XC6SLX75-N3CSG484C - Spartan-6 LX 74,637 Logic Cell FPGA | Xilinx
料号: XC6SLX75-N3CSG484C ✗ 停产XC6SLX75-N3CSG484C 概述
A field-programmable gate array is a programmable digital semiconductor whose interconnected logic blocks, memory, and input/output resources are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, which includes complex programmable logic devices, field-programmable gate arrays, and CPLDs. Spartan-6 LX devices target cost-sensitive embedded systems requiring substantial parallel processing, deterministic digital interfaces, and configurable hardware functions without the development cost of a custom ASIC.
The XC6SLX75-N3CSG484C provides 11,662 adaptive logic modules, 74,637 logic cells, and 3.02 Mbit of embedded block RAM. Its 328 I/O positions support board-level interfaces and allow substantial connectivity between programmable logic and external peripherals. The family also includes DSP48A1 slices for filtering, fixed-point arithmetic, and signal-processing pipelines, while SelectIO technology supports high-speed external data transfer.
The architecture combines programmable logic, block RAM, dedicated DSP resources, and clock-management blocks within a single silicon device. Its serial transceivers support high-speed differential communication, and the family documentation describes PCI Express-compatible endpoint blocks and programmable clock generation. This integration reduces external component count in industrial control, communications, instrumentation, and embedded processing systems compared with a design assembled from separate logic and signal-processing devices.
Typical uses include industrial automation, data acquisition, communications infrastructure, embedded video control, test-and-measurement equipment, and network interface designs. The 328 I/O count is useful for parallel sensor aggregation, memory interfaces, status and control buses, and high-speed digital connectivity. A system requiring substantial logic density can also use the 3.02 Mbit embedded memory to buffer data and reduce external memory access.
PCB implementation requires careful power, ground, and signal-integrity planning because a 484-ball CSBGA device has dense escape routing and numerous supply connections. Place decoupling capacitors close to the relevant supply balls, follow the manufacturer package-pinout files when assigning every BGA signal, and preserve the recommended layer stack and via structure. Configuration, clocking, termination, and decoupling requirements must be checked against the applicable Spartan-6 design guidance.
This product page consolidates the key device characteristics, same-package alternatives, package details, and engineering considerations needed for initial Spartan-6 LX design selection. It also highlights distinctions among speed grade, temperature grade, package type, and configuration options so that replacement decisions are based on genuine hardware compatibility rather than device-name similarity.
直接替换替代料: XC6SLX75-N3CSG484C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC6SLX75-N3CSG484C (相同外形与封装尺寸) ——差异在于 Mounting Type, Operating Temperature, Package Type, Speed Grade, Logic Cells.
XC6SLX75-N3CSG484I
✅ 直接替换联系询价
查看数据手册 →XC6SLX75-3CSG484I
✅ 直接替换联系询价
查看数据手册 →XC6SLX75-2CSG484I
✅ 直接替换联系询价
查看数据手册 →XC6SLX75-2CSG484C
✅ 直接替换联系询价
查看数据手册 →XC6SLX75T-N3CSG484C
✅ 直接替换📋 参考替代料(不在目录中)
XC6SLX75-N3CSG484C 最大额定值与电气特性
| Device Type | Spartan-6 LX field-programmable gate array |
| Logic Cells | 74,637 logic cells |
| Adaptive Logic Modules | 11,662 ALMs |
| Embedded Memory | 3.02 Mbit |
| Number of I/O | 328 I/O |
| Core Supply Voltage | 1.2 V |
| 封装 | 484-ball CSBGA |
| 安装类型 | Surface-mount |
| 工作温度 | 0 °C to +85 °C |
| FPGA Architecture | Spartan-6 LX |
| Signal Processing Resource | DSP48A1 slices |
| I/O Technology | SelectIO |
| Memory Controller | SDRAM memory controllers |
| Clock Management | Mixed-mode clock-management blocks |
| High-Speed Serial Interface | Power-optimized high-speed serial transceiver blocks |
| PCI Express Capability | PCI Express-compatible endpoint blocks |
| Configuration Security | AES and Device DNA protection |
XC6SLX75-N3CSG484C 484-ball csbga 引脚配置指南
XC6SLX75-N3CSG484C(484-ball csbga 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC6SLX75-N3CSG484C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC6SLX75-N3CSG484C 适用于 6 应用s: Industrial PLC and Automation Controller, Data Acquisition and Instrumentation, Communications Interface Equipment, Industrial Image Processing, Test and Measurement Systems, Embedded Control and Networking.
Industrial PLC and Automation Controller
The XC6SLX75-N3CSG484C fits industrial programmable-logic controllers because it combines 74,637 logic cells with 328 I/O in a single 484-ball CSBGA device. The 11,662 adaptive logic modules can implement sequencing, motion-control logic, interlocks, and communication protocols without requiring a separate processor for every function. Its DSP48A1 slices can also accelerate filtering or closed-loop control calculations. The 0 °C to +85 °C operating range suits equipment operating in controlled industrial environments, while the large I/O count simplifies connection to sensors, actuators, encoders, and field-bus transceivers.
推荐
Data Acquisition and Instrumentation
The XC6SLX75-N3CSG484C is useful in high-channel-count data-acquisition systems because 328 I/O can support parallel digital channels while 3.02 Mbit of embedded memory provides local buffering. DSP48A1 slices can implement digital filtering, correlation, decimation, and real-time signal conditioning, while programmable logic handles triggering and timestamp capture. The 1.2 V core operates from the device's multi-supply architecture, but each rail still requires careful decoupling. For laboratory or industrial instrumentation, designers should also budget enough board area for the 484-ball package and define termination and isolation for external inputs.
推荐
Communications Interface Equipment
The XC6SLX75-N3CSG484C can implement high-throughput communications aggregation because its programmable logic, 3.02 Mbit of block RAM, and SelectIO resources work together for parallel-to-serial conversion, packet buffering, and protocol termination. The high-speed serial transceiver blocks add a path for differential links, while the 328 I/O support parallel backplanes and control channels. For network-interface equipment, engineers must select the correct pin-compatible I/O standard, configure the transceiver through the FPGA toolchain, and provide the clocking and termination required by the interface. An active migration plan is advisable for an end-of-life FPGA.
推荐
Industrial Image Processing
The XC6SLX75-N3CSG484C supports industrial image-processing pipelines by combining 11,662 adaptive logic modules with dedicated DSP48A1 slices. Parallel logic can perform line buffering, thresholding, pixel-format conversion, and camera-control logic, while the DSP resources accelerate convolution, filtering, and other arithmetic stages. Its 328 I/O provide substantial connectivity for parallel sensors and control signals, and the 3.02 Mbit of embedded memory can reduce external-memory traffic in suitably partitioned designs. System designers should account for the data rate of the image interface, DDR memory routing, FPGA power dissipation, and the thermal capacity of the CSBGA-484 PCB footprint.
推荐
Test and Measurement Systems
The XC6SLX75-N3CSG484C is appropriate for test-and-measurement equipment requiring deterministic parallel acquisition, timing control, and configurable analysis logic. Its 74,637 logic cells can host channel sequencing, protocol engines, counters, and control state machines, while DSP48A1 slices support signal analysis close to the data source. The 328 I/O make it possible to combine multiple interface widths on one device, although pin assignment must follow the official BGA package files. For laboratory instruments, the principal engineering tradeoffs are device power, decoupling complexity, configuration security, and the migration work required for a long-life product built around an end-of-life FPGA family.
推荐
Embedded Control and Networking
The XC6SLX75-N3CSG484C can consolidate embedded control logic and network-facing functions into one Spartan-6 LX FPGA. Dedicated programmable logic can implement protocol bridges, packet filters, real-time supervisory control, and peripheral arbitration, while embedded RAM supports buffering and the 328 I/O connect the device to sensors, memory, and external transceivers. This integration can reduce component count in compact industrial gateways. The implementation must be reviewed for timing closure on external interfaces, clock-domain crossings, reset behavior, and the configuration mechanism. Because the device is end-of-life, new embedded platforms should include an FPGA migration path and a controlled configuration-management process.
推荐
推荐产品汇总
工程参考数据: XC6SLX75-N3CSG484C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC6SLX75-N3CSG484I | XC6SLX75-3CSG484I | XC6SLX75-2CSG484I | XC6SLX75-2CSG484C | XC6SLX75T-N3CSG484C |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 484-ball CSBGA | 484-ball CSBGA - same | 484-ball CSBGA - same | 484-ball CSBGA - same | 484-ball CSBGA - same | 484-ball CSBGA - same |
| FPGA Series | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX T family |
| Speed Designation | -3 | -3 | -3 | -2 | -2 | -3 |
关键差异点
- Closest same-package ordering alternative (对比 XC6SLX75-N3CSG484I)
- Maintains speed grade when selecting the -3 CSBGA variant (对比 XC6SLX75-3CSG484I)
- Direct lower-speed alternative within the same package family (对比 XC6SLX75-2CSG484C)
设计说明
Treat the 484-ball CSBGA layout as a full package escape-routing problem rather than a conventional perimeter package. Follow the official Spartan-6 package pinout files, preserve the manufacturer-recommended layer stack and via geometry, and place decoupling capacitors close to their associated power balls. Account for solder-mask-defined or nonsolder-mask-defined land patterns according to the fabrication drawing. After schematic symbol completion, compare every ball number mechanically and electrically against the package file to prevent rotated or mismatched assignments.
Plan the complete multi-rail power tree before layout, including the 1.2 V core and every auxiliary supply required by the selected configuration and I/O standards. Use the manufacturer power-decoupling and power-sequencing guidance for each rail, and verify voltage tolerances under both startup and maximum operating activity. FPGA I/O power can change dynamically with standards and bank activity, so a design that works at static conditions may require additional rail filtering or a revised power budget. Validate the assembled board across temperature, load, and power-up permutations before production release.
Assign SelectIO standards only after checking the package's dedicated pins, bank voltage requirements, and permitted I/O combinations. For high-speed differential interfaces, use controlled-impedance routing, continuous reference planes, length matching, and the transceiver's specified termination network. Keep configuration, clock, and reset nets away from noisy switching paths, and observe the manufacturer guidance for bypassing dedicated configuration pins. Signal-integrity simulation should include package and board parasitics when the interface operates near the limits of the selected speed grade.
Do not treat all CSBGA-484 Spartan-6 LX order codes as automatically interchangeable. The device name encodes package, speed, temperature or commercial qualification, and family attributes that can affect timing, qualification, or purchasing. Before replacement, compare the exact ordering table, ball map, temperature range, configuration method, and bitstream support. Also avoid assuming that a larger FPGA in another package is a drop-in substitute; changing from CSBGA-484 to a different package requires PCB changes and a complete pin, power, and timing review.
Estimate power from the actual utilization report rather than relying on logic-cell count alone. Include core, I/O, auxiliary, configuration, and memory power, then apply the highest expected operating condition to the board design. Thermal performance depends strongly on the number of PCB copper layers, via structure, airflow, and adjacent heat sources. Validate the final assembly at the maximum intended clock and I/O activity, preserve the manufacturer's exposed-pad and ground-via requirements, and ensure the selected grade matches the system’s ambient and enclosure temperature range.
合规信息
The manufacturer and distributor documentation confirms the Spartan-6 LX device family, package, logic resources, operating range, and architectural features. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed for this exact orderable MPN, so those fields remain unknown.