XC4VFX100-10FFG1152C - 94,896-Cell FPGA | Xilinx | Industrial
MPN: XC4VFX100-10FFG1152C ✓ فعالXC4VFX100-10FFG1152C جائزہ
An FPGA is a programmable semiconductor in which configurable logic blocks, memory resources, input/output circuitry and dedicated processing elements form a hardware function that is defined after manufacture. Within the broader semiconductor hierarchy, this device is an integrated circuit, a programmable-logic device and an FPGA. The Virtex-4 FX architecture targets demanding parallel processing, signal processing, networking, communications, embedded control and test-equipment designs.
The XC4VFX100-10FFG1152C combines 10,544 configurable logic blocks or logic cells with 6,930,432 RAM bits. Its 576 I/Os provide substantial connectivity for high-speed data paths and external interfaces. The -10 suffix identifies the device speed grade, while the 1152-pin package supports a large number of power, ground, configuration and user-I/O connections. A 1.2 V internal supply voltage and 90 nm CMOS process are also identified for this device.
The architecture combines programmable logic with substantial block RAM and dedicated hardware resources, allowing multiple parallel datapaths to be implemented without relying on a processor for real-time control. Its 1028 MHz maximum internal frequency provides a headline timing figure, although practical operating performance also depends on the selected speed grade, clocking resources, I/O standards, routing demand, power characteristics and PCB implementation.
Typical applications include high-speed network interface equipment, telecom and industrial control systems, instrumentation, signal processing, test and measurement platforms, embedded vision systems and communications infrastructure. The 576-I/O count is particularly useful for designs requiring parallel data acquisition, multiple high-speed interfaces or extensive external memory connectivity.
Board design must account for the FCBGA-1152 footprint, controlled-impedance routing, multilayer power distribution, thermal management, decoupling and FPGA-specific configuration requirements. Differential pairs and high-speed interfaces should be routed with the reference-plane geometry and matching practices specified in the manufacturer’s design documentation.
This page organizes the device’s core FPGA, logic, memory, I/O, package, temperature and process information into an engineering-focused format, together with drop-in ordering options, comparison parameters and practical selection guidance for Virtex-4 FX designs.
کے لیے ڈراپ اِن متبادل XC4VFX100-10FFG1152C — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
XC4VFX100-10FFG1152I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VFX100-11FFG1152C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VFX100-12FFG1152C
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VFX100-10FF1152C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VFX100-11FF1152I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC4VFX100-10FFG1152C زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Virtex-4 FX field-programmable gate array (FPGA) |
| Logic Cells | 94,896 cells |
| Configurable Logic Blocks | 10,544 blocks |
| RAM Bits | 6,930,432 bits |
| User I/O | 576 I/Os |
| Maximum Internal Frequency | 1028 MHz |
| Logic Family | CMOS |
| Process Technology | 90 nm |
| Internal Supply Voltage | 1.2 V |
| Speed Grade | -10 |
| پیکیج | 1152-pin FCBGA |
| Total Package Pins | 1152 pins |
| آپریٹنگ درجہ حرارت | 0°C to 85°C |
| ماؤنٹنگ ٹائپ | Surface-mount technology (SMT) |
| Lead-Free Status | Lead-free |
| Product Status | Active |
XC4VFX100-10FFG1152C 1152 pins پن کنفیگریشن گائیڈ
XC4VFX100-10FFG1152C (1152 pins پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC4VFX100-10FFG1152C.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC4VFX100-10FFG1152C کے لیے موزوں ہے 6 ایپلیکیشنs: High-Speed Network Interface Equipment, Parallel Data Acquisition Systems, Industrial Control and Automation, Digital Signal Processing, Test and Measurement Instrumentation, Communications and Embedded Control.
High-Speed Network Interface Equipment
The XC4VFX100-10FFG1152C fits network-interface designs requiring extensive parallel connectivity and high-density programmable logic. Its 576 user I/Os support packet buffering, physical-layer interfaces, status logic and backplane connections, while 10,544 configurable logic blocks can implement protocol processing and traffic management in parallel. The 1028 MHz maximum internal frequency supports demanding clock domains, although external SerDes or PHY behavior depends on the selected I/O standard and board design. Use short, impedance-controlled routes for high-speed interfaces and keep the FCBGA power and ground structure electrically continuous. Compared with a smaller FPGA, the device provides more logic, memory and I/O headroom without requiring multiple devices, reducing synchronization and inter-chip communication complexity.
تجویز کردہ
Parallel Data Acquisition Systems
The XC4VFX100-10FFG1152C is suitable for parallel acquisition systems that must combine many channels with real-time filtering or preprocessing. Its 576 I/Os can accommodate wide input buses, while 6,930,432 RAM bits support sample buffering and temporary storage inside the FPGA. The 94,896-cell fabric allows acquisition timing, filtering, channel control and data formatting to be implemented concurrently. Practical designs must verify analog-interface voltage, acquisition rate, external memory requirements and pin-location constraints before schematic capture. Place the FPGA, memory and analog interface in a controlled signal-integrity layout, and use short return paths for clocks. The device’s large package provides many I/Os but requires multilayer escape routing, making component placement and power-plane continuity central to successful implementation.
تجویز کردہ
Industrial Control and Automation
The XC4VFX100-10FFG1152C can implement deterministic industrial control, sequencing and machine-interlock logic in parallel with communications and diagnostics. Its 94,896 logic cells and 10,544 configurable logic blocks provide substantial capacity for control state machines, motion sequencing, protocol conversion and redundant monitoring. The 576 I/Os simplify connections to sensors, actuator interfaces, counters and industrial communications. For installations exposed to temperature variation, XC4VFX100-10FFG1152I provides the same -10 speed grade with a stated -40°C to +100°C range. The commercial target is appropriate for 0°C to 85°C operation. System partitioning should isolate timing-critical paths, and power, clock distribution and ground planes should be designed to prevent simultaneous switching noise from affecting adjacent control circuitry.
تجویز کردہ
Digital Signal Processing
The XC4VFX100-10FFG1152C supports parallel digital signal-processing designs where filtering, transform, correlation or channelization functions must run concurrently. The large logic fabric accommodates replicated arithmetic pipelines, while 6,930,432 RAM bits provide storage for coefficients, samples and intermediate results. Its 1028 MHz maximum internal frequency enables high-speed pipeline architectures, subject to the selected -10 speed grade and timing closure. Designers should map DSP operations to the Virtex-4 FX dedicated resources where appropriate and account for routing congestion on large designs. Clocking, reset distribution and data alignment are critical because parallel datapaths can amplify small timing or skew differences. A multilayer PCB with uninterrupted power planes, short clock routes and carefully matched data paths improves implementation quality.
تجویز کردہ
Test and Measurement Instrumentation
The XC4VFX100-10FFG1152C is appropriate for modular test and measurement equipment requiring programmable acquisition, pattern generation, timing control and data analysis. Its 576 I/Os provide parallel connections to instruments, fixture electronics and memory, while the 94,896-cell fabric allows multiple measurement channels to execute concurrently. The 1028 MHz maximum internal frequency is useful for timing-generation and correlation pipelines, although practical jitter and timing accuracy depend on clocking resources and external circuitry. Use the manufacturer’s clocking and pinout documentation to preserve intended clock regions, and isolate sensitive analog sections from switching nodes. The FCBGA-1152 package supports high connectivity but demands careful escape routing, layer transitions and thermal design in dense instrumentation chassis.
تجویز کردہ
Communications and Embedded Control
The XC4VFX100-10FFG1152C can combine communications front-end control, protocol handling and embedded control logic in a single Virtex-4 FX device. The 576 I/Os offer ample connectivity for parallel buses, memory interfaces, status signals and multiple channels, while the configurable logic and RAM resources support simultaneous operation of communication and supervisory tasks. Its 90 nm CMOS implementation and 1.2 V internal supply identify it as a high-density programmable-logic device rather than a hard microcontroller replacement. The -10 speed grade should be validated against all critical clock domains and I/O timing. Designers should preserve configuration access, implement reliable startup sequencing and maintain power integrity across the many package connections to avoid intermittent failures during high-utilization operation.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC4VFX100-10FFG1152C — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC4VFX100-10FFG1152I | XC4VFX100-11FFG1152C | XC4VFX100-12FFG1152C | XC4VFX100-10FF1152C | XC4VFX100-11FF1152I |
|---|---|---|---|---|---|---|
| Package | 1152-pin FCBGA | 1152-pin FCBGA | 1152-pin FCBGA | 1152-pin FCBGA | 1152-pin FCBGA | 1152-pin FCBGA |
| Brand | Xilinx, Inc. | Xilinx, Inc. | Xilinx, Inc. | Xilinx, Inc. | Xilinx, Inc. | Xilinx, Inc. |
| Logic Cells | 94,896 cells | 94,896 cells | 94,896 cells | 94,896 cells | 94,896 cells | 94,896 cells |
| Configurable Logic Blocks | 10,544 blocks | 10,544 blocks | 10,544 blocks | 10,544 blocks | 10,544 blocks | 10,544 blocks |
| RAM Bits | 6,930,432 bits | 6,930,432 bits | 6,930,432 bits | 6,930,432 bits | 6,930,432 bits | 6,930,432 bits |
| User I/O | 576 I/Os | 576 I/Os | 576 I/Os | 576 I/Os | 576 I/Os | 576 I/Os |
| Speed Grade | -10 | -10 | -11 | -12 | -10 | -11 |
| Operating Temperature | 0°C to 85°C | -40°C to +100°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | -40°C to +100°C |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
اہم امتیازی خصوصیات
- High-density integration in one FPGA package (بمقابلہXC4VFX100-11FFG1152C)
- Direct industrial-temperature option exists (بمقابلہXC4VFX100-10FFG1152I)
- Commercial configuration preserves the established -10 timing target (بمقابلہXC4VFX100-11FF1152I)
ڈیزائن نوٹس
Design the FCBGA-1152 footprint from the manufacturer package drawing rather than from a generic BGA library. The package has 1152 connections, so escape-routing density and layer count materially affect manufacturability. Preserve uninterrupted reference planes beneath the device, provide short via connections between outer and inner routing layers, and follow the specified ball-pad, solder-mask and paste geometry. The pad dimensions and package height are marked as data needed because no authoritative mechanical drawing was included.
Use a multilayer power distribution network with separate distribution or return paths for the 1.2 V internal supply and applicable I/O supplies. Place local decoupling at the device power balls and keep high-current paths short and wide to control impedance. Account for simultaneous switching across 576 I/Os when sizing power-supply capacity, regulators and copper connections. Decoupling values and sequencing requirements should follow the manufacturer’s power-guidance document rather than a generic bulk-capacitor arrangement.
Validate junction temperature under the highest expected I/O activity and internal utilization. The 1152-pin package provides extensive power and ground connectivity, but its thermal performance still depends on PCB copper area, layer count, airflow and the assembled device’s thermal boundary conditions. A thermal estimate cannot be calculated from the available electrical summary because package dimensions and the manufacturer’s thermal model are not present. Run system-level thermal analysis or obtain the package model before defining airflow requirements.
Route clocks and high-speed interfaces as controlled-impedance paths with continuous reference planes. Keep clock distribution symmetric, minimize stubs and avoid unnecessary layer transitions on timing-critical nets. Although the device supports up to 1028 MHz internally, that headline value does not guarantee equivalent external I/O performance. I/O standards, board topology, connector and transceiver characteristics, skew and return-path discontinuities must be evaluated as part of the complete interface design.
Do not treat a changed speed grade or temperature suffix as an unconditional drop-in substitution. A -11 or -12 device may alter timing margins, configuration behavior, power characteristics and thermal results, while an industrial -I option changes environmental qualification. Confirm the complete ordering code, pin mapping, configuration interface, supply requirements and device documentation. When moving between speed grades, rerun timing analysis and verify that the selected design still meets every clock-domain constraint.
تعمیل کی معلومات
The device is described as a lead-free 1152-pin S-PBGA-B1152 FPGA. No explicit RoHS, REACH, halogen-free, conflict-minerals or automotive-qualification statement was available for this ordering code.