XCKU5P-L2SFVB784E - Kintex UltraScale+ FPGA | AMD
Teilenummer: XCKU5P-L2SFVB784E ✓ AktivXCKU5P-L2SFVB784E Übersicht
A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. Within the programmable-logic hierarchy, an FPGA sits above simple fixed-function logic and offers parallel hardware implementation for control paths, data acquisition, packet processing, and signal transformation. Kintex UltraScale+ devices combine programmable logic fabric, block RAM, DSP resources, high-speed transceivers, and programmable I/O in one integrated device. The XCKU5P family targets performance and resource density between lower-complexity devices and larger UltraScale+ implementations.
The XCKU5P-L2SFVB784E provides 304 I/O in a 784-ball FCBGA package and uses the -2 speed designation. Its large ball-count package supports dense connections among power rails, ground, configuration signals, user I/O, and high-speed interfaces. The L2 ordering code also identifies a specific power and temperature-oriented grade within the XCKU5P family; confirm the exact limits and timing assumptions against the AMD device documentation before design release.
The principal engineering benefit is integration. Parallel programmable pipelines can execute multiple tasks concurrently, reducing the need for external processors, FPGAs, and discrete interface devices. On-chip memory and DSP resources can support buffering, filtering, modulation, error correction, and real-time control. The -2 grade should be evaluated against the device timing tables when a design uses high-performance interfaces or demanding clock domains, because the clock, speed grade, voltage, and temperature conditions jointly determine timing margin.
Typical uses include high-speed data acquisition, industrial automation, radar and communications infrastructure, test-and-measurement systems, network packet processing, and embedded control platforms. In these applications, the FPGA can implement parallel interfaces, protocol handling, digital filtering, and control logic while external serial transceivers handle physical-layer signaling. Any replacement must be checked for package-ball compatibility, supported power rails, configuration behavior, memory resources, transceiver characteristics, and timing constraints.
The most important design step is to treat the 784-ball FCBGA as a complete system-in-package design. Follow the AMD pinout, power, and layout guidance for ball assignment, voltage sequencing, decoupling, thermal management, and high-speed routing. Validate the selected bitstream, constraints, timing, and board-level power integrity across the intended voltage and temperature range before production.
This page organizes the XCKU5P-L2SFVB784E identification, package details, search-focused technical questions, same-family drop-in candidates, application guidance, and design cautions. It focuses on engineering selection and implementation considerations that are not apparent from a distributor catalog entry alone.
Drop-in-Alternativen für XCKU5P-L2SFVB784E – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XCKU5P-L2SFVB784E (gleiche Bauform und Footprint) – abweichend in Package, Device Category, Mounting Type, Speed Grade.
XCKU5P-2SFVB784E
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XCKU5P-1SFVB784E
✅ Drop-InPreis auf Anfrage
XCKU5P-3SFVB784E
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XCKU5P-L1SFVB784E
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XCKU5P-L3SFVB784E
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XCKU5P-L2SFVB784E Grenzwerte & elektrische Eigenschaften
| Product Type | Kintex UltraScale+ FPGA |
| Device Family | XCKU5P |
| Performance Designation | -2 |
| I/O Count | 304 I/O |
| Gehäuse | 784-BFBGA FCBGA |
| Ball Count | 784 balls |
| Programmable Logic Type | Field-programmable gate array |
| Listed Logic Resource Figure | 41,984,000 |
| Listed Resource Figure | 474,600 |
| Technology | UltraScale+ |
| Device Category | Field Programmable Gate Array |
| Montageart | Surface mount, FCBGA |
| Terminals | 784 terminals |
| Package Shape | Square |
XCKU5P-L2SFVB784E square Pinbelegungsleitfaden
Pinbelegung für XCKU5P-L2SFVB784E (square-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XCKU5P-L2SFVB784E.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XCKU5P-L2SFVB784E ist geeignet für 6 Anwendungs: High-Speed Data Acquisition, Industrial Automation and Control, Communications Infrastructure, Test and Measurement, Embedded Signal Processing, Aerospace and Defense Systems.
High-Speed Data Acquisition
The XCKU5P-L2SFVB784E fits parallel data-acquisition systems that require deterministic control, buffering, and processing beside the converter interface. Its 304 I/O positions provide substantial board-level connectivity, while the 784-ball FCBGA supports the dense power and signal routing expected in high-performance FPGA designs. Parallel programmable pipelines can acquire multiple channels, perform digital filtering, and transfer results without repeated host intervention. The -2 performance designation must be checked against the critical clock and I/O timing paths, and external ADC or DAC devices may still be required for analog conversion.
Empfohlen
Industrial Automation and Control
The XCKU5P-L2SFVB784E is suitable for industrial controllers that combine deterministic timing, extensive I/O, communication protocols, and real-time signal processing. Programmable logic can execute machine-state control, motion sequencing, diagnostics, and data acquisition concurrently, reducing reliance on multiple processors and FPGAs. The 304-I/O device provides a practical connection foundation for digital sensors, actuators, counters, and field-bus transceivers. Industrial qualification, supported temperature range, isolation, EMC design, and long-term availability should be confirmed for each deployment rather than inferred from the package designation.
Empfohlen
Communications Infrastructure
The XCKU5P-L2SFVB784E can implement high-throughput communications functions such as packet classification, framing, buffering, error handling, and traffic shaping. Its Kintex UltraScale+ architecture and 304 I/O positions suit parallel data paths, control-plane processing, and systems using external line-rate transceivers. Designers should partition timing-critical interfaces between the FPGA fabric and dedicated I/O resources, then verify each clock domain against the -2 timing tables. High-speed differential routing also requires a board stack-up with controlled impedance and continuous return paths.
Empfohlen
Test and Measurement
The XCKU5P-L2SFVB784E is appropriate for modular test systems that require parallel stimulus generation, pattern processing, timing control, and real-time analysis. The FPGA can coordinate multiple instrument functions, perform digital filtering, and maintain deterministic sequencing while the 784-ball FCBGA supports the high pin count normally required by wide parallel buses. Clock jitter, I/O standards, output timing, and power-supply sequencing are central to repeatable measurements. A complete timing budget should include external instrument delay, board propagation, and FPGA internal uncertainty.
Empfohlen
Embedded Signal Processing
The XCKU5P-L2SFVB784E supports embedded signal-processing workloads that benefit from parallel logic, dedicated arithmetic resources, and deterministic response. Suitable functions include digital filtering, modulation, demodulation, spectral processing, and adaptive control. Using on-chip programmable resources can reduce external memory and processor overhead when the data path can be partitioned into parallel channels. Engineers should map arithmetic to DSP resources where beneficial, constrain critical pipelines for the selected -2 grade, and account for the clock-power relationship. External memory interface timing and board-level signal integrity remain central implementation considerations.
Empfohlen
Aerospace and Defense Systems
The XCKU5P-L2SFVB784E can serve as the programmable core in mission-critical aerospace, defense, and space systems requiring parallel processing and deterministic I/O. Candidate functions include radar signal conditioning, navigation-data processing, secure communication framing, and real-time control. The high-density 784-ball FCBGA places substantial electrical and thermal demands on the board, requiring controlled power delivery, extensive decoupling, and careful heat spreading. Before selection, engineers should confirm the exact environmental grade, radiation qualification, temperature range, lifecycle status, and export-control requirements from the applicable AMD documentation.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XCKU5P-L2SFVB784E – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XCKU5P-2SFVB784E | XCKU5P-1SFVB784E | XCKU5P-3SFVB784E | XCKU5P-L1SFVB784E | XCKU5P-L3SFVB784E |
|---|---|---|---|---|---|---|
| Package | 784-BFBGA FCBGA | 784-BFBGA FCBGA | 784-BFBGA FCBGA | 784-BFBGA FCBGA | 784-BFBGA FCBGA | 784-BFBGA FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Kintex UltraScale+ XCKU5P | Kintex UltraScale+ XCKU5P | Kintex UltraScale+ XCKU5P | Kintex UltraScale+ XCKU5P | Kintex UltraScale+ XCKU5P | Kintex UltraScale+ XCKU5P |
| Performance Designation | -2 | -2 | -1 | -3 | -1 | -3 |
| Grade Designation | L2 | Standard -2 | Standard -1 | Standard -3 | L1 | L3 |
| Special Features | L2 grade designation | Standard -2 grade | Lower speed designation | Higher speed designation | L-series lower speed designation | L-series higher speed designation |
Wichtigste Unterscheidungsmerkmale
- L2 grade designation distinguishes the target from the standard -2 order code (vs. XCKU5P-2SFVB784E)
- Balanced -2 timing class for the target design (vs. XCKU5P-1SFVB784E)
- Lower timing demand than the -3 speed grade (vs. XCKU5P-3SFVB784E)
Designhinweise
Treat the 784-ball FCBGA as a high-density, multilayer routing problem. Follow the AMD package pinout file and board-design guidance for ball assignments, power islands, decoupling, via-in-pad construction, and high-speed escape routing. Maintain a continuous ground reference beneath every high-speed signal and design the stack-up for the required loss, skew, and impedance targets before placing the FPGA.
Plan the complete power tree before schematic capture. Separate core, auxiliary, I/O, and configuration rails as required by the device, validate source impedance, and implement the manufacturer's sequencing recommendations. Place high-frequency ceramic decoupling close to the supply and ground balls, then verify droop, noise, and startup behavior at the highest expected activity and temperature.
The 784-ball FCBGA has a large power-delivery and heat-dissipation burden. Use the AMD thermal design guidance and preserve a continuous thermal path through the package substrate, board layers, vias, and heat-spreader structure. Analyze junction temperature under worst-case utilization rather than nominal activity, and validate the assembled board with thermal imaging or a calibrated thermocouple before production.
Apply endpoint-aware constraints to every external interface and clock. High-speed I/O performance depends on device speed grade, voltage, temperature, board loss, return-path continuity, and clock quality, so a nominal pin count does not guarantee margin. Run post-route timing and signal-integrity simulations with realistic component models, then reserve measurement points for validation on the first production article.
Compliance-Informationen
Compliance and environmental qualification require confirmation for the exact XCKU5P-L2SFVB784E order code. The commercial catalog excerpt identifies the device family, I/O count, speed designation, and package but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.