XC7A12T-L2CPG238E Artix-7 FPGA 12,800 Logic Cells | AMD
N.º da peça: XC7A12T-L2CPG238E ✓ AtivoXC7A12T-L2CPG238E Visão geral
An FPGA is a programmable semiconductor whose logic, memory, and I/O resources can be configured after manufacture. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and below application-specific programmable devices. Artix-7 devices combine configurable logic blocks, dedicated DSP slices, block RAM, programmable input/output, and high-speed serial transceivers, allowing one device to implement control logic, signal processing, and external interfaces without relying on a separate processor for peripheral management.
The XC7A12T provides 1,000 configurable logic blocks organized into 12,800 logic cells. Its 737,280 bits of block RAM support buffering, packet storage, data acquisition, and general-purpose embedded memory. The device also exposes 106 programmable I/O, which supports parallel buses, control signals, status outputs, and external memory interfaces. The package and pin arrangement support high-density board layouts, while the low-power -L family designation targets cost-sensitive embedded systems where performance and energy efficiency must coexist.
The XC7A12T family is supported by AMD Xilinx FPGA development tools, Vivado Design Suite, and programming configurations for parallel processing, interface bridging, and embedded control. A maximum family clock figure of 1,286 MHz is associated with the XC7A12T performance class, but realized system timing depends on the selected speed grade, clocking resources, logic utilization, I/O standards, and board-level implementation.
Typical uses include industrial automation and factory control, compact data-acquisition systems, network interface conversion, embedded video and image-processing pipelines, and instrumentation requiring parallel logic with on-chip memory. The device is also appropriate for education, prototyping, and general-purpose digital design where programmable logic replaces combinations of discrete fixed-function ICs.
Board planning should begin with the 238-ball package pinout and the power, configuration, clocking, and differential-pair requirements in the Artix-7 7 Series FPGAs Data Sheet: Overview, DS180. Validate the selected I/O standard against the voltage supplied to the relevant bank, and confirm the pinout files for the exact 238-ball package before assigning PCB tracks.
This page consolidates device specifications, package information, practical design guidance, and technically relevant alternatives. It is intended to help engineers qualify the Artix-7 device against logic, memory, I/O, thermal, and board-layout requirements before committing the FPGA to a design.
Alternativas drop-in para XC7A12T-L2CPG238E — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC7A12T-L2CPG238E (mesmo formato e footprint) — diferindo em Package, Device Type, Logic Cells, Core Supply Voltage, Package Type.
XC7A12T-2CPG238C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7A12T-1CPG238C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7A12T-2CPG238I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7A12T-3CPG238E
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7A12T-1CPG238I
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC7A12T-L2CPG238E Classificações máximas e características elétricas
| Device Type | Artix-7 FPGA |
| Logic Cells | 12,800 |
| Configurable Logic Blocks | 1,000 CLBs |
| Block RAM | 737,280 bits |
| Programmable I/O | 106 I/O |
| Maximum Family Clock Frequency | 1,286 MHz |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Junction Temperature Range | 0 °C to 100 °C (TJ) |
| Encapsulamento | 238-LFBGA, CSPBGA |
| Package Type | Chip-scale BGA |
| Ball Count | 238 balls |
| Series | 7 Series |
| Family | Artix-7 |
| Product Class | Low-power Artix-7 |
| Performance Grade | -2 |
| Temperature Designator | E - extended commercial temperature |
| Design Tool Support | AMD Xilinx FPGA development tools |
Guia de Configuração de Pinos do XC7A12T-L2CPG238E chip-scale bga
Configuração de pinos para XC7A12T-L2CPG238E (pacote chip-scale bga). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC7A12T-L2CPG238E.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC7A12T-L2CPG238E é adequado para 6 aplicaçãos: Industrial Automation and Factory Control, Compact Data-Acquisition Systems, Network Interface Conversion and Protocol Bridging, Instrumentation and Test Systems, Embedded Video and Image Processing Pipelines, Education and Digital Design Prototyping.
Industrial Automation and Factory Control
The XC7A12T-L2CPG238E fits compact factory-control modules that combine sequencing, interlocks, counters, and communication-interface logic. Its 12,800 logic cells provide substantial parallelism, while 737,280 bits of block RAM can support state histories, diagnostic buffers, and sampled process data. The 106 programmable I/O allow the controller to connect discrete sensors, actuator drivers, and parallel industrial buses. The 0 °C to 100 °C junction-temperature specification must be checked against the enclosure temperature and FPGA self-heating. Because the -L part emphasizes low power, it is especially useful in continuously powered equipment where fanless operation limits the available thermal margin.
Recomendado
Compact Data-Acquisition Systems
The Artix-7 XC7A12T-L2CPG238E is suitable for multichannel acquisition when the design must perform buffering, channel interleaving, filtering, and packet preparation in programmable logic. The 737,280 bits of block RAM provide local storage for time-aligned samples and trigger windows, reducing pressure on an external processor. With 106 programmable I/O, parallel ADC interfaces and control signals can be assigned without relying on a large programmable-logic footprint. The 1,286 MHz family clock figure establishes a device-class ceiling, while actual throughput depends on the implemented datapath and timing closure. Designers should pipeline ADC transfers, constrain interface timing, and keep high-speed clocks away from sensitive analog input regions.
Recomendado
Network Interface Conversion and Protocol Bridging
The XC7A12T-L2CPG238E can implement protocol converters, packet classifiers, and legacy-to-modern interface bridges when deterministic parallel logic is preferred. Its configurable I/O and 12,800 logic cells can handle framing, checksums, queues, and stream-state machines, while the on-chip block RAM supports FIFOs and packet buffering. Using programmable logic for these functions reduces the dependence on a separate processor and allows latency to be fixed in hardware. The 238-ball CSPBGA package supports dense routing, but board design must preserve the Artix-7 package pinout and provide clean clocking for high-speed serial interfaces. Validate protocol timing and physical-layer compliance with the device-specific implementation constraints.
Recomendado
Instrumentation and Test Systems
The XC7A12T-L2CPG238E suits instrumentation front ends that need parallel measurement control, calibration tables, waveform generation, and data formatting in one device. Its 737,280 bits of block RAM can hold calibration coefficients, captured vectors, or display buffers, while the 12,800 logic cells support parallel measurement channels and time-base logic. The 106 programmable I/O provide flexible connections to converters, display controllers, and trigger sources. The low-power -L family designation is valuable in bench instruments where fanless enclosures limit heat dissipation. Engineers should still budget junction-temperature rise and separate sensitive analog routing from the digital switching region to avoid measurement degradation.
Recomendado
Embedded Video and Image Processing Pipelines
The XC7A12T-L2CPG238E can implement pixel pipelines, lookup tables, frame-buffer management, and sensor-interface timing for compact imaging modules. Its configurable logic blocks support parallel pixel operations, and 737,280 bits of block RAM can hold line buffers or compact frame regions. The 106 user I/O give designers access to parallel sensors, synchronizers, and display interfaces while programmable logic handles deterministic timing. Real-time performance depends on correct clock-domain crossings, efficient memory inference, and a layout that does not degrade the available routing resource. Because the device is relatively compact, high utilization of RAM, DSP, and I/O can shift the bottleneck to routing even when raw logic-cell usage appears moderate.
Recomendado
Education and Digital Design Prototyping
The XC7A12T-L2CPG238E is well suited to FPGA teaching, logic-analyzer prototypes, CPU demonstrations, and coursework in digital design. Students can use 12,800 logic cells and 737,280 RAM bits to implement counters, finite-state machines, processors, and signal-processing examples without building a board around many discrete devices. The 106 programmable I/O simplify connection to switches, displays, converters, and memory. The 238-ball CSPBGA package is compact but requires careful fanout and layer-transition planning, so a prototype should follow the official package pinout file rather than inferring connections from a generic diagram. Vivado timing reports then provide a practical basis for comparing the -2 part with other speed grades.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC7A12T-L2CPG238E — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC7A12T-2CPG238C | XC7A12T-1CPG238C | XC7A12T-2CPG238I | XC7A12T-3CPG238E | XC7A12T-1CPG238I |
|---|---|---|---|---|---|---|
| Package | 238-LFBGA, CSPBGA | 238-LFBGA, CSPBGA - same | 238-LFBGA, CSPBGA - same | 238-LFBGA, CSPBGA - same | 238-LFBGA, CSPBGA - same | 238-LFBGA, CSPBGA - same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Logic Cells | 12,800 | 12,800 | 12,800 | 12,800 | 12,800 | 12,800 |
| Configurable Logic Blocks | 1,000 CLBs | 1,000 CLBs | 1,000 CLBs | 1,000 CLBs | 1,000 CLBs | 1,000 CLBs |
| Block RAM | 737,280 bits | 737,280 bits | 737,280 bits | 737,280 bits | 737,280 bits | 737,280 bits |
| Programmable I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O |
| Core Supply Voltage | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V |
| Performance Class | -2 speed class | -2 speed class | -1 speed class, one class below -2 | -2 speed class | -3 speed class, one class above -2 | -1 speed class, one class below -2 |
| Temperature Designator | E | C | C | I | E | I |
Principais diferenciais
- Low-power Artix-7 implementation retains the complete XC7A12T resource configuration (vs XC7A12T-2CPG238C)
- Direct -2 performance-class option on the identical 238-ball package (vs XC7A12T-1CPG238C)
- Commercial-temperature designation supports room-temperature industrial and commercial equipment (vs XC7A12T-2CPG238I)
- Same resource profile and footprint allow timing-grade evaluation without changing the board (vs XC7A12T-3CPG238E)
Notas de projeto
Assign the PCB exclusively from the 238-ball Artix-7 package pinout file. BGA escape routing must preserve the published ball locations for power, configuration, clock, and user I/O; changing the escape sequence can create length mismatches on constrained interfaces. Treat clock-capable pins as a placement group and route clock networks on low-noise layers away from switching I/O. Complete layer transitions with a defined reference-plane strategy and verify the escape pattern against the mechanical drawing rather than relying on a visual approximation of the package diagram.
Plan the power tree from the 0.95 V to 1.05 V core requirement and the bank-specific I/O supplies required by the selected standards. Separate the quiet core path from high-current I/O and configuration switching, and place bulk and local decoupling directly at the associated package balls. Validate the power-source impedance, droop, startup sequence, and auxiliary rails against DS180 before layout signoff. Estimated power consumption should be calculated from the actual design utilization because logic-cell count alone does not determine dynamic current.
Use the 0 °C to 100 °C junction-temperature limit as a device constraint, not as an enclosure requirement. Calculate worst-case junction temperature from ambient temperature, FPGA self-heating, board thermal resistance, and the thermal path into the PCB. The compact CSPBGA package can be thermally limited in fanless equipment, so provide copper spreading around the device without obstructing other routing. Any heat-sink or enclosure strategy must be validated with the assembled design rather than relying on package mass alone.
Constrain every external interface in the FPGA design, especially clocks, chip selects, and source-synchronous buses. Use the device pinout and DS180 switching specifications to determine which pins support the intended I/O standard and timing. Keep configuration-mode pins and shared configuration pins at their required states during normal operation, and avoid unintended transitions when programming or resetting the device. Post-layout timing and signal-integrity analysis should confirm both timing margins and overshoot or undershoot on external nets.
Informações de conformidade
Compliance attributes require confirmation from the current AMD product documentation or the supplier's declaration for the exact ordering code.