XC4VLX25-10SFG363I - 24,192-Cell Virtex-4 LX FPGA | Xilinx
部品番号: XC4VLX25-10SFG363I ✓ 生産中XC4VLX25-10SFG363I 概要
An FPGA is a reprogrammable semiconductor that combines configurable logic blocks, programmable interconnect, block memory, and dedicated digital signal processing resources on one device. The Virtex-4 LX platform belongs to the broader FPGA and programmable-logic hierarchy, allowing designers to implement parallel datapaths, control logic, protocol handling, and signal processing without the fixed function of an ASIC. The XC4VLX25 is positioned for communications, industrial control, networking, test equipment, and embedded signal-processing systems.
The device provides 2,688 logic blocks, 48 DSP48 slices, 240 user I/O channels, and 1,327,104 total RAM bits. Its 363-ball FCBGA footprint is approximately 17 mm by 17 mm. According to the AMD support cross-reference, fully footprint- and bitstream-compatible substitutions are limited to other XC4VLX25 devices using the same package with a different speed or temperature grade, making the package suffix a critical selection constraint.
The -10 speed grade provides a practical balance between performance and operating characteristics for designs that do not require the -11 or -12 grades. The internal operating supply is listed as 1.2 V, while the I/O and auxiliary supply requirements are defined in the family documentation. The 90 nm CMOS architecture supports clocked logic, distributed RAM, block RAM, DSP pipelines, and programmable I/O standards determined by board-level design and the selected I/O supply.
Typical uses include telecommunications line-card interfaces, industrial networking equipment, video-processing pipelines, radar and test instrumentation, and high-throughput data acquisition. The 48 DSP48 slices allow filters, correlators, FFT pipeline stages, and fixed-point multiply-accumulate operations to be implemented in parallel. The 240 user I/Os provide parallel connectivity for high-speed transceivers, memory interfaces, clocks, and control signals.
Board design requires careful decoupling of the core and auxiliary supplies, controlled clock distribution, and verification that the selected I/O voltage and standards match attached devices. A 363-ball BGA also requires an assembly process with suitable stencil, solder-paste, and thermal-management practices to achieve reliable joint formation.
This page consolidates package, resource, and lifecycle information with same-footprint upgrade guidance, engineering design notes, and direct comparisons among speed- and temperature-grade alternatives. It is intended to shorten the selection path between the exact ordered MPN, a compatible engineering upgrade, and a board-level redesign that requires a different package.
ドロップイン代替品: XC4VLX25-10SFG363I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC4VLX25-10SFG363I (同一形状・フットプリント) — 相違点: Package, Logic Cells, Speed Grade, Temperature Grade, Device Type.
XC4VLX25-11SF363I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX25-12SF363C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX25-11SFG363I
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC4VLX25-12SFG363I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC4VLX25-10SFG363C
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC4VLX25-10SF363I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX25-10SFG363I 最大定格&電気的特性
| Device Type | Virtex-4 LX Field-Programmable Gate Array (FPGA) |
| Logic Cells | 24,192 cells |
| Logic Blocks | 2,688 CLBs |
| Block RAM | 1,327,104 bits |
| DSP48 Slices | 48 slices |
| User I/Os | 240 I/Os |
| Maximum Internal Frequency | 1028 MHz |
| Process Technology | 90 nm CMOS |
| Internal Core Supply Voltage | 1.2 V |
| Speed Grade | -10 |
| Temperature Grade | Industrial, -40°C to 100°C junction temperature |
| パッケージ | 363-ball FCBGA, approximately 17 mm × 17 mm |
| Terminal Count | 363 terminals |
| 実装タイプ | Surface mount |
| Terminal Finish | Pb-free |
| RoHS ステータス | Compliant |
| Programmable Logic | Configurable logic blocks with programmable interconnect |
| Programming Support | Xilinx configuration and bitstream tools |
XC4VLX25-10SFG363I 363-ball fcbga, approximately 17 mm × 17 mm ピン配置ガイド
XC4VLX25-10SFG363I (363-ball fcbga, approximately 17 mm × 17 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC4VLX25-10SFG363I.
詳細は データシート をご参照ください。
主な用途
XC4VLX25-10SFG363I の用途: 6 件s: Telecommunications Line-Card Interface, Industrial Network Processing, Digital Signal Processing Pipeline, Video and Image Processing, Test and Measurement Equipment, Aerospace Ground-Support Systems.
Telecommunications Line-Card Interface
The XC4VLX25-10SFG363I fits telecommunications line-card designs requiring parallel packet handling, clock-domain logic, and moderate DSP capacity. Its 2,688 configurable logic blocks and 240 user I/Os support framing, protocol termination, traffic management, and transceiver interfaces, while 48 DSP48 slices can implement filtering or rate-conversion functions. The 1028 MHz listed internal frequency supports demanding clocked pipelines. A 363-ball FCBGA keeps the high pin count manageable, although controlled clock distribution and multi-supply decoupling are essential for deterministic performance.
おすすめ
Industrial Network Processing
For industrial switches, protocol analyzers, and network interface modules, the XC4VLX25-10SFG363I provides a strong balance of logic density, block RAM, and I/O bandwidth. The 24,192 logic cells can host packet classification, queue management, and header parsing, while 1,327,104 RAM bits support buffering and lookup tables. Its -40°C to 100°C junction-temperature rating suits industrial environments. Designers should reserve parallel lanes for high-speed links and use the 48 DSP48 slices for hashing, filtering, or traffic-analysis arithmetic.
おすすめ
Digital Signal Processing Pipeline
The XC4VLX25-10SFG363I is suitable for parallel filtering, correlation, digital conversion, and FFT-style pipelines because it combines 48 DSP48 slices with 2,688 logic blocks. A designer can distribute multiple independent channels across the DSP array and use block RAM for coefficient storage, buffering, and line delays. The listed 1028 MHz internal operating frequency enables deeply pipelined arithmetic stages. Because power and temperature rise with faster speed grades, start timing and thermal analysis with the -10 version rather than assuming a higher grade will remain thermally neutral.
おすすめ
Video and Image Processing
The XC4VLX25-10SFG363I can consolidate multi-stage image pipelines that require parallel pixel transport, frame-line memory, and arithmetic processing. Its 1,327,104 RAM bits hold multiple scan lines or lookup tables, and 240 I/Os provide the parallel connectivity commonly needed by video capture, scaling, and color-processing engines. DSP48 slices can accelerate multiply-accumulate stages such as convolution, interpolation, or filtering. Board-level planning should account for the 17 mm square FCBGA, high escape-routing density, and the thermal effect of sustained parallel logic activity.
おすすめ
Test and Measurement Equipment
Precision test, measurement, and instrumentation systems benefit from the XC4VLX25-10SFG363I when multiple channels, timing engines, and data-processing functions must operate concurrently. The 2,688 logic blocks can implement acquisition sequencing and control, the 48 DSP48 slices can accelerate calibration arithmetic, and block RAM supports capture buffers and correlation functions. Its 240 user I/Os provide enough parallel access for multi-channel front ends. The industrial temperature rating supports use in controlled but demanding equipment, while the BGA package requires careful thermal and assembly planning.
おすすめ
Aerospace Ground-Support Systems
The XC4VLX25-10SFG363I is appropriate for ground-based aerospace test and control systems that need flexible parallel logic without the complexity of a custom ASIC. Its programmable resources can implement telemetry decoding, redundant channel monitoring, timing generation, and functional checks, while the DSP48 array supports filtering and correlation. The industrial temperature grade covers many controlled ground installations, but system-level thermal qualification remains necessary. Because this is a 90 nm Virtex-4 device, confirm supply continuity, software-tool availability, and long-term obsolescence plans during platform selection.
おすすめ
エンジニアリング参考データ: XC4VLX25-10SFG363I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC4VLX25-11SF363I | XC4VLX25-12SF363C | XC4VLX25-11SFG363I | XC4VLX25-12SFG363I | XC4VLX25-10SFG363C | XC4VLX25-10SF363I |
|---|---|---|---|---|---|---|---|
| Package | 363-ball FCBGA | 363-ball FCBGA | 363-ball FCBGA | 363-ball FCBGA | 363-ball FCBGA | 363-ball FCBGA | 363-ball FCBGA |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Speed Grade | -10 | -11 | -12 | -11 | -12 | -10 | -10 |
| Temperature Grade | Industrial | Industrial | Commercial | Industrial | Industrial | Commercial | Industrial |
| Logic Cells | 24,192 | 24,192 | 24,192 | 24,192 | 24,192 | 24,192 | 24,192 |
| DSP48 Slices | 48 | 48 | 48 | 48 | 48 | 48 | 48 |
| User I/Os | 240 | 240 | 240 | 240 | 240 | 240 | 240 |
| Block RAM | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Internal Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
主な差別化要因
- Retains the complete XC4VLX25 resource complement across compatible order codes (vs XC4VLX25-11SF363I)
- Direct footprint-compatible speed upgrade path (vs XC4VLX25-12SFG363I)
- Industrial-temperature coverage with lead-free ordering code (vs XC4VLX25-10SFG363C)
設計ノート
Implement the core and auxiliary supplies as separate, well-decoupled networks, following the device power-supply recommendations in the family datasheet. Place the smallest bypass capacitors directly at the relevant supply balls and connect each capacitor's ground to a low-impedance plane region. Because a faster XC4VLX25 speed grade can increase dynamic power, repeat power and thermal analysis whenever the ordering code changes from -10 to -11 or -12.
Estimate worst-case FPGA junction temperature before release by combining board thermal resistance, ambient temperature, and calculated device power. The 363-ball FCBGA offers many thermal and power-plane connections, so a small exposed area can cause a sharp temperature rise. Use via arrays under the device where the package and board design permit, avoid blocking airflow beneath the BGA, and validate the assembled board with thermal imaging or junction-temperature measurement.
Treat the 363-ball package as a high-density escape-routing problem. Follow the manufacturer reference-design stack-up and fanout guidance, maintain continuous power and ground planes, and preserve the package's thermal-via pattern. Validate solder-paste volume, stencil aperture ratios, reflow profile, and X-ray inspection requirements with the board assembler. Package suffixes such as SFG and SF identify ordering details that must match the exact assembly drawing.
Distribute clocks through low-skew routing or a dedicated clock network and verify the complete source-to-pin-to-pin path with post-layout timing analysis. Keep high-speed outputs away from sensitive input references, use controlled impedance for external interfaces, and follow the selected I/O standard's bias and termination requirements. Because grade substitutions preserve the footprint but change timing margin, rerun static timing and signal-integrity sign-off for every approved alternative.
コンプライアンス情報
The product is identified as Pb-free and RoHS compliant. REACH, halogen-free status, and conflict-minerals declarations are not confirmed in the available product information.