AMD

XC9536XL-10VQ44C 36-Macrocell CPLD | AMD/Xilinx

MPN: XC9536XL-10VQ44C ✓ פעיל
44-pin VQFP Package
כמות הזמנה מינימלית: 1 |

XC9536XL-10VQ44C סקירה

AMD XC9536XL-10VQ44C is a 36-macrocell in-system-programmable complex programmable logic device with 32 user I/O pins, a 10 ns propagation-delay grade, and a 44-pin VQFP surface-mount package. It provides approximately 800 usable gates and belongs to the XC9500XL high-performance CPLD family, combining deterministic nonvolatile configuration storage with flexible I/O for logic consolidation and interface control.

A CPLD, or complex programmable logic device, is a programmable semiconductor that sits between fixed-function logic and a field-programmable gate array. Its simplified architecture and nonvolatile configuration memory make it useful for glue logic, bus decoding, state machines, control logic, and legacy interface adaptation. Within the product hierarchy, the XC9536XL is a CPLD, a programmable-logic device, and ultimately a semiconductor intended to replace multiple discrete logic ICs.

Key characteristics include 36 macrocells, 800 usable gates, 34 I/O positions with 32 user I/O pins, and in-system programmability. The manufacturer datasheet specifies a minimum of 10,000 in-system program and erase cycles and a minimum data-retention period of 20 years. The XC9500XL family also supports bus-hold behavior that defaults to an equivalent 50 kΩ pull-up resistor when the device is not in valid user operation.

The “XL” designation identifies the high-performance XC9500XL architecture, while “-10” identifies the 10 ns propagation-delay grade. The VQ44 suffix denotes the 44-pin plastic VQFP package, and the terminal “C” identifies the associated commercial temperature option. This device is nonvolatile, so its configuration is retained without continuous SRAM refresh and is restored after power is reapplied.

Typical applications include industrial control-panel logic, legacy peripheral-interface bridging, encoder and counter decoding, memory-interface control, communication-interface glue logic, and compact board-level state machines. Its 32 user I/O pins make it especially useful when a design needs moderate parallel connectivity without the resource cost or complexity of a larger FPGA.

PCB implementation should preserve the manufacturer’s pinout, power, and programming recommendations, particularly around JTAG configuration access and supply decoupling. Confirm signal levels, temperature grade, and pin assignments against the DS058 datasheet before substitution or reuse. In-system programming allows board-level configuration, but the JTAG chain, pull devices, cable voltage, and programming sequence must still be validated on the assembled design.

This product page combines the exact XC9536XL-10VQ44C ordering information, package and logic characteristics, lifecycle-relevant sourcing details, pin-compatible comparison options, and practical replacement guidance. It also distinguishes speed, temperature, and package-code variations that can look interchangeable in search results but still require careful engineering review.

חלופות תחליף ישיר עבור XC9536XL-10VQ44C — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם XC9536XL-10VQ44C (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Package, Usable Gates, Lead-Free Status, Propagation Delay Grade.

Xilinx
Package: 44-VQFP (10 mm x 10 mm)
Usable Gates: 800
Lead-Free Status: Contains Lead
השווה עם XC9536XL-10VQ44C →
AMD
Device Type: Complex programmable logic device (CPLD)
Usable Gates: 800 gates
Lead-Free Status: unknown
השווה עם XC9536XL-10VQ44C →
AMD
Device Type: Complex Programmable Logic Device (CPLD)
Usable Gates: 800 gates
Propagation Delay Grade: 5 ns
השווה עם XC9536XL-10VQ44C →

XC9536XL-10VQ44I

✅ Drop-In
AMD
📦 44-pin VQFP
Complex programmable logic device (CPLD) · XC9500XL · 36 macrocells · 800 gates · 34 I/O pins · 2 function blocks · 10 ns · 3 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

XC9536XL-10VQG44I

✅ Drop-In
📦 44-pin VQFP
Same 36 macrocells, 32 user I/O pins, and 10 ns grade; VQG package coding and industrial temperature grade differ from the C option.

📋 חלופה להתייחסות (לא בקטלוג)

XC9536XL-10VQG44C

✅ Drop-In
📦 44-pin VQFP
Same 36 macrocells, 32 user I/O pins, and 10 ns grade; only the VQG package-ordering code differs from the VQ44 code.

📋 חלופה להתייחסות (לא בקטלוג)

XC9536XL-7VQG44C

✅ Drop-In
📦 44-pin VQFP
Same 36 macrocells and 32 user I/O pins; 7 ns propagation delay is 3 ns faster than the 10 ns target grade.

📋 חלופה להתייחסות (לא בקטלוג)

XC9536XL-15VQG44C

✅ Drop-In
📦 44-pin VQFP
Same 36 macrocells and 32 user I/O pins; 15 ns propagation delay is 5 ns slower than the 10 ns target grade.

📋 חלופה להתייחסות (לא בקטלוג)

XC9536XL-10VQ44C דירוגים מרביים ומאפיינים חשמליים

Device Type In-System Programmable CPLD
Series XC9500XL
Macrocell Count 36 macrocells
Usable Gate Count 800 gates
Propagation Delay Grade 10 ns
Total I/O Positions 34 I/O
User I/O Pin Count 32 user I/O pins
I/O Tolerance 5 V tolerant
Programmability In-system programmable
Programming Interface JTAG
Minimum Program/Erase Endurance 10,000 cycles
Minimum Data Retention 20 years
Bus-Hold Default State Equivalent to 50 kΩ pull-up resistor
מארז 44-pin VQFP
סוג הרכבה Surface mount
Temperature Grade Commercial

מדריך תצורת פינים של XC9536XL-10VQ44C 44-pin vqfp

תצורת פינים עבור XC9536XL-10VQ44C (מארזת 44-pin vqfp). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 44-pin vqfp עבור XC9536XL-10VQ44C

אין נתוני פריסת פינים מפורטים עבור XC9536XL-10VQ44C.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

XC9536XL-10VQ44C מתאים עבור 6 יישוםs: Industrial Control Glue Logic, Legacy Peripheral Interface Bridging, Encoder Counter and Pulse Processing, Communication Interface Control, Memory and Address Decoding, Data Acquisition and Signal Conditioning.

🏭

Industrial Control Glue Logic

The XC9536XL-10VQ44C fits compact industrial control boards that need deterministic logic consolidation without allocating a full FPGA. Its 36 macrocells and 800 usable gates can implement state machines, command decoding, interlocks, and discrete interface logic, while 32 user I/O pins provide practical parallel connectivity. The 10 ns propagation-delay grade is appropriate for many control and supervisory paths, and nonvolatile configuration permits immediate operation after power restoration. For systems with extended ambient-temperature requirements, specify the industrial XC9536XL-10VQ44I; the commercial C-grade target is best used where the enclosure and specified operating range remain within commercial limits.

🔧

Legacy Peripheral Interface Bridging

The XC9536XL-10VQ44C is useful for adapting legacy parallel peripherals to a modern control system. Its 32 user I/O pins can support data buffering, command translation, interrupt coordination, and bus arbitration while the nonvolatile macrocell configuration preserves the bridge logic across power cycles. The 10 ns grade gives sufficient timing margin for many register-level and latch-based interface paths, although external peripheral timing must be included in the system budget. JTAG in-system programming also allows board-level configuration and diagnostics. Validate signal direction, voltage compatibility, and setup-and-hold timing against both the DS058 datasheet and the connected peripheral specifications.

⚙️

Encoder Counter and Pulse Processing

The XC9536XL-10VQ44C can implement programmable counter, encoder-decoder, and pulse-qualification functions when modest logic density and several parallel I/O channels are required. Thirty-two user I/O pins allow quadrature inputs, capture registers, reset handling, and status outputs to be consolidated in one device. The 10 ns propagation-delay class supports many asynchronous control paths, but the maximum input frequency also depends on the implemented architecture, I/O timing, and external filtering. Add appropriate input conditioning, synchronize asynchronous signals where required, and validate the final design with the intended encoder frequency and cable environment.

🌐

Communication Interface Control

The XC9536XL-10VQ44C can handle protocol framing, command filtering, status-register logic, and interface handshaking in communication-adapter hardware. Its 36 macrocells are sufficient for multiple finite state machines and bit-level control functions, while the 32 user I/O pins support parallel data, control, and interrupt paths. The device's JTAG programming supports production programming and board debug, and its nonvolatile configuration ensures consistent behavior after power cycles. Designers should define clock domains carefully, add reset synchronization, and use the 10 ns timing grade only where all external transceiver and connector delays have been included.

🖥️

Memory and Address Decoding

The XC9536XL-10VQ44C is suited to address decoding, chip-select generation, register overlays, and simple memory-interface sequencing in legacy embedded systems. Thirty-two user I/O pins permit the device to manage multiple address, select, acknowledge, and interrupt signals while keeping the implementation compact. The 10 ns grade and 800 usable gates provide ample room for decoder logic and supervisory state machines in many control applications. Confirm memory access times, bus turnaround requirements, and contention behavior in system-level timing analysis. For reduced timing margin or more critical decode paths, the 7 ns XC9536XL option may offer additional margin.

📈

Data Acquisition and Signal Conditioning

The XC9536XL-10VQ44C can implement digital conditioning around sensors, converters, and data-acquisition front ends. Suitable functions include sample sequencing, channel selection, threshold logic, latch coordination, and host-interface control. The 32 user I/O pins and 36 macrocells allow a compact acquisition controller to be implemented without a larger programmable-logic device, while the nonvolatile configuration supports repeatable startup behavior. Input thresholds, signal polarity, isolation boundaries, and sampling timing must be reviewed independently of the CPLD logic. The commercial C-grade target is suitable where operating temperature remains within its specified limits; industrial equipment may require the I-grade option.

סיכום מוצרים מומלצים

XC9536XL-10VQ44I AMD בשימוש ב-: Industrial Control Glue Logic, Legacy Peripheral Interface Bridging, Encoder Counter and Pulse Processing, Data Acquisition and Signal Conditioning XC9536XL-10VQG44C Same-family 44-pin VQFP configuration alternative בשימוש ב-: Industrial Control Glue Logic XC9536XL-15VQG44C Same-family option when a 15 ns timing grade is sufficient בשימוש ב-: Legacy Peripheral Interface Bridging, Memory and Address Decoding XC9536XL-7VQG44C Faster 7 ns option for timing-critical pulse paths בשימוש ב-: Encoder Counter and Pulse Processing, Communication Interface Control, Memory and Address Decoding, Data Acquisition and Signal Conditioning XC9536XL-10VQG44I Same-family industrial-temperature option בשימוש ב-: Communication Interface Control
What are the key specifications of XC9536XL-10VQ44C that engineers should know?
The XC9536XL-10VQ44C is a 36-macrocell, in-system-programmable CPLD with approximately 800 usable gates, 32 user I/O pins, a 10 ns propagation-delay grade, and a 44-pin VQFP package. According to the AMD DS058 datasheet, it supports JTAG programming, a minimum of 10,000 program and erase cycles, and at least 20 years of data retention. These characteristics make it suitable for compact glue logic, control functions, state machines, and legacy interface implementations requiring nonvolatile configuration.
Where can I download the XC9536XL-10VQ44C datasheet PDF?
The XC9536XL-10VQ44C datasheet PDF is available through the official AMD/Xilinx semiconductor document server at https://www.xilinxsemi.com/datasheet/xilinxsemi/XC9536XL-10VQ44C.pdf. The family-level DS058 document also contains the XC9536XL architecture, electrical characteristics, package drawings, configuration information, and ordering tables. Use the exact XC9536XL-10VQ44C PDF when checking the specific package code and commercial-grade ordering information.
Where can I find the XC9536XL pinout and package information?
The XC9536XL pinout, pin numbers, package drawing, and connection tables are in the pin-configuration section of the AMD DS058 family datasheet. The XC9536XL-10VQ44C uses a 44-pin VQFP package, designated VQ44 in the ordering code. Because a complete machine-readable pin table for this exact ordering code is not reproduced on this page, use the manufacturer pinout and footprint drawing during schematic capture and PCB layout.
Is the XC9536XL-10VQ44C still active?
The XC9536XL-10VQ44C remains listed as an orderable AMD CPLD, and the manufacturer continues to provide its dedicated datasheet and family documentation. The exact lifecycle label is not stated on the manufacturer page used here, so procurement planning should confirm current ordering status and delivery schedules through the Request a Quote form on this page. The device is also commonly found in inventory listings, but temporary inventory availability does not define its formal lifecycle status.
What can replace the XC9536XL-10VQ44C?
The closest drop-in candidates are speed- and temperature-qualified XC9536XL devices in the same 44-pin VQFP family, including XC9536XL-10VQ44I, XC9536XL-10VQG44I, XC9536XL-10VQG44C, XC9536XL-7VQG44C, and XC9536XL-15VQG44C. According to the AMD DS058 ordering structure, the suffix choices determine speed, package coding, and temperature grade. Confirm the exact pinout, configuration file, and operating-temperature requirements before treating any of these as a replacement.
Can XC9536XL-10VQG44C replace XC9536XL-10VQ44C?
XC9536XL-10VQG44C can serve as a same-family drop-in candidate because both devices are XC9536XL 36-macrocell devices with a 10 ns speed grade and a 44-pin VQFP package. The primary differences are ordering-code and temperature-option details, so its suitability depends on the exact VQG package code and commercial-temperature requirements. Verify the pin table, PCB footprint, temperature grade, and device markings in the AMD DS058 datasheet before production use.
What is the difference between XC9536XL-10VQ44C and XC9536XL-10VQ44I?
Both devices use the 10 ns XC9536XL speed grade and the same 44-pin VQFP package, with 36 macrocells and 32 user I/O pins. The visible ordering difference is the final temperature designation: C identifies the commercial option, while I identifies the industrial option. According to the AMD DS058 ordering information, the industrial version is intended for a wider operating-temperature environment. For a commercial-temperature design, the target suffix remains the direct ordering choice.
When should I choose XC9536XL-10VQ44C over a 7 ns XC9536XL option?
Choose XC9536XL-10VQ44C when a 10 ns propagation-delay grade satisfies the design timing while preserving the 36-macrocell XC9500XL resource level and 44-pin VQFP footprint. A 7 ns option, such as XC9536XL-7VQG44C, can provide additional timing margin for critical paths. The faster grade does not change the underlying architecture, so selection should be based on required timing rather than speed alone. Check every external interface constraint in the system timing budget.
Is XC9536XL-10VQ44C suitable for industrial control and legacy interface boards?
The XC9536XL-10VQ44C is suitable for commercial-temperature industrial and legacy interface designs that need 32 user I/O pins, nonvolatile configuration, and moderate logic density. Its 10 ns grade supports many glue-logic, state-machine, decoding, and interface-control tasks. The C suffix denotes the commercial temperature option, so an extended-temperature industrial enclosure may require the I-grade XC9536XL-10VQ44I instead. Review signal levels, timing, and environmental requirements during qualification.
How does the XC9536XL-10VQ44C compare with XC9536-10VQ44C?
XC9536XL-10VQ44C belongs to the XC9500XL high-performance CPLD family and provides 36 macrocells, approximately 800 usable gates, 32 user I/O pins, and a 10 ns propagation-delay grade. The XC9536-10VQ44C is from the earlier XC9500 naming family and should not be assumed to be a direct replacement without detailed comparison. The XL family documents extended features such as bus-hold behavior and modern in-system programming support, so migration requires reviewing the complete device specifications.
Where can I buy XC9536XL-10VQ44C online?
The XC9536XL-10VQ44C can be requested through the Request a Quote form on this XAIPART page. Supply the exact MPN XC9536XL-10VQ44C, the required quantity, and any date-code or traceability constraints. The form is the appropriate route for current commercial terms, lead time, stock confirmation, and shipping requirements, and it avoids relying on a potentially stale catalog price.
What is the price of XC9536XL-10VQ44C?
Use the Request a Quote form on this page for the current commercial price of XC9536XL-10VQ44C. Pricing depends on quantity, inventory, date-code requirements, packaging, and current market conditions, so a static figure can become stale. The structured purchasing options on this page are intended to provide the applicable quotation directly for the exact manufacturer ordering code.
What is the lead time for XC9536XL-10VQ44C?
Current lead time for XC9536XL-10VQ44C should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, authorized-channel inventory, allocation status, and required traceability. Include your target quantity and production schedule when requesting the quotation so the supply response can reflect the actual assembly plan rather than a generic quantity-one estimate.
Is XC9536XL-10VQ44C in stock?
Current stock for XC9536XL-10VQ44C must be confirmed through the Request a Quote form on this page because marketplace inventory can change without notice. Provide the required quantity, acceptable date codes, packaging preference, and target delivery date. XAIPART will use those requirements to identify an appropriate supply option and provide a current availability and lead-time response for the exact MPN.
What programming tools and interfaces does the XC9536XL-10VQ44C use?
The XC9536XL-10VQ44C supports in-system programming through its JTAG configuration interface. AMD/Xilinx ISE DesignSuite is the traditional software environment associated with the XC9500XL family, while the exact cable, driver, and device support should be checked against the installed tool version. Verify the JTAG chain, programming voltage, pull devices, and board connector in the hardware design before attempting in-circuit programming.

נתוני עזר הנדסיים עבור XC9536XL-10VQ44C — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose XC9536XL-10VQ44C for a commercial-temperature design that needs a 36-macrocell XC9500XL CPLD, 32 user I/O pins, JTAG in-system programming, and a 10 ns propagation-delay grade in a 44-pin VQFP footprint. Choose XC9536XL-10VQ44I when the same timing and logic resources are required over an extended industrial temperature range. Choose XC9536XL-10VQG44C when its package-ordering code matches the qualification record or BOM configuration. Select XC9536XL-7VQG44C for critical paths needing 3 ns additional timing margin, but confirm that the extra speed grade is justified. XC9536XL-15VQG44C is appropriate only when 10 ns is unnecessary and lower-speed qualification is preferable. Before replacing any option, compare the complete AMD ordering table, DS058 pin configuration, electrical limits, temperature grade, and PCB footprint rather than relying on the macrocell count alone.

השוואה עם חלופות

פרמטר מוצר זה XC9536XL-10VQ44I XC9536XL-10VQG44I XC9536XL-10VQG44C XC9536XL-7VQG44C XC9536XL-15VQG44C
Brand AMD AMD AMD AMD AMD AMD
Package 44-pin VQFP 44-pin VQFP 44-pin VQFP 44-pin VQFP 44-pin VQFP 44-pin VQFP
Macrocell Count 36 macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells
Usable Gates 800 gates 800 gates 800 gates 800 gates 800 gates 800 gates
User I/O Pins 32 user I/O pins 32 user I/O pins 32 user I/O pins 32 user I/O pins 32 user I/O pins 32 user I/O pins
Propagation Delay 10 ns 10 ns 10 ns 10 ns 7 ns 15 ns
Programmability In-system programmable via JTAG In-system programmable via JTAG In-system programmable via JTAG In-system programmable via JTAG In-system programmable via JTAG In-system programmable via JTAG
Temperature Option Commercial Industrial Industrial Commercial Commercial Commercial

מבדילים עיקריים

  • Exact 10 ns timing grade with 32 user I/O pins (לעומתXC9536XL-15VQG44C)
  • Faster performance margin than the 15 ns family option (לעומתXC9536XL-15VQG44C)
  • Commercial-grade exact ordering code (לעומתXC9536XL-10VQ44I)
  • Balanced timing performance without faster-grade power or sourcing trade-offs (לעומתXC9536XL-7VQG44C)

הערות תכנון

Use the DS058 VQ44 footprint and pin table as the controlling mechanical references for PCB layout. Confirm pad dimensions, solder-mask definition, paste geometry, and exposed or removed-pin status against the package drawing rather than scaling a generic 44-pin footprint. Preserve adequate clearance around power and ground pins and route sensitive programming or clock signals away from high-current switching traces. A footprint that matches visually can still differ in pad numbering or thermal-pad treatment.

Follow the manufacturer’s recommended supply decoupling and power-pin connection sequence, placing the closest decoupling capacitor directly beside the applicable supply and ground pins. Keep return-current paths short and use a continuous ground plane where the board stack-up permits. Review the DS058 electrical tables for the exact core and I/O supply values, their sequencing requirements, and the permissible input levels. The advertised 5 V-tolerant I/O capability does not remove the need to verify each signal’s voltage domain.

Do not assume that every XC9536XL ordering suffix is interchangeable merely because the macrocell count and nominal VQFP pin count match. The speed grade changes timing margin, the C or I suffix changes temperature qualification, and package codes can reflect different ordering conventions. Before substitution, compare the full ordering table, pin configuration, electrical tables, and PCB footprint. For the target’s 10 ns commercial-grade requirements, the 10 ns I-grade part is preferable to a 7 ns or 15 ns grade when those differences do not improve the design.

Design JTAG programming access as a deliberate board feature: keep the chain accessible, define connector voltage levels, account for signal direction at the device, and provide the pull devices required by the configuration circuit. If the JTAG path also crosses noisy power or motor-control areas, use controlled routing and appropriate return paths. Validate the chain with an ISE-compatible cable and programming setup before relying on field programming, especially where a failed configuration could disable critical board functions.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The exact XC9536XL-10VQ44C listing does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. A related XC9536XL-10VQG44C listing is identified as RoHS compliant and lead-free, but that statement is not transferred to the target ordering code. The device is an industrial/commercial programmable-logic IC rather than an AEC-Q100 automotive-qualified device.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

xc9536xl datasheet xc9536xl 10vqg44c xc9536xl 10vqg44i xc9536xl pinout xc9536xl 7vqg44c XC9536XL-10VQ44C datasheet XC9536XL-10VQ44C pinout XC9536XL-10VQ44C replacement XC9536XL-10VQ44C equivalent XC9536XL-10VQ44C vs XC9536XL-10VQ44I XC9536XL-10VQ44C VQFP44 footprint XC9536XL-10VQ44C programming AMD XC9536XL-10VQ44C CPLD XC9536XL-10VQ44C price XC9536XL-10VQ44C stock

רכיבים ומונחים קשורים

AMD Xilinx XC9536XL-10VQ44C XC9536XL-10VQ44I XC9536XL-10VQG44I XC9536XL-10VQG44C XC9536XL-7VQG44C XC9536XL-15VQG44C XC9500XL CPLD complex programmable logic device programmable logic device semiconductor 36 macrocells 800 usable gates 32 user I/O pins 44-pin VQFP surface mount JTAG in-system programming 10 ns propagation delay nonvolatile configuration memory bus hold industrial control legacy interface
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר