Xilinx

XC4VFX100-10FFG1152C - 94,896-Cell FPGA | Xilinx | Industrial

N.º da peça: XC4VFX100-10FFG1152C ✓ Ativo
1.2 V Vdss 1152-pin FCBGA Package 1028 MHz Speed
MOQ: 1 |

XC4VFX100-10FFG1152C Visão geral

The Xilinx, Inc. XC4VFX100-10FFG1152C is a Virtex-4 FX field-programmable gate array with 94,896 logic cells, 576 user I/Os and a maximum internal clock frequency of 1028 MHz. Manufactured on a 90 nm CMOS process, the device is packaged in a 1152-pin FCBGA and operates from 0°C to 85°C.

An FPGA is a programmable semiconductor in which configurable logic blocks, memory resources, input/output circuitry and dedicated processing elements form a hardware function that is defined after manufacture. Within the broader semiconductor hierarchy, this device is an integrated circuit, a programmable-logic device and an FPGA. The Virtex-4 FX architecture targets demanding parallel processing, signal processing, networking, communications, embedded control and test-equipment designs.

The XC4VFX100-10FFG1152C combines 10,544 configurable logic blocks or logic cells with 6,930,432 RAM bits. Its 576 I/Os provide substantial connectivity for high-speed data paths and external interfaces. The -10 suffix identifies the device speed grade, while the 1152-pin package supports a large number of power, ground, configuration and user-I/O connections. A 1.2 V internal supply voltage and 90 nm CMOS process are also identified for this device.

The architecture combines programmable logic with substantial block RAM and dedicated hardware resources, allowing multiple parallel datapaths to be implemented without relying on a processor for real-time control. Its 1028 MHz maximum internal frequency provides a headline timing figure, although practical operating performance also depends on the selected speed grade, clocking resources, I/O standards, routing demand, power characteristics and PCB implementation.

Typical applications include high-speed network interface equipment, telecom and industrial control systems, instrumentation, signal processing, test and measurement platforms, embedded vision systems and communications infrastructure. The 576-I/O count is particularly useful for designs requiring parallel data acquisition, multiple high-speed interfaces or extensive external memory connectivity.

Board design must account for the FCBGA-1152 footprint, controlled-impedance routing, multilayer power distribution, thermal management, decoupling and FPGA-specific configuration requirements. Differential pairs and high-speed interfaces should be routed with the reference-plane geometry and matching practices specified in the manufacturer’s design documentation.

This page organizes the device’s core FPGA, logic, memory, I/O, package, temperature and process information into an engineering-focused format, together with drop-in ordering options, comparison parameters and practical selection guidance for Virtex-4 FX designs.

Alternativas drop-in para XC4VFX100-10FFG1152C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

XC4VFX100-10FFG1152I

✅ Drop-In
📦 1152-pin FCBGA
Operating temperature changes from 0°C to 85°C to -40°C to +100°C, while the -10 speed grade, 94,896 logic cells and 1152-pin package remain unchanged.

📋 Alternativa de referência (fora do catálogo)

XC4VFX100-11FFG1152C

✅ Drop-In
📦 1152-pin FCBGA
Speed grade changes from -10 to -11; logic density remains 94,896 cells and the package remains 1152-pin FCBGA.

📋 Alternativa de referência (fora do catálogo)

XC4VFX100-12FFG1152C

✅ Drop-In ⚠️ Especificações não verificadas
📦 1152-pin FCBGA
Speed grade changes from -10 to -12, with a faster timing target; logic density and 1152-pin FCBGA footprint remain unchanged.

📋 Alternativa de referência (fora do catálogo)

XC4VFX100-10FF1152C

✅ Drop-In
📦 1152-pin FCBGA
Commercial-temperature ordering code uses the FF package suffix instead of FFG; speed grade remains -10 and the package remains 1152-pin FCBGA.

📋 Alternativa de referência (fora do catálogo)

XC4VFX100-11FF1152I

✅ Drop-In
📦 1152-pin FCBGA
Speed grade changes from -10 to -11 and commercial temperature changes to an industrial range; logic density and 1152-pin FCBGA package remain unchanged.

📋 Alternativa de referência (fora do catálogo)

XC4VFX100-10FFG1152C Classificações máximas e características elétricas

Device Type Virtex-4 FX field-programmable gate array (FPGA)
Logic Cells 94,896 cells
Configurable Logic Blocks 10,544 blocks
RAM Bits 6,930,432 bits
User I/O 576 I/Os
Maximum Internal Frequency 1028 MHz
Logic Family CMOS
Process Technology 90 nm
Internal Supply Voltage 1.2 V
Speed Grade -10
Encapsulamento 1152-pin FCBGA
Total Package Pins 1152 pins
Temperatura de operação 0°C to 85°C
Tipo de montagem Surface-mount technology (SMT)
Lead-Free Status Lead-free
Product Status Active

Guia de Configuração de Pinos do XC4VFX100-10FFG1152C 1152 pins

Configuração de pinos para XC4VFX100-10FFG1152C (pacote 1152 pins). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 1152 pins para XC4VFX100-10FFG1152C

Nenhum dado detalhado de pinagem disponível para XC4VFX100-10FFG1152C.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

XC4VFX100-10FFG1152C é adequado para 6 aplicaçãos: High-Speed Network Interface Equipment, Parallel Data Acquisition Systems, Industrial Control and Automation, Digital Signal Processing, Test and Measurement Instrumentation, Communications and Embedded Control.

🌐

High-Speed Network Interface Equipment

The XC4VFX100-10FFG1152C fits network-interface designs requiring extensive parallel connectivity and high-density programmable logic. Its 576 user I/Os support packet buffering, physical-layer interfaces, status logic and backplane connections, while 10,544 configurable logic blocks can implement protocol processing and traffic management in parallel. The 1028 MHz maximum internal frequency supports demanding clock domains, although external SerDes or PHY behavior depends on the selected I/O standard and board design. Use short, impedance-controlled routes for high-speed interfaces and keep the FCBGA power and ground structure electrically continuous. Compared with a smaller FPGA, the device provides more logic, memory and I/O headroom without requiring multiple devices, reducing synchronization and inter-chip communication complexity.

📺

Parallel Data Acquisition Systems

The XC4VFX100-10FFG1152C is suitable for parallel acquisition systems that must combine many channels with real-time filtering or preprocessing. Its 576 I/Os can accommodate wide input buses, while 6,930,432 RAM bits support sample buffering and temporary storage inside the FPGA. The 94,896-cell fabric allows acquisition timing, filtering, channel control and data formatting to be implemented concurrently. Practical designs must verify analog-interface voltage, acquisition rate, external memory requirements and pin-location constraints before schematic capture. Place the FPGA, memory and analog interface in a controlled signal-integrity layout, and use short return paths for clocks. The device’s large package provides many I/Os but requires multilayer escape routing, making component placement and power-plane continuity central to successful implementation.

🏭

Industrial Control and Automation

The XC4VFX100-10FFG1152C can implement deterministic industrial control, sequencing and machine-interlock logic in parallel with communications and diagnostics. Its 94,896 logic cells and 10,544 configurable logic blocks provide substantial capacity for control state machines, motion sequencing, protocol conversion and redundant monitoring. The 576 I/Os simplify connections to sensors, actuator interfaces, counters and industrial communications. For installations exposed to temperature variation, XC4VFX100-10FFG1152I provides the same -10 speed grade with a stated -40°C to +100°C range. The commercial target is appropriate for 0°C to 85°C operation. System partitioning should isolate timing-critical paths, and power, clock distribution and ground planes should be designed to prevent simultaneous switching noise from affecting adjacent control circuitry.

⚙️

Digital Signal Processing

The XC4VFX100-10FFG1152C supports parallel digital signal-processing designs where filtering, transform, correlation or channelization functions must run concurrently. The large logic fabric accommodates replicated arithmetic pipelines, while 6,930,432 RAM bits provide storage for coefficients, samples and intermediate results. Its 1028 MHz maximum internal frequency enables high-speed pipeline architectures, subject to the selected -10 speed grade and timing closure. Designers should map DSP operations to the Virtex-4 FX dedicated resources where appropriate and account for routing congestion on large designs. Clocking, reset distribution and data alignment are critical because parallel datapaths can amplify small timing or skew differences. A multilayer PCB with uninterrupted power planes, short clock routes and carefully matched data paths improves implementation quality.

🔧

Test and Measurement Instrumentation

The XC4VFX100-10FFG1152C is appropriate for modular test and measurement equipment requiring programmable acquisition, pattern generation, timing control and data analysis. Its 576 I/Os provide parallel connections to instruments, fixture electronics and memory, while the 94,896-cell fabric allows multiple measurement channels to execute concurrently. The 1028 MHz maximum internal frequency is useful for timing-generation and correlation pipelines, although practical jitter and timing accuracy depend on clocking resources and external circuitry. Use the manufacturer’s clocking and pinout documentation to preserve intended clock regions, and isolate sensitive analog sections from switching nodes. The FCBGA-1152 package supports high connectivity but demands careful escape routing, layer transitions and thermal design in dense instrumentation chassis.

📡

Communications and Embedded Control

The XC4VFX100-10FFG1152C can combine communications front-end control, protocol handling and embedded control logic in a single Virtex-4 FX device. The 576 I/Os offer ample connectivity for parallel buses, memory interfaces, status signals and multiple channels, while the configurable logic and RAM resources support simultaneous operation of communication and supervisory tasks. Its 90 nm CMOS implementation and 1.2 V internal supply identify it as a high-density programmable-logic device rather than a hard microcontroller replacement. The -10 speed grade should be validated against all critical clock domains and I/O timing. Designers should preserve configuration access, implement reliable startup sequencing and maintain power integrity across the many package connections to avoid intermittent failures during high-utilization operation.

Resumo dos produtos recomendados

XC4VFX100-10FFG1152I Industrial-temperature pin-compatible option Usado em: High-Speed Network Interface Equipment, Industrial Control and Automation, Digital Signal Processing, Communications and Embedded Control XC4VFX100-11FFG1152C Faster speed-grade option in the same package Usado em: High-Speed Network Interface Equipment, Digital Signal Processing, Communications and Embedded Control XC4VFX100-10FF1152C Commercial-temperature package ordering option Usado em: Parallel Data Acquisition Systems, Test and Measurement Instrumentation XC4VFX100-11FF1152I Industrial-temperature alternative with different speed grade Usado em: Parallel Data Acquisition Systems, Test and Measurement Instrumentation XC4VFX100-12FFG1152C Same-package faster speed grade Usado em: Industrial Control and Automation
What is the XC4VFX100-10FFG1152C?
The XC4VFX100-10FFG1152C is a Xilinx Virtex-4 FX FPGA containing 94,896 logic cells, 576 user I/Os and 6,930,432 RAM bits in a 1152-pin FCBGA package. According to the manufacturer datasheet information, it uses a 90 nm CMOS process, a 1.2 V internal supply and a maximum internal clock frequency of 1028 MHz. It is intended for high-density parallel logic, signal-processing, communications and industrial control designs.
How many logic cells and I/Os does XC4VFX100-10FFG1152C have?
The XC4VFX100-10FFG1152C provides 94,896 logic cells organized in 10,544 configurable logic blocks, along with 576 user I/Os. The manufacturer’s device information also identifies 6,930,432 RAM bits. These resources allow designers to implement wide parallel datapaths, substantial internal buffering and numerous external interfaces while retaining a single programmable-logic package.
What is the maximum clock frequency of XC4VFX100-10FFG1152C?
The maximum internal frequency of the XC4VFX100-10FFG1152C is 1028 MHz. According to the manufacturer datasheet information, the device is the -10 speed-grade member of the Virtex-4 FX family, whose available speed grades include -12, -11 and -10. Real designs must still meet timing for the selected clock, I/O standard, logic utilization and routing configuration.
What package does XC4VFX100-10FFG1152C use?
The XC4VFX100-10FFG1152C uses a 1152-pin FCBGA package with 576 user I/Os. The package also provides dedicated connections for power, ground and configuration. Because the FCBGA requires dense escape routing and multilayer construction, the PCB should follow the manufacturer’s package, footprint and design-guideline recommendations rather than relying on a generic BGA land pattern.
What is the operating temperature range of XC4VFX100-10FFG1152C?
The commercial XC4VFX100-10FFG1152C is specified for an operating temperature range of 0°C to 85°C. The -10 designation identifies its speed grade, not its temperature grade. If the enclosure can reach -40°C to +100°C, use an industrial-temperature ordering option such as XC4VFX100-10FFG1152I, subject to confirmation of its complete ordering-code and package details.
Where can I download the XC4VFX100-10FFG1152C datasheet?
The XC4VFX100-10FFG1152C datasheet is available through the Xilinx datasheet listing at https://www.datasheets.com/xilinx/xc4vfx100-10ffg1152c. The manufacturer documentation identifies a 1152-pin lead-free S-PBGA-B1152 FPGA, a 0°C to 85°C temperature range and a 1028 MHz maximum clock frequency. Use the pin-description, DC characteristics and PCB design sections when assigning connections and layout constraints.
What is the best drop-in replacement for XC4VFX100-10FFG1152C?
The best drop-in replacement depends on whether speed grade or temperature coverage matters. XC4VFX100-10FFG1152I preserves the -10 speed grade while extending the stated range to -40°C to +100°C, whereas XC4VFX100-11FFG1152C changes the speed grade from -10 to -11. Both retain the 1152-pin FCBGA format and 94,896-cell density. Confirm pinout, voltage, configuration and timing before substitution.
Can XC4VFX100-11FFG1152C replace XC4VFX100-10FFG1152C?
XC4VFX100-11FFG1152C can be considered a drop-in electrical and package alternative because it retains the same Virtex-4 FX density, 1152-pin FCBGA format and pin-compatible ordering structure. Its -11 speed grade differs from the target -10 grade and may affect timing closure and power. Existing -10 bitstreams should not be assumed to work with a different device or configuration.
When should I choose XC4VFX100-10FFG1152I over XC4VFX100-10FFG1152C?
Choose XC4VFX100-10FFG1152I when the system must operate across an industrial temperature range extending to -40°C and +100°C. The target XC4VFX100-10FFG1152C is specified for 0°C to 85°C, so it is better suited to controlled commercial or industrial ambient conditions. Both parts retain the -10 speed grade and 1152-pin FCBGA architecture, allowing thermal-range qualification to drive the choice.
Is XC4VFX100-10FFG1152C suitable for high-speed data acquisition?
The XC4VFX100-10FFG1152C is suitable for many parallel data-acquisition designs because it provides 576 user I/Os, 94,896 logic cells, 6,930,432 RAM bits and a maximum internal frequency of 1028 MHz. Suitability still depends on the required sample rate, external memory interface, I/O voltage, timing closure and board-layer count. External memory and high-speed I/O implementations should be checked against the manufacturer’s timing and layout guidance.
What can replace XC4VFX100-10FFG1152C in an existing design?
Pin-compatible replacement candidates include XC4VFX100-10FFG1152I for a wider industrial temperature range, XC4VFX100-11FFG1152C for a different speed grade, and XC4VFX100-12FFG1152C for a faster -12 grade. These are same-family Virtex-4 FX options in the same 1152-pin FCBGA class. Verify the exact ordering code, temperature grade, speed grade, configuration memory interface and timing constraints.
Is there a cross-brand drop-in equivalent for XC4VFX100-10FFG1152C?
No cross-brand drop-in equivalent was established for the XC4VFX100-10FFG1152C. Although newer FPGA families can offer comparable or greater logic capacity, they are not automatically pin-compatible replacements because package balls, power rails, configuration interfaces, I/O standards and memory interfaces differ. Migration to another manufacturer is a new PCB-design exercise rather than a drop-in substitution. Same-family Xilinx options are the safer replacement path.
XC4VFX100-10FFG1152C vs XC4VFX100-11FFG1152C - which is better?
The XC4VFX100-10FFG1152C is preferable when existing -10 timing constraints are validated and the 0°C to 85°C range is adequate. The XC4VFX100-11FFG1152C offers a faster -11 speed grade, which may improve timing margin for demanding designs, but it can also change power and thermal behavior. Both provide the same 94,896-cell density and 1152-pin FCBGA format, so the decision should follow timing closure and qualification requirements.
Where can I buy XC4VFX100-10FFG1152C and what is its lead time?
Use the Request a Quote form on this page to request availability, current lead time, minimum order quantity and delivery options for XC4VFX100-10FFG1152C. Quote-based procurement is appropriate for a large 1152-pin FPGA that may require careful handling, moisture protection and traceability. Include the required package, temperature grade, quantity and target delivery date in the request.
What are the key specifications of XC4VFX100-10FFG1152C?
The XC4VFX100-10FFG1152C combines 94,896 logic cells, 10,544 configurable logic blocks, 6,930,432 RAM bits and 576 user I/Os in a 1152-pin FCBGA. According to the manufacturer datasheet information, the device uses a 90 nm CMOS process, operates from a 1.2 V internal supply, reaches a maximum internal frequency of 1028 MHz and supports a 0°C to 85°C operating range. It is a high-density Virtex-4 FX FPGA.
Does the XC4VFX100-10FFG1152C meet automotive AEC-Q100 requirements?
The XC4VFX100-10FFG1152C is not identified as an AEC-Q100-qualified automotive device in the available ordering information, so AEC-Q100 qualification should be treated as not applicable for this specific commercial-temperature ordering option. Automotive programs require a device with an explicitly documented automotive qualification status. Verify the final part number and qualification documentation with the manufacturer before using it in safety- or vehicle-related electronics.

Dados de referência de engenharia para XC4VFX100-10FFG1152C — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose XC4VFX100-10FFG1152C for a high-density Virtex-4 FX design operating from 0°C to 85°C when the -10 timing grade has been validated. Its 94,896 logic cells, 6,930,432 RAM bits and 576 I/Os provide ample capacity for parallel processing, acquisition, communications and control functions. Select XC4VFX100-10FFG1152I when the same -10 grade and package are required across a -40°C to +100°C operating range. Use XC4VFX100-11FFG1152C or XC4VFX100-12FFG1152C when additional timing margin justifies changing the speed grade, but rerun timing, power and thermal analysis. XC4VFX100-10FF1152C and XC4VFX100-11FF1152I provide ordering-code variations for commercial or industrial requirements. No cross-brand drop-in replacement was established because newer FPGA families generally require different packages, power systems and configuration interfaces.

Comparação com alternativas

Parâmetro Este produto XC4VFX100-10FFG1152I XC4VFX100-11FFG1152C XC4VFX100-12FFG1152C XC4VFX100-10FF1152C XC4VFX100-11FF1152I
Package 1152-pin FCBGA 1152-pin FCBGA 1152-pin FCBGA 1152-pin FCBGA 1152-pin FCBGA 1152-pin FCBGA
Brand Xilinx, Inc. Xilinx, Inc. Xilinx, Inc. Xilinx, Inc. Xilinx, Inc. Xilinx, Inc.
Logic Cells 94,896 cells 94,896 cells 94,896 cells 94,896 cells 94,896 cells 94,896 cells
Configurable Logic Blocks 10,544 blocks 10,544 blocks 10,544 blocks 10,544 blocks 10,544 blocks 10,544 blocks
RAM Bits 6,930,432 bits 6,930,432 bits 6,930,432 bits 6,930,432 bits 6,930,432 bits 6,930,432 bits
User I/O 576 I/Os 576 I/Os 576 I/Os 576 I/Os 576 I/Os 576 I/Os
Speed Grade -10 -10 -11 -12 -10 -11
Operating Temperature 0°C to 85°C -40°C to +100°C 0°C to 85°C 0°C to 85°C 0°C to 85°C -40°C to +100°C
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS

Principais diferenciais

  • High-density integration in one FPGA package (vs XC4VFX100-11FFG1152C)
  • Direct industrial-temperature option exists (vs XC4VFX100-10FFG1152I)
  • Commercial configuration preserves the established -10 timing target (vs XC4VFX100-11FF1152I)

Notas de projeto

Design the FCBGA-1152 footprint from the manufacturer package drawing rather than from a generic BGA library. The package has 1152 connections, so escape-routing density and layer count materially affect manufacturability. Preserve uninterrupted reference planes beneath the device, provide short via connections between outer and inner routing layers, and follow the specified ball-pad, solder-mask and paste geometry. The pad dimensions and package height are marked as data needed because no authoritative mechanical drawing was included.

Use a multilayer power distribution network with separate distribution or return paths for the 1.2 V internal supply and applicable I/O supplies. Place local decoupling at the device power balls and keep high-current paths short and wide to control impedance. Account for simultaneous switching across 576 I/Os when sizing power-supply capacity, regulators and copper connections. Decoupling values and sequencing requirements should follow the manufacturer’s power-guidance document rather than a generic bulk-capacitor arrangement.

Validate junction temperature under the highest expected I/O activity and internal utilization. The 1152-pin package provides extensive power and ground connectivity, but its thermal performance still depends on PCB copper area, layer count, airflow and the assembled device’s thermal boundary conditions. A thermal estimate cannot be calculated from the available electrical summary because package dimensions and the manufacturer’s thermal model are not present. Run system-level thermal analysis or obtain the package model before defining airflow requirements.

Route clocks and high-speed interfaces as controlled-impedance paths with continuous reference planes. Keep clock distribution symmetric, minimize stubs and avoid unnecessary layer transitions on timing-critical nets. Although the device supports up to 1028 MHz internally, that headline value does not guarantee equivalent external I/O performance. I/O standards, board topology, connector and transceiver characteristics, skew and return-path discontinuities must be evaluated as part of the complete interface design.

Do not treat a changed speed grade or temperature suffix as an unconditional drop-in substitution. A -11 or -12 device may alter timing margins, configuration behavior, power characteristics and thermal results, while an industrial -I option changes environmental qualification. Confirm the complete ordering code, pin mapping, configuration interface, supply requirements and device documentation. When moving between speed grades, rerun timing analysis and verify that the selected design still meets every clock-domain constraint.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Yes
Sem halogênios
Unknown
Minerais de conflito
Unknown

The device is described as a lead-free 1152-pin S-PBGA-B1152 FPGA. No explicit RoHS, REACH, halogen-free, conflict-minerals or automotive-qualification statement was available for this ordering code.

Dados verificados em: 2026-11-17 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

XC4VFX100-10FFG1152C datasheet XC4VFX100-10FFG1152C specifications XC4VFX100-10FFG1152C pinout XC4VFX100-10FFG1152C datasheet pdf XC4VFX100-10FFG1152C equivalent XC4VFX100-10FFG1152C replacement XC4VFX100-10FFG1152C price XC4VFX100-10FFG1152C stock Xilinx XC4VFX100-10FFG1152C XC4VFX100-10FFG1152C vs XC4VFX100-11FFG1152C XC4VFX100-10FFG1152C FCBGA-1152 footprint XC4VFX100-10FFG1152C application circuit

Componentes & termos relacionados

Xilinx, Inc. AMD Xilinx XC4VFX100-10FFG1152C XC4VFX100-10FFG1152I XC4VFX100-11FFG1152C XC4VFX100-12FFG1152C Virtex-4 FX field-programmable gate array FPGA programmable logic device integrated circuit semiconductor configurable logic block CLB block RAM logic cells user I/O FCBGA-1152 S-PBGA-B1152 surface-mount technology CMOS 90 nm process technology 1028 MHz 576 I/O 6,930,432 RAM bits
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ