XC4VLX15-12FFG676C - Virtex-4 LX FPGA | AMD Xilinx
MPN: XC4VLX15-12FFG676C ✗ 停產XC4VLX15-12FFG676C 概覽
A field-programmable gate array, or FPGA, is a semiconductor whose digital functionality is configured after fabrication. FPGAs belong to the programmable-logic hierarchy, alongside CPLDs, and are used when engineers need adaptable parallel processing, high I/O density, or hardware acceleration without fabricating a custom ASIC. The Virtex-4 family was designed for communications, industrial control, instrumentation, networking, embedded processing, and other systems requiring configurable logic and substantial board-level integration.
The XC4VLX15-12FFG676C combines the Virtex-4 LX architecture with 320 programmable outputs and a 676-ball FCBGA package. Its package provides a high-density connection interface for systems that need many external signals. The -12 suffix denotes its speed grade within the Virtex-4 LX ordering system, while the FFG676 package code identifies the 676-ball fine-pitch BGA configuration. These device and package identifiers are essential when matching the correct footprint, memory interface requirements, and power characteristics.
FPGA performance depends on both the selected device and the completed design. The Virtex-4 LX architecture supports parallel datapaths that can accelerate tasks involving serial processing, fixed-function logic, or programmable signal generation. Designers evaluate clocking, pin assignments, memory bandwidth, and routing before implementation. For a production design, the complete AMD pinout and package files should be used to assign power, ground, configuration, clock, and user I/O balls without relying on a simplified distributor diagram.
Typical uses include communications equipment, industrial automation, test and measurement systems, network-interface designs, embedded control, and high-density signal processing. The FPGA can implement multiple concurrent pipelines where fixed-function processors would require several devices or extensive parallel hardware. A clocking architecture, power-distribution network, memory interface, and configuration scheme are normally tailored to the specific board rather than copied unchanged between applications.
PCB implementation should prioritize the manufacturer's package recommendations, especially for the dense 676-ball FCBGA footprint. Power and ground distribution require low-impedance planes or carefully designed pours, while decoupling must be placed close to the relevant supply balls. Differential clock and high-speed I/O routing also requires controlled impedance, continuous reference planes, and minimized stubs to reduce data-integrity risk.
This page combines the exact device identity, 320-output device information, 676-BBGA packaging, family-level guidance, drop-in comparison points, and practical implementation considerations. It is designed to help engineers identify the correct FPGA, compare compatible ordering codes, plan the board footprint, and assess whether the selected Virtex-4 LX device matches the required logic, I/O, and application environment.
直接替換替代品,適用於 XC4VLX15-12FFG676C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC4VLX15-12FFG676C (相同外形與佔位) — 差異在於 Speed Grade, Device Type, Package, Process Technology, Architecture.
XC4VLX15-10FFG676C
✅ 直接替換聯絡詢價
查看資料表 →XC4VLX15-11FFG676C
✅ 直接替換聯絡詢價
查看資料表 →XC4VLX15-12FF676C
✅ 直接替換聯絡詢價
查看資料表 →XC4VLX15-10FF676C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC4VLX15-12FFG676I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC4VLX15-12FFG676C 最大額定值與電氣特性
| Device Type | Virtex-4 LX field-programmable gate array (FPGA) |
| 輸出數量 | 320 outputs |
| 封裝 | 676-BBGA FCBGA |
| Package Ball Count | 676 balls |
| Speed Grade | -12 |
| Manufacturer | AMD / Xilinx |
| FPGA Architecture | Virtex-4 LX |
XC4VLX15-12FFG676C 676 balls 腳位配置指南
XC4VLX15-12FFG676C(676 balls 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC4VLX15-12FFG676C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC4VLX15-12FFG676C 適用於 6 應用s: Communications and Network Interface Equipment, Industrial Automation and Control, Test and Measurement Instrumentation, Embedded Signal Processing, Aerospace and Defense Control Systems, Data Acquisition and High-Speed Interface Consolidation.
Communications and Network Interface Equipment
The XC4VLX15-12FFG676C fits communications equipment requiring parallel programmable logic, a high pin count, and deterministic control of multiple interfaces. Its 320 outputs and 676-ball FCBGA package provide a dense platform for protocol conversion, packet routing, stream alignment, and clock-domain coordination. The -12 speed grade can offer additional timing margin in pipelines, although the actual throughput depends on the selected clocking scheme and routed design. Engineers should use the AMD pinout files to assign clocks, serial transceivers, control signals, and supplies without compromising the dense BGA escape routing.
推薦
Industrial Automation and Control
The XC4VLX15-12FFG676C is applicable to industrial automation systems that combine sequencing, data acquisition, communication, and real-time control in one programmable device. Its 320 outputs support dense connections to sensors, actuators, counters, and interface converters, while the -12 grade is useful when control logic must meet deterministic timing constraints. The design should partition real-time operations, supervisory communication, and diagnostics into independently timed logic domains. Before deployment, verify the exact operating-temperature rating, I/O voltage requirements, and isolation strategy because those limits determine whether the selected ordering code is suitable for the environment.
推薦
Test and Measurement Instrumentation
The XC4VLX15-12FFG676C can implement parallel acquisition, trigger sequencing, digital signal generation, and instrument-control functions in a configurable FPGA platform. Its high-output 676-ball package allows multiple data buses, clocks, status signals, and analog-interface controls to be connected without relying on several smaller programmable devices. The -12 speed grade is attractive for timing-sensitive trigger paths and wide synchronous interfaces. Practical implementation requires careful clock planning, registered I/O paths, controlled-impedance routing, and power-ground distribution that meets the manufacturer's guidance for this dense FCBGA package.
推薦
Embedded Signal Processing
The XC4VLX15-12FFG676C is suitable for parallel signal-processing engines such as filters, correlators, packet analyzers, and hardware accelerators. Independent pipelines can process samples or symbols concurrently, reducing dependence on sequential processor execution and providing deterministic latency. The -12 speed grade can improve available timing margin when arithmetic paths, memory interfaces, and clock constraints are demanding, although final performance comes from the synthesized architecture and physical implementation. Designers should evaluate internal memory resources, DSP usage, clock frequency, and external memory bandwidth against the device-specific documentation before committing to the part.
推薦
Aerospace and Defense Control Systems
The XC4VLX15-12FFG676C can be evaluated for mission-oriented control, telemetry, signal conditioning, and fault-monitoring systems where programmable logic provides parallelism and design adaptability. The high-density 676-ball package supports numerous control and data connections, while the -12 grade offers additional performance headroom for critical timing paths. Qualification for an aerospace or defense application must be established independently for the exact ordering code, including temperature grade, radiation performance, quality documentation, and export-control requirements. A standard-temperature or otherwise unqualified source variant should not be treated as interchangeable without formal program approval.
推薦
Data Acquisition and High-Speed Interface Consolidation
The XC4VLX15-12FFG676C is well suited to consolidating high-speed data acquisition, buffering, format conversion, and downstream interface logic in a single FPGA. Its 320 outputs permit multiple parallel channels, while the 676-ball package minimizes the need for external programmable logic or fixed-function interface devices. The -12 grade can help close timing on synchronous data paths when paired with disciplined clocking and registered I/O. Engineers must account for PCB loss, crosstalk, power integrity, and clock jitter, and should use manufacturer-controlled I/O standards and pin assignments rather than treating every available ball as electrically interchangeable.
推薦
推薦產品摘要
工程參考資料,適用於 XC4VLX15-12FFG676C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC4VLX15-10FFG676C | XC4VLX15-11FFG676C | XC4VLX15-12FF676C | XC4VLX15-10FF676C | XC4VLX15-12FFG676I |
|---|---|---|---|---|---|---|
| Package | 676-BBGA FCBGA | 676-BBGA FCBGA | 676-BBGA FCBGA | 676-BBGA FCBGA | 676-BBGA FCBGA | 676-BBGA FCBGA |
| Brand | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Base Device | XC4VLX15 | XC4VLX15 | XC4VLX15 | XC4VLX15 | XC4VLX15 | XC4VLX15 |
| Speed Grade | -12 | -10 | -11 | -12 | -10 | -12 |
| Number of Outputs | 320 outputs | 320 outputs | 320 outputs | 320 outputs | 320 outputs | 320 outputs |
| Package Ordering Identifier | FFG676 | FFG676 | FFG676 | FF676 | FF676 | FFG676 |
| Quotation Status | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote |
主要差異化特點
- Higher speed grade than the -10 alternative (對比XC4VLX15-10FFG676C)
- Improved timing margin over the -11 alternative (對比XC4VLX15-11FFG676C)
- Exact -12 and FFG676 configuration preserved (對比XC4VLX15-12FFG676I)
設計說明
Implement the 676-BBGA footprint from the manufacturer's package drawing rather than from a generic BGA outline. Preserve the ball grid, solder-mask definition, paste-aperture recommendations, and exposed thermal or power-ball treatment exactly. Place decoupling capacitance close to the associated supply balls and provide continuous, low-impedance power and ground planes so switching activity in the FPGA does not create unacceptable voltage variation at the device.
Use AMD's Virtex-4 package pinout files to assign configuration, clock, serial, and user-I/O balls. Route clock networks first and preserve continuous reference planes beneath high-speed interfaces. Avoid stubs and unnecessary layer transitions, and apply manufacturer-recommended drive, slew, and termination arrangements to external signals. Differential pairs and length-sensitive interfaces should be reviewed after layout because package escape routing can materially affect timing and signal integrity.
Plan the power tree around the exact core and auxiliary voltage requirements identified for the selected ordering code. Separate noisy switching supplies from sensitive bias paths, use local bulk and high-frequency decoupling, and verify the assembled design against its worst-case load and temperature condition. Before schematic release, compare every rail and sequencing requirement with the device-specific documentation; family-level guidance alone is not sufficient for final power assignment.
Do not treat XC4VLX15-10FFG676C, XC4VLX15-11FFG676C, or another suffix variant as automatically equivalent without reviewing timing and environmental requirements. A lower speed grade can reduce timing margin, while a different package or temperature suffix can alter qualification, assembly, or environmental constraints. Record the exact ordering code in the schematic, bill of materials, and FPGA project constraints to prevent an unintended substitution during procurement or production.
合規資訊
The exact compliance declarations for this mature ordering code were not stated in the cited manufacturer overview or product listings. Verify RoHS, REACH, lead-free, halogen-free, conflict-minerals, and any application-specific qualification directly with AMD before release.