XC5VSX35T-1FFG665I - 34,816-Cell SXT FPGA | AMD
N.º da peça: XC5VSX35T-1FFG665I ✗ Fim de vidaXC5VSX35T-1FFG665I Visão geral
A field-programmable gate array is a programmable-logic device whose digital functions are configured after manufacture. Within the semiconductor hierarchy, an FPGA integrates configurable logic blocks, programmable interconnect, block RAM, dedicated processing resources, and user I/O on one monolithic device. Virtex-5 SXT devices extend that architecture with scalable DSP resources for signal processing and high-speed connectivity for communications and data acquisition.
The XC5VSX35T combines 34,816 logic cells with 2,720 logic and arithmetic blocks and 3,096,576 bits of RAM. Its 360 user I/O provide substantial connectivity for parallel buses, high-speed transceivers, memory interfaces, and external control logic. A 65 nm process node and 1 V core supply place the device in the classic high-performance FPGA generation used where deterministic parallel processing and abundant routing resources matter more than minimal power consumption.
The SXT architecture is particularly suited to digital signal processing, communications, test equipment, industrial control, and defense-oriented signal-chain designs. Parallel lookup tables and configurable DSP blocks can implement filters, correlation, transforms, and protocol handling, while dedicated block RAM supports buffering and data alignment. The large pin count also enables dense, high-speed board designs without an external lane-signal-conditioning hierarchy.
Typical uses include radar and communications processing, video and image pipelines, high-speed test and measurement systems, semiconductor test equipment, and industrial data-acquisition platforms. Designers normally pair this programmable logic with external DDR memory, clock-generation devices, high-speed transceivers, and fixed-function controllers when the complete system exceeds the FPGA's internal resources.
The primary design consideration is power and thermal planning. Even with a 1 V core, the 665-pin FCBGA can dissipate substantial power when large portions of the logic array, RAM, and DSP resources operate concurrently. Use conservative clocking, disable unused blocks, follow the device power-estimation methodology, and provide dense copper heat-spreading paths on multilayer boards. Confirm every high-speed board-routing rule against the AMD pinout and PCB design guidance.
This page consolidates device identity, package details, verified resource counts, orderable alternatives, and practical implementation guidance into one engineering reference. It is intended to accelerate design review while directing procurement, footprint verification, thermal analysis, and PCB layout to the appropriate AMD documentation.
Alternativas drop-in para XC5VSX35T-1FFG665I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC5VSX35T-1FFG665I (mesmo formato e footprint) — diferindo em Package, Mounting Type, Device Type, Process Technology, User I/O.
XC5VSX35T-2FFG665I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC5VSX35T-1FFG665C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC5VSX35T-1FF665I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC5VSX35T-1FF665C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC5VSX35T-X1FFG665C
✅ Drop-InConsulte o preço
XC5VSX35T-1FFG665I Classificações máximas e características elétricas
| Device Type | Virtex-5 SXT Field-Programmable Gate Array |
| Logic Cells | 34,816 cells |
| Logic and Arithmetic Blocks | 2,720 LABs/CLBs |
| Block RAM | 3,096,576 bits |
| User I/O | 360 pins |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V |
| Package Type | 665-pin FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Tipo de montagem | Surface Mount |
| Programmable Logic Technology | 65 nm FPGA |
Guia de Configuração de Pinos do XC5VSX35T-1FFG665I 27 mm x 27 mm
Configuração de pinos para XC5VSX35T-1FFG665I (pacote 27 mm x 27 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC5VSX35T-1FFG665I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC5VSX35T-1FFG665I é adequado para 6 aplicaçãos: Communications and Packet Processing, Digital Signal Processing, Industrial Data Acquisition, Test and Measurement Equipment, Radar and Sensor Processing, High-Speed Network Interface.
Communications and Packet Processing
The XC5VSX35T-1FFG665I fits communications equipment that requires wide parallel data paths and deterministic hardware-level processing. Its 34,816 logic cells and 2,720 logic and arithmetic blocks can implement protocol engines, framing logic, queues, and packet filters in parallel. The 360 user I/O allow high-density connections to external transceivers and memory when the internal routing cannot satisfy the interface width. The 65 nm SXT architecture favors sustained parallel throughput over power-minimized designs.
Recomendado
Digital Signal Processing
The XC5VSX35T-1FFG665I is appropriate for filtering, correlation, waveform generation, and other parallel signal-processing tasks. Its SXT architecture provides configurable arithmetic resources alongside general logic, allowing multiple processing lanes to operate concurrently. A 3,096,576-bit block-RAM pool supports sample buffering, coefficient storage, and channel alignment, while 360 user I/O provide parallel data and control connections. Design the clocking tree carefully because aggregate power and thermal load rise as more arithmetic resources are activated.
Recomendado
Industrial Data Acquisition
The XC5VSX35T-1FFG665I can serve as the central acquisition and conditioning device in industrial measurement systems. Its 360 user I/O provide broad parallel connectivity for multiplexers, analog front ends, counters, and timing channels, while the large logic array supports real-time sampling control and data formatting. The 1 V core and 65 nm implementation suit systems that require substantial programmable logic around multiple acquisition channels. Thermal analysis should reflect sustained high switching activity across the large device.
Recomendado
Test and Measurement Equipment
The XC5VSX35T-1FFG665I is well suited to modular test equipment that combines pattern generation, timing control, and analysis in one programmable device. The 34,816 logic cells can implement substantial test sequences and control logic, while 3,096,576 bits of block RAM provide local buffering for captured waveforms. Its 360 I/O allow direct connection to device-under-test fixtures and low-latency acquisition hardware. Clock skew, I/O timing, and power behavior must be validated across the complete instrumentation architecture.
Recomendado
Radar and Sensor Processing
The XC5VSX35T-1FFG665I supports radar, sonar, and sensor-fusion designs that require parallel sampling and substantial on-device processing. SXT arithmetic resources can accelerate filtering, detection, and beam-related calculations, while block RAM accommodates high-rate sample windows. The 360 user I/O make the device suitable for connecting multiple converters, timing units, and external memory interfaces. System timing must be closed against the selected I/O standard, and the final thermal design should account for continuous operation in compact sensor housings.
Recomendado
High-Speed Network Interface
The XC5VSX35T-1FFG665I can implement high-throughput network termination, protocol conversion, and traffic-processing functions when the design requires extensive parallel logic around external line-rate devices. Its 360 user I/O permit wide buses for transmitting and receiving data, while the logic array supports headers, checksums, queues, and flow control. The 1 V core and 65 nm process support the device's legacy high-performance positioning. Board-level signal integrity, power integrity, and transceiver interface constraints remain more important than logic-cell count alone.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC5VSX35T-1FFG665I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC5VSX35T-2FFG665I | XC5VSX35T-1FFG665C | XC5VSX35T-1FF665I | XC5VSX35T-1FF665C | XC5VSX35T-X1FFG665C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA |
| Device Family | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT |
| User I/O | 360 pins | 360 pins | 360 pins | 360 pins | 360 pins | 360 pins |
| Ordering-Grade Suffix | -1FFG665I | -2FFG665I | -1FFG665C | -1FF665I | -1FF665C | -X1FFG665C |
| Temperature Grade | Industrial suffix I | Industrial suffix I | Commercial suffix C | Industrial suffix I | Commercial suffix C | Commercial suffix C |
Principais diferenciais
- Industrial-grade ordering option in the mature Virtex-5 SXT family (vs XC5VSX35T-1FFG665C)
- Established -1 speed-grade ordering code (vs XC5VSX35T-2FFG665I)
- High-density SXT resource complement for parallel signal processing (vs XC5VSX35T-1FF665I)
Notas de projeto
Power estimation for the XC5VSX35T-1FFG665I must reflect the configured design rather than a single average device value. Analyze logic, block RAM, DSP, and I/O activity together, then apply the vendor-recommended activity and temperature factors. The 665-pin FCBGA needs dense copper spreading beneath the device and a multilayer board capable of removing heat under sustained operation. Validate the result with a thermal model and measured junction temperature.
Do not begin the board layout from a generic 665-ball symbol. Assign every power, ground, configuration, clock, and user signal from the AMD pinout and package-specific escape-routing guidance. Decoupling capacitance and placement must follow the device-specific power-distribution recommendations. The 27 mm x 27 mm FCBGA also demands careful escape routing, via arrays, and assembly-process capability for reliable ball attachment and inspection.
Use the device power-management and clock-control features to hold unused logic, RAM, and DSP resources in low-activity states. Avoid leaving unneeded logic optimized for speed when the design does not require it, since dynamic power can rise sharply with switching activity. Sequence rails during startup and verify each rail's ramp rate and tolerance against the AMD power-sequencing requirements before attaching external loads.
Close timing with the exact I/O standard and board topology selected for each external interface. The 360 user I/O offer substantial connectivity, but parallel interfaces can still be limited by package escape routes, PCB loss, clock skew, and external device timing. Use the vendor pinout and PCB design guidelines to define topology, matching, and via structures, and validate high-speed channels with physical-layer simulation before fabrication.
Informações de conformidade
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code. Automotive qualification is not indicated by the ordering code and must be confirmed separately.