XC4VFX40-11FFG672C - 41,904-Cell Virtex-4 FX FPGA | AMD
N.º da peça: XC4VFX40-11FFG672C ✓ AtivoXC4VFX40-11FFG672C Visão geral
A field-programmable gate array is a semiconductor device whose digital circuits are configured after fabrication. An FPGA belongs to the programmable-logic hierarchy and provides configurable logic, block RAM, digital signal processing resources, and programmable I/O in one integrated device. Compared with a fixed-function application-specific integrated circuit, an FPGA allows design revisions to be implemented by loading a new bitstream rather than fabricating a new ASIC.
The XC4VFX40 provides 41,904 logic cells and 352 dedicated multipliers according to the AMD Virtex-4 family documentation. Its 90 nm CMOS process and 1.2 V operating core voltage place it within the Virtex-4 generation of Xilinx/AMD FPGAs. The 672-BBGA package supports high-density board integration, and the suffix “C” identifies the commercial-temperature product grade. The package is offered as FCBGA, also described in distributor catalogs as a 27 mm by 27 mm, 672-ball package.
The FX family combines configurable logic with dedicated DSP blocks for filtering, transforms, and fixed-point arithmetic. Designers can partition an application among programmable logic, DSP slices, block RAM, and external memory interfaces rather than using separate fixed-function devices for every function. The -11 grade provides a distinct speed option within the Virtex-4 portfolio, and exact clock, I/O, and memory-interface limits should be selected from the family data sheet for the intended design.
Typical uses include industrial control and automation, high-speed data acquisition, communications infrastructure, test and measurement, embedded signal processing, and prototype systems requiring substantial parallel logic. The same device family can implement control logic, hardware video or packet processing, and DSP pipelines when system timing, memory bandwidth, and I/O requirements remain within the device limits.
PCB design must account for the 672-ball package, its 1 mm ball pitch, separate supply requirements, and high-speed routing constraints. Use the AMD package documentation and pinout files to assign balls, connect all required power and ground rails, and implement the recommended decoupling, configuration, clock, and differential I/O layouts. Existing Vivado or ISE designs must be checked against the exact device identifier before recompilation.
This product record combines the exact device identity, family characteristics, package information, drop-in family alternatives, and practical selection guidance. The comparison table highlights where speed grade, temperature grade, or logic density changes affect substitution, while the design notes focus on footprint compatibility, configuration, signal integrity, and power integrity.
Alternativas drop-in para XC4VFX40-11FFG672C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC4VFX40-11FFG672C (mesmo formato e footprint) — diferindo em Logic Cells, Package Type, Core Supply Voltage, Device Type, Operating Temperature.
XC4VFX40-11FFG672I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VFX40-12FFG672C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC4VFX40-10FFG672C
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC4VFX60-11FFG672C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VFX40-11FFG672CE
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC4VFX40-11FFG672C Classificações máximas e características elétricas
| Device Type | Virtex-4 FX field-programmable gate array |
| Logic Cells | 41,904 cells |
| Dedicated Multipliers | 352 multipliers |
| Logic Blocks | 4,656 logic blocks |
| Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -11 |
| Temperature Grade | Commercial grade |
| Package Type | 672-BBGA FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Ball Pitch | 1.0 mm |
| I/O Type | Selectable user and dedicated I/O |
| Faixa de temperatura de operação | 0 C to 85 C |
| AEC-Q100 Qualification | Not applicable |
Guia de Configuração de Pinos do XC4VFX40-11FFG672C 27 mm x 27 mm
Configuração de pinos para XC4VFX40-11FFG672C (pacote 27 mm x 27 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC4VFX40-11FFG672C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC4VFX40-11FFG672C é adequado para 6 aplicaçãos: Industrial Control and Automation, High-Speed Data Acquisition, Communications Infrastructure, Test and Measurement, Embedded Signal Processing, Rapid Prototyping and R&D.
Industrial Control and Automation
The AMD XC4VFX40-11FFG672C fits machine-control and factory-automation systems that combine deterministic logic with parallel signal processing. Its 41,904 logic cells can host supervisory control, sequencing, communications, and diagnostics, while 352 dedicated multipliers support motion, filtering, and sensor-conditioning calculations. The device uses 90 nm CMOS and a 1.2 V core supply, allowing it to serve as the central programmable controller in a multi-domain industrial design. The commercial-grade variant is appropriate for systems whose ambient and board temperatures remain within 0 C to 85 C. Layout must preserve clean power distribution and separated routing for high-speed control, external memory, and industrial I/O, especially when the same board contains motor drivers, relays, or switching supplies.
Recomendado
High-Speed Data Acquisition
The XC4VFX40-11FFG672C can implement parallel acquisition pipelines because its 41,904 logic cells support wide datapaths and control sequencing. The 352 dedicated multipliers accelerate fixed-point filtering, correlation, interpolation, and calibration operations without forcing every calculation into general-purpose fabric. A 1.2 V core supply and 90 nm CMOS process place substantial parallel functionality in one 672-ball FCBGA device. Designers can partition the device among interface capture, digital filtering, buffering, and data formatting while using block memory for temporary samples. Practical designs must use the family documentation for supported memory interfaces, clocking topology, and I/O standards, and must match trace lengths and impedances so acquisition timing remains deterministic across temperature and process conditions.
Recomendado
Communications Infrastructure
XC4VFX40-11FFG672C is suitable for communications line cards, protocol adapters, and packet-processing modules that require parallel logic and dedicated DSP capability. The 41,904 logic cells can implement framing, queues, state machines, and multiple interface channels, while 352 multipliers accelerate transforms and gain-control calculations. Its -11 speed grade is appropriate when a design has established Virtex-4 timing targets, and the 672-BBGA package provides a high connection count for memory and high-speed I/O. In a communication product, keep clock and data lanes routed over continuous reference planes, control impedance through the board stack-up, and isolate external-interface return currents from sensitive core supplies. Final clock, transceiver, and memory limits must be checked against the exact Virtex-4 family data sheet.
Recomendado
Test and Measurement
The AMD XC4VFX40-11FFG672C supports programmable test and measurement instruments that need flexible sequencing, timing, and digital signal analysis in one device. Logic fabric can implement stimulus generation, response comparison, and instrument control, while the 352 multipliers accelerate filters, counters, and scaling operations. The 41,904-cell density permits multiple test channels or a combination of control, data acquisition, and communication functions. Its 90 nm FPGA architecture and 1.2 V core supply are well suited to established Virtex-4 laboratory platforms. Designers should use the exact AMD device pinout for clock, configuration, and I/O assignments, apply the recommended decoupling network, and preserve simulation and debug access during timing closure so a replacement board retains the same measurement behavior.
Recomendado
Embedded Signal Processing
The XC4VFX40-11FFG672C provides a practical partition for embedded DSP systems requiring both sequential control and parallel arithmetic. Its 352 dedicated multipliers can support fixed-point filtering, modulation, detection, and error-correction kernels, while 41,904 logic cells handle interfaces, buffering, state management, and system integration. Placing these functions in the 672-ball FCBGA device reduces board-level interconnect compared with separate DSP and logic components. The -11 grade supports designs with tighter timing requirements than the lower Virtex-4 speed grades, although final margins depend on routing, clocking, and the selected memory interface. Thermal planning should account for activity-dependent power in the fabric and DSP blocks, while PCB implementation should follow the manufacturer's decoupling and high-speed routing guidance.
Recomendado
Rapid Prototyping and R&D
The Virtex-4 FX architecture in XC4VFX40-11FFG672C makes the device useful for prototypes that combine evolving algorithms with substantial hardware parallelism. Its 41,904 logic cells and 352 multipliers let engineers prototype complete control, arithmetic, memory-management, and interface functions before deciding whether to migrate the design to ASIC or a newer FPGA. The mature 672-ball package also enables reuse of existing Virtex-4 boards during architecture evaluation. Engineers should preserve configuration files and constrain each engineering sample separately because device identifiers, speed grades, and package variants affect timing. When upgrading, recompile the complete project against the selected AMD device rather than treating the footprint as sufficient proof of functional equivalence.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC4VFX40-11FFG672C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC4VFX40-11FFG672I | XC4VFX40-12FFG672C | XC4VFX40-10FFG672C | XC4VFX60-11FFG672C | XC4VFX40-11FFG672CE |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 672-BBGA FCBGA | 672-BBGA FCBGA | 672-BBGA FCBGA | 672-BBGA FCBGA | 672-BBGA FCBGA | 672-BBGA FCBGA |
| Logic Cells | 41,904 cells | 41,904 cells | 41,904 cells | 41,904 cells | 56,880 cells | 41,904 cells |
| Speed Grade | -11 | -11 | -12 | -10 | -11 | -11 |
| Temperature Grade | Commercial grade, 0 C to 85 C | Industrial grade | Commercial grade, 0 C to 85 C | Commercial grade, 0 C to 85 C | Commercial grade | Extended-commercial grade |
| Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Principais diferenciais
- Balanced 41,904-cell density in the 672-ball package (vs XC4VFX60-11FFG672C)
- Direct commercial-to-industrial footprint substitution (vs XC4VFX40-11FFG672I)
- Mid-speed option retains identical logic and package resources (vs XC4VFX40-10FFG672C)
- Highest speed option among the same-density alternatives (vs XC4VFX40-12FFG672C)
Notas de projeto
Implement every supply rail required by the exact Virtex-4 device and package file, including core and I/O supplies, with regulators selected for the required voltage tolerance and transient response. Place high-frequency decoupling capacitors at the associated package balls and follow the AMD recommended-value and placement guidance. Keep switching-regulator loops and high-current return paths away from sensitive clock and configuration nets. Estimated: with a 1.2 V core supply, every 100 mA of core current corresponds to 120 mW of ideal conversion input before regulator loss; actual device dissipation also depends on logic activity.
Treat the 672-BBGA land pattern as a complete high-density routing problem rather than a generic BGA. The package uses a 1 mm ball pitch, so escape routing must be planned layer by layer with the manufacturer's recommended footprint and stack-up. Preserve short return paths for clocks, configuration signals, and high-speed interfaces, and avoid routing high-speed nets across split power or ground planes. Verify assembly, stencil, solder-paste, X-ray, and coplanarity requirements with the board fabricator before releasing the layout.
Use the AMD clocking and I/O guidance for the selected interface rather than copying clock topology from another FPGA family. Match trace lengths according to the target interface and board delay, provide clean reference planes, and control impedance through the fabrication stack-up. Configuration pins require attention to their prescribed pull-up, pull-down, or termination arrangements. After routing, run post-layout timing and signal-integrity sign-off against the selected -11, -10, or -12 speed-grade timing model.
Do not treat a shared package suffix as proof that every replacement is functionally equivalent. The -11, -10, and -12 parts differ in timing grade; the I suffix changes temperature qualification; and the FX60 increases logic capacity by approximately 35.8 percent. Before substitution, load the exact replacement identifier, recompile the complete project, compare timing and resource utilization, and regenerate the configuration bitstream. Also confirm that the original design does not depend on undocumented legacy-tool behavior.
Informações de conformidade
The available device documentation identifies the component as a commercial-grade FPGA but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements.