XC4VLX25-10SFG363I - 24,192-Cell Virtex-4 LX FPGA | Xilinx
N.º da peça: XC4VLX25-10SFG363I ✓ AtivoXC4VLX25-10SFG363I Visão geral
An FPGA is a reprogrammable semiconductor that combines configurable logic blocks, programmable interconnect, block memory, and dedicated digital signal processing resources on one device. The Virtex-4 LX platform belongs to the broader FPGA and programmable-logic hierarchy, allowing designers to implement parallel datapaths, control logic, protocol handling, and signal processing without the fixed function of an ASIC. The XC4VLX25 is positioned for communications, industrial control, networking, test equipment, and embedded signal-processing systems.
The device provides 2,688 logic blocks, 48 DSP48 slices, 240 user I/O channels, and 1,327,104 total RAM bits. Its 363-ball FCBGA footprint is approximately 17 mm by 17 mm. According to the AMD support cross-reference, fully footprint- and bitstream-compatible substitutions are limited to other XC4VLX25 devices using the same package with a different speed or temperature grade, making the package suffix a critical selection constraint.
The -10 speed grade provides a practical balance between performance and operating characteristics for designs that do not require the -11 or -12 grades. The internal operating supply is listed as 1.2 V, while the I/O and auxiliary supply requirements are defined in the family documentation. The 90 nm CMOS architecture supports clocked logic, distributed RAM, block RAM, DSP pipelines, and programmable I/O standards determined by board-level design and the selected I/O supply.
Typical uses include telecommunications line-card interfaces, industrial networking equipment, video-processing pipelines, radar and test instrumentation, and high-throughput data acquisition. The 48 DSP48 slices allow filters, correlators, FFT pipeline stages, and fixed-point multiply-accumulate operations to be implemented in parallel. The 240 user I/Os provide parallel connectivity for high-speed transceivers, memory interfaces, clocks, and control signals.
Board design requires careful decoupling of the core and auxiliary supplies, controlled clock distribution, and verification that the selected I/O voltage and standards match attached devices. A 363-ball BGA also requires an assembly process with suitable stencil, solder-paste, and thermal-management practices to achieve reliable joint formation.
This page consolidates package, resource, and lifecycle information with same-footprint upgrade guidance, engineering design notes, and direct comparisons among speed- and temperature-grade alternatives. It is intended to shorten the selection path between the exact ordered MPN, a compatible engineering upgrade, and a board-level redesign that requires a different package.
Alternativas drop-in para XC4VLX25-10SFG363I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC4VLX25-10SFG363I (mesmo formato e footprint) — diferindo em Package, Logic Cells, Speed Grade, Temperature Grade, Device Type.
XC4VLX25-11SF363I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VLX25-12SF363C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VLX25-11SFG363I
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC4VLX25-12SFG363I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC4VLX25-10SFG363C
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC4VLX25-10SF363I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VLX25-10SFG363I Classificações máximas e características elétricas
| Device Type | Virtex-4 LX Field-Programmable Gate Array (FPGA) |
| Logic Cells | 24,192 cells |
| Logic Blocks | 2,688 CLBs |
| Block RAM | 1,327,104 bits |
| DSP48 Slices | 48 slices |
| User I/Os | 240 I/Os |
| Maximum Internal Frequency | 1028 MHz |
| Process Technology | 90 nm CMOS |
| Internal Core Supply Voltage | 1.2 V |
| Speed Grade | -10 |
| Temperature Grade | Industrial, -40°C to 100°C junction temperature |
| Encapsulamento | 363-ball FCBGA, approximately 17 mm × 17 mm |
| Terminal Count | 363 terminals |
| Tipo de montagem | Surface mount |
| Terminal Finish | Pb-free |
| Status RoHS | Compliant |
| Programmable Logic | Configurable logic blocks with programmable interconnect |
| Programming Support | Xilinx configuration and bitstream tools |
Guia de Configuração de Pinos do XC4VLX25-10SFG363I 363-ball fcbga, approximately 17 mm × 17 mm
Configuração de pinos para XC4VLX25-10SFG363I (pacote 363-ball fcbga, approximately 17 mm × 17 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC4VLX25-10SFG363I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC4VLX25-10SFG363I é adequado para 6 aplicaçãos: Telecommunications Line-Card Interface, Industrial Network Processing, Digital Signal Processing Pipeline, Video and Image Processing, Test and Measurement Equipment, Aerospace Ground-Support Systems.
Telecommunications Line-Card Interface
The XC4VLX25-10SFG363I fits telecommunications line-card designs requiring parallel packet handling, clock-domain logic, and moderate DSP capacity. Its 2,688 configurable logic blocks and 240 user I/Os support framing, protocol termination, traffic management, and transceiver interfaces, while 48 DSP48 slices can implement filtering or rate-conversion functions. The 1028 MHz listed internal frequency supports demanding clocked pipelines. A 363-ball FCBGA keeps the high pin count manageable, although controlled clock distribution and multi-supply decoupling are essential for deterministic performance.
Recomendado
Industrial Network Processing
For industrial switches, protocol analyzers, and network interface modules, the XC4VLX25-10SFG363I provides a strong balance of logic density, block RAM, and I/O bandwidth. The 24,192 logic cells can host packet classification, queue management, and header parsing, while 1,327,104 RAM bits support buffering and lookup tables. Its -40°C to 100°C junction-temperature rating suits industrial environments. Designers should reserve parallel lanes for high-speed links and use the 48 DSP48 slices for hashing, filtering, or traffic-analysis arithmetic.
Recomendado
Digital Signal Processing Pipeline
The XC4VLX25-10SFG363I is suitable for parallel filtering, correlation, digital conversion, and FFT-style pipelines because it combines 48 DSP48 slices with 2,688 logic blocks. A designer can distribute multiple independent channels across the DSP array and use block RAM for coefficient storage, buffering, and line delays. The listed 1028 MHz internal operating frequency enables deeply pipelined arithmetic stages. Because power and temperature rise with faster speed grades, start timing and thermal analysis with the -10 version rather than assuming a higher grade will remain thermally neutral.
Recomendado
Video and Image Processing
The XC4VLX25-10SFG363I can consolidate multi-stage image pipelines that require parallel pixel transport, frame-line memory, and arithmetic processing. Its 1,327,104 RAM bits hold multiple scan lines or lookup tables, and 240 I/Os provide the parallel connectivity commonly needed by video capture, scaling, and color-processing engines. DSP48 slices can accelerate multiply-accumulate stages such as convolution, interpolation, or filtering. Board-level planning should account for the 17 mm square FCBGA, high escape-routing density, and the thermal effect of sustained parallel logic activity.
Recomendado
Test and Measurement Equipment
Precision test, measurement, and instrumentation systems benefit from the XC4VLX25-10SFG363I when multiple channels, timing engines, and data-processing functions must operate concurrently. The 2,688 logic blocks can implement acquisition sequencing and control, the 48 DSP48 slices can accelerate calibration arithmetic, and block RAM supports capture buffers and correlation functions. Its 240 user I/Os provide enough parallel access for multi-channel front ends. The industrial temperature rating supports use in controlled but demanding equipment, while the BGA package requires careful thermal and assembly planning.
Recomendado
Aerospace Ground-Support Systems
The XC4VLX25-10SFG363I is appropriate for ground-based aerospace test and control systems that need flexible parallel logic without the complexity of a custom ASIC. Its programmable resources can implement telemetry decoding, redundant channel monitoring, timing generation, and functional checks, while the DSP48 array supports filtering and correlation. The industrial temperature grade covers many controlled ground installations, but system-level thermal qualification remains necessary. Because this is a 90 nm Virtex-4 device, confirm supply continuity, software-tool availability, and long-term obsolescence plans during platform selection.
Recomendado
Dados de referência de engenharia para XC4VLX25-10SFG363I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC4VLX25-11SF363I | XC4VLX25-12SF363C | XC4VLX25-11SFG363I | XC4VLX25-12SFG363I | XC4VLX25-10SFG363C | XC4VLX25-10SF363I |
|---|---|---|---|---|---|---|---|
| Package | 363-ball FCBGA | 363-ball FCBGA | 363-ball FCBGA | 363-ball FCBGA | 363-ball FCBGA | 363-ball FCBGA | 363-ball FCBGA |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Speed Grade | -10 | -11 | -12 | -11 | -12 | -10 | -10 |
| Temperature Grade | Industrial | Industrial | Commercial | Industrial | Industrial | Commercial | Industrial |
| Logic Cells | 24,192 | 24,192 | 24,192 | 24,192 | 24,192 | 24,192 | 24,192 |
| DSP48 Slices | 48 | 48 | 48 | 48 | 48 | 48 | 48 |
| User I/Os | 240 | 240 | 240 | 240 | 240 | 240 | 240 |
| Block RAM | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Internal Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Principais diferenciais
- Retains the complete XC4VLX25 resource complement across compatible order codes (vs XC4VLX25-11SF363I)
- Direct footprint-compatible speed upgrade path (vs XC4VLX25-12SFG363I)
- Industrial-temperature coverage with lead-free ordering code (vs XC4VLX25-10SFG363C)
Notas de projeto
Implement the core and auxiliary supplies as separate, well-decoupled networks, following the device power-supply recommendations in the family datasheet. Place the smallest bypass capacitors directly at the relevant supply balls and connect each capacitor's ground to a low-impedance plane region. Because a faster XC4VLX25 speed grade can increase dynamic power, repeat power and thermal analysis whenever the ordering code changes from -10 to -11 or -12.
Estimate worst-case FPGA junction temperature before release by combining board thermal resistance, ambient temperature, and calculated device power. The 363-ball FCBGA offers many thermal and power-plane connections, so a small exposed area can cause a sharp temperature rise. Use via arrays under the device where the package and board design permit, avoid blocking airflow beneath the BGA, and validate the assembled board with thermal imaging or junction-temperature measurement.
Treat the 363-ball package as a high-density escape-routing problem. Follow the manufacturer reference-design stack-up and fanout guidance, maintain continuous power and ground planes, and preserve the package's thermal-via pattern. Validate solder-paste volume, stencil aperture ratios, reflow profile, and X-ray inspection requirements with the board assembler. Package suffixes such as SFG and SF identify ordering details that must match the exact assembly drawing.
Distribute clocks through low-skew routing or a dedicated clock network and verify the complete source-to-pin-to-pin path with post-layout timing analysis. Keep high-speed outputs away from sensitive input references, use controlled impedance for external interfaces, and follow the selected I/O standard's bias and termination requirements. Because grade substitutions preserve the footprint but change timing margin, rerun static timing and signal-integrity sign-off for every approved alternative.
Informações de conformidade
The product is identified as Pb-free and RoHS compliant. REACH, halogen-free status, and conflict-minerals declarations are not confirmed in the available product information.