs XC3S200A-4VQG100C XC3S200A VQG100 application circuit XC3S200A price

관련 부품 & 용어

Xilinx AMD XC3S200A-5VQG100C XC3S200A-4VQG100C XC3S200A-4VQG100I XC3S200-5VQG100C XC3S200-4VQG100C Spartan-3A Spartan-3 FPGA field-programmable gate array programmable logic logic cell logic array block block RAM user I/O configuration logic 770 MHz 1.2 V core supply 90 nm CMOS VTQFP-100 TQFP family surface-mount package industrial automation protocol bridging
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기