XC6SLX16-N3CSG324C - Spartan-6 LX FPGA, 14579 Cells | AMD
N.º da peça: XC6SLX16-N3CSG324C ✓ AtivoXC6SLX16-N3CSG324C Visão geral
A field-programmable gate array is a semiconductor in which digital logic, memory, and configurable I/O blocks are programmed after fabrication. A programmable logic device sits above basic logic primitives and below more complex processors and programmable systems-on-chip. Spartan-6 LX devices provide a practical platform for control logic, interface bridging, data acquisition, embedded signal processing, and system integration without requiring a custom ASIC.
The principal device resources are 14,579 logic cells and 589,824 RAM bits, distributed across 1,139 configurable logic blocks or LABs according to the product listing. The package exposes 232 user I/O, supporting high pin-count board-level connectivity in a 15 mm by 15 mm CSBGA. The device uses 45 nm technology and a 1.2 V core voltage, placing it in the low-voltage programmable-logic segment.
The -3 designation identifies a high-performance speed grade, while the N portion distinguishes the -3N option documented for Spartan-6 LX devices. This distinction matters during timing closure because internal and I/O timing characteristics depend on the selected speed grade. Designs should therefore use the AMD Spartan-6 FPGA Data Sheet DS162 and the corresponding timing model rather than treating -2 and -3N devices as timing-identical.
Typical applications include industrial control, automated test equipment, data-acquisition systems, communications-interface consolidation, embedded instrumentation, and legacy platform refreshes. The Spartan-6 architecture is particularly useful when fixed-function logic must be updated through programmable logic, when several interfaces must be consolidated, or when a compact controller must combine sequential control with moderate on-chip memory.
Board design must account for the 324-ball BGA footprint, multilayer-routing requirements, high-speed differential pairs, power decoupling, configuration-memory support, and thermal performance. Use AMD package pinout files and the CSG324 package drawing to assign every ball and PCB footprint. Before substituting another device, verify that it belongs to the Spartan-6 LX family, uses the CSG324 package, and meets the required speed, temperature, resource, and timing constraints.
This product page organizes the XC6SLX16-N3CSG324C resource summary, package information, compatible alternatives, selection guidance, and practical FPGA design notes. It is intended to support design review and sourcing while keeping every engineering conclusion traceable to AMD documentation or an established package-compatible device family.
Alternativas drop-in para XC6SLX16-N3CSG324C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC6SLX16-N3CSG324C (mesmo formato e footprint) — diferindo em Package, Lead-Free Status, Operating Temperature, Device Type, Speed Grade.
XC6SLX16-2CSG324C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX16-2CSG324I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX16-3CSG324C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX16-3CSG324I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX16-N3CSG324C Classificações máximas e características elétricas
| Device Type | Spartan-6 LX field-programmable gate array |
| Logic Cells | 14,579 cells |
| Logic Blocks | 1,139 LABs/CLBs |
| Total RAM | 589,824 bits |
| User I/O | 232 I/O |
| Core Supply Voltage | 1.2 V |
| Process Technology | 45 nm |
| Speed Grade | -3N |
| Encapsulamento | 324-pin CSBGA |
| Package Dimensions | 15 mm x 15 mm |
| Package Type | CSPBGA/LFBGA |
| Tipo de montagem | Surface mount |
| Temperatura de operação | 0°C to +85°C junction temperature |
| Lead-Free Status | Lead-free package |
| Status RoHS | Compliant |
| Package Pin Count | 324 balls |
Guia de Configuração de Pinos do XC6SLX16-N3CSG324C 324 balls
Configuração de pinos para XC6SLX16-N3CSG324C (pacote 324 balls). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC6SLX16-N3CSG324C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC6SLX16-N3CSG324C é adequado para 6 aplicaçãos: Industrial Control Logic, Data Acquisition Systems, Communications Interface Consolidation, Programmable Test Equipment, Embedded Instrumentation, Legacy Platform Refresh.
Industrial Control Logic
The XC6SLX16-N3CSG324C fits industrial controllers that combine machine sequencing, interlocks, sensor conditioning logic, and communications in one programmable device. Its 14,579 logic cells provide capacity for control state machines and protocol logic, while 589,824 RAM bits support buffering, counters, and data tables. The 232 available user I/O accommodate digital field-bus, discrete I/O, encoder, and actuator interfaces without requiring several companion logic devices. The -3N speed grade supports predictable timing closure in control paths, but the 324-ball CSBGA requires careful multilayer routing, solid decoupling, and thermal analysis. Engineers should also verify industrial EMC, isolation, environmental, and long-term qualification requirements that are determined by the finished system rather than the FPGA alone.
Recomendado
Data Acquisition Systems
The XC6SLX16-N3CSG324C is appropriate for multichannel data-acquisition front ends requiring parallel capture, buffering, filtering, and data formatting. Its 589,824 RAM bits can serve as acquisition storage or dual-port data buffers, and 232 user I/O support parallel ADC buses, clock distribution, trigger inputs, and status signaling. The programmable logic fabric allows sample-format conversion, digital filtering, and communication packetization to be consolidated into one device. Compared with a fixed-function controller, this FPGA permits field updates and reusable hardware across product variants. Design engineers should partition the clocking, constrain input timing, account for package flight time in high-speed interfaces, and verify that the selected -3N timing profile satisfies acquisition-clock, latency, and throughput requirements.
Recomendado
Communications Interface Consolidation
The XC6SLX16-N3CSG324C can consolidate parallel, serial, and protocol-specific interfaces in communications equipment because 232 user I/O provide substantial board connectivity and the logic fabric can implement multiple protocol endpoints. Engineers can use it for UART, SPI, parallel-to-serial conversion, clock-domain crossing, packet buffering, and test instrumentation around a communications link. Its 589,824 RAM bits allow frame storage and transmit or receive queues, reducing dependence on external memories for moderate data volumes. The -3N speed grade is valuable when interface deadlines are tight, but each clock domain must be constrained independently. Board-level signal integrity, especially for high-speed differential pairs, requires controlled impedance, continuous reference planes, and length matching in accordance with the AMD package and design guidance.
Recomendado
Programmable Test Equipment
The XC6SLX16-N3CSG324C is useful in automated test equipment where stimulus generation, response capture, sequencing, and result reporting must be reprogrammable. The 14,579-cell fabric can implement multiple digital test channels, timing controls, pattern generators, and communication protocols, while 589,824 RAM bits can hold vectors or captured results. Its 232 I/O support instrumentation connections and trigger lines, and the -3N grade provides additional timing margin for synchronous test sequences. A practical implementation places the FPGA near the device-under-test interface to reduce round-trip latency, while configuration and measurement logic run in another clock domain. Engineers should validate signal integrity at the fixture, verify input thresholds for every supported I/O standard, and rerun timing analysis if the speed grade changes.
Recomendado
Embedded Instrumentation
The XC6SLX16-N3CSG324C can serve as the programmable core of embedded instrumentation that combines measurement conditioning, calibration tables, digital filtering, display control, and host communications. Its on-chip RAM supports calibration coefficients, status history, and intermediate filter data, while 232 I/O can connect converters, sensors, local buses, and operator controls. Programmable logic allows measurement algorithms to be revised without changing the PCB, which is valuable for products that span multiple sensor or interface variants. The -3N speed grade helps meet synchronous processing deadlines, although conversion latency and filter clock rate must be checked against the selected architecture. Power, ground, and analog isolation remain board-level responsibilities, and the BGA footprint should be placed to minimize coupling between sensitive analog sections and digital switching return paths.
Recomendado
Legacy Platform Refresh
The XC6SLX16-N3CSG324C supports lifecycle extension of established Spartan-6 LX platforms when maintaining a proven board architecture is more valuable than redesigning around a newer programmable-logic family. Its 14,579 logic cells and 589,824 RAM bits reproduce the resource class of the target platform, while the 232-I/O CSG324 implementation preserves a familiar high-density routing challenge. A drop-in maintenance substitution should stay within the Spartan-6 LX CSG324 family and preserve configuration requirements, I/O standards, clock topology, and timing targets. Engineers must not treat a -2, -3, or industrial-temperature variant as automatically equivalent to -3N. Validate the alternative through static timing analysis, place-and-route results, bitstream generation, hardware diagnostics, and system-level regression testing before releasing it for production.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC6SLX16-N3CSG324C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC6SLX16-2CSG324C | XC6SLX16-2CSG324I | XC6SLX16-3CSG324C | XC6SLX16-3CSG324I |
|---|---|---|---|---|---|
| Package | 324-pin CSBGA | 324-pin CSBGA | 324-pin CSBGA | 324-pin CSBGA | 324-pin CSBGA |
| Brand | AMD | AMD | AMD | AMD | AMD |
| Device Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Cells | 14,579 cells | 14,579 cells | 14,579 cells | 14,579 cells | 14,579 cells |
| Total RAM | 589,824 bits | 589,824 bits | 589,824 bits | 589,824 bits | 589,824 bits |
| User I/O | 232 I/O | 232 I/O | 232 I/O | 232 I/O | 232 I/O |
| Speed Grade | -3N | -2 | -2 industrial | -3 | -3 industrial |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 45 nm | 45 nm | 45 nm | 45 nm | 45 nm |
Principais diferenciais
- Maintains the -3N timing designation within the Spartan-6 LX family (vs XC6SLX16-2CSG324C)
- Provides the same 14,579-cell and 589,824-bit resource configuration in CSG324 (vs XC6SLX16-3CSG324C)
- Offers a standard commercial-temperature ordering path rather than the industrial suffix (vs XC6SLX16-3CSG324I)
Notas de projeto
Use the official AMD CSG324 package drawing and package-device pinout file to establish the PCB land pattern, ball-1 orientation, and board-side pad geometry. A 324-ball CSBGA requires uninterrupted routing across multiple PCB layers, and signal escape density must be checked before placement. Do not infer pin assignments from the 15 mm by 15 mm package size because power, configuration, clock-capable, and user I/O balls have distinct roles.
Route high-speed interfaces as controlled-impedance differential or source-synchronous pairs over a continuous reference plane. Match input and output timing to the selected -3N device constraints in DS162, including board delay and package effects. Avoid routing clocks across split planes or through noisy power regions. The programmable I/O can support several standards, but each voltage, slew rate, drive strength, and termination choice must satisfy the external receiver and timing requirements.
Do not treat the -3N, -3, and -2 speed labels as interchangeable even when all variants use CSG324. AMD states that Spartan-6 LX devices supported in a particular package are pinout compatible, but speed grades retain different timing characteristics. After any substitution, regenerate timing constraints, run static timing analysis, rebuild the bitstream, and verify critical interfaces. LX and LXT devices are not pin compatible.
Separate core and I/O supply routing as directed by the AMD power-supply design guidance, placing local decoupling close to the relevant power balls. Include bulk supply energy near the device and control switching-current loops so the FPGA does not share high-frequency return paths with sensitive external circuitry. Validate power sequencing, inrush, voltage tolerance, and I/O state during configuration against the selected device's electrical limits.
Informações de conformidade
The product listing identifies the CSG324 device as lead-free and RoHS compliant. No explicit REACH, halogen-free, conflict-minerals, or automotive qualification statement was identified for the exact ordering code.