XC4VLX15-12FFG676C - Virtex-4 LX FPGA | AMD Xilinx
N.º da peça: XC4VLX15-12FFG676C ✗ Fim de vidaXC4VLX15-12FFG676C Visão geral
A field-programmable gate array, or FPGA, is a semiconductor whose digital functionality is configured after fabrication. FPGAs belong to the programmable-logic hierarchy, alongside CPLDs, and are used when engineers need adaptable parallel processing, high I/O density, or hardware acceleration without fabricating a custom ASIC. The Virtex-4 family was designed for communications, industrial control, instrumentation, networking, embedded processing, and other systems requiring configurable logic and substantial board-level integration.
The XC4VLX15-12FFG676C combines the Virtex-4 LX architecture with 320 programmable outputs and a 676-ball FCBGA package. Its package provides a high-density connection interface for systems that need many external signals. The -12 suffix denotes its speed grade within the Virtex-4 LX ordering system, while the FFG676 package code identifies the 676-ball fine-pitch BGA configuration. These device and package identifiers are essential when matching the correct footprint, memory interface requirements, and power characteristics.
FPGA performance depends on both the selected device and the completed design. The Virtex-4 LX architecture supports parallel datapaths that can accelerate tasks involving serial processing, fixed-function logic, or programmable signal generation. Designers evaluate clocking, pin assignments, memory bandwidth, and routing before implementation. For a production design, the complete AMD pinout and package files should be used to assign power, ground, configuration, clock, and user I/O balls without relying on a simplified distributor diagram.
Typical uses include communications equipment, industrial automation, test and measurement systems, network-interface designs, embedded control, and high-density signal processing. The FPGA can implement multiple concurrent pipelines where fixed-function processors would require several devices or extensive parallel hardware. A clocking architecture, power-distribution network, memory interface, and configuration scheme are normally tailored to the specific board rather than copied unchanged between applications.
PCB implementation should prioritize the manufacturer's package recommendations, especially for the dense 676-ball FCBGA footprint. Power and ground distribution require low-impedance planes or carefully designed pours, while decoupling must be placed close to the relevant supply balls. Differential clock and high-speed I/O routing also requires controlled impedance, continuous reference planes, and minimized stubs to reduce data-integrity risk.
This page combines the exact device identity, 320-output device information, 676-BBGA packaging, family-level guidance, drop-in comparison points, and practical implementation considerations. It is designed to help engineers identify the correct FPGA, compare compatible ordering codes, plan the board footprint, and assess whether the selected Virtex-4 LX device matches the required logic, I/O, and application environment.
Alternativas drop-in para XC4VLX15-12FFG676C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC4VLX15-12FFG676C (mesmo formato e footprint) — diferindo em Speed Grade, Device Type, Package, Process Technology, Architecture.
XC4VLX15-10FFG676C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VLX15-11FFG676C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VLX15-12FF676C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VLX15-10FF676C
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC4VLX15-12FFG676I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC4VLX15-12FFG676C Classificações máximas e características elétricas
| Device Type | Virtex-4 LX field-programmable gate array (FPGA) |
| Número de saídas | 320 outputs |
| Encapsulamento | 676-BBGA FCBGA |
| Package Ball Count | 676 balls |
| Speed Grade | -12 |
| Manufacturer | AMD / Xilinx |
| FPGA Architecture | Virtex-4 LX |
Guia de Configuração de Pinos do XC4VLX15-12FFG676C 676 balls
Configuração de pinos para XC4VLX15-12FFG676C (pacote 676 balls). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC4VLX15-12FFG676C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC4VLX15-12FFG676C é adequado para 6 aplicaçãos: Communications and Network Interface Equipment, Industrial Automation and Control, Test and Measurement Instrumentation, Embedded Signal Processing, Aerospace and Defense Control Systems, Data Acquisition and High-Speed Interface Consolidation.
Communications and Network Interface Equipment
The XC4VLX15-12FFG676C fits communications equipment requiring parallel programmable logic, a high pin count, and deterministic control of multiple interfaces. Its 320 outputs and 676-ball FCBGA package provide a dense platform for protocol conversion, packet routing, stream alignment, and clock-domain coordination. The -12 speed grade can offer additional timing margin in pipelines, although the actual throughput depends on the selected clocking scheme and routed design. Engineers should use the AMD pinout files to assign clocks, serial transceivers, control signals, and supplies without compromising the dense BGA escape routing.
Recomendado
Industrial Automation and Control
The XC4VLX15-12FFG676C is applicable to industrial automation systems that combine sequencing, data acquisition, communication, and real-time control in one programmable device. Its 320 outputs support dense connections to sensors, actuators, counters, and interface converters, while the -12 grade is useful when control logic must meet deterministic timing constraints. The design should partition real-time operations, supervisory communication, and diagnostics into independently timed logic domains. Before deployment, verify the exact operating-temperature rating, I/O voltage requirements, and isolation strategy because those limits determine whether the selected ordering code is suitable for the environment.
Recomendado
Test and Measurement Instrumentation
The XC4VLX15-12FFG676C can implement parallel acquisition, trigger sequencing, digital signal generation, and instrument-control functions in a configurable FPGA platform. Its high-output 676-ball package allows multiple data buses, clocks, status signals, and analog-interface controls to be connected without relying on several smaller programmable devices. The -12 speed grade is attractive for timing-sensitive trigger paths and wide synchronous interfaces. Practical implementation requires careful clock planning, registered I/O paths, controlled-impedance routing, and power-ground distribution that meets the manufacturer's guidance for this dense FCBGA package.
Recomendado
Embedded Signal Processing
The XC4VLX15-12FFG676C is suitable for parallel signal-processing engines such as filters, correlators, packet analyzers, and hardware accelerators. Independent pipelines can process samples or symbols concurrently, reducing dependence on sequential processor execution and providing deterministic latency. The -12 speed grade can improve available timing margin when arithmetic paths, memory interfaces, and clock constraints are demanding, although final performance comes from the synthesized architecture and physical implementation. Designers should evaluate internal memory resources, DSP usage, clock frequency, and external memory bandwidth against the device-specific documentation before committing to the part.
Recomendado
Aerospace and Defense Control Systems
The XC4VLX15-12FFG676C can be evaluated for mission-oriented control, telemetry, signal conditioning, and fault-monitoring systems where programmable logic provides parallelism and design adaptability. The high-density 676-ball package supports numerous control and data connections, while the -12 grade offers additional performance headroom for critical timing paths. Qualification for an aerospace or defense application must be established independently for the exact ordering code, including temperature grade, radiation performance, quality documentation, and export-control requirements. A standard-temperature or otherwise unqualified source variant should not be treated as interchangeable without formal program approval.
Recomendado
Data Acquisition and High-Speed Interface Consolidation
The XC4VLX15-12FFG676C is well suited to consolidating high-speed data acquisition, buffering, format conversion, and downstream interface logic in a single FPGA. Its 320 outputs permit multiple parallel channels, while the 676-ball package minimizes the need for external programmable logic or fixed-function interface devices. The -12 grade can help close timing on synchronous data paths when paired with disciplined clocking and registered I/O. Engineers must account for PCB loss, crosstalk, power integrity, and clock jitter, and should use manufacturer-controlled I/O standards and pin assignments rather than treating every available ball as electrically interchangeable.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC4VLX15-12FFG676C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC4VLX15-10FFG676C | XC4VLX15-11FFG676C | XC4VLX15-12FF676C | XC4VLX15-10FF676C | XC4VLX15-12FFG676I |
|---|---|---|---|---|---|---|
| Package | 676-BBGA FCBGA | 676-BBGA FCBGA | 676-BBGA FCBGA | 676-BBGA FCBGA | 676-BBGA FCBGA | 676-BBGA FCBGA |
| Brand | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Base Device | XC4VLX15 | XC4VLX15 | XC4VLX15 | XC4VLX15 | XC4VLX15 | XC4VLX15 |
| Speed Grade | -12 | -10 | -11 | -12 | -10 | -12 |
| Number of Outputs | 320 outputs | 320 outputs | 320 outputs | 320 outputs | 320 outputs | 320 outputs |
| Package Ordering Identifier | FFG676 | FFG676 | FFG676 | FF676 | FF676 | FFG676 |
| Quotation Status | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote |
Principais diferenciais
- Higher speed grade than the -10 alternative (vs XC4VLX15-10FFG676C)
- Improved timing margin over the -11 alternative (vs XC4VLX15-11FFG676C)
- Exact -12 and FFG676 configuration preserved (vs XC4VLX15-12FFG676I)
Notas de projeto
Implement the 676-BBGA footprint from the manufacturer's package drawing rather than from a generic BGA outline. Preserve the ball grid, solder-mask definition, paste-aperture recommendations, and exposed thermal or power-ball treatment exactly. Place decoupling capacitance close to the associated supply balls and provide continuous, low-impedance power and ground planes so switching activity in the FPGA does not create unacceptable voltage variation at the device.
Use AMD's Virtex-4 package pinout files to assign configuration, clock, serial, and user-I/O balls. Route clock networks first and preserve continuous reference planes beneath high-speed interfaces. Avoid stubs and unnecessary layer transitions, and apply manufacturer-recommended drive, slew, and termination arrangements to external signals. Differential pairs and length-sensitive interfaces should be reviewed after layout because package escape routing can materially affect timing and signal integrity.
Plan the power tree around the exact core and auxiliary voltage requirements identified for the selected ordering code. Separate noisy switching supplies from sensitive bias paths, use local bulk and high-frequency decoupling, and verify the assembled design against its worst-case load and temperature condition. Before schematic release, compare every rail and sequencing requirement with the device-specific documentation; family-level guidance alone is not sufficient for final power assignment.
Do not treat XC4VLX15-10FFG676C, XC4VLX15-11FFG676C, or another suffix variant as automatically equivalent without reviewing timing and environmental requirements. A lower speed grade can reduce timing margin, while a different package or temperature suffix can alter qualification, assembly, or environmental constraints. Record the exact ordering code in the schematic, bill of materials, and FPGA project constraints to prevent an unintended substitution during procurement or production.
Informações de conformidade
The exact compliance declarations for this mature ordering code were not stated in the cited manufacturer overview or product listings. Verify RoHS, REACH, lead-free, halogen-free, conflict-minerals, and any application-specific qualification directly with AMD before release.