XC9536XL-10VQ44C 36-Macrocell CPLD | AMD/Xilinx
N.º da peça: XC9536XL-10VQ44C ✓ AtivoXC9536XL-10VQ44C Visão geral
A CPLD, or complex programmable logic device, is a programmable semiconductor that sits between fixed-function logic and a field-programmable gate array. Its simplified architecture and nonvolatile configuration memory make it useful for glue logic, bus decoding, state machines, control logic, and legacy interface adaptation. Within the product hierarchy, the XC9536XL is a CPLD, a programmable-logic device, and ultimately a semiconductor intended to replace multiple discrete logic ICs.
Key characteristics include 36 macrocells, 800 usable gates, 34 I/O positions with 32 user I/O pins, and in-system programmability. The manufacturer datasheet specifies a minimum of 10,000 in-system program and erase cycles and a minimum data-retention period of 20 years. The XC9500XL family also supports bus-hold behavior that defaults to an equivalent 50 kΩ pull-up resistor when the device is not in valid user operation.
The “XL” designation identifies the high-performance XC9500XL architecture, while “-10” identifies the 10 ns propagation-delay grade. The VQ44 suffix denotes the 44-pin plastic VQFP package, and the terminal “C” identifies the associated commercial temperature option. This device is nonvolatile, so its configuration is retained without continuous SRAM refresh and is restored after power is reapplied.
Typical applications include industrial control-panel logic, legacy peripheral-interface bridging, encoder and counter decoding, memory-interface control, communication-interface glue logic, and compact board-level state machines. Its 32 user I/O pins make it especially useful when a design needs moderate parallel connectivity without the resource cost or complexity of a larger FPGA.
PCB implementation should preserve the manufacturer’s pinout, power, and programming recommendations, particularly around JTAG configuration access and supply decoupling. Confirm signal levels, temperature grade, and pin assignments against the DS058 datasheet before substitution or reuse. In-system programming allows board-level configuration, but the JTAG chain, pull devices, cable voltage, and programming sequence must still be validated on the assembled design.
This product page combines the exact XC9536XL-10VQ44C ordering information, package and logic characteristics, lifecycle-relevant sourcing details, pin-compatible comparison options, and practical replacement guidance. It also distinguishes speed, temperature, and package-code variations that can look interchangeable in search results but still require careful engineering review.
Alternativas drop-in para XC9536XL-10VQ44C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC9536XL-10VQ44C (mesmo formato e footprint) — diferindo em Device Type, Package, Usable Gates, Lead-Free Status, Propagation Delay Grade.
XC9536XL-10VQ44I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC9536XL-10VQG44I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC9536XL-10VQG44C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC9536XL-7VQG44C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC9536XL-15VQG44C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC9536XL-10VQ44C Classificações máximas e características elétricas
| Device Type | In-System Programmable CPLD |
| Series | XC9500XL |
| Macrocell Count | 36 macrocells |
| Usable Gate Count | 800 gates |
| Propagation Delay Grade | 10 ns |
| Total I/O Positions | 34 I/O |
| User I/O Pin Count | 32 user I/O pins |
| I/O Tolerance | 5 V tolerant |
| Programmability | In-system programmable |
| Programming Interface | JTAG |
| Minimum Program/Erase Endurance | 10,000 cycles |
| Minimum Data Retention | 20 years |
| Bus-Hold Default State | Equivalent to 50 kΩ pull-up resistor |
| Encapsulamento | 44-pin VQFP |
| Tipo de montagem | Surface mount |
| Temperature Grade | Commercial |
Guia de Configuração de Pinos do XC9536XL-10VQ44C 44-pin vqfp
Configuração de pinos para XC9536XL-10VQ44C (pacote 44-pin vqfp). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC9536XL-10VQ44C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC9536XL-10VQ44C é adequado para 6 aplicaçãos: Industrial Control Glue Logic, Legacy Peripheral Interface Bridging, Encoder Counter and Pulse Processing, Communication Interface Control, Memory and Address Decoding, Data Acquisition and Signal Conditioning.
Industrial Control Glue Logic
The XC9536XL-10VQ44C fits compact industrial control boards that need deterministic logic consolidation without allocating a full FPGA. Its 36 macrocells and 800 usable gates can implement state machines, command decoding, interlocks, and discrete interface logic, while 32 user I/O pins provide practical parallel connectivity. The 10 ns propagation-delay grade is appropriate for many control and supervisory paths, and nonvolatile configuration permits immediate operation after power restoration. For systems with extended ambient-temperature requirements, specify the industrial XC9536XL-10VQ44I; the commercial C-grade target is best used where the enclosure and specified operating range remain within commercial limits.
Recomendado
Legacy Peripheral Interface Bridging
The XC9536XL-10VQ44C is useful for adapting legacy parallel peripherals to a modern control system. Its 32 user I/O pins can support data buffering, command translation, interrupt coordination, and bus arbitration while the nonvolatile macrocell configuration preserves the bridge logic across power cycles. The 10 ns grade gives sufficient timing margin for many register-level and latch-based interface paths, although external peripheral timing must be included in the system budget. JTAG in-system programming also allows board-level configuration and diagnostics. Validate signal direction, voltage compatibility, and setup-and-hold timing against both the DS058 datasheet and the connected peripheral specifications.
Recomendado
Encoder Counter and Pulse Processing
The XC9536XL-10VQ44C can implement programmable counter, encoder-decoder, and pulse-qualification functions when modest logic density and several parallel I/O channels are required. Thirty-two user I/O pins allow quadrature inputs, capture registers, reset handling, and status outputs to be consolidated in one device. The 10 ns propagation-delay class supports many asynchronous control paths, but the maximum input frequency also depends on the implemented architecture, I/O timing, and external filtering. Add appropriate input conditioning, synchronize asynchronous signals where required, and validate the final design with the intended encoder frequency and cable environment.
Recomendado
Communication Interface Control
The XC9536XL-10VQ44C can handle protocol framing, command filtering, status-register logic, and interface handshaking in communication-adapter hardware. Its 36 macrocells are sufficient for multiple finite state machines and bit-level control functions, while the 32 user I/O pins support parallel data, control, and interrupt paths. The device's JTAG programming supports production programming and board debug, and its nonvolatile configuration ensures consistent behavior after power cycles. Designers should define clock domains carefully, add reset synchronization, and use the 10 ns timing grade only where all external transceiver and connector delays have been included.
Recomendado
Memory and Address Decoding
The XC9536XL-10VQ44C is suited to address decoding, chip-select generation, register overlays, and simple memory-interface sequencing in legacy embedded systems. Thirty-two user I/O pins permit the device to manage multiple address, select, acknowledge, and interrupt signals while keeping the implementation compact. The 10 ns grade and 800 usable gates provide ample room for decoder logic and supervisory state machines in many control applications. Confirm memory access times, bus turnaround requirements, and contention behavior in system-level timing analysis. For reduced timing margin or more critical decode paths, the 7 ns XC9536XL option may offer additional margin.
Recomendado
Data Acquisition and Signal Conditioning
The XC9536XL-10VQ44C can implement digital conditioning around sensors, converters, and data-acquisition front ends. Suitable functions include sample sequencing, channel selection, threshold logic, latch coordination, and host-interface control. The 32 user I/O pins and 36 macrocells allow a compact acquisition controller to be implemented without a larger programmable-logic device, while the nonvolatile configuration supports repeatable startup behavior. Input thresholds, signal polarity, isolation boundaries, and sampling timing must be reviewed independently of the CPLD logic. The commercial C-grade target is suitable where operating temperature remains within its specified limits; industrial equipment may require the I-grade option.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC9536XL-10VQ44C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC9536XL-10VQ44I | XC9536XL-10VQG44I | XC9536XL-10VQG44C | XC9536XL-7VQG44C | XC9536XL-15VQG44C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 44-pin VQFP | 44-pin VQFP | 44-pin VQFP | 44-pin VQFP | 44-pin VQFP | 44-pin VQFP |
| Macrocell Count | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells |
| Usable Gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates |
| User I/O Pins | 32 user I/O pins | 32 user I/O pins | 32 user I/O pins | 32 user I/O pins | 32 user I/O pins | 32 user I/O pins |
| Propagation Delay | 10 ns | 10 ns | 10 ns | 10 ns | 7 ns | 15 ns |
| Programmability | In-system programmable via JTAG | In-system programmable via JTAG | In-system programmable via JTAG | In-system programmable via JTAG | In-system programmable via JTAG | In-system programmable via JTAG |
| Temperature Option | Commercial | Industrial | Industrial | Commercial | Commercial | Commercial |
Principais diferenciais
- Exact 10 ns timing grade with 32 user I/O pins (vs XC9536XL-15VQG44C)
- Faster performance margin than the 15 ns family option (vs XC9536XL-15VQG44C)
- Commercial-grade exact ordering code (vs XC9536XL-10VQ44I)
- Balanced timing performance without faster-grade power or sourcing trade-offs (vs XC9536XL-7VQG44C)
Notas de projeto
Use the DS058 VQ44 footprint and pin table as the controlling mechanical references for PCB layout. Confirm pad dimensions, solder-mask definition, paste geometry, and exposed or removed-pin status against the package drawing rather than scaling a generic 44-pin footprint. Preserve adequate clearance around power and ground pins and route sensitive programming or clock signals away from high-current switching traces. A footprint that matches visually can still differ in pad numbering or thermal-pad treatment.
Follow the manufacturer’s recommended supply decoupling and power-pin connection sequence, placing the closest decoupling capacitor directly beside the applicable supply and ground pins. Keep return-current paths short and use a continuous ground plane where the board stack-up permits. Review the DS058 electrical tables for the exact core and I/O supply values, their sequencing requirements, and the permissible input levels. The advertised 5 V-tolerant I/O capability does not remove the need to verify each signal’s voltage domain.
Do not assume that every XC9536XL ordering suffix is interchangeable merely because the macrocell count and nominal VQFP pin count match. The speed grade changes timing margin, the C or I suffix changes temperature qualification, and package codes can reflect different ordering conventions. Before substitution, compare the full ordering table, pin configuration, electrical tables, and PCB footprint. For the target’s 10 ns commercial-grade requirements, the 10 ns I-grade part is preferable to a 7 ns or 15 ns grade when those differences do not improve the design.
Design JTAG programming access as a deliberate board feature: keep the chain accessible, define connector voltage levels, account for signal direction at the device, and provide the pull devices required by the configuration circuit. If the JTAG path also crosses noisy power or motor-control areas, use controlled routing and appropriate return paths. Validate the chain with an ISE-compatible cable and programming setup before relying on field programming, especially where a failed configuration could disable critical board functions.
Informações de conformidade
The exact XC9536XL-10VQ44C listing does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. A related XC9536XL-10VQG44C listing is identified as RoHS compliant and lead-free, but that statement is not transferred to the target ordering code. The device is an industrial/commercial programmable-logic IC rather than an AEC-Q100 automotive-qualified device.