XC3S700A-4FG400C 700K FPGA, 311 I/O, 400-BGA | Xilinx
MPN: XC3S700A-4FG400C ✗ پایان تولیدXC3S700A-4FG400C نمای کلی
An FPGA is a semiconductor whose digital logic, interconnect, and I/O can be configured after manufacture. Within the product hierarchy, the XC3S700A-4FG400C is a programmable logic device, then an FPGA, then a general-purpose semiconductor used for parallel processing, control, interface bridging, and embedded signal processing. The Spartan-3A family targets cost-sensitive applications requiring more capability than small CPLDs while avoiding the resource level of the largest FPGAs.
Key features include approximately 700,000 system gates, 13,248 logic cells, 311 I/O, and up to 45 KB of block RAM according to the family datasheet information. The device is manufactured using a 90 nm process and uses a 1.2 V core supply. Its -4 designation identifies a performance grade, while the commercial-temperature suffix supports designs operating between 0°C and 85°C. The package provides 400 surface-mount balls arranged for high-density board integration.
The Spartan-3A architecture combines programmable logic, dedicated arithmetic resources, block memory, programmable I/O, and dedicated configuration functions. With 667 MHz reported for the target device and 250 MHz cited in a summarized family specification, timing design must follow the speed-grade-specific AC and DC limits in AMD datasheet DS529. The 400-BGA footprint also requires careful via-in-pad, solder-mask, thermal, and signal-integrity planning during PCB layout.
Typical applications include industrial control, networked communications equipment, video and image processing, consumer peripherals, and cost-sensitive embedded systems. The 311 I/O sites make the device useful for parallel interfaces and substantial external bus connectivity, while the integrated DSP and memory resources can reduce the need for external components. Designs must also account for configuration storage, clocking, decoupling, and JTAG programming requirements.
The primary design trade-off is fixed legacy-device availability rather than raw logic capacity. Because the Spartan-3A family is an established platform, engineers should validate I/O standards, timing, tooling support, and PCB footprint compatibility before committing a new production design. Use AMD DS529 for the authoritative family pinout, package information, electrical characteristics, and configuration guidance.
This product record combines the device specifications, package constraints, lifecycle considerations, drop-in comparisons, and practical PCB guidance into an engineering-focused reference. It also highlights the need to verify toolchain availability and current sourcing status before starting a design, particularly where long-lived industrial or aerospace programs depend on exact device continuity.
جایگزینهای drop-in برای XC3S700A-4FG400C — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XC3S700A-4FG400C (همان فرمفاکتور و فوتپرینت) — متفاوت در Package.
XC3S700A-4FG400I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC3S700A-4FGG400C
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC3S700A-5FGG400C
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC3S700A-4FG400C حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Spartan-3A Field-Programmable Gate Array (FPGA) |
| System Gates | Approximately 700,000 gates |
| Configurable Logic Cells | 13,248 cells |
| Maximum I/O | 311 I/O |
| Block RAM | 45 KB |
| Maximum Device Frequency | 667 MHz |
| Family Timing Figure | 250 MHz |
| Supply Voltage Range | 1.14 V to 1.26 V |
| Nominal Core Voltage | 1.2 V |
| Process Technology | 90 nm |
| Speed Grade | -4 |
| Minimum Operating Temperature | 0°C |
| Maximum Operating Temperature | 85°C |
| بستهبندی | S-PBGA-B400, 400 balls |
| Package Dimensions | 21 mm by 21 mm |
| نوع نصب | Surface Mount |
| Termination | SMD/SMT |
| Lead-Free Status | Contains Lead |
| وضعیت RoHS | Non-Compliant |
| Configuration | FPGA programmable logic |
| DSP Support | Integrated DSP multipliers |
راهنمای پیکربندی پین XC3S700A-4FG400C 21 mm by 21 mm
پیکربندی پین برای XC3S700A-4FG400C (پکیج 21 mm by 21 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC3S700A-4FG400C.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC3S700A-4FG400C مناسب است برای 6 کاربردs: Industrial Control Systems, Network Interface Equipment, Video and Image Processing, Cost-Sensitive Consumer Peripherals, Digital Signal Processing, Embedded Instrumentation and Test Equipment.
Industrial Control Systems
The XC3S700A-4FG400C is suitable for industrial controllers that coordinate sensors, actuators, motion logic, and communication interfaces. Its approximately 700,000 system gates and 13,248 configurable logic cells provide substantial parallel-processing capacity, while 311 I/O sites simplify connection to field buses, digital I/O modules, and discrete control signals. The 1.14 V to 1.26 V core range and 0°C to 85°C commercial grade fit controlled indoor equipment. A practical benefit is consolidating several fixed-function controllers into one programmable device, although the 400-BGA footprint requires careful fanout and decoupling. Designers should use DS529 timing constraints, validate industrial EMC requirements, and verify long-term device continuity before production release.
پیشنهادی
Network Interface Equipment
The XC3S700A-4FG400C can implement protocol conversion, packet preprocessing, buffering, and parallel network-interface logic in compact networking equipment. Its 311 I/O sites are useful for high-speed parallel interfaces to external PHYs, while 45 KB of block RAM can support packet queues, descriptors, and dual-port buffering. The device's programmable architecture allows protocol revisions without changing the PCB. Engineering trade-offs include careful clock-domain crossing, I/O timing margin, and signal-integrity analysis for high-speed links. Use dedicated clock-capable pins, follow the AMD pinout, and validate timing for the -4 grade. Because this is a mature platform, confirm that the required FPGA development tools and configuration memory remain supported for the product's service life.
پیشنهادی
Video and Image Processing
The XC3S700A-4FG400C is appropriate for parallel video pipelines, image preprocessing, color conversion, pixel timing, and simple capture or display control. Its 13,248 configurable logic cells and integrated DSP multipliers can process multiple parallel channels, while 311 I/O sites can support parallel pixel buses and control signals when board routing permits. The 400-BGA package offers dense connectivity but demands via-in-pad-aware assembly and careful return-path design. Designers should register high-speed pixel boundaries, constrain clocks according to DS529, and avoid routing high-speed interfaces through long PCB stubs. Power integrity and decoupling are particularly important when many I/O banks switch simultaneously. Production planning should include verification of device longevity, configuration-memory availability, and compatibility with the selected Xilinx toolchain.
پیشنهادی
Cost-Sensitive Consumer Peripherals
The XC3S700A-4FG400C can consolidate control, display, data acquisition, and interface functions in legacy consumer peripherals and embedded products. Programmable logic permits one board design to support several peripheral variants, while 45 KB of block RAM can serve FIFO, buffer, or look-up-table functions without external memory. The trade-off is that the 400-BGA package is larger and more assembly-intensive than a leaded or smaller-footprint FPGA, so it is most appropriate where the 311 I/O sites justify the package density. Before adopting the device in a new consumer product, review its non-RoHS status, obtain current environmental documentation, and assess whether a current low-cost FPGA offers a better lifecycle and assembly profile. The older platform also requires toolchain and configuration-memory support.
پیشنهادی
Digital Signal Processing
The Spartan-3A XC3S700A-4FG400C supports cost-sensitive digital signal-processing functions through programmable logic, integrated DSP multipliers, and 45 KB of block RAM. Typical blocks include digital filters, fixed-point multipliers, correlation functions, waveform generation, and decimating or interpolating stages. The -4 speed grade provides timing margin relative to the -5 option, but the actual system rate remains limited by the selected pipeline structure, I/O standard, and board timing. Use synchronous DSP pipelines with registered outputs, apply DS529 timing constraints, and evaluate numerical accuracy rather than relying on nominal gate count. Supply noise and clock jitter must be controlled because they directly affect multiplier and filter performance. For new programs, confirm availability of compatible synthesis tools, IP, documentation, and long-term configuration-memory support.
پیشنهادی
Embedded Instrumentation and Test Equipment
The XC3S700A-4FG400C can implement acquisition control, pattern generation, timing sequencing, and communication for compact instrumentation. Its 311 I/O sites provide broad connectivity to sensors, ADC or DAC interfaces, status indicators, and memory devices, while the programmable architecture supports reusable test algorithms and instrument-specific protocols. The 400-BGA footprint can shorten high-speed connections between the FPGA and supporting components, but it makes PCB fabrication, assembly, and inspection more demanding. Designers should budget clock jitter and analog-interface settling time separately from the FPGA's nominal maximum frequency, and use DS529 for pin and timing constraints. The device's legacy lifecycle status should be checked against the intended service period, including configuration memories, programming tools, and calibration workflows.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC3S700A-4FG400C — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC3S700A-4FG400I | XC3S700A-4FGG400C | XC3S700A-5FGG400C |
|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | S-PBGA-B400, 400 balls | S-PBGA-B400, 400 balls | S-PBGA-B400, 400 balls | S-PBGA-B400, 400 balls |
| FPGA Family | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A |
| System Gates | Approximately 700,000 gates | Approximately 700,000 gates | Approximately 700,000 gates | Approximately 700,000 gates |
| Configurable Logic Cells | 13,248 cells | 13,248 cells | 13,248 cells | 13,248 cells |
| Maximum I/O | 311 I/O | 311 I/O | 311 I/O | 311 I/O |
| Block RAM | 45 KB | 45 KB | 45 KB | 45 KB |
| Speed Grade | -4 | -4 | -4 | -5 |
| Temperature Grade | Commercial, 0°C to 85°C | Industrial ordering code | Commercial ordering code | Commercial ordering code |
| Core Supply Voltage | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm |
تفاوتهای کلیدی
- Faster -4 speed grade (در مقابلXC3S700A-5FGG400C)
- Commercial-temperature ordering (در مقابلXC3S700A-4FG400I)
- High pin count for parallel connectivity (در مقابلXC3S700A-4FTG256C)
یادداشتهای طراحی
Use the exact AMD package drawing for the 400-ball S-PBGA footprint rather than scaling a generic BGA land pattern. Confirm pad size, ball pitch, solder-mask opening, paste aperture, via-in-pad construction, and assembly tolerances with the fabricator. Provide a continuous ground reference beneath the device, avoid voids under thermal and power balls, and route sensitive clocks away from high-speed I/O return paths. Electrical and mechanical design reviews should compare the final stack-up and assembly process with the package drawing before release.
Plan the core rail for a nominal 1.2 V within the 1.14 V to 1.26 V operating range, and treat I/O supplies as separate constraints selected according to the active banks. Place bulk capacitance near the supply entry points and high-frequency decoupling directly across the relevant power and ground balls. Estimate worst-case dissipation from actual core and I/O activity rather than nominal gate count, then verify startup current, supply sequencing, ripple, and the regulator's transient response against the datasheet limits.
Use clock-capable pins for primary clocks and follow the DS529 timing constraints for every external interface. Treat the reported 667 MHz maximum device frequency as a device-level figure, not an achievable system rate for an arbitrary design. Constrain input and output paths, register high-speed interfaces where practical, and simulate worst-case timing with the correct -4 speed grade. PCB return paths should remain continuous across power and ground planes, with series termination selected from the actual edge rate and I/O standard rather than from frequency alone.
Do not treat the -4 and -5 ordering codes as electrically identical, even though both devices use the 400-BGA family package. Re-run timing analysis after any speed-grade change because the -5 device does not provide the same timing margin as the -4 grade. Also avoid substituting the 256-ball XC3S700A-4FTG256C or XC3S700A-5FTG256C directly: their package and ball map differ, so they require a PCB redesign and fresh pin, power, and configuration verification.
اطلاعات انطباق
The device listing identifies the XC3S700A-4FG400C as RoHS non-compliant and containing lead. No current REACH, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.