XC6SLX75-N3CSG484C - Spartan-6 LX 74,637 Logic Cell FPGA | Xilinx
N.º da peça: XC6SLX75-N3CSG484C ✗ Fim de vidaXC6SLX75-N3CSG484C Visão geral
A field-programmable gate array is a programmable digital semiconductor whose interconnected logic blocks, memory, and input/output resources are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, which includes complex programmable logic devices, field-programmable gate arrays, and CPLDs. Spartan-6 LX devices target cost-sensitive embedded systems requiring substantial parallel processing, deterministic digital interfaces, and configurable hardware functions without the development cost of a custom ASIC.
The XC6SLX75-N3CSG484C provides 11,662 adaptive logic modules, 74,637 logic cells, and 3.02 Mbit of embedded block RAM. Its 328 I/O positions support board-level interfaces and allow substantial connectivity between programmable logic and external peripherals. The family also includes DSP48A1 slices for filtering, fixed-point arithmetic, and signal-processing pipelines, while SelectIO technology supports high-speed external data transfer.
The architecture combines programmable logic, block RAM, dedicated DSP resources, and clock-management blocks within a single silicon device. Its serial transceivers support high-speed differential communication, and the family documentation describes PCI Express-compatible endpoint blocks and programmable clock generation. This integration reduces external component count in industrial control, communications, instrumentation, and embedded processing systems compared with a design assembled from separate logic and signal-processing devices.
Typical uses include industrial automation, data acquisition, communications infrastructure, embedded video control, test-and-measurement equipment, and network interface designs. The 328 I/O count is useful for parallel sensor aggregation, memory interfaces, status and control buses, and high-speed digital connectivity. A system requiring substantial logic density can also use the 3.02 Mbit embedded memory to buffer data and reduce external memory access.
PCB implementation requires careful power, ground, and signal-integrity planning because a 484-ball CSBGA device has dense escape routing and numerous supply connections. Place decoupling capacitors close to the relevant supply balls, follow the manufacturer package-pinout files when assigning every BGA signal, and preserve the recommended layer stack and via structure. Configuration, clocking, termination, and decoupling requirements must be checked against the applicable Spartan-6 design guidance.
This product page consolidates the key device characteristics, same-package alternatives, package details, and engineering considerations needed for initial Spartan-6 LX design selection. It also highlights distinctions among speed grade, temperature grade, package type, and configuration options so that replacement decisions are based on genuine hardware compatibility rather than device-name similarity.
Alternativas drop-in para XC6SLX75-N3CSG484C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC6SLX75-N3CSG484C (mesmo formato e footprint) — diferindo em Mounting Type, Operating Temperature, Package Type, Speed Grade, Logic Cells.
XC6SLX75-N3CSG484I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX75-3CSG484I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX75-2CSG484I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX75-2CSG484C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX75T-N3CSG484C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC6SLX75-N3CSG484C Classificações máximas e características elétricas
| Device Type | Spartan-6 LX field-programmable gate array |
| Logic Cells | 74,637 logic cells |
| Adaptive Logic Modules | 11,662 ALMs |
| Embedded Memory | 3.02 Mbit |
| Number of I/O | 328 I/O |
| Core Supply Voltage | 1.2 V |
| Encapsulamento | 484-ball CSBGA |
| Tipo de montagem | Surface-mount |
| Temperatura de operação | 0 °C to +85 °C |
| FPGA Architecture | Spartan-6 LX |
| Signal Processing Resource | DSP48A1 slices |
| I/O Technology | SelectIO |
| Memory Controller | SDRAM memory controllers |
| Clock Management | Mixed-mode clock-management blocks |
| High-Speed Serial Interface | Power-optimized high-speed serial transceiver blocks |
| PCI Express Capability | PCI Express-compatible endpoint blocks |
| Configuration Security | AES and Device DNA protection |
Guia de Configuração de Pinos do XC6SLX75-N3CSG484C 484-ball csbga
Configuração de pinos para XC6SLX75-N3CSG484C (pacote 484-ball csbga). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC6SLX75-N3CSG484C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC6SLX75-N3CSG484C é adequado para 6 aplicaçãos: Industrial PLC and Automation Controller, Data Acquisition and Instrumentation, Communications Interface Equipment, Industrial Image Processing, Test and Measurement Systems, Embedded Control and Networking.
Industrial PLC and Automation Controller
The XC6SLX75-N3CSG484C fits industrial programmable-logic controllers because it combines 74,637 logic cells with 328 I/O in a single 484-ball CSBGA device. The 11,662 adaptive logic modules can implement sequencing, motion-control logic, interlocks, and communication protocols without requiring a separate processor for every function. Its DSP48A1 slices can also accelerate filtering or closed-loop control calculations. The 0 °C to +85 °C operating range suits equipment operating in controlled industrial environments, while the large I/O count simplifies connection to sensors, actuators, encoders, and field-bus transceivers.
Recomendado
Data Acquisition and Instrumentation
The XC6SLX75-N3CSG484C is useful in high-channel-count data-acquisition systems because 328 I/O can support parallel digital channels while 3.02 Mbit of embedded memory provides local buffering. DSP48A1 slices can implement digital filtering, correlation, decimation, and real-time signal conditioning, while programmable logic handles triggering and timestamp capture. The 1.2 V core operates from the device's multi-supply architecture, but each rail still requires careful decoupling. For laboratory or industrial instrumentation, designers should also budget enough board area for the 484-ball package and define termination and isolation for external inputs.
Recomendado
Communications Interface Equipment
The XC6SLX75-N3CSG484C can implement high-throughput communications aggregation because its programmable logic, 3.02 Mbit of block RAM, and SelectIO resources work together for parallel-to-serial conversion, packet buffering, and protocol termination. The high-speed serial transceiver blocks add a path for differential links, while the 328 I/O support parallel backplanes and control channels. For network-interface equipment, engineers must select the correct pin-compatible I/O standard, configure the transceiver through the FPGA toolchain, and provide the clocking and termination required by the interface. An active migration plan is advisable for an end-of-life FPGA.
Recomendado
Industrial Image Processing
The XC6SLX75-N3CSG484C supports industrial image-processing pipelines by combining 11,662 adaptive logic modules with dedicated DSP48A1 slices. Parallel logic can perform line buffering, thresholding, pixel-format conversion, and camera-control logic, while the DSP resources accelerate convolution, filtering, and other arithmetic stages. Its 328 I/O provide substantial connectivity for parallel sensors and control signals, and the 3.02 Mbit of embedded memory can reduce external-memory traffic in suitably partitioned designs. System designers should account for the data rate of the image interface, DDR memory routing, FPGA power dissipation, and the thermal capacity of the CSBGA-484 PCB footprint.
Recomendado
Test and Measurement Systems
The XC6SLX75-N3CSG484C is appropriate for test-and-measurement equipment requiring deterministic parallel acquisition, timing control, and configurable analysis logic. Its 74,637 logic cells can host channel sequencing, protocol engines, counters, and control state machines, while DSP48A1 slices support signal analysis close to the data source. The 328 I/O make it possible to combine multiple interface widths on one device, although pin assignment must follow the official BGA package files. For laboratory instruments, the principal engineering tradeoffs are device power, decoupling complexity, configuration security, and the migration work required for a long-life product built around an end-of-life FPGA family.
Recomendado
Embedded Control and Networking
The XC6SLX75-N3CSG484C can consolidate embedded control logic and network-facing functions into one Spartan-6 LX FPGA. Dedicated programmable logic can implement protocol bridges, packet filters, real-time supervisory control, and peripheral arbitration, while embedded RAM supports buffering and the 328 I/O connect the device to sensors, memory, and external transceivers. This integration can reduce component count in compact industrial gateways. The implementation must be reviewed for timing closure on external interfaces, clock-domain crossings, reset behavior, and the configuration mechanism. Because the device is end-of-life, new embedded platforms should include an FPGA migration path and a controlled configuration-management process.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC6SLX75-N3CSG484C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC6SLX75-N3CSG484I | XC6SLX75-3CSG484I | XC6SLX75-2CSG484I | XC6SLX75-2CSG484C | XC6SLX75T-N3CSG484C |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 484-ball CSBGA | 484-ball CSBGA - same | 484-ball CSBGA - same | 484-ball CSBGA - same | 484-ball CSBGA - same | 484-ball CSBGA - same |
| FPGA Series | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX T family |
| Speed Designation | -3 | -3 | -3 | -2 | -2 | -3 |
Principais diferenciais
- Closest same-package ordering alternative (vs XC6SLX75-N3CSG484I)
- Maintains speed grade when selecting the -3 CSBGA variant (vs XC6SLX75-3CSG484I)
- Direct lower-speed alternative within the same package family (vs XC6SLX75-2CSG484C)
Notas de projeto
Treat the 484-ball CSBGA layout as a full package escape-routing problem rather than a conventional perimeter package. Follow the official Spartan-6 package pinout files, preserve the manufacturer-recommended layer stack and via geometry, and place decoupling capacitors close to their associated power balls. Account for solder-mask-defined or nonsolder-mask-defined land patterns according to the fabrication drawing. After schematic symbol completion, compare every ball number mechanically and electrically against the package file to prevent rotated or mismatched assignments.
Plan the complete multi-rail power tree before layout, including the 1.2 V core and every auxiliary supply required by the selected configuration and I/O standards. Use the manufacturer power-decoupling and power-sequencing guidance for each rail, and verify voltage tolerances under both startup and maximum operating activity. FPGA I/O power can change dynamically with standards and bank activity, so a design that works at static conditions may require additional rail filtering or a revised power budget. Validate the assembled board across temperature, load, and power-up permutations before production release.
Assign SelectIO standards only after checking the package's dedicated pins, bank voltage requirements, and permitted I/O combinations. For high-speed differential interfaces, use controlled-impedance routing, continuous reference planes, length matching, and the transceiver's specified termination network. Keep configuration, clock, and reset nets away from noisy switching paths, and observe the manufacturer guidance for bypassing dedicated configuration pins. Signal-integrity simulation should include package and board parasitics when the interface operates near the limits of the selected speed grade.
Do not treat all CSBGA-484 Spartan-6 LX order codes as automatically interchangeable. The device name encodes package, speed, temperature or commercial qualification, and family attributes that can affect timing, qualification, or purchasing. Before replacement, compare the exact ordering table, ball map, temperature range, configuration method, and bitstream support. Also avoid assuming that a larger FPGA in another package is a drop-in substitute; changing from CSBGA-484 to a different package requires PCB changes and a complete pin, power, and timing review.
Estimate power from the actual utilization report rather than relying on logic-cell count alone. Include core, I/O, auxiliary, configuration, and memory power, then apply the highest expected operating condition to the board design. Thermal performance depends strongly on the number of PCB copper layers, via structure, airflow, and adjacent heat sources. Validate the final assembly at the maximum intended clock and I/O activity, preserve the manufacturer's exposed-pad and ground-via requirements, and ensure the selected grade matches the system’s ambient and enclosure temperature range.
Informações de conformidade
The manufacturer and distributor documentation confirms the Spartan-6 LX device family, package, logic resources, operating range, and architectural features. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed for this exact orderable MPN, so those fields remain unknown.