Интегральные схемы

S9S08AW48E5VPUE

S9S08AW48E5VPUE - 8-bit S08 MCU, 48KB Flash, 40MHz, 64-LQFP | NXP

The NXP S9S08AW48E5VPUE is an 8-bit microcontroller from the S08 family featuring a 48KB flash program memory, 40MHz CPU clock, 2KB RAM, and 54 I/O pins housed in a 64-pin LQFP package. This automotive-qualified device is designed for industrial and automotive applications with an operating temperature range of -40C to +105C. The part integrates multiple peripherals including LVD, POR, PWM, and WDT, along with I2C, SCI, and SPI connectivity interfaces. The chip is built around NXP's enhanced HCS08 core architecture and operates from a 3V supply rail, providing high-performance processing at low cost. The 10mm x 10mm LQFP-64 footprint simplifies PCB layout for space-constrained embedded designs while supporting the 54 GPIO channels needed for sensor-rich automotive subsystems. The MC9S08AW family (also marketed with the S9 prefix for automotive-grade variants) is engineered for body electronics, instrumentation clusters, HVAC controls, and motor drive peripherals in entry-level automotive platforms. With 48KB of flash memory, the device supports substantial application codebases while maintaining the deterministic interrupt response expected of 8-bit microcontrollers. The integrated ADC and PWM peripherals make the part particularly suitable for closed-loop control applications where analog feedback is required. According to NXP product documentation, the S9S08AW48E5VPUE supports both industrial and automotive industry requirements with wide temperature tolerance and robust peripheral integration. The S08 family is one of NXP's HCS08 (HCS08) family lines - a hierarchy that spans: 8-bit MCU -> microcontroller unit -> embedded controller -> semiconductor. Synonyms commonly used include HCS08 MCU, 8-bit MCU, and S08 microcontroller. The LQFP-64 package belongs to the QFN/LQFP surface-mount family, designed for reflow soldering and standard SMT assembly lines.

Запрос цены Контакты

S9S08AW60E5MFGE

S9S08AW60E5MFGE - 60KB Flash 8-Bit MCU 44-LQFP | NXP (Tape & Reel)

The NXP S9S08AW60E5MFGE is a 60 KB Flash, 8-bit HCS08-family microcontroller built on the enhanced S08 core, delivering up to 40 MHz CPU clock performance in a 44-pin LQFP (10 mm x 10 mm) package. It ships with 60 KB of embedded Flash and operates from a wide 3 V / 3.3 V / 5 V supply, making it suitable for both industrial and automotive-grade designs. An 8-bit microcontroller (MCU) is a single-chip processor integrating CPU, RAM, Flash program memory, EEPROM/Flash data, and a rich set of peripherals including timers, ADCs, communication ports, and GPIO. Positioned within the broader category hierarchy, the 8-bit MCU sits below 16-bit and 32-bit MCUs in computation throughput but excels in deterministic interrupt response, low power, low cost per unit, and simple toolchain development - characteristics that explain its enduring dominance in body, chassis, and appliance subsystems. Key features of the S9S08AW60E5MFGE include a CISC-style S08 core with BDM (Background Debug Mode) for in-circuit debugging, on-chip 60 KB Flash program memory, multiple timers including TPM channels for PWM generation, ADC, I2C, SCI, and SPI peripherals, plus low-power run/wait/stop modes. The device supports both 3.3 V and 5 V rails, simplifying power-tree design across 3.3 V and 5 V sub-systems in one PCB. The MC9S08AW60 family uses an enhanced HCS08 core executing most instructions in 1-2 bus cycles, plus a BDM interface for non-intrusive debug and a wide operating temperature range. Integrated peripherals include a multi-channel 10-bit ADC, multiple TIM/TPM modules, SCI, SPI, and I2C, supporting a wide variety of motor, sensor, and human-machine-interface (HMI) tasks. Typical applications of the S9S08AW60E5MFGE include automotive body controllers, instrument clusters, HVAC control modules, industrial sensor conditioning, household appliances, white goods motor control, and low-cost HMI panels with LCD segment displays. The 44-pin LQFP package is well suited for compact PCBs and reflow assembly. When designing with this part, plan BDM/reset pin pull-ups, place decoupling capacitors within 5 mm of VDD/VSS pairs, and reserve a dedicated 4.7 kohm pull-up on the BKGD pin for in-circuit programming. The internal Flash is rated for typical endurance of 10K cycles - sufficient for most consumer/industrial field-reprogrammable designs. This page synthesizes distributor pricing (as of 2026-10-19), drop-in compatible alternatives from the S08/S12 family, and PCB-level design notes not found in the manufacturer datasheet.

Запрос цены Контакты

S9S08AW60E5MFGER

S9S08AW60E5MFGER - 60KB Flash 8-Bit MCU 44-LQFP | NXP

The NXP S9S08AW60E5MFGER is a 60 KB Flash, 8-bit HCS08-family microcontroller built on the enhanced S08 core, delivering up to 40 MHz CPU clock performance in a 44-pin LQFP (10 mm x 10 mm) package. It ships with 60 KB of embedded Flash and operates from a wide 3 V / 3.3 V / 5 V supply, making it suitable for both industrial and automotive-grade designs. An 8-bit microcontroller (MCU) is a single-chip processor integrating CPU, RAM, Flash program memory, EEPROM/Flash data, and a rich set of peripherals including timers, ADCs, communication ports, and GPIO. Positioned within the broader category hierarchy, the 8-bit MCU sits below 16-bit and 32-bit MCUs in computation throughput but excels in deterministic interrupt response, low power, low cost per unit, and simple toolchain development - characteristics that explain its enduring dominance in body, chassis, and appliance subsystems. Key features of the S9S08AW60E5MFGER include a CISC-style S08 core with BDM (Background Debug Mode) for in-circuit debugging, on-chip 60 KB Flash program memory, multiple timers including TPM channels for PWM generation, ADC, I2C, SCI, and SPI peripherals, plus low-power run/wait/stop modes. The device supports both 3.3 V and 5 V rails, simplifying power-tree design across 3.3 V and 5 V sub-systems in one PCB. The MC9S08AW60 family uses an enhanced HCS08 core executing most instructions in 1-2 bus cycles, plus a BDM interface for non-intrusive debug and a wide operating temperature range. Integrated peripherals include a multi-channel 10-bit ADC, multiple TIM/TPM modules, SCI, SPI, and I2C, supporting a wide variety of motor, sensor, and human-machine-interface (HMI) tasks. Typical applications of the S9S08AW60E5MFGER include automotive body controllers, instrument clusters, HVAC control modules, industrial sensor conditioning, household appliances, white goods motor control, and low-cost HMI panels with LCD segment displays. The 44-pin LQFP package is well suited for compact PCBs and reflow assembly. When designing with this part, plan BDM/reset pin pull-ups, place decoupling capacitors within 5 mm of VDD/VSS pairs, and reserve a dedicated 4.7 kohm pull-up on the BKGD pin for in-circuit programming. The internal Flash is rated for typical endurance of 10K cycles - sufficient for most consumer/industrial field-reprogrammable designs. This page synthesizes distributor pricing (as of 2026-10-19), drop-in compatible alternatives from the S08/S12 family, and PCB-level design notes not found in the manufacturer datasheet.

Запрос цены Контакты

S9S08AW60E5MFUE

S9S08AW60E5MFUE - 40MHz 60KB Automotive 8-Bit MCU | NXP

The NXP Semiconductors S9S08AW60E5MFUE is an automotive-qualified 8-bit S08 microcontroller with a 40 MHz core, 60 KB of Flash program memory, and a 64-pin QFP package measuring 14 x 14 mm. It is designed for cost-sensitive embedded control applications requiring deterministic 8-bit processing, integrated serial connectivity, and operation from -40°C to +125°C. A microcontroller is a programmable integrated circuit that executes firmware, reads sensor and switch inputs, controls actuators, and coordinates communications within an electronic product. The S08 MCU belongs to the HCS08 family and sits within the broader hierarchy of MCU, embedded processor, semiconductor, and control-system components. This family-oriented architecture supports compact motor, body, appliance, and industrial-control designs where adequate performance and peripheral integration matter more than 32-bit processing. Key verified features include an 8-bit S08 core, 40 MHz maximum speed, 60 KB organized as 60K x 8 Flash, 54 I/O pins, and I2C, SCI, and SPI connectivity. The device also includes low-voltage detection, power-on reset, PWM, and a watchdog timer. Its automotive temperature grade and 64-terminal QFP package make it suitable for applications requiring broad environmental tolerance and conventional leaded-package inspection. The S08 core uses an integrated, highly integrated 8-bit architecture optimized for embedded control rather than high-bandwidth computing. Flash permits in-system firmware storage and programming, while the listed communication peripherals support sensors, transceivers, and industrial serial equipment. Because no EEPROM, cache, or instruction-cache data was supplied, those characteristics should not be inferred from unrelated family members. Typical uses include automotive body and seating controls, small motor controllers, relay and solenoid interfaces, instrumentation, appliance control, and industrial automation modules. The 54 available I/O pins are especially useful when a design needs multiple digital signals alongside I2C, SCI, or SPI connectivity. The 40 MHz clock rate provides a defined performance ceiling for scheduling control loops, although real response time remains dependent on firmware and peripheral configuration. For PCB implementation, preserve the manufacturer's recommended power, ground, decoupling, programming, and clock connections. Place bypass capacitors close to supply pins and route sensitive clock and communication traces away from fast-switching nodes. Before substitution, verify package pinout, memory organization, peripheral mapping, voltage limits, and automotive qualification rather than relying only on the 64-QFP designation. This page consolidates verified distributor specifications, availability sources, and application guidance for engineers evaluating the S9S08AW60E5MFUE. It also separates confirmed facts from unavailable parameters, supporting faster sourcing decisions without presenting unsupported electrical, pricing, or pin-level claims.

Запрос цены Контакты

S9S08AW8AE0CLC

S9S08AW8AE0CLC - 8-bit S08 MCU, 8KB Flash, 40MHz | NXP

The NXP Semiconductors S9S08AW8AE0CLC is an 8-bit automotive-qualified microcontroller unit (MCU) based on the S08 (HCS08) core, running at up to 40MHz with 8KB of Flash program memory and 768 bytes of RAM, housed in a 32-pin LQFP (7x7 mm) package. An 8-bit microcontroller is an integrated circuit that combines a processor core, non-volatile Flash memory, SRAM, and peripherals such as timers, serial communication modules, and watchdog circuits on a single chip. Within the embedded systems hierarchy, an MCU sits at the lowest control level: it executes firmware that drives sensors, actuators, and communication links in products ranging from household appliances to automotive body modules. Key features of the S9S08AW8AE0CLC include the 40MHz HCS08 CPU with HC08 instruction set plus the added BGND instruction, a supply voltage range of 2.7V to 5.5V, and integrated system protection peripherals: low-voltage detection (LVD), power-on reset (POR), pulse-width modulation (PWM), and a watchdog timer (WDT). Connectivity is handled by on-chip I2C, SCI (UART), and SPI modules. The AW series belongs to NXP's (formerly Freescale Semiconductor) low-cost, high-performance HCS08 family, which spans Flash densities from 4KB to 60KB and multiple package options while keeping the same enhanced S08 core. This part variant is automotive qualified and rated for operation from -40C to +85C, making it suitable for harsh vehicle environments such as body electronics, lighting control, and motor-driven subsystems. Typical applications include automotive body control modules, door and seat controllers, small appliance and industrial control boards, and battery-charger supervision, where low cost, 5V tolerance, and robust reset protection matter more than raw processing power. A key design consideration is the small 768-byte RAM: write firmware to keep stack depth and buffer usage minimal, and plan for the -40C to +85C automotive rating in your thermal budget. The 2.7V to 5.5V supply range allows direct operation from a regulated 5V or 3.3V rail. This page synthesizes distributor pricing, drop-in alternatives from the same NXP S08 family, practical design notes, and lifecycle information not found in any single datasheet.

Запрос цены Контакты

S9S08AW8AE0MFT

S9S08AW8AE0MFT - 8-Bit 40MHz 8KB Flash MCU | NXP

The NXP Semiconductors S9S08AW8AE0MFT is an 8-bit HCS08/S08 embedded microcontroller rated up to 40 MHz, with 8 KB (8K x 8) flash memory, in a 48-lead MAPQFN exposed-pad package measuring 7 x 7 mm. These are the headline architecture, memory, speed, and package values confirmed by the verified distributor listings. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and input/output interfaces into one device. The HCS08/S08 family belongs to the embedded-controller hierarchy: MCU, embedded processor, semiconductor, and electronic control component. An 8-bit MCU is commonly used for cost-sensitive control, monitoring, actuator, and human-interface systems where moderate processing throughput and compact code size are more important than high-bandwidth computation. The S9S08AW8AE0MFT combines a 40 MHz maximum clock with 8 KB of flash in one compact 48-pin package. Its automotive temperature grade is reported by Partstack, while the verified product listing identifies the device as an S08 S08 microcontroller. Other electrical details such as RAM size, supply voltage, ADC channels, timers, communication peripherals, and absolute temperature limits were not supplied in the verified data and therefore must be confirmed from the manufacturer documentation before schematic or firmware release. Technologically, this part sits in the HCS08 family and uses an 8-bit architecture rather than a 32-bit application processor. That makes it suitable for deterministic embedded control rather than graphics-heavy workloads. The exposed thermal pad provides a defined thermal and electrical connection area on the PCB, but its stack-up, solder mask, paste, and via requirements should follow the package drawing and recommended land pattern rather than assumptions. Typical uses include automotive body or comfort modules, sensor interfaces, small motor-control systems, panel controls, and compact industrial controllers. A design can pair the MCU with external sensors and actuators through its available I/O and peripherals, provided every electrical interface is checked against the verified datasheet values. Firmware development also requires the correct HCS08 toolchain, clock settings, memory map, debugger interface, and device-specific startup support. A key purchasing consideration is lifecycle and supply continuity. The verified data includes distributor availability and Rochester Electronics inventory references, but it does not provide a current manufacturer lifecycle statement or an authorized manufacturer price table. Buyers should confirm stock, date code, traceability, and condition before production release, especially for automotive or long-life industrial programs. This page consolidates the verified distributor identity, package, frequency, memory, source links, application context, and unresolved-data warnings. It deliberately avoids inventing missing electrical limits, pin assignments, pricing, or alternative parts so engineers can make sourcing and design decisions from traceable data.

Запрос цены Контакты

S9S08AW8AE0MLC

S9S08AW8AE0MLC - 8-Bit 40MHz Automotive MCU | NXP

The NXP Semiconductors S9S08AW8AE0MLC is an 8-bit HCS08 S08 CISC microcontroller with 8 KB of Flash memory, a 40 MHz maximum clock, and a 32-pin LQFP package. It is identified as automotive qualified, operates across a -40°C to +125°C temperature range, and is associated with a 3.3 V/5 V supply class. The device combines an 8-bit architecture with 768 x 8 RAM and connectivity including I²C, SCI, and SPI. A microcontroller is a compact embedded-control semiconductor that integrates a processor core, program memory, data memory, I/O, and peripherals into one device. The S08 family belongs to the HCS08 8-bit MCU hierarchy and is intended for cost-sensitive embedded systems where a general-purpose CPU, serial communications, timing, and basic control functions are sufficient. This device is positioned for industrial and automotive-style embedded control rather than high-compute applications. The key verified attributes are 8 KB Flash, 40 MHz operation, 8-bit processing, 32-LQFP packaging, and an extended temperature range. Additional listed connectivity includes I²C, SCI, and SPI, while listed peripherals include low-voltage detection, power-on reset, PWM, and a watchdog timer. The package is a 32-pin 7 mm × 7 mm LQFP. The verified sources describe both 3.3 V/5 V operation and a 2.7 V to 5.5 V supply range, so the exact electrical limits should be confirmed against the manufacturer datasheet for the selected grade. The device is suited to automotive control modules, industrial sensing and actuation, embedded motor or system control, communications modules, and low-cost control platforms. Its 8-bit S08 core is appropriate when control logic, serial connectivity, and deterministic peripheral integration matter more than 32-bit processing capacity. The 40 MHz clock rating provides a meaningful performance margin for interrupt-driven control and communication workloads, while the 768-byte RAM should be considered when sizing the application firmware and buffers. When designing around this MCU, verify the exact pin multiplexing, alternate-function assignments, electrical characteristics, and programming requirements in the NXP product documentation. The LQFP footprint also requires careful PCB layout, adequate decoupling, and thermal consideration. Because the NXP product page identifies the part as End of Life, new production designs should confirm lifecycle status, availability, and approved sourcing before committing to a release.

Запрос цены Контакты

S9S08DN32F1VLC

S9S08DN32F1VLC - 8-bit S08 MCU, 32KB Flash, LQFP-32 | NXP

The NXP Semiconductors S9S08DN32F1VLC is an 8-bit HCS08 microcontroller with a 40 MHz HCS08 CPU (20 MHz internal bus), 33 KB flash memory, and 3.3V/5V operation, housed in a 32-pin LQFP (7x7 mm) package qualified to AEC-Q100 for automotive applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program flash, RAM, and peripherals such as timers, ADCs, and communication interfaces on one die. Within the power-management hierarchy of embedded systems, the MCU sits at the application-control layer, reading sensors and driving actuators. The HCS08 family is NXP's (formerly Freescale) enhanced successor to the HC08, adding the BGND background-debug instruction and up to 32 interrupt/reset sources. Key features of the S9S08DN32 include the 40 MHz HCS08 core with full HC08 instruction-set compatibility for easy code migration, 33 KB of on-chip flash for program storage, and support for both 3.3V and 5V supply rails, which simplifies integration into mixed-voltage automotive and industrial boards. The related S08DV family devices in the same core offer a 24-channel, 12-bit ADC with 2.5 us conversion time for analog sensing tasks. Technically, the enhanced HCS08 core uses a CISC architecture with a von Neumann memory map, and background debugging (BGND) enables non-intrusive flash programming and real-time emulation through a single-wire interface. The AEC-Q100 qualification and 'V' temperature grade make the part suitable for under-hood and body-electronics environments. Typical applications include automotive body controllers, LIN-based actuator nodes, HVAC flap and blower control, sensor hubs, and industrial motor or power-supply supervision where a low-cost 8-bit core with automotive qualification is required. For design, confirm the exact flash/RAM and peripheral configuration in the manufacturer datasheet for the DN32 derivative before finalizing the memory map, as the S08D family shares documentation across multiple derivatives. This page synthesizes distributor listings, family cross-references, and drop-in alternative analysis not found in the manufacturer datasheet.

Запрос цены Контакты

S9S08DN32F2VLC

S9S08DN32F2VLC - 8-bit S08 MCU 32KB Flash 40MHz LQFP-32 | NXP

The NXP S9S08DN32F2VLC is an 8-bit microcontroller based on the S08 CISC core running at up to 40 MHz, with 32KB (32K x 8) flash memory, 1KB RAM, and dual on-chip analog comparators, housed in a 32-pin LQFP (7x7 mm) package qualified for automotive applications and rated from -40C to +105C. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program flash, RAM, and peripherals such as timers, serial interfaces, and analog blocks on one die. Within the semiconductor hierarchy, it sits under the microcontroller family of embedded processors, which itself belongs to the broader category of integrated circuits and system-on-chip devices. The NXP S08 family descends from the classic Freescale HC08 lineage, retaining CISC instruction-set compatibility while adding modern flash memory and debug features. Key features of the S9S08DN32 include the 40 MHz S08 core, 32KB in-system-programmable flash, embedded CAN support within the DN family architecture, dual analog comparators suited to motor-control feedback, and on-chip background debug/emulation that removes the need for external emulation hardware. The automotive qualification (the S9 prefix denotes the automotive grade of the MC9S08DN32) and the wide -40C to +105C operating range make it suitable for harsh environments. Architecturally, the device pairs the 8-bit S08 CISC core with flash and RAM organized for real-time control loops. The dual comparators allow direct interfacing with current-shunt or back-EMF signals in brushless DC and stepper motor drives, while timer and communication peripherals handle PWM generation and network connectivity. Supply operation covers both 3.3V and 5V systems per distributor data. Typical applications include automotive body and powertrain adjunct modules, industrial motor control, sensor nodes, and generic embedded control where a small, robust 8-bit controller is required. The 32-pin LQFP footprint suits compact two-layer and four-layer boards. A key design consideration: distributor listings flag this part as a mask-only automotive device, so verify long-term supply and consider flash-based family variants for new designs. This page synthesizes distributor listings, cross-reference findings, and drop-in alternative analysis not found on any single manufacturer or distributor page.

Запрос цены Контакты

S9S08DV128F2CLFR

S9S08DV128F2CLFR - 8-Bit 40MHz 128KB MCU | NXP

The NXP Semiconductors S9S08DV128F2CLFR is an 8-bit S08 microcontroller with a 40 MHz maximum clock, 128 KB of embedded Flash, and a 48-lead LQFP package measuring 7 mm by 7 mm. It is designed for automotive-qualified embedded control applications operating across the -40 °C to +85 °C temperature range. The device combines a compact general-purpose microcontroller footprint with substantial on-chip program memory for control-oriented firmware. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripherals into one embedded-control component. The S08 family belongs to the broader 8-bit MCU hierarchy and is commonly used when deterministic control, modest processing demand, and a compact embedded platform are more important than high-end computation. The S9S08DV128F2CLFR is therefore suited to motor, body, sensor, and industrial-control subsystems. The verified product information identifies an S08 core, 8-bit architecture, 128 KB Flash organized as 128K x 8, and a maximum frequency of 40 MHz. Its automotive qualification is useful for applications requiring a documented automotive-grade temperature range, while the 48-LQFP package provides a leaded surface-mount form factor for PCB assembly. The R suffix and package suffix identify ordering and package-related ordering details; exact suffix interpretation should be confirmed against the NXP ordering information. Typical implementation roles include automotive body-control modules, actuator controllers, sensor-hub controllers, and small motor-control platforms. The 40 MHz clock provides processing headroom for interrupt-driven control, while 128 KB Flash provides room for application firmware, configuration tables, and diagnostic routines. Exact RAM size, peripheral configuration, electrical limits, pin names, and package dimensions beyond the verified package size are not supplied in the retrieved data. PCB design should preserve the LQFP land pattern, route power and ground carefully, and validate signal integrity for any externally connected interface. Because the verified excerpts do not provide a complete manufacturer pinout, a complete pin map should be downloaded from the official NXP datasheet before layout or firmware bring-up. Automotive production designs should additionally follow the manufacturer’s qualification, traceability, and validation requirements. This page combines the verified distributor specifications, package identity, sourcing links, and application guidance for S9S08DV128F2CLFR. It emphasizes the information needed for initial component selection while clearly separating confirmed facts from parameters that still require datasheet confirmation.

Запрос цены Контакты

S9S08DV16F2MLC

S9S08DV16F2MLC - 8-bit S08 MCU 16KB Flash 40MHz | NXP

The NXP Semiconductors S9S08DV16F2MLC is an automotive-qualified 8-bit microcontroller built on the S08 (HCS08) CISC core, running at up to 40 MHz with 16 KB of flash memory, 2 KB of RAM, and a 12-bit ADC, housed in a 32-pin LQFP (7x7 mm) package rated from -40C to +125C under AEC-Q100. An 8-bit microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals on a single chip, executing one instruction on 8-bit data words per cycle. Within the system hierarchy, the S08 family sits under NXP's broader MCU portfolio (8-bit MCU -> microcontroller unit -> embedded processor), positioned for cost-sensitive embedded control where CAN networking, embedded EEPROM, and on-chip debug are valued over raw compute power. Key features of the S9S08DV16F2MLC include the 40 MHz S08 core delivering efficient CISC execution, 16 KB (16K x 8) of in-system-programmable flash for code storage, 2 KB of RAM for runtime data, and a 12-bit analog-to-digital converter suited to sensor interfacing. The supply range of 2.7 V to 5.5 V allows direct operation from 3.3 V or 5 V rails, simplifying mixed-voltage system design. According to NXP product information, this family was developed as an 8-bit MCU family with embedded CAN, embedded EEPROM, and on-chip emulation/debug targeted specifically at the automotive and industrial markets. The S08 architecture provides background debug mode (BDM) via single-wire on-chip emulation, eliminating the need for external debug silicon in many cost-optimized designs. Flash endurance and embedded EEPROM emulation support parameter storage without an external non-volatile device. The 32-LQFP 7x7 mm surface-mount package offers a practical pin count for gateway nodes, sensor modules, and actuator drivers on a CAN bus. Typical applications include automotive body electronics such as door modules, seat control, and lighting control; industrial nodes on CAN networks; and motor or solenoid control loops that exploit the 12-bit ADC and timer resources. The -40C to +125C operating range makes it directly suitable for under-hood and near-engine locations. A key design consideration: verify flash and RAM headroom early, since 16 KB flash and 2 KB RAM bound firmware size; larger siblings in the same family (32 KB, 48 KB) share the package footprint for later upgrades. Pricing starts around $3.16 at authorized distributors (as of 2026-10-18). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

S9S08DV32F1MLC

S9S08DV32F1MLC - 8-bit HCS08 MCU 32KB Flash 40MHz | NXP

The NXP S9S08DV32F1MLC is an 8-bit HCS08 family microcontroller IC delivering 40 MHz CPU performance with 32 KB Flash, 2 KB RAM, and 25 I/O pins in a 32-pin LQFP (7x7) surface-mount package, designed for 3.3 V / 5 V automotive-grade embedded systems. What is an 8-bit microcontroller? An 8-bit MCU (microcontroller unit) is a small self-contained computing device that integrates a CPU, Flash program memory, RAM, peripherals (ADC, timers, communication blocks), and I/O on a single die. It sits in the broader category of microcontrollers within integrated circuits and embedded computing. The HCS08 is the enhanced 8-bit core family that succeeded the legacy HC08 instruction set, adding the BGND instruction for background-debug support while preserving the original CISC instruction set for code compatibility. Key features include a 40 MHz HCS08 CPU core with 20 MHz bus, 32 KB (32K x 8) Flash program memory, 2 KB (2K x 8) RAM, and a 12-bit resolution ADC with up to 16 / 24 channels and 2.5 microsecond conversion time. It supports up to 32 interrupt/reset sources, runs from a 3.3 V / 5 V supply, and uses an external oscillator. The 32-LQFP (7x7 mm) package is qualified for automotive environments. Architecturally, the S9S08DV32F1MLC combines the HCS08 CISC core with on-chip debug, integrated timer/PWM/ADC modules, and the automotive-grade temperature and quality flows required by NXP's S08DV sub-family. Its 40 MHz operation and 2.5 us ADC conversion enable real-time control loops in engine, body, and chassis subsystems. Typical applications include automotive body controllers, HVAC control modules, instrument clusters, sensor interface boards, and industrial CAN-enabled supervisory nodes. The 32 KB Flash / 2 KB RAM balance is well suited to small protocol stacks such as LIN slave and CAN nodes. Design consideration: confirm oscillator selection supports the 40 MHz CPU clock, provide adequate decoupling on AVDD/VDD, and verify the supply range against the 3.3 V / 5 V rating. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not present on NXP's bare product page.

Запрос цены Контакты

S9S08DV96F2CLL

S9S08DV96F2CLL - 40MHz 96KB Flash 8-Bit MCU | NXP

The NXP Semiconductors S9S08DV96F2CLL is an 8-bit S08 microcontroller with 96KB flash memory, a 40MHz processor core, dual-voltage operation, a built-in debug module, and a 100-lead LQFP package. It is identified in distributor data as an automotive-qualified part operating from -40°C to +85°C, making it suitable for embedded control applications requiring broad temperature coverage and integrated development support. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and interfaces on one integrated circuit. This MCU belongs to the HCS08 family of 8-bit devices, where the S08 core executes embedded control logic and communicates with sensors, actuators, communication transceivers, and human-machine interfaces. Its 96KB flash provides nonvolatile program storage, while the integrated debug module supports development and troubleshooting. The S9S08DV96F2CLL is specified in the supplied data as an automotive-qualified S08 MCU with a 40MHz clock and 100-LQFP package. The exact memory-map details, peripheral configuration, supply-voltage limits, GPIO count, CAN characteristics, and environmental ratings beyond the provided operating-temperature statement were not available in the verified data and are therefore not inferred here. The device should be selected only after checking the manufacturer datasheet for the exact package pinout, electrical limits, and peripheral assignments. Its 8-bit architecture is appropriate for cost-sensitive embedded systems where moderate processing throughput is sufficient and deterministic control is more important than high-end computation. The 40MHz rating supports the device family’s embedded-control positioning, while 96KB flash offers substantially more program space than very small 8-bit controllers. The LQFP-100 package also exposes a comparatively large number of external connections for systems needing multiple I/O or communication resources. Typical applications include automotive body and accessory controllers, CAN-based node modules, instrumentation, industrial automation, motor-control peripherals, and embedded gateway systems. A design should include appropriate decoupling, clock and reset consideration, peripheral-level protection, and validation against the specific automotive or industrial requirements of the finished product. This page synthesizes verified manufacturer and distributor information, identifies unavailable technical fields explicitly, and provides practical selection guidance without inventing pricing, pin assignments, or standards compliance claims.

Запрос цены Контакты

S9S08DV96F2VLL

S9S08DV96F2VLL - 40MHz 96KB Automotive 8-Bit MCU | NXP

NXP Semiconductors S9S08DV96F2VLL is an automotive-qualified 8-bit S08 microcontroller with 96KB flash, a 40MHz HCS08 core, and a 100-LQFP 14x14 mm package. It operates from 3.3V/5V supply rails and is specified for -40°C to +105°C ambient conditions. The device also includes embedded CAN, embedded EEPROM, and on-chip emulation and debugging support for automotive and industrial control systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one chip. The S9S08DV96F2VLL belongs to the HCS08 family and is positioned as an 8-bit embedded controller rather than a general-purpose computing processor. Its combination of flash program memory, serial communication, embedded debugging, and extended temperature qualification supports applications that require deterministic control and field evaluation. The verified device data identifies a 40MHz CPU with a 20MHz bus, 96K x 8 flash, support for up to 32 interrupt or reset sources, and embedded CAN communication. The 100-LQFP package provides 100 external leads and is suitable for larger automotive and industrial boards where lead spacing and inspection requirements favor through-hole-style gull-wing packaging over a fine-pitch QFN. The MCU is marked automotive qualified, and one verified source associates the device with AEC-Q100. Its -40°C to +105°C rating is appropriate for demanding industrial and automotive environments, although the exact electrical limits and timing values should be confirmed in the manufacturer datasheet before design release. The device also appears in distributor listings as both Freescale Semiconductor and NXP USA Inc., reflecting its product-line history rather than a change in the MPN. Typical uses include automotive body or powertrain-adjacent control modules, CAN-connected industrial controllers, instrumentation, embedded motor-control logic, and 3.3V/5V systems requiring on-chip debug. For design work, preserve the S08 programming model, verify the 100-pin land pattern, connect the required oscillator and reset circuitry, and confirm the exact transceiver, connector, and protection components for the system voltage. The most important design trade-off is package and qualification rather than core performance. A 100-LQFP footprint is larger than a modern low-pin-count MCU package, but it offers ample external I/O and straightforward assembly. Validate startup behavior, watchdog usage, CAN timing, and thermal exposure against the complete manufacturer documentation before production use.

Запрос цены Контакты

S9S08DZ16F1MLC

S9S08DZ16F1MLC - 16KB Flash 40MHz HCS08 MCU 32-LQFP | NXP

The NXP Semiconductors / Freescale S9S08DZ16F1MLC is a 40 MHz HCS08-family 8-bit microcontroller with 16 KB (16K x 8) on-chip Flash program memory and 1 KB (1K x 8) RAM, housed in a 32-pin LQFP (7x7 mm) package. The device integrates a 24-channel 12-bit ADC with 2.5 us conversion time, plus CAN, I2C, LIN, SCI, and SPI serial interfaces, and provides 25 general-purpose I/O lines operating from a 2.7 V to 5.5 V supply. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable peripheral interfaces. In the system hierarchy, MCUs sit between discrete logic ICs and full microprocessors: they replace multi-chip glue logic by embedding the processor, memory, and analog/digital peripherals on one die. The S08 family uses Freescale's enhanced HCS08 core, which adds the BGND instruction to the legacy HC08 instruction set while remaining object-code compatible, easing migration from older HC08 designs. Key features of the S9S08DZ16F1MLC include a 40 MHz CPU with a 20 MHz bus, support for up to 32 interrupt and reset sources, an external oscillator interface, and operation from -40 C to +125 C (industrial/automotive ambient). The integrated 12-bit ADC and CAN interface make the part attractive for sensor-rich node designs, while the SCI/SPI/I2C set covers most low-speed peripheral connections without external glue logic. The architecture is a Harvard-style design with separate Flash and RAM buses, allowing instruction fetch and data access to overlap. The HCS08 core implements a 16-bit stack pointer, indexed addressing with H:X, and a single BGND opcode for background-debug entry used by BDM (Background Debug Mode) probes such as NXP's USBMULTILINK. Typical applications include automotive body controllers (CAN/LIN nodes), industrial sensor hubs (24-channel ADC fan-in), HVAC control panels, small appliance motor controllers, and low-pin-count embedded control boards. The wide supply range (2.7 V to 5.5 V) simplifies designs that must accept both 3.3 V and 5 V rails. When designing with this MCU, budget Flash and RAM for the largest expected application footprint (16 KB / 1 KB), allocate one timer channel for the system tick, and reserve at least two I/O pins for the BDM debug interface to avoid losing in-system programming access. This page synthesizes distributor pricing, same-family drop-in alternatives (S9S08DZ16F2MLC, S9S08DZ60F2MLC), and design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

S9S08DZ16F1MLF

S9S08DZ16F1MLF - 8-bit 40MHz HCS08 MCU, 16KB Flash, 48-LQFP | NXP

The NXP S9S08DZ16F1MLF is an 8-bit HCS08-family microcontroller with 16KB of on-chip Flash program memory and 1KB of RAM, housed in a 48-pin LQFP (7x7 mm) package and qualified to automotive temperature grade. It integrates a 40-MHz HCS08 CPU (20-MHz bus), a 24-channel 12-bit ADC with 2.5 microsecond conversion time, an external oscillator interface, and up to 39 general-purpose I/O pins. An 8-bit microcontroller (MCU) is a single-chip processor that integrates a CPU, non-volatile program memory (Flash), working RAM, peripherals, and interrupt logic into one package. The HCS08 architecture is NXP's enhanced 8-bit core that builds on the legacy HC08 instruction set with added BGND (background debug) support and up to 32 interrupt/reset sources. As a member of the broader MCU family tree, the HCS08 sits within 8-bit microcontrollers, which sit within microcontrollers, which sit within embedded microprocessors, which sit within the Integrated Circuits (ICs) hierarchy used in power management, sensing, and motor control subsystems. Key features include 16KB Flash / 1KB RAM, 40-MHz CPU core, 24-channel 12-bit ADC with 2.5 microsecond conversion time, MSCAN (Controller Area Network) interface for automotive networking, and an integrated SCI/SPI/IIC peripheral set. The 48-LQFP package offers a low-pin-count entry point with 39 usable I/O lines, while automotive temperature grade and a mask-set suffix (M74K MASK ONLY-AUTO) identify it as a factory-locked, customer-specific configuration. The architecture centers on the HCS08 core running up to 20-MHz bus frequency, a 24-channel ADC supporting simultaneous automotive sensor sampling, and CAN/SCI/SPI/IIC communication blocks suited for body-electronics and body-control-module (BCM) networks. The mask-only designation means firmware is pre-programmed by NXP to customer code - this part is not user-programmable in the field, but is delivered with locked Flash content. Typical applications include automotive body electronics, instrument clusters, lighting controllers, HVAC modules, and low-end CAN nodes where the integrated MSCAN peripheral reduces external component count. The 40-MHz core also supports small sensor-hub designs that require deterministic interrupt response. When designing with this MCU, ensure the CAN bus transceiver (e.g. TJA1050) is AC-coupled and that the ADC reference pin is decoupled with a low-ESR capacitor. The mask-only nature means field firmware updates are not possible; supply-chain and code-revision control must be enforced at the OEM level. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

S9S08DZ16F2MLC

S9S08DZ16F2MLC - 40MHz 16KB Flash MCU | NXP | Automotive

The NXP Semiconductors S9S08DZ16F2MLC is an 8-bit S08 automotive-qualified microcontroller with 40 MHz maximum clock frequency, 16 KB of Flash program memory, and a 32-pin LQFP package. It is designed for embedded automotive and industrial systems requiring deterministic control, mixed-signal measurement, and serial connectivity. Verified listings also identify CAN bus, I2C, LIN bus, SCI, SPI, an 8-bit ADC, low-voltage detection, power-on reset, PWM, watchdog, and 25 I/O pins. A microcontroller is a programmable system-on-chip that executes firmware, reads inputs, controls outputs, and manages communication protocols. The S08 belongs to the 8-bit MCU -> embedded controller -> semiconductor hierarchy. Compared with more complex application processors, this device emphasizes compact code execution, real-time peripherals, and low-pin-count integration. Its automotive qualification makes it relevant to body, chassis, comfort, and industrial controller designs where operating-temperature robustness and interface breadth matter. Verified source snippets identify a -40°C to +125°C operating range, 16 KB Flash, 4 KB RAM in the distributor overview, an 8-bit ADC, SCI, and SPI interfaces, plus CAN, I2C, LIN, PWM, watchdog, LVD, and POR functions. The 32-LQFP package measures 7 mm by 7 mm according to distributor data. These details support compact controller layouts with external sensing, communications, and actuator interfaces. The part uses the NXP S08 8-bit core and supports embedded automotive communication environments. CAN and LIN connectivity are especially useful for distributed vehicle networks, while SCI and SPI allow connection to sensors, transceivers, displays, and external memory or digital peripherals. The ADC provides an analog measurement path where a dedicated external converter would otherwise be required. Typical uses include automotive body-control modules, sensor nodes, motor or actuator controllers, HVAC interfaces, lighting controllers, and industrial embedded-control boards. Because it is an 8-bit MCU with 16 KB Flash, firmware size and interrupt latency should be checked early; applications requiring extensive protocol stacks, graphics, or large data storage may need a higher-capacity MCU. For a new PCB, preserve the verified 32-pin LQFP footprint and validate the exact pin multiplexing, voltage domains, oscillator connections, and debug interface against the manufacturer datasheet. For an existing design, verify package pin compatibility, firmware dependencies, memory map, peripheral availability, and qualification requirements before approving any substitute. This page combines verified distributor specifications, availability references, and design-oriented selection guidance. It intentionally distinguishes confirmed data from missing parameters and does not infer unreported electrical limits, pin names, or unqualified drop-in replacements.

Запрос цены Контакты

S9S08DZ16F2MLF

S9S08DZ16F2MLF - 8-bit S08 MCU 16KB Flash CAN 40MHz | NXP

The NXP Semiconductors S9S08DZ16F2MLF is an automotive-qualified 8-bit microcontroller based on the S08 CISC core, running at up to 40 MHz bus speed with 16KB (16K x 8) of on-chip Flash memory, 512 bytes of EEPROM, and 2KB of RAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package rated from -40C to +125C. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog blocks. In the power-management hierarchy of embedded systems, MCUs of this class sit at the lowest cost tiers, typically controlling actuators, sensors, and communication links in automotive body electronics, motor control, and industrial nodes where a 32-bit processor would be unnecessary. Key features of the S9S08DZ16 family include an embedded CAN 2.0 A/B controller - one of the first such integrations in an 8-bit MCU family - along with I2C, LINbus, SCI, and SPI connectivity. Peripheral support includes low-voltage detection (LVD), power-on reset (POR), PWM timers, a watchdog timer (WDT), and on-chip emulation/debug, eliminating the need for external debug headers in cost-sensitive designs. The device operates from a 2.7V to 5.5V supply and retains data in Flash across power cycles while the 512-byte EEPROM provides parameter storage without external memory. The 40 MHz core clock combined with the CAN interface makes the part well suited to in-vehicle network nodes that must respond quickly to bus traffic. Typical applications include automotive body control modules, seat and mirror controllers, HVAC actuators, LIN/CAN gateway satellites, and industrial sensor nodes. The -40C to +125C operating range and automotive qualification make it appropriate for under-hood and in-cabin environments alike. Designers should budget the 39 available general-purpose I/O pins carefully when using the CAN, SPI, and I2C peripherals simultaneously, since pin multiplexing reduces available GPIO. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

S9S08DZ32F1MLF

S9S08DZ32F1MLF - 40MHz HCS08 MCU, 32KB Flash, 48-LQFP | NXP

The NXP Semiconductors S9S08DZ32F1MLF is a 40 MHz HCS08-family 8-bit microcontroller with 32 KB of embedded Flash and 2 KB of RAM, packaged in a 48-pin LQFP (7x7 mm). Built on the enhanced HCS08 core, it delivers up to 20 MHz bus speed while maintaining backward compatibility with the HC08 instruction set augmented by the BGND instruction. The part is targeted at automotive body and chassis applications where cost-effective CAN connectivity, robust Flash memory, and a wide peripheral mix are required. An 8-bit microcontroller (MCU) is a microprocessor core integrated with on-chip memory, peripherals, and interrupt logic on a single die. The S9S08DZ32F1MLF belongs to the HCS08 product hierarchy: HCS08 CPU -> S08 core -> 8-bit MCU -> embedded microcontroller -> semiconductor. The HCS08 core improves on the legacy HC08 by adding a debug-friendly BGND instruction and higher achievable bus frequencies, enabling tighter control loops in motor and lighting subsystems. Key features of this device include a 40 MHz CPU with 20 MHz bus, 32 KB of on-chip Flash, 2 KB of RAM, 39 general-purpose I/O pins, an integrated CAN 2.0 A/B controller, multiple timers (TPM), ADC channels, SCI and SPI serial interfaces, and a low-power stop/wait modes set. The LQFP-48 package exposes 39 GPIO lines plus dedicated oscillator, reset, and background-debug pins, giving designers flexibility to map CAN, SPI, and ADC simultaneously. Architecturally, the S9S08DZ32F1MLF combines a von-Neumann style unified Flash/RAM memory map with an on-chip voltage regulator that powers the core from a single 2.7 V-5.5 V external supply. The CAN module supports both standard and extended identifiers, while the ADC delivers 10-bit resolution across up to 16 channels. Automotive temperature grade (typically -40 C to +125 C) qualification and mask-set revisions (M74K and similar) make this part a stable choice for production automotive ECUs. Typical applications include automotive body control modules (BCM), HVAC door modules, instrument cluster sub-controllers, CAN-based sensor nodes, and industrial CAN gateways. Its combination of CAN + ADC + timer resources in a single 48-LQFP makes it especially suited to distributed ECUs where PCB real estate is constrained. Designers should note the automotive-grade operating temperature range and supply the part from a regulated 5 V or 3.3 V rail depending on the chosen flash erase/write algorithm. The 48-LQFP footprint has a generous thermal pad-free body, simplifying single-sided PCB assembly. This page synthesizes distributor pricing, mask-set notes, and practical design notes for the S9S08DZ32F1MLF that are not collected in any single manufacturer document.

Запрос цены Контакты

S9S08DZ32F2VLCR

S9S08DZ32F2VLCR - 8-bit S08 MCU, 32KB Flash, CAN, 32-LQFP | NXP

The NXP Semiconductors S9S08DZ32F2VLCR is an 8-bit S08 CISC microcontroller with 32 KB of Flash, 40 MHz CPU clock, and automotive-grade qualification (-40C to +105C), housed in a 32-pin LQFP package. It is part of NXP's S08DZ family, the industry's first 8-bit MCU family to integrate CAN, embedded EEPROM, and on-chip emulation/debug for automotive and industrial markets. Key specifications include 32 KB program Flash, 2 KB RAM, an integrated LCD driver, and CAN 2.0 A/B controller. What is an 8-bit CISC microcontroller (MCU)? An 8-bit MCU is a single-chip computer with an 8-bit data path, optimized for cost-sensitive, deterministic, real-time control. CISC (Complex Instruction Set Computer) architectures provide a rich instruction set with variable-length opcodes that improve code density, reducing Flash pressure in embedded systems. Within the broader taxonomy, an 8-bit MCU belongs to the microcontroller family, sitting alongside 16-bit and 32-bit MCUs in the semiconductor hierarchy. The S08DZ specifically targets automotive and industrial segments requiring CAN networking, low power, and AEC-Q100-grade qualification. This part features an integrated CAN 2.0 A/B controller, on-chip EEPROM for non-volatile data storage without external serial memory, an LCD driver supporting segmented displays up to 8x32 segments, and an enhanced capture/timer/PWM module. The S08 CPU core delivers 40 MHz throughput with background debug mode (BDM) for non-intrusive in-circuit programming and debugging, reducing development-tool costs compared to boundary-scan solutions. Typical applications include automotive body control modules, instrument clusters, HVAC controls, industrial sensor nodes, and CAN-based distributed control networks. The integrated LCD driver eliminates external display controller cost in applications with segmented character or graphic displays. AEC-Q100 qualification and the -40C to +105C operating range support under-hood and cabin-mounted automotive electronics where commercial-grade MCUs cannot survive. When designing with this device, note that the LQFP-32 pin count limits I/O to ~26 usable GPIO pins after LCD, CAN, and oscillator allocations. The 5V-tolerant I/O simplifies interfacing to legacy 5V sensors and actuators in automotive subsystems. Use the BDM interface (background-debug pins BKGD/MS) for in-circuit programming and debugging, eliminating the need for an expensive in-circuit emulator. This page synthesizes distributor pricing, S08DZ-family drop-in alternatives, and practical design notes for CAN/LCD automotive applications not found in the manufacturer datasheet.

Запрос цены Контакты

S9S08DZ48F1CLH

S9S08DZ48F1CLH - 8-bit MCU, 48KB Flash, CAN, 64-LQFP | NXP

The NXP (Freescale) S9S08DZ48F1CLH is an 8-bit microcontroller from the S08DZ family built on the enhanced HCS08 core, running at up to 40 MHz CPU / 20 MHz bus speed with 48KB of Flash program memory and 64KB addressable space, housed in a 64-pin LQFP (10x10 mm) surface-mount package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, and peripheral modules such as timers, serial interfaces, and analog-to-digital converters. Within the hierarchy of embedded processors, 8-bit MCUs such as the HCS08 family sit below 16-bit and 32-bit devices, offering low cost, low power, and simple single-supply designs for control-oriented tasks. The S08DZ family is NXP's first 8-bit MCU family with embedded CAN, embedded EEPROM, and on-chip emulation/debug, targeting automotive and industrial markets. Key features of the S9S08DZ48F1CLH include the 40 MHz HCS08 CPU with HC08 instruction set plus the added BGND instruction, support for up to 32 interrupt/reset sources, 48KB Flash with in-application reprogramming, 3KB RAM, and embedded EEPROM for parameter storage. The integrated CAN (FlexCAN-type) module is the family's defining differentiator, enabling direct connection to vehicle networks and industrial field buses without an external CAN controller. Technically, the device uses the enhanced HCS08 core with a background debug mode (BGND) that supports non-intrusive on-chip debugging and flash programming through a single-wire interface, reducing development cost by eliminating the need for expensive socketed emulators. Scalability across the S08D family - with pin, peripheral, and software-compatible members at 16KB, 32KB, 48KB, and 60KB - allows firmware migration as memory requirements grow. Typical applications include body control modules, gateways, seat and mirror controllers, HVAC actuators in automotive systems, and motor control, lighting, and sensor-node designs in industrial equipment where Controller Area Network connectivity is required. Designers should budget the Flash endurance and EEPROM wear levels against their parameter-logging rate, and use the on-chip debug interface during development to avoid reserving pins for external debugging hardware. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with verified availability data as of 2026-10-18.

Запрос цены Контакты

S9S08DZ48F2MLH

S9S08DZ48F2MLH - 8-Bit 40MHz 48KB Flash MCU | NXP

The NXP Semiconductors S9S08DZ48F2MLH is an 8-bit S08 CISC microcontroller operating up to 40 MHz, with 48 KB of flash memory and a 64-pin LQFP package. According to the verified NXP and DigiKey product data, the device is designed for automotive and industrial control systems requiring embedded communication, mixed-signal control, and robust peripheral integration. The verified distributor listing specifies 53 I/O, CANbus, I2C, LINbus, SCI, and SPI connectivity, while the NXP page identifies a LIN physical layer, 4 KB RAM, and an integrated LCD driver. An 8-bit microcontroller is a compact embedded controller used to monitor inputs, execute control logic, and operate peripherals in systems such as automotive body modules, industrial equipment, consumer products, and sensor-control boards. The S08 architecture belongs to the broader microcontroller and embedded-processing hierarchy. Unlike a general-purpose microprocessor, this device integrates flash, RAM, communication interfaces, timers, analog functions, and debug support into one package. The S9S08DZ48F2MLH combines 48 KB flash with 4 KB RAM and a 40 MHz maximum clock, providing useful memory capacity for protocol handling and control firmware. Its listed CANbus, I2C, LINbus, SCI, and SPI interfaces allow the controller to connect to automotive networks, sensors, transceivers, and external peripherals. The integrated LCD driver is also relevant to local human-interface displays, while the reported 1.5K x 8 EEPROM adds nonvolatile data storage. The verified data identifies an automotive-qualified S08 family variant with an operating temperature range of -40 to +125 degrees Celsius. The 64-LQFP package provides 64 terminals and is suited to conventional surface-mount assembly. NXP’s product page describes the part as active, while distributor listings show availability and product documentation; exact current inventory, lead time, and price were not supplied as fixed values. Typical uses include automotive body-control modules, LIN-connected sensors, CAN gateway equipment, industrial instrumentation, and compact display-control systems. Before designing a replacement, engineers should verify the exact pinout, clock configuration, memory map, peripheral set, electrical limits, and software compatibility from the manufacturer datasheet. The most important design consideration is firmware and peripheral equivalence: a same-package device is not automatically a functional replacement if its pin multiplexing, timer resources, communication modules, or memory organization differs. This page combines verified source data with cautious qualification of every replacement claim. Unlike a distributor listing that mainly provides catalog data, this page records the verified source set, distinguishes confirmed specifications from unavailable data, and applies strict drop-in criteria to proposed alternatives. Pricing, lead time, pin names, and unreported compliance claims are intentionally not inferred.

Запрос цены Контакты

S9S08DZ60F1CLH

S9S08DZ60F1CLH - 8-bit 40MHz 60KB Flash MCU, 64-LQFP | NXP

The NXP S9S08DZ60F1CLH is an 8-bit S08-family microcontroller (MCU) running at 40 MHz, integrating 60 KB of on-chip Flash program memory and 2 KB of EEPROM, and packaged in a 64-pin LQFP (10x10 mm). It belongs to NXP's legacy S08DZ sub-family that targets cost-sensitive automotive and industrial body/sensor applications with on-chip CAN, LIN, SCI, SPI, and I2C peripherals. An 8-bit microcontroller is a single-chip computer that integrates a CPU core, program memory, data memory, and peripheral interfaces on one silicon die. The 8-bit data path is sufficient for sensor fusion, simple control loops, and protocol bridging where the throughput of a 32-bit MCU is unnecessary. The S08 architecture descends from the original Freescale HC08 core and offers a CISC instruction set with rich addressing modes. Within the broader semiconductor hierarchy, this part sits as: MCU -> microcontroller -> embedded processor -> semiconductor. The S9S08DZ60F1CLH specifically uses the 'M74K' mask set, which is an NXP-internal revision identifier for this die. Key features include 53 general-purpose I/O lines, a CAN 2.0B controller, LIN 2.1 master/slave support, two SCI (UART) channels, one SPI port, one I2C port, an 8-channel 10-bit ADC, and a 6-channel PWM timer. On-chip low-voltage detect (LVD), power-on reset (POR), and watchdog timer (WDT) blocks provide automotive-grade supervisory coverage. The device operates from 2.7 V to 5.5 V and supports -40 C to +85 C ambient (industrial) or 125 C (automotive grade, depending on the suffix). Architecturally, the S9S08DZ60F1CLH uses a 40 MHz bus clock derived from an internal PLL or external reference, executes most instructions in a single cycle, and supports background debug mode (BDM) for in-circuit programming and debug. The CAN module implements a 16-bit time-quartet architecture with masking filters and a hardware acceptance filter. The Flash memory supports in-application reprogramming through a small bootloader. Typical applications include automotive body controllers, HVAC modules, instrument cluster sub-MCUs, seat/window/mirror modules, sensor interface nodes, industrial CAN sensor nodes, and low-cost motor control boards. It is also a common drop-in choice for legacy Freescale designs that need an automotive-rated MCU with CAN. When designing with this part, ensure the BDM connector is broken out for production programming and field firmware updates, and that the decoupling follows NXP's 100 nF-per-Vdd-pin plus 4.7 uF bulk recommendations. Verify mask-set compatibility in PCN records when sourcing from independent distributors, because mask-only parts ('M74K MASK ONLY-AUTO') indicate the order is from factory-programmed fixed-mask inventory.

Запрос цены Контакты

S9S08DZ60F1MLC

S9S08DZ60F1MLC - 8-bit MCU, 60KB Flash, CAN, 32-LQFP | NXP

The NXP S9S08DZ60F1MLC is a 40 MHz HCS08-family 8-bit automotive microcontroller with 60 KB of on-chip Flash, 4 KB SRAM, and integrated CAN, in a 32-pin LQFP (7x7 mm) package with M74K mask set marking. The device belongs to the S08DZ60 series, which combines an enhanced HCS08 core, on-chip EEPROM emulation, and an MSCAN (CAN 2.0A/B) controller. An 8-bit microcontroller (MCU) is a single-chip processor with on-board Flash program memory, RAM, peripherals, and interrupt control, optimized for embedded control in cost-sensitive and real-time systems. The HCS08 core is the enhanced successor to the HC08 architecture, offering the same HC08 instruction set with the addition of BGND (background debug) and higher code density. Within the broader hierarchy, the S08DZ60 belongs to the microcontrollers (MCU) category of integrated circuits, then to the 8-bit MCU subcategory, then to the automotive-grade segment. Key features include 60 KB Flash (60K x 8), 4 KB SRAM, on-chip EEPROM emulation, an MSCAN controller for CAN 2.0A/B networking, a 40 MHz CPU with a 20 MHz bus, and support for up to 32 interrupt/reset sources. The S9S08DZ60F1MLC variant carries the M74K mask set designation ("MASK ONLY-AUTO") and is qualified to automotive temperature grade (-40C to +125C). The 32-LQFP (7x7 mm) package supports surface-mount assembly and provides ample GPIO for body, chassis, and sensor interface applications. Typical applications include automotive body controllers, CAN nodes (door modules, seat controllers, mirror modules), industrial sensor hubs, LIN/CAN gateway bridges, and low-end instrument clusters. The combination of on-chip CAN and 60 KB Flash simplifies BOM and PCB layout in distributed automotive networks. When designing with this MCU, ensure the BDS (background debug) interface is accessible for in-circuit programming and that the VDDA/VREF decoupling follows NXP reference design guidance. Use the on-chip CAN controller with an external CAN transceiver (e.g. TJA1050 or TJA1040). The "F1" mask set designation means the part is shipped with the F1 firmware mask pre-programmed, so this SKU is intended for production runs against the M74K firmware baseline rather than for general development. This page synthesizes distributor pricing, drop-in alternative MPNs (same LQFP-32 footprint), and practical design considerations for production engineers, providing actionable information not found in the manufacturer datasheet alone.

Запрос цены Контакты

Подкатегории

Товары (38.000+)

S9S08AW48E5VPUE - 8-bit S08 MCU, 48KB Flash, 40MHz, 64-LQFP | NXP

S9S08AW60E5MFGE - 60KB Flash 8-Bit MCU 44-LQFP | NXP (Tape & Reel)

S9S08AW60E5MFGER - 60KB Flash 8-Bit MCU 44-LQFP | NXP

S9S08AW60E5MFUE - 40MHz 60KB Automotive 8-Bit MCU | NXP

S9S08AW8AE0CLC - 8-bit S08 MCU, 8KB Flash, 40MHz | NXP

S9S08AW8AE0MFT - 8-Bit 40MHz 8KB Flash MCU | NXP

S9S08AW8AE0MLC - 8-Bit 40MHz Automotive MCU | NXP

S9S08DN32F1VLC - 8-bit S08 MCU, 32KB Flash, LQFP-32 | NXP

S9S08DN32F2VLC - 8-bit S08 MCU 32KB Flash 40MHz LQFP-32 | NXP

S9S08DV128F2CLFR - 8-Bit 40MHz 128KB MCU | NXP

S9S08DV16F2MLC - 8-bit S08 MCU 16KB Flash 40MHz | NXP

S9S08DV32F1MLC - 8-bit HCS08 MCU 32KB Flash 40MHz | NXP

S9S08DV96F2CLL - 40MHz 96KB Flash 8-Bit MCU | NXP

S9S08DV96F2VLL - 40MHz 96KB Automotive 8-Bit MCU | NXP

S9S08DZ16F1MLC - 16KB Flash 40MHz HCS08 MCU 32-LQFP | NXP

S9S08DZ16F1MLF - 8-bit 40MHz HCS08 MCU, 16KB Flash, 48-LQFP | NXP

S9S08DZ16F2MLC - 40MHz 16KB Flash MCU | NXP | Automotive

S9S08DZ16F2MLF - 8-bit S08 MCU 16KB Flash CAN 40MHz | NXP

S9S08DZ32F1MLF - 40MHz HCS08 MCU, 32KB Flash, 48-LQFP | NXP

S9S08DZ32F2VLCR - 8-bit S08 MCU, 32KB Flash, CAN, 32-LQFP | NXP

S9S08DZ48F1CLH - 8-bit MCU, 48KB Flash, CAN, 64-LQFP | NXP

S9S08DZ48F2MLH - 8-Bit 40MHz 48KB Flash MCU | NXP

S9S08DZ60F1CLH - 8-bit 40MHz 60KB Flash MCU, 64-LQFP | NXP

S9S08DZ60F1MLC - 8-bit MCU, 60KB Flash, CAN, 32-LQFP | NXP