XMC4502F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
N.º da peça: XMC4502F100K768ACXQMA1 ✓ AtivoXMC4502F100K768ACXQMA1 Visão geral
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The XMC4502F100K768ACXQMA1 belongs to the hierarchy of 32-bit MCU, Arm Cortex-M4 microcontroller, embedded processor, and semiconductor. Its 768 KB flash provides program storage for control software and protocol handlers, while 160 KB of RAM supports working memory, diagnostics, and network data buffers.
Key features include a 120 MHz Arm Cortex-M4 core, 768 KB of flash, 160 KB of RAM, an FPU, and Ethernet MAC connectivity. The Ethernet MAC is significant for industrial Ethernet equipment because it allows network communication to be added to a control platform without relying on a discrete network interface. The XMC4000 family also provides configurable peripherals that can be adapted to different industrial application requirements.
The controller combines a 32-bit Arm architecture with Infineon industrial peripherals and communication capabilities. Its 768 KB flash is twice the 384 KB often associated with smaller general-purpose Cortex-M4 designs, while the stated 160 KB RAM gives application code additional working space for buffering and real-time processing. At 120 MHz, the core provides the timing headroom expected for protocol handling, digital control loops, and supervisory functions in industrial equipment.
Typical applications include industrial Ethernet controllers, factory automation equipment, motor and motion-control supervisory systems, networked sensors, building automation controllers, and industrial gateways. The Ethernet MAC and combination of flash, RAM, and real-time processing make the device appropriate for equipment that must execute control logic while exchanging data with supervisory systems.
Designers should preserve the pin assignments and exposed-pad requirements of the PG-LQFP-11 footprint and use the manufacturer datasheet for the complete pin-description table, electrical limits, and decoupling recommendations. Firmware and peripheral assignments should also be checked against the device ordering information because suffix codes identify specific package, temperature, and qualification variants.
This product page consolidates the confirmed controller specifications, package information, source links, engineering selection guidance, and clearly qualified replacement analysis. It focuses on practical distinctions among same-family Infineon ordering variants rather than presenting unverified cross-brand substitutions as drop-in choices.
Alternativas drop-in para XMC4502F100K768ACXQMA1 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XMC4502F100K768ACXQMA1 (mesmo formato e footprint) — diferindo em Package, Architecture, Package Type, Product Type.
XMC4502F100F768ACXQMA1
✅ Drop-InConsulte o preço
Ver ficha técnica →XMC4500F100K768ACXQMA1
✅ Drop-InConsulte o preço
Ver ficha técnica →XMC4502F100K768ACXQMA1 Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Microcontroller Family | XMC4000 |
| CPU Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 768 KB |
| Flash Organization | 768K x 8 |
| RAM | 160 KB |
| Floating-Point Unit | Present |
| Ethernet MAC | Present |
| Operating Voltage | 1.3 V / 3.3 V |
| Encapsulamento | PG-LQFP-100-11 |
| Package Type | 100-pin LQFP with exposed pad |
| Tipo de montagem | Surface mount |
| Industrial Qualification | Industrial |
Guia de Configuração de Pinos do XMC4502F100K768ACXQMA1 100-pin lqfp with exposed pad
Configuração de pinos para XMC4502F100K768ACXQMA1 (pacote 100-pin lqfp with exposed pad). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XMC4502F100K768ACXQMA1.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XMC4502F100K768ACXQMA1 é adequado para 6 aplicaçãos: Industrial Ethernet Control, Factory Automation Equipment, Motion-Control Supervisory System, Industrial Sensor Gateway, Building Automation Controller, Networked Power Conversion Monitor.
Industrial Ethernet Control
The XMC4502F100K768ACXQMA1 fits industrial Ethernet controllers because it combines a 120 MHz Arm Cortex-M4 core with an integrated Ethernet MAC. The 768 KB flash accommodates network stacks, control firmware, diagnostics, and configuration data, while 160 KB of RAM provides space for packet buffers and real-time working variables. Place the controller between the physical Ethernet interface and application-specific I/O. A production design must confirm PHY, clock, isolation, and magnetics requirements using the manufacturer hardware guidance. The principal benefit is consolidating deterministic control and network communication in one 100-pin LQFP device rather than separating the tasks across two processors.
Recomendado
Factory Automation Equipment
The XMC4502F100K768ACXQMA1 is suitable for factory automation controllers that execute sequencing logic while communicating with supervisory equipment. Its 120 MHz Cortex-M4 processing rate supports responsive control tasks, and the hardware floating-point unit assists applications that calculate process values. The 768 KB flash and 160 KB RAM provide a practical split between firmware storage and runtime working memory. Use configurable XMC4000 peripherals for time-critical inputs and outputs, then connect the Ethernet MAC to the appropriate physical network interface. Verify the controller ordering code against the factory’s temperature range and EMC requirements before production release.
Recomendado
Motion-Control Supervisory System
The XMC4502F100K768ACXQMA1 can serve as the supervisory controller in an industrial motion-control system, where it coordinates sequencing, diagnostics, communications, and safety-related monitoring around dedicated drive electronics. A 120 MHz Arm Cortex-M4 core provides useful headroom for control algorithms, while 768 KB flash supports substantial application code and 160 KB RAM supports state history and communication buffers. The Ethernet MAC allows the supervisory layer to exchange commands and status information with a machine network. The MCU should not replace a dedicated motor-drive IC where continuous current-loop control requires specialized analog and timing resources; instead, it complements the drive stage.
Recomendado
Industrial Sensor Gateway
The XMC4502F100K768ACXQMA1 is well matched to an industrial sensor gateway that must aggregate measurements, apply local filtering, and forward results over Ethernet. The 160 KB RAM provides room for sample buffers and protocol state, while the 768 KB flash supports gateway firmware, fieldbus handlers, and configuration data. Its 120 MHz Cortex-M4 core and hardware FPU can process sensor data locally without continuous cloud or host intervention. The Ethernet MAC handles the network-facing controller function, while configurable peripherals connect to sensors and communication transceivers. Validate latency, watchdog behavior, and power-loss recovery paths against the equipment safety and availability requirements.
Recomendado
Building Automation Controller
The XMC4502F100K768ACXQMA1 can be used in a building automation controller that coordinates lighting, HVAC, access-related monitoring, and networked building services. Its Ethernet MAC supports communication with supervisory infrastructure, while the 120 MHz Cortex-M4 core manages schedules, interlocks, alarms, and diagnostics. The 768 KB flash and 160 KB RAM are sufficient for embedded control firmware and moderate protocol buffering. Configure the XMC4000 peripherals for the required digital and analog monitoring functions, and isolate field wiring appropriately from the digital controller. Confirm operating temperature, isolation, and regulatory requirements for the intended building equipment before using the device as a certified building-control component.
Recomendado
Networked Power Conversion Monitor
The XMC4502F100K768ACXQMA1 is useful as a monitoring and communications controller in a networked power-conversion system. It can supervise operating states, log faults, implement protection sequencing, and report system data through its Ethernet MAC without performing the high-current power conversion itself. The 768 KB flash provides room for control firmware and diagnostic data structures, while 160 KB RAM supports calculations and communication buffers. Use the microcontroller’s configurable peripherals to monitor converter feedback signals and coordinate shutdown requests. The design must preserve separation between sensing, control, and hazardous power paths, and it must include independent protection for any safety-critical shutdown function.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XMC4502F100K768ACXQMA1 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XMC4502F100F768ACXQMA1 | XMC4500F100K768ACXQMA1 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | LQFP-100 |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Flash Memory | 768 KB | 768 KB | 768 KB |
| Industrial Positioning | Industrial XMC4000-family microcontroller | Industrial XMC4502-family microcontroller | XMC4500-family microcontroller |
| Ordering Code | XMC4502F100K768ACXQMA1 | XMC4502F100F768ACXQMA1 | XMC4500F100K768ACXQMA1 |
Principais diferenciais
- Higher memory capacity than the documented XMC4400 comparison candidate (vs XMC4400F100K512ABXQSA1)
- Ethernet MAC integrated into the XMC4502 industrial positioning (vs XMC4500F100K768ACXQMA1)
- Same confirmed core and memory class for order-code management (vs XMC4502F100F768ACXQMA1)
Notas de projeto
Follow the manufacturer land pattern for the PG-LQFP-100-11 package, including the exposed-pad connection, and verify it against the selected ordering code before releasing Gerber files. Place all required decoupling capacitors close to their associated supply pins and provide a continuous ground reference beneath the exposed pad. Because the device has 100 fine-pitch leads, inspect the assembled board under magnification for solder bridges and verify the pad connection with continuity and thermal-imaging checks.
Use the manufacturer’s recommended supply and decoupling configuration for both 1.3 V and 3.3 V operating conditions shown in the product comparison. Check the selected XMC4502-F100K768-AC datasheet for the exact core, I/O, and analog supply pins before assigning power rails. Keep switching regulators and high-current digital paths physically separated from sensitive analog areas, and validate startup, reset, and brownout behavior across the complete input-voltage range.
Do not treat matching package names, core frequency, or flash capacity as proof of a drop-in replacement. The F and K ordering codes must be checked for temperature-grade implications, while the XMC4500 and XMC4502 families can have different peripheral assignments. For every proposed substitution, compare the complete pin-description table, electrical characteristics, exposed-pad connection, peripheral multiplexing, clock setup, bootloader behavior, and device-identification registers.
The Ethernet MAC requires careful implementation at the board level even when the PHY is external. Follow the manufacturer reference layout for high-speed differential routing, impedance-controlled pairs, return paths, and isolation-component placement. Keep the Cortex-M4 debug interface accessible for production validation, and avoid routing noisy motor, switch-mode, or Ethernet isolation return currents beneath the MCU area. Add test points that allow clock, reset, supply, and communication status to be checked without redesigning the assembly.
Informações de conformidade
The device is identified as an industrial XMC4000-family microcontroller, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are present in the accessible product information.