Xilinx

XC3S700A-4FG400C 700K FPGA, 311 I/O, 400-BGA | Xilinx

N.º da peça: XC3S700A-4FG400C ✗ Fim de vida
1.14 V to 1.26 V Vdss S-PBGA-B400, 400 balls Package 667 MHz Speed
MOQ: 1 |

XC3S700A-4FG400C Visão geral

The Xilinx XC3S700A-4FG400C is a Spartan-3A field-programmable gate array with approximately 700,000 system gates, 13,248 configurable logic cells, 311 I/O sites, and a 400-ball S-PBGA package measuring 21 mm by 21 mm. It operates from a 1.14 V minimum supply to a 1.26 V maximum supply, with a -4 speed grade and a commercial temperature range of 0°C to 85°C.

An FPGA is a semiconductor whose digital logic, interconnect, and I/O can be configured after manufacture. Within the product hierarchy, the XC3S700A-4FG400C is a programmable logic device, then an FPGA, then a general-purpose semiconductor used for parallel processing, control, interface bridging, and embedded signal processing. The Spartan-3A family targets cost-sensitive applications requiring more capability than small CPLDs while avoiding the resource level of the largest FPGAs.

Key features include approximately 700,000 system gates, 13,248 logic cells, 311 I/O, and up to 45 KB of block RAM according to the family datasheet information. The device is manufactured using a 90 nm process and uses a 1.2 V core supply. Its -4 designation identifies a performance grade, while the commercial-temperature suffix supports designs operating between 0°C and 85°C. The package provides 400 surface-mount balls arranged for high-density board integration.

The Spartan-3A architecture combines programmable logic, dedicated arithmetic resources, block memory, programmable I/O, and dedicated configuration functions. With 667 MHz reported for the target device and 250 MHz cited in a summarized family specification, timing design must follow the speed-grade-specific AC and DC limits in AMD datasheet DS529. The 400-BGA footprint also requires careful via-in-pad, solder-mask, thermal, and signal-integrity planning during PCB layout.

Typical applications include industrial control, networked communications equipment, video and image processing, consumer peripherals, and cost-sensitive embedded systems. The 311 I/O sites make the device useful for parallel interfaces and substantial external bus connectivity, while the integrated DSP and memory resources can reduce the need for external components. Designs must also account for configuration storage, clocking, decoupling, and JTAG programming requirements.

The primary design trade-off is fixed legacy-device availability rather than raw logic capacity. Because the Spartan-3A family is an established platform, engineers should validate I/O standards, timing, tooling support, and PCB footprint compatibility before committing a new production design. Use AMD DS529 for the authoritative family pinout, package information, electrical characteristics, and configuration guidance.

This product record combines the device specifications, package constraints, lifecycle considerations, drop-in comparisons, and practical PCB guidance into an engineering-focused reference. It also highlights the need to verify toolchain availability and current sourcing status before starting a design, particularly where long-lived industrial or aerospace programs depend on exact device continuity.

Alternativas drop-in para XC3S700A-4FG400C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com XC3S700A-4FG400C (mesmo formato e footprint) — diferindo em Package.

XC3S700A-4FG400I

✅ Drop-In
AMD
📦 S-PBGA-B400, 400 balls
Spartan-3A field-programmable gate array (FPGA) · 13,248 cells · 311 I/O · 368,640 bits · 400-BGA · -4 grade · Industrial grade · Spartan-3A

Consulte o preço

Ver ficha técnica →

XC3S700A-4FGG400C

✅ Drop-In
📦 S-PBGA-B400, 400 balls
Uses the 400-BGA ordering notation shown in the family specifications; the -4 speed grade, 700,000-gate density, and 0°C to 85°C commercial temperature target are unchanged

📋 Alternativa de referência (fora do catálogo)

XC3S700A-5FGG400C

✅ Drop-In
📦 S-PBGA-B400, 400 balls
Uses the -5 speed grade instead of the target's -4 grade while retaining approximately 700,000 system gates, 13,248 logic cells, 311 I/O, and the 400-BGA package

📋 Alternativa de referência (fora do catálogo)

XC3S700A-4FG400C Classificações máximas e características elétricas

Product Type Spartan-3A Field-Programmable Gate Array (FPGA)
System Gates Approximately 700,000 gates
Configurable Logic Cells 13,248 cells
Maximum I/O 311 I/O
Block RAM 45 KB
Maximum Device Frequency 667 MHz
Family Timing Figure 250 MHz
Supply Voltage Range 1.14 V to 1.26 V
Nominal Core Voltage 1.2 V
Process Technology 90 nm
Speed Grade -4
Minimum Operating Temperature 0°C
Maximum Operating Temperature 85°C
Encapsulamento S-PBGA-B400, 400 balls
Package Dimensions 21 mm by 21 mm
Tipo de montagem Surface Mount
Termination SMD/SMT
Lead-Free Status Contains Lead
Status RoHS Non-Compliant
Configuration FPGA programmable logic
DSP Support Integrated DSP multipliers

Guia de Configuração de Pinos do XC3S700A-4FG400C 21 mm by 21 mm

Configuração de pinos para XC3S700A-4FG400C (pacote 21 mm by 21 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 21 mm by 21 mm para XC3S700A-4FG400C

Nenhum dado detalhado de pinagem disponível para XC3S700A-4FG400C.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

XC3S700A-4FG400C é adequado para 6 aplicaçãos: Industrial Control Systems, Network Interface Equipment, Video and Image Processing, Cost-Sensitive Consumer Peripherals, Digital Signal Processing, Embedded Instrumentation and Test Equipment.

🏭

Industrial Control Systems

The XC3S700A-4FG400C is suitable for industrial controllers that coordinate sensors, actuators, motion logic, and communication interfaces. Its approximately 700,000 system gates and 13,248 configurable logic cells provide substantial parallel-processing capacity, while 311 I/O sites simplify connection to field buses, digital I/O modules, and discrete control signals. The 1.14 V to 1.26 V core range and 0°C to 85°C commercial grade fit controlled indoor equipment. A practical benefit is consolidating several fixed-function controllers into one programmable device, although the 400-BGA footprint requires careful fanout and decoupling. Designers should use DS529 timing constraints, validate industrial EMC requirements, and verify long-term device continuity before production release.

🌐

Network Interface Equipment

The XC3S700A-4FG400C can implement protocol conversion, packet preprocessing, buffering, and parallel network-interface logic in compact networking equipment. Its 311 I/O sites are useful for high-speed parallel interfaces to external PHYs, while 45 KB of block RAM can support packet queues, descriptors, and dual-port buffering. The device's programmable architecture allows protocol revisions without changing the PCB. Engineering trade-offs include careful clock-domain crossing, I/O timing margin, and signal-integrity analysis for high-speed links. Use dedicated clock-capable pins, follow the AMD pinout, and validate timing for the -4 grade. Because this is a mature platform, confirm that the required FPGA development tools and configuration memory remain supported for the product's service life.

📺

Video and Image Processing

The XC3S700A-4FG400C is appropriate for parallel video pipelines, image preprocessing, color conversion, pixel timing, and simple capture or display control. Its 13,248 configurable logic cells and integrated DSP multipliers can process multiple parallel channels, while 311 I/O sites can support parallel pixel buses and control signals when board routing permits. The 400-BGA package offers dense connectivity but demands via-in-pad-aware assembly and careful return-path design. Designers should register high-speed pixel boundaries, constrain clocks according to DS529, and avoid routing high-speed interfaces through long PCB stubs. Power integrity and decoupling are particularly important when many I/O banks switch simultaneously. Production planning should include verification of device longevity, configuration-memory availability, and compatibility with the selected Xilinx toolchain.

🧩

Cost-Sensitive Consumer Peripherals

The XC3S700A-4FG400C can consolidate control, display, data acquisition, and interface functions in legacy consumer peripherals and embedded products. Programmable logic permits one board design to support several peripheral variants, while 45 KB of block RAM can serve FIFO, buffer, or look-up-table functions without external memory. The trade-off is that the 400-BGA package is larger and more assembly-intensive than a leaded or smaller-footprint FPGA, so it is most appropriate where the 311 I/O sites justify the package density. Before adopting the device in a new consumer product, review its non-RoHS status, obtain current environmental documentation, and assess whether a current low-cost FPGA offers a better lifecycle and assembly profile. The older platform also requires toolchain and configuration-memory support.

⚡

Digital Signal Processing

The Spartan-3A XC3S700A-4FG400C supports cost-sensitive digital signal-processing functions through programmable logic, integrated DSP multipliers, and 45 KB of block RAM. Typical blocks include digital filters, fixed-point multipliers, correlation functions, waveform generation, and decimating or interpolating stages. The -4 speed grade provides timing margin relative to the -5 option, but the actual system rate remains limited by the selected pipeline structure, I/O standard, and board timing. Use synchronous DSP pipelines with registered outputs, apply DS529 timing constraints, and evaluate numerical accuracy rather than relying on nominal gate count. Supply noise and clock jitter must be controlled because they directly affect multiplier and filter performance. For new programs, confirm availability of compatible synthesis tools, IP, documentation, and long-term configuration-memory support.

🔧

Embedded Instrumentation and Test Equipment

The XC3S700A-4FG400C can implement acquisition control, pattern generation, timing sequencing, and communication for compact instrumentation. Its 311 I/O sites provide broad connectivity to sensors, ADC or DAC interfaces, status indicators, and memory devices, while the programmable architecture supports reusable test algorithms and instrument-specific protocols. The 400-BGA footprint can shorten high-speed connections between the FPGA and supporting components, but it makes PCB fabrication, assembly, and inspection more demanding. Designers should budget clock jitter and analog-interface settling time separately from the FPGA's nominal maximum frequency, and use DS529 for pin and timing constraints. The device's legacy lifecycle status should be checked against the intended service period, including configuration memories, programming tools, and calibration workflows.

Resumo dos produtos recomendados

XC3S700A-4FG400C Xilinx Usado em: Industrial Control Systems, Network Interface Equipment, Video and Image Processing, Cost-Sensitive Consumer Peripherals, Digital Signal Processing, Embedded Instrumentation and Test Equipment XC3S700A-5FGG400C Related 400-BGA Spartan-3A device for timing-budget alternatives Usado em: Industrial Control Systems, Video and Image Processing, Embedded Instrumentation and Test Equipment XC3S700A-4FGG400C Closely related 400-BGA Spartan-3A configuration Usado em: Network Interface Equipment, Digital Signal Processing XC3S700A-4FG400I AMD Usado em: Cost-Sensitive Consumer Peripherals
What is the XC3S700A-4FG400C?
The XC3S700A-4FG400C is a Xilinx Spartan-3A FPGA with approximately 700,000 system gates, 13,248 configurable logic cells, 311 I/O sites, and up to 45 KB of block RAM. It is packaged in a 400-ball S-PBGA measuring 21 mm by 21 mm. AMD datasheet DS529 identifies the device within the Extended Spartan-3A family and provides the authoritative family specifications, pinout, and electrical characteristics.
What is the operating voltage of XC3S700A-4FG400C?
The XC3S700A-4FG400C operates from 1.14 V to 1.26 V, with a nominal core voltage of 1.2 V. The family datasheet also distinguishes the core supply from external I/O supply requirements, which depend on the selected bank voltage and interface standard. Use the power architecture and decoupling recommendations in AMD datasheet DS529 rather than treating all 400 package balls as a single 1.2 V rail.
Where can I download the XC3S700A-4FG400C datasheet PDF?
The official family documentation is AMD datasheet DS529, titled Spartan-3A FPGA Family Data Sheet, which contains the device overview, specifications, pinouts, and package information. A direct manufacturer-family PDF is also available through the Xilinx-hosted document path listed in the product references. Always confirm the DS529 revision, device speed grade, temperature grade, and package code against the exact XC3S700A-4FG400C ordering information.
Where can I find the XC3S700A-4FG400C pinout?
The authoritative XC3S700A-4FG400C pinout is the Spartan-3A package pin table in AMD datasheet DS529. The device uses a 400-ball S-PBGA package, so ball assignments, power, ground, configuration, clock, and user I/O positions must be taken directly from the family datasheet. Do not infer ball locations from a different Spartan-3A package or from the 256-ball variants shown in search suggestions.
What are the key specifications of XC3S700A-4FG400C?
The principal specifications are approximately 700,000 system gates, 13,248 configurable logic cells, 311 I/O sites, 45 KB of block RAM, and a 667 MHz maximum device frequency reported for this part. The core operates over a 1.14 V to 1.26 V range and uses a 90 nm process. The -4 speed grade and 0°C to 85°C commercial temperature range distinguish the ordering code.
Can XC3S700A-4FG400I replace XC3S700A-4FG400C?
The XC3S700A-4FG400I is the closest drop-in candidate because it retains the same XC3S700A device, -4 speed grade, and 400-ball package family, but changes the temperature grade. The -C target is specified for 0°C to 85°C, while the -I ordering code represents the industrial temperature option. Confirm the exact ball map, supply requirements, and operating-temperature qualification before substitution.
Is XC3S700A-4FGG400C the same as XC3S700A-4FG400C?
XC3S700A-4FGG400C and XC3S700A-4FG400C identify closely related 400-BGA Spartan-3A configurations with the same -4 speed grade and 700,000-gate-class logic density. The package-ordering notation differs, so procurement, soldering, temperature-grade, and environmental requirements must be checked against the manufacturer ordering guide. Confirm the exact manufacturer MPN rather than treating the G characters as interchangeable without review.
XC3S700A-4FG400C vs XC3S700A-5FGG400C: which is better?
The XC3S700A-4FG400C is preferable when timing margin is important because the -4 grade is the faster ordering option, while the XC3S700A-5FGG400C uses the -5 grade. Both appear in the 700,000-gate Spartan-3A family with the same 400-BGA package and 311 I/O configuration. A substitution still requires timing analysis against the actual design constraints and confirmation of order-code details.
When should I choose XC3S700A-4FG400C over a 256-ball Spartan-3A?
Choose the XC3S700A-4FG400C when a design requires the 400-ball package, approximately 311 available I/O, or more board-routing flexibility than a 256-ball variant provides. Choose a 256-ball device only when its I/O count and package are sufficient and smaller board area is more important. The suggestions XC3S700A-4FTG256C and XC3S700A-5FTG256C are not drop-in alternatives because their package differs.
What can replace XC3S700A-4FG400C?
The best drop-in candidate identified is the XC3S700A-4FG400I, which retains the 400-package Spartan-3A platform and -4 speed grade while changing the temperature grade. Closely related 400-ball ordering variants include XC3S700A-4FGG400C and XC3S700A-5FGG400C. No unrelated FPGA family can be treated as a direct replacement because package ball maps, configuration standards, memory interfaces, and I/O behavior must match.
Is there an AMD or Xilinx cross-brand equivalent for XC3S700A-4FG400C?
No verified cross-brand drop-in equivalent was identified for the XC3S700A-4FG400C. The device depends on the Spartan-3A pin map, configuration interface, power architecture, and supported toolchain, so a superficially similar FPGA from another manufacturer is not automatically interchangeable. Any new-device migration should be treated as a redesign unless AMD confirms exact form, fit, function, and software compatibility.
How do I design the power supply for XC3S700A-4FG400C?
Design the XC3S700A-4FG400C around a nominal 1.2 V core supply within the 1.14 V to 1.26 V device range and provide the separately specified I/O supply voltages required by the selected banks. Place bulk and high-frequency decoupling capacitors close to their associated power balls and follow the power-plane and switching-current guidance in AMD datasheet DS529. Verify sequencing, startup current, tolerance, ripple, and thermal conditions across the full system-supply range.
What PCB considerations apply to the XC3S700A-4FG400C 400-BGA package?
The 400-BGA package requires a PCB footprint whose ball pitch and pad geometry match the manufacturer drawing exactly. Account for solder-mask-defined or non-mask-defined pads, via-in-pad construction, assembly process, thermal expansion, and the electrical return path through the BGA ball array. Place decoupling, configuration, clock, and JTAG connections for short current loops, and follow the AMD package drawing and design guidance for drill, pad, and paste dimensions.
Is XC3S700A-4FG400C currently in production?
The XC3S700A-4FG400C belongs to the mature Spartan-3A family and should be treated as an obsolete or legacy device for new-design planning. AMD support material identifies obsolete Spartan-3A-family devices and does not present this exact ordering code as a current general-purpose production choice. Before starting a design, request lifecycle confirmation for the exact suffix and obtain a written statement about long-term supply, change control, and supported software.
Where can I buy XC3S700A-4FG400C and what is its lead time?
Use the Request a Quote form on this page to request current XC3S700A-4FG400C availability, MOQ, lead time, and lot traceability. Because this is a mature FPGA with limited active distribution, stock and schedule can vary significantly by package suffix and provenance. Specify the exact MPN when requesting a quote and require authorized-channel documentation, date codes, factory traceability, and a condition statement before accepting an allocation.
Does XC3S700A-4FG400C meet RoHS requirements?
The published device listing identifies the XC3S700A-4FG400C as RoHS non-compliant and containing lead. This legacy status must be considered in new commercial, industrial, and regulated products, especially where component restrictions apply. Request current manufacturer environmental-compliance documentation for the exact order code, and do not substitute a different package or temperature suffix without reviewing its own material and RoHS declarations.

Dados de referência de engenharia para XC3S700A-4FG400C — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the XC3S700A-4FG400C for a legacy Spartan-3A design that requires the -4 timing grade, a 400-ball package, 311 I/O, and the established XC3S700A toolchain. Select the XC3S700A-4FG400I when the same electrical and package platform is needed for an industrial-temperature application, after confirming its complete ordering details. The XC3S700A-4FGG400C is the closest commercial-temperature ordering variant and should be used when it matches the required assembly and environmental designation. Use the XC3S700A-5FGG400C only when its lower speed grade still satisfies the complete timing budget. The XC3S700A-4FTG256C and XC3S700A-5FTG256C are not drop-in choices because they use a different package. For a new design, verify tool, configuration-memory availability, lifecycle continuity, and the device's RoHS status before committing the PCB.

Comparação com alternativas

Parâmetro Este produto XC3S700A-4FG400I XC3S700A-4FGG400C XC3S700A-5FGG400C
Brand Xilinx Xilinx Xilinx Xilinx
Package S-PBGA-B400, 400 balls S-PBGA-B400, 400 balls S-PBGA-B400, 400 balls S-PBGA-B400, 400 balls
FPGA Family Spartan-3A Spartan-3A Spartan-3A Spartan-3A
System Gates Approximately 700,000 gates Approximately 700,000 gates Approximately 700,000 gates Approximately 700,000 gates
Configurable Logic Cells 13,248 cells 13,248 cells 13,248 cells 13,248 cells
Maximum I/O 311 I/O 311 I/O 311 I/O 311 I/O
Block RAM 45 KB 45 KB 45 KB 45 KB
Speed Grade -4 -4 -4 -5
Temperature Grade Commercial, 0°C to 85°C Industrial ordering code Commercial ordering code Commercial ordering code
Core Supply Voltage 1.14 V to 1.26 V 1.14 V to 1.26 V 1.14 V to 1.26 V 1.14 V to 1.26 V
Process Technology 90 nm 90 nm 90 nm 90 nm

Principais diferenciais

  • Faster -4 speed grade (vs XC3S700A-5FGG400C)
  • Commercial-temperature ordering (vs XC3S700A-4FG400I)
  • High pin count for parallel connectivity (vs XC3S700A-4FTG256C)

Notas de projeto

Use the exact AMD package drawing for the 400-ball S-PBGA footprint rather than scaling a generic BGA land pattern. Confirm pad size, ball pitch, solder-mask opening, paste aperture, via-in-pad construction, and assembly tolerances with the fabricator. Provide a continuous ground reference beneath the device, avoid voids under thermal and power balls, and route sensitive clocks away from high-speed I/O return paths. Electrical and mechanical design reviews should compare the final stack-up and assembly process with the package drawing before release.

Plan the core rail for a nominal 1.2 V within the 1.14 V to 1.26 V operating range, and treat I/O supplies as separate constraints selected according to the active banks. Place bulk capacitance near the supply entry points and high-frequency decoupling directly across the relevant power and ground balls. Estimate worst-case dissipation from actual core and I/O activity rather than nominal gate count, then verify startup current, supply sequencing, ripple, and the regulator's transient response against the datasheet limits.

Use clock-capable pins for primary clocks and follow the DS529 timing constraints for every external interface. Treat the reported 667 MHz maximum device frequency as a device-level figure, not an achievable system rate for an arbitrary design. Constrain input and output paths, register high-speed interfaces where practical, and simulate worst-case timing with the correct -4 speed grade. PCB return paths should remain continuous across power and ground planes, with series termination selected from the actual edge rate and I/O standard rather than from frequency alone.

Do not treat the -4 and -5 ordering codes as electrically identical, even though both devices use the 400-BGA family package. Re-run timing analysis after any speed-grade change because the -5 device does not provide the same timing margin as the -4 grade. Also avoid substituting the 256-ball XC3S700A-4FTG256C or XC3S700A-5FTG256C directly: their package and ball map differ, so they require a PCB redesign and fresh pin, power, and configuration verification.

Informações de conformidade

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
No
Sem halogênios
Unknown
Minerais de conflito
Unknown

The device listing identifies the XC3S700A-4FG400C as RoHS non-compliant and containing lead. No current REACH, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.

Buscas relacionadas

xc3s700a 4fgg400i xc3s700a 5ftg256c xc3s700a 4ftg256c XC3S700A-4FG400C datasheet XC3S700A-4FG400C datasheet pdf XC3S700A-4FG400C pinout XC3S700A-4FG400C equivalent XC3S700A-4FG400C replacement XC3S700A-4FG400C footprint XC3S700A-4FG400C price XC3S700A-4FG400C stock Xilinx XC3S700A-4FG400C XC3S700A-4FG400C application circuit XC3S700A-4FG400C vs XC3S700A-5FGG400C

Componentes & termos relacionados

Xilinx AMD XC3S700A-4FG400C XC3S700A-4FG400I XC3S700A-4FGG400C XC3S700A-5FGG400C XC3S700A-4FTG256C XC3S700A-5FTG256C Spartan-3A Extended Spartan-3A FPGA field-programmable gate array programmable logic device semiconductor S-PBGA-B400 BGA package surface mount SMD configurable logic cell system gate block RAM DSP multiplier JTAG RoHS 90 nm process 1.14 V to 1.26 V 311 I/O 13,248 configurable logic cells 45 KB block RAM 667 MHz DS529
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ