XCKU5P-L2SFVB784E - Kintex UltraScale+ FPGA | AMD
N.º da peça: XCKU5P-L2SFVB784E ✓ AtivoXCKU5P-L2SFVB784E Visão geral
A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. Within the programmable-logic hierarchy, an FPGA sits above simple fixed-function logic and offers parallel hardware implementation for control paths, data acquisition, packet processing, and signal transformation. Kintex UltraScale+ devices combine programmable logic fabric, block RAM, DSP resources, high-speed transceivers, and programmable I/O in one integrated device. The XCKU5P family targets performance and resource density between lower-complexity devices and larger UltraScale+ implementations.
The XCKU5P-L2SFVB784E provides 304 I/O in a 784-ball FCBGA package and uses the -2 speed designation. Its large ball-count package supports dense connections among power rails, ground, configuration signals, user I/O, and high-speed interfaces. The L2 ordering code also identifies a specific power and temperature-oriented grade within the XCKU5P family; confirm the exact limits and timing assumptions against the AMD device documentation before design release.
The principal engineering benefit is integration. Parallel programmable pipelines can execute multiple tasks concurrently, reducing the need for external processors, FPGAs, and discrete interface devices. On-chip memory and DSP resources can support buffering, filtering, modulation, error correction, and real-time control. The -2 grade should be evaluated against the device timing tables when a design uses high-performance interfaces or demanding clock domains, because the clock, speed grade, voltage, and temperature conditions jointly determine timing margin.
Typical uses include high-speed data acquisition, industrial automation, radar and communications infrastructure, test-and-measurement systems, network packet processing, and embedded control platforms. In these applications, the FPGA can implement parallel interfaces, protocol handling, digital filtering, and control logic while external serial transceivers handle physical-layer signaling. Any replacement must be checked for package-ball compatibility, supported power rails, configuration behavior, memory resources, transceiver characteristics, and timing constraints.
The most important design step is to treat the 784-ball FCBGA as a complete system-in-package design. Follow the AMD pinout, power, and layout guidance for ball assignment, voltage sequencing, decoupling, thermal management, and high-speed routing. Validate the selected bitstream, constraints, timing, and board-level power integrity across the intended voltage and temperature range before production.
This page organizes the XCKU5P-L2SFVB784E identification, package details, search-focused technical questions, same-family drop-in candidates, application guidance, and design cautions. It focuses on engineering selection and implementation considerations that are not apparent from a distributor catalog entry alone.
Alternativas drop-in para XCKU5P-L2SFVB784E — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XCKU5P-L2SFVB784E (mesmo formato e footprint) — diferindo em Package, Device Category, Mounting Type, Speed Grade.
XCKU5P-2SFVB784E
✅ Drop-InConsulte o preço
Ver ficha técnica →XCKU5P-1SFVB784E
✅ Drop-InConsulte o preço
XCKU5P-3SFVB784E
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XCKU5P-L1SFVB784E
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XCKU5P-L3SFVB784E
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XCKU5P-L2SFVB784E Classificações máximas e características elétricas
| Product Type | Kintex UltraScale+ FPGA |
| Device Family | XCKU5P |
| Performance Designation | -2 |
| I/O Count | 304 I/O |
| Encapsulamento | 784-BFBGA FCBGA |
| Ball Count | 784 balls |
| Programmable Logic Type | Field-programmable gate array |
| Listed Logic Resource Figure | 41,984,000 |
| Listed Resource Figure | 474,600 |
| Technology | UltraScale+ |
| Device Category | Field Programmable Gate Array |
| Tipo de montagem | Surface mount, FCBGA |
| Terminals | 784 terminals |
| Package Shape | Square |
Guia de Configuração de Pinos do XCKU5P-L2SFVB784E square
Configuração de pinos para XCKU5P-L2SFVB784E (pacote square). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XCKU5P-L2SFVB784E.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XCKU5P-L2SFVB784E é adequado para 6 aplicaçãos: High-Speed Data Acquisition, Industrial Automation and Control, Communications Infrastructure, Test and Measurement, Embedded Signal Processing, Aerospace and Defense Systems.
High-Speed Data Acquisition
The XCKU5P-L2SFVB784E fits parallel data-acquisition systems that require deterministic control, buffering, and processing beside the converter interface. Its 304 I/O positions provide substantial board-level connectivity, while the 784-ball FCBGA supports the dense power and signal routing expected in high-performance FPGA designs. Parallel programmable pipelines can acquire multiple channels, perform digital filtering, and transfer results without repeated host intervention. The -2 performance designation must be checked against the critical clock and I/O timing paths, and external ADC or DAC devices may still be required for analog conversion.
Recomendado
Industrial Automation and Control
The XCKU5P-L2SFVB784E is suitable for industrial controllers that combine deterministic timing, extensive I/O, communication protocols, and real-time signal processing. Programmable logic can execute machine-state control, motion sequencing, diagnostics, and data acquisition concurrently, reducing reliance on multiple processors and FPGAs. The 304-I/O device provides a practical connection foundation for digital sensors, actuators, counters, and field-bus transceivers. Industrial qualification, supported temperature range, isolation, EMC design, and long-term availability should be confirmed for each deployment rather than inferred from the package designation.
Recomendado
Communications Infrastructure
The XCKU5P-L2SFVB784E can implement high-throughput communications functions such as packet classification, framing, buffering, error handling, and traffic shaping. Its Kintex UltraScale+ architecture and 304 I/O positions suit parallel data paths, control-plane processing, and systems using external line-rate transceivers. Designers should partition timing-critical interfaces between the FPGA fabric and dedicated I/O resources, then verify each clock domain against the -2 timing tables. High-speed differential routing also requires a board stack-up with controlled impedance and continuous return paths.
Recomendado
Test and Measurement
The XCKU5P-L2SFVB784E is appropriate for modular test systems that require parallel stimulus generation, pattern processing, timing control, and real-time analysis. The FPGA can coordinate multiple instrument functions, perform digital filtering, and maintain deterministic sequencing while the 784-ball FCBGA supports the high pin count normally required by wide parallel buses. Clock jitter, I/O standards, output timing, and power-supply sequencing are central to repeatable measurements. A complete timing budget should include external instrument delay, board propagation, and FPGA internal uncertainty.
Recomendado
Embedded Signal Processing
The XCKU5P-L2SFVB784E supports embedded signal-processing workloads that benefit from parallel logic, dedicated arithmetic resources, and deterministic response. Suitable functions include digital filtering, modulation, demodulation, spectral processing, and adaptive control. Using on-chip programmable resources can reduce external memory and processor overhead when the data path can be partitioned into parallel channels. Engineers should map arithmetic to DSP resources where beneficial, constrain critical pipelines for the selected -2 grade, and account for the clock-power relationship. External memory interface timing and board-level signal integrity remain central implementation considerations.
Recomendado
Aerospace and Defense Systems
The XCKU5P-L2SFVB784E can serve as the programmable core in mission-critical aerospace, defense, and space systems requiring parallel processing and deterministic I/O. Candidate functions include radar signal conditioning, navigation-data processing, secure communication framing, and real-time control. The high-density 784-ball FCBGA places substantial electrical and thermal demands on the board, requiring controlled power delivery, extensive decoupling, and careful heat spreading. Before selection, engineers should confirm the exact environmental grade, radiation qualification, temperature range, lifecycle status, and export-control requirements from the applicable AMD documentation.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XCKU5P-L2SFVB784E — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XCKU5P-2SFVB784E | XCKU5P-1SFVB784E | XCKU5P-3SFVB784E | XCKU5P-L1SFVB784E | XCKU5P-L3SFVB784E |
|---|---|---|---|---|---|---|
| Package | 784-BFBGA FCBGA | 784-BFBGA FCBGA | 784-BFBGA FCBGA | 784-BFBGA FCBGA | 784-BFBGA FCBGA | 784-BFBGA FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Kintex UltraScale+ XCKU5P | Kintex UltraScale+ XCKU5P | Kintex UltraScale+ XCKU5P | Kintex UltraScale+ XCKU5P | Kintex UltraScale+ XCKU5P | Kintex UltraScale+ XCKU5P |
| Performance Designation | -2 | -2 | -1 | -3 | -1 | -3 |
| Grade Designation | L2 | Standard -2 | Standard -1 | Standard -3 | L1 | L3 |
| Special Features | L2 grade designation | Standard -2 grade | Lower speed designation | Higher speed designation | L-series lower speed designation | L-series higher speed designation |
Principais diferenciais
- L2 grade designation distinguishes the target from the standard -2 order code (vs XCKU5P-2SFVB784E)
- Balanced -2 timing class for the target design (vs XCKU5P-1SFVB784E)
- Lower timing demand than the -3 speed grade (vs XCKU5P-3SFVB784E)
Notas de projeto
Treat the 784-ball FCBGA as a high-density, multilayer routing problem. Follow the AMD package pinout file and board-design guidance for ball assignments, power islands, decoupling, via-in-pad construction, and high-speed escape routing. Maintain a continuous ground reference beneath every high-speed signal and design the stack-up for the required loss, skew, and impedance targets before placing the FPGA.
Plan the complete power tree before schematic capture. Separate core, auxiliary, I/O, and configuration rails as required by the device, validate source impedance, and implement the manufacturer's sequencing recommendations. Place high-frequency ceramic decoupling close to the supply and ground balls, then verify droop, noise, and startup behavior at the highest expected activity and temperature.
The 784-ball FCBGA has a large power-delivery and heat-dissipation burden. Use the AMD thermal design guidance and preserve a continuous thermal path through the package substrate, board layers, vias, and heat-spreader structure. Analyze junction temperature under worst-case utilization rather than nominal activity, and validate the assembled board with thermal imaging or a calibrated thermocouple before production.
Apply endpoint-aware constraints to every external interface and clock. High-speed I/O performance depends on device speed grade, voltage, temperature, board loss, return-path continuity, and clock quality, so a nominal pin count does not guarantee margin. Run post-route timing and signal-integrity simulations with realistic component models, then reserve measurement points for validation on the first production article.
Informações de conformidade
Compliance and environmental qualification require confirmation for the exact XCKU5P-L2SFVB784E order code. The commercial catalog excerpt identifies the device family, I/O count, speed designation, and package but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.