XC3S400A-5FTG256C - 8064-Cell Spartan-3A FPGA | AMD
N.º da peça: XC3S400A-5FTG256C ✗ Fim de vidaXC3S400A-5FTG256C Visão geral
An FPGA is a programmable digital integrated circuit that combines configurable logic blocks, programmable interconnect, and input/output blocks in a single semiconductor device. Its internal fabric can be configured by a design tool to implement counters, state machines, interfaces, processors, signal-processing pipelines, or complete embedded systems. The XC3S400A belongs to the Spartan-3A family, which is positioned for high-volume, cost-sensitive, I/O-intensive equipment.
Key device characteristics include 896 logic-related LAB or CLB resources, 195 user I/O, 368640 bits of embedded block RAM, and a 1.14 V to 1.26 V operating supply range. The 256-LBGA package supports dense board layouts and high pin counts compared with smaller plastic packages. The commercial temperature grade is specified for 0°C to 85°C junction temperature operation, so the design must maintain adequate margin across the complete system temperature range.
The Spartan-3A architecture uses configurable logic, dedicated block RAM resources, dedicated multipliers, and programmable I/O blocks. This combination allows parallel data processing without the recurring unit cost of a mask change on a custom ASIC. Device configuration and timing closure remain design-engineering responsibilities, and the selected I/O standards must be compatible with the target board voltage and external devices.
Typical applications include industrial control and data acquisition, embedded communications equipment, video and image-processing subsystems, instrumentation interfaces, and compact control logic. The 195 I/O count is useful for designs that need numerous parallel digital connections, while the 368640 RAM bits support packet buffering, data capture, or modest-width memories.
For PCB layout, follow the AMD Spartan-3A package pinout and power-decoupling recommendations, including the requirements for each supply rail. Check the selected I/O standard against the board’s signal levels and confirm the -5 speed grade against the timing requirements of the selected clock rate. Validate the design with the appropriate AMD FPGA implementation and timing tools.
This page combines the device specifications, qualified drop-in alternatives, comparison parameters, and practical design guidance to accelerate component selection, footprint review, and legacy Spartan-3A design maintenance.
Alternativas drop-in para XC3S400A-5FTG256C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC3S400A-5FTG256C (mesmo formato e footprint) — diferindo em Logic Cells, Manufacturer, Mounting Type, Operating Temperature, Package.
XC3S400A-4FTG256C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC3S400A-4FTG256I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S400AN-4FTG256I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S400AN-4FT256I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S400A-5FTG256C Classificações máximas e características elétricas
| Device Type | Spartan-3A Field Programmable Gate Array (FPGA) |
| Logic Cells | 8064 cells |
| System Gates | 400000 gates |
| Embedded RAM | 368640 bits |
| User I/O | 195 I/O |
| Logic Resources | 896 LABs/CLBs |
| Tensão de alimentação de operação | 1.14 V to 1.26 V |
| Temperatura de operação | 0°C to 85°C (TJ) |
| Encapsulamento | 256-LBGA |
| Tipo de montagem | SMD |
| Series | Spartan-3A |
| Speed Grade | -5 |
| Temperature Grade | Commercial |
| Manufacturer | AMD / Xilinx |
| Categoria | FPGA |
| Programmable Interface | FPGA configuration and programmable I/O |
Guia de Configuração de Pinos do XC3S400A-5FTG256C 256-lbga
Configuração de pinos para XC3S400A-5FTG256C (pacote 256-lbga). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC3S400A-5FTG256C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC3S400A-5FTG256C é adequado para 6 aplicaçãos: Industrial Control and Automation, Data Acquisition and Instrumentation, Embedded Communications Equipment, Video and Image Processing Pipelines, Programmable Logic and Test Equipment, Compact General-Purpose Control Platform.
Industrial Control and Automation
The XC3S400A-5FTG256C fits centralized machine-control logic where a controller must combine many discrete signals with deterministic internal processing. Its 195 user I/O provide substantial parallel connectivity for encoders, limit switches, solenoid controls, and digital sensor banks, while 8064 logic cells can implement sequencing logic and communication state machines. The 368640 RAM bits support local buffering of sampled process data. Place the device in an industrial enclosure with conservative thermal design so its 0°C to 85°C junction-temperature limit is maintained. Use the AMD Spartan-3A implementation flow for timing closure and verify all external interface levels against the selected I/O standards.
Recomendado
Data Acquisition and Instrumentation
The XC3S400A-5FTG256C is appropriate for parallel data-acquisition front ends that must align samples, buffer bursts, and transfer processed results. Its 195 user I/O can accept multiple sensor outputs, clocks, and control signals, while the 368640 RAM bits provide useful packet and trace buffering. The 8064-cell fabric can implement parallel-to-serial conversion, filtering stages, or trigger logic without relying on a separate fixed-function processor. Timing-sensitive acquisition paths require disciplined clock planning and I/O registration. Confirm analog front-end settling separately, because the FPGA handles digital conversion and control but does not replace input amplifiers, protection, or reference design.
Recomendado
Embedded Communications Equipment
The XC3S400A-5FTG256C can implement protocol conversion, packet framing, buffering, and interface bridging in cost-sensitive communications hardware. Its 368640 RAM bits allow multiple receive and transmit queues, and the 195 I/O support parallel PHY connections and control signals. The device is useful when fixed logic is insufficient but a high-speed processor plus external memory would increase system complexity. Keep high-speed routing short, provide continuous clocking with clean power, and use the manufacturer’s I/O guidance to avoid overshoot and data-integrity problems. Configuration storage should be reviewed carefully because the Spartan-3A requires a valid bitstream after each power cycle.
Recomendado
Video and Image Processing Pipelines
The XC3S400A-5FTG256C supports parallel pixel pipelines, color processing, and timing correction where a configurable fabric is preferable to a fixed function. Its 8064 logic cells can implement several processing stages in parallel, and 368640 RAM bits can support line buffers or compact frame storage depending on resolution and pixel format. The 195 I/O count offers ample parallel access to image sensors, memory interfaces, and display timing signals. Use dedicated clock-capable pins for the primary clock, constrain video timing precisely, and validate the selected I/O standard against the external sensor and panel. Power and thermal performance depend heavily on logic utilization and switching activity.
Recomendado
Programmable Logic and Test Equipment
The XC3S400A-5FTG256C is useful as the central programmable engine in bench instruments, interface testers, and legacy automated-test equipment. Its 8064 cells and 195 I/O can implement stimulus generation, response capture, sequencing, and communication adapters within one device. Dedicated block RAM can hold captured waveforms or test vectors, reducing the external component count. Because the -5 speed grade supports the higher of the two closely related -4/-5 choices, use it when a timing-critical legacy design has little margin. Maintain deterministic clocking, isolate analog instrumentation from digital switching, and program the FPGA through a reliable boot configuration path.
Recomendado
Compact General-Purpose Control Platform
The XC3S400A-5FTG256C can consolidate timers, counters, state machines, and interface glue into a single controller for compact industrial or medical-instrument equipment. The 195 I/O reduce the need for external glue logic, while the embedded RAM supports event histories and protocol buffers. Its low supply voltage and 256-ball package enable compact board construction when a high pin count is needed. Validate medical or safety-critical designs for the required quality and regulatory process, since the commercial-grade suffix and family lifecycle status affect sourcing strategy. For new products, compare the design against currently supported AMD devices to reduce long-term maintenance risk.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC3S400A-5FTG256C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC3S400A-4FTG256C | XC3S400A-4FTG256I | XC3S400AN-4FTG256I | XC3S400AN-4FT256I |
|---|---|---|---|---|---|
| Package | 256-FTBGA | 256-FTBGA - same | 256-FTBGA - same | 256-FTBGA - same | 256-FTBGA - same |
| Brand | AMD | AMD | AMD | AMD | AMD |
| Speed Grade | -5 | -4 | -4 | -4 | -4 |
| Temperature Grade | Commercial, 0°C to 85°C (TJ) | Commercial | Industrial | Industrial | Industrial |
| Logic Cells | 8064 | 8064 | 8064 | 8064 | 8064 |
| Embedded RAM | 368640 bits | 368640 bits | 368640 bits | 368640 bits | 368640 bits |
| User I/O | 195 | 195 | 195 | 195 | 195 |
| Configuration Memory | Volatile, external bitstream loading | Volatile, external bitstream loading | Volatile, external bitstream loading | Non-volatile embedded configuration memory | Non-volatile embedded configuration memory |
| Family | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3AN | Spartan-3AN |
Principais diferenciais
- Higher speed grade than the principal drop-in alternatives (vs XC3S400A-4FTG256C)
- Commercial-grade configuration without industrial-temperature extension (vs XC3S400A-4FTG256I)
- Spartan-3A volatile configuration retains existing design flow (vs XC3S400AN-4FTG256I)
Notas de projeto
Do not treat the FTG256 package as a universal 256-I/O device: the XC3S400A provides 195 user I/O, and several balls serve power, configuration, clock, or other dedicated functions. Compare the exact FTG256 ball map against the alternative device before authorizing a substitution. The Spartan-3AN options also change configuration behavior, so a board-level pin match does not by itself prove functional equivalence. Review configuration pins, JTAG behavior, power-up states, and the external boot circuit.
Use the AMD Spartan-3A DS529 package drawing and device-specific pinout for the FTG256 land pattern and escape routing. Place decoupling capacitors close to their assigned supply balls, keep the configuration interface away from noisy analog or switching nodes, and route dedicated clock-capable pins according to the manufacturer’s guidance. Because the BGA has fine pitch and high pin count, verify pad and mask definitions during PCB release. Run post-layout timing and signal-integrity checks with the actual board constraints.
Estimate dissipation from the implemented design rather than assuming the device consumes a fixed amount. Logic utilization, clock frequency, I/O activity, and the output standard all influence dynamic current and junction temperature. Start with the AMD power-estimation and thermal tools, then add board-level derating for the actual ambient temperature and airflow. Because the commercial suffix limits junction temperature to 85°C, calculate worst-case temperature rise before selecting a replacement with a different temperature grade.
A -5 to -4 speed-grade change can turn a previously closed design into a timing failure even though the logic cells, RAM, and package match. Rebuild the bitstream for the alternate device, re-run static timing analysis at the applicable clock and I/O constraints, and inspect setup and hold slack before substitution. Also review margin for I/O timing under load. A passing synthesis result alone is not evidence that the -4 device is functionally interchangeable at the system clock.
Informações de conformidade
The commercial Spartan-3A device is not identified as an AEC-Q100 automotive-qualified option. Compliance declarations for RoHS, REACH, lead-free status, halogen-free status, and conflict minerals are unknown from the manufacturer document and product listings reviewed.