Товары (46.000+)

STM32L051C8T7 - 32MHz 64KB Cortex-M0+ MCU | STMicroelectronics
STM32L051C8T7

STM32L051C8T7 - 32MHz 64KB Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L051C8T7 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller operating at 32MHz, with 64KB of Flash memory and a 48-pin LQFP package measuring 7 x 7 mm. It belongs to the STM32 L0 access-line family, combining a compact RISC core with low-power operation for compact embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The STM32L0 series is positioned within the hierarchy of embedded microcontroller ICs and specifically targets low-power designs. This makes the STM32L051C8T7 suitable for systems that need responsive control and broad peripheral integration while operating from constrained energy budgets. Key characteristics include a 32MHz Arm Cortex-M0+ RISC core, 64KB of Flash, and 12-bit ADC support with an operating temperature range of -40°C to +105°C. The 48-LQFP package provides a conventional leaded surface-mount footprint suitable for designs assembled with standard PCB equipment. Its 32-bit architecture and peripheral integration allow one device to handle control logic, sensor acquisition, communications, and system supervision. The STM32L0 architecture is designed around an Arm Cortex-M0+ core, a compact instruction set intended for embedded control rather than high-performance computing. The 64KB Flash area provides room for application firmware, while integrated peripherals reduce the need for external components. Designers should consult the manufacturer product page and datasheet for complete clock, memory, GPIO, timer, communication, and electrical characteristics before finalizing a board. Typical uses include low-power sensor nodes, compact industrial controls, battery-powered monitoring equipment, building automation endpoints, and small accessory controllers. The MCU is also appropriate for wearable-adjacent and portable products where board area and energy efficiency are important. In each case, the device can consolidate basic control and sensing tasks while preserving a straightforward firmware-development path. The primary design consideration is package and firmware planning. Use the datasheet pin-description and package drawings when assigning board tracks, programming connections, decoupling, clock components, and reset circuitry. Confirm that the firmware image, peripheral configuration, startup code, and development toolchain are compatible with the exact STM32L051C8T7 configuration before production release. This product page combines the manufacturer specifications, distributor listing details, same-family replacement information, package-level selection guidance, and practical design considerations to support faster component evaluation. It helps engineers distinguish exact configuration changes from genuinely interchangeable options and identify when firmware or qualification review is required before substitution.

Запрос цены Контакты
STM32L051K6T6 - 32MHz 32KB Cortex-M0+ MCU | STMicroelectronics
STM32L051K6T6

STM32L051K6T6 - 32MHz 32KB Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L051K6T6 is an ultra-low-power, 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 32 KB (32K x 8) of Flash memory and 25 I/O pins in a 32-LQFP (7x7) package. It belongs to STMicroelectronics' access-line STM32L0 family and is designed for compact, energy-sensitive embedded-control products. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, peripherals, and input/output interfaces into one device. In the product hierarchy, the STM32L051K6T6 is an MCU, a general-purpose integrated circuit used to execute firmware and supervise connected hardware. Its Arm Cortex-M0+ core provides a compact, energy-efficient architecture for control-oriented rather than high-compute workloads. The verified device data identifies a 32-bit operating architecture, a maximum stated frequency of 32 MHz, 32 KB of Flash, and a 32-LQFP package. Distributor listings also identify a 12-bit ADC and 25 I/O pins. These resources make the device suitable for low-power sensing, actuator control, simple communications, and embedded products where a larger Cortex-M3 or Cortex-M4 processor would add unnecessary cost, board area, or energy consumption. The STM32L051K6T6's 32 MHz Cortex-M0+ core is positioned for energy-conscious control applications, while its 32 KB Flash capacity supports firmware, configuration data, and boot logic on one device. Its LQFP construction provides visible leads for inspection and repair, unlike fine-pitch land-grid-array packages. Exact RAM capacity, peripheral timing, and detailed electrical limits should be confirmed in the manufacturer datasheet for the final design. Typical uses include battery-powered environmental sensors, compact industrial monitoring nodes, access-control peripherals, low-power motor-control modules, and connected instrumentation. A designer can use the ADC for analog measurements and the GPIO structure for switches, indicators, sensors, and actuators, subject to the complete pin and peripheral assignments in the datasheet. The most important design consideration is to verify every alternate-function assignment and operating condition against the STM32L051K6T6 datasheet before PCB release. The 32-LQFP footprint should be checked for pin clearance, thermal exposure, and assembly capability, while firmware should use only the peripherals and interrupt assignments supported by the exact orderable device. This product record consolidates verified manufacturer and distributor information, current purchasing references, package details, application guidance, and same-family drop-in alternatives. It also identifies information that requires confirmation from the full datasheet rather than estimating unspecified RAM, timing, temperature, or pin-function values.

Запрос цены Контакты
STM32L051K6U6 - 32MHz Cortex-M0+ MCU | STMicroelectronics
STM32L051K6U6

STM32L051K6U6 - 32MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L051K6U6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M0+ processor operating at 32 MHz, 32 KB of Flash memory, and a 32-pin UFQFPN package measuring 5 x 5 mm. It is positioned for compact embedded systems requiring efficient control, communications, analog measurement, and low standby power. An ultra-low-power microcontroller is a semiconductor designed to complete control tasks while minimizing active and idle energy consumption. The STM32L0 family belongs to the 32-bit Arm Cortex-M microcontroller hierarchy and combines general-purpose processing, embedded memory, serial interfaces, timing peripherals, and analog conversion in one device. This integration reduces board area in battery-powered instruments, compact sensors, industrial controls, and accessory nodes. The STM32L051K6U6 provides 32 KB of Flash for firmware, 8 KB of SRAM for working memory, and 2 KB of EEPROM for nonvolatile data retention. Its feature set includes ADC capability, I2C, SPI, UART, and PWM functions. The Arm Cortex-M0+ core executes 32-bit instructions at up to 32 MHz, supporting responsive digital control while retaining the efficiency expected from an ultra-low-power embedded platform. The part is identified as a 32-UFQFPN surface-mount device in a 5 x 5 mm outline. Its compact land pattern is useful for space-constrained products, although the exposed-area thermal and assembly requirements must be followed in the PCB footprint and production process. The operating-temperature range listed for this ordering code extends from -40 C to 85 C, supporting industrial and commercial equipment where that range is adequate. Typical applications include low-power sensor nodes, compact industrial controllers, battery-operated instruments, communication modules, and small motor or actuator-control products. The UART and SPI interfaces support external radios and storage, I2C supports low-speed sensors and peripherals, and the ADC supports analog monitoring. Firmware can use these interfaces together with PWM outputs and low-power modes to balance responsiveness against average energy use. Designers should begin with the manufacturer pin-description table and package drawing before assigning tracks or defining the exposed-pad connection. Confirm the operating-voltage limits, decoupling requirements, clock configuration, programming interface, and unused-pin treatment in the manufacturer datasheet. Firmware migration to another STM32L0 member should be checked for peripheral differences even when the package and core are shared. This product page combines the exact ordering information, interface features, pin-package characteristics, practical application guidance, and same-family drop-in alternatives for STM32L051K6U6 evaluation. It is designed to shorten component selection while preserving the electrical, mechanical, and firmware checks required for a reliable embedded design.

Запрос цены Контакты
STM32L051K8T6 - 32MHz Arm Cortex-M0+ MCU | STMicroelectronics
STM32L051K8T6

STM32L051K8T6 - 32MHz Arm Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L051K8T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 64 KB of Flash memory and 8 KB of RAM in a 32-LQFP 7 x 7 mm package. It also provides 2 KB of data EEPROM, a 12-bit 10-channel ADC, and up to 27 GPIO for compact energy-sensitive embedded systems. An ultra-low-power microcontroller is an integrated computing device designed to perform control, measurement, and communications tasks while minimizing energy consumption between active processing periods. The STM32L051K8 belongs to the STM32L0 access-line hierarchy: microcontroller, embedded processor, Arm Cortex-M0+ MCU, and semiconductor. This positioning makes it suitable for small systems that need more processing capability than a simple logic device but value compactness, low power, and broad peripheral integration. Key features include 64 KB of Flash for firmware, 8 KB of SRAM for working data, and 2 KB of EEPROM for parameters that must retain their values without power. The device provides three general-purpose timers, one basic timer, one low-power timer, one SPI or I2S interface, one I2C interface, and two USART interfaces. Its 12-bit, 10-channel synchronized ADC supports embedded analog measurement, while as many as 27 GPIO allow direct connection of sensors, switches, displays, and actuators. The STM32L051K8T6 uses the high-performance 32 MHz Arm Cortex-M0+ core within the STM32L0 product family. Serial wire debug provides a compact programming and debugging connection, reducing the number of external pins and board area required during development. The part combines 32-bit processing, integrated analog conversion, timer-based control, and serial communications in one 32-LQFP package, reducing the component count of compact control boards. Typical applications include battery-powered sensor nodes, industrial condition-monitoring equipment, compact building-control modules, low-power data loggers, consumer accessories, and portable measurement instruments. Designers can use the ADC for analog inputs, timers for periodic sampling or PWM generation, and the I2C, SPI, and USART peripherals for sensors, memory, displays, or external communications modules. A key design consideration is power management. Engineers should use the device's low-power operating modes when the application spends substantial time idle, while confirming the required supply range, operating temperature, and peripheral clock configuration in the manufacturer documentation before releasing the PCB. This page also synthesizes verified distributor pricing, package details, alternatives, and practical implementation guidance for STM32L051K8T6 evaluation.

Запрос цены Контакты
STM32L051K8U7 - 32MHz 64KB MCU | STMicroelectronics
STM32L051K8U7

STM32L051K8U7 - 32MHz 64KB MCU | STMicroelectronics

STMicroelectronics STM32L051K8U7 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M0+ core, 32 MHz maximum operating frequency, 64 KB of Flash memory, and a 32-pin UFQFPN 5 x 5 mm package. Its industrial temperature rating extends from -40 °C to +105 °C, making it suitable for embedded systems that require compact packaging, low-power operation, and mixed-signal processing. An ultra-low-power microcontroller is an embedded semiconductor that executes control, measurement, communications, and data-processing tasks while minimizing energy consumption. The STM32L0 family combines a Cortex-M0+ processor with low-power modes, analog peripherals, and embedded Flash in one compact device. This hierarchy places the STM32L051K8U7 among low-power 32-bit microcontrollers for battery-powered, industrial, sensor, and communications products. The device includes a 64 KB Flash program-memory area, a 32-bit Arm Cortex-M0+ core, and a maximum clock frequency of 32 MHz. Its 12-bit analog conversion capability supports sensor and process-control designs, while the ultra-safe low-power brownout reset and programmable voltage detector improve system supervision. A 32 kHz oscillator supports real-time-clock-oriented designs, and oscillator options include a 1 to 25 MHz crystal interface. The STM32L051 architecture is aimed at cost-sensitive embedded control rather than high-performance computing. Its compact UFQFPN package reduces board area, while the Cortex-M0+ instruction set supports efficient event handling and peripheral control. The product family is positioned for applications where low standby power, fast startup, and a broad set of mixed-signal peripherals are more valuable than a large memory footprint. Typical applications include industrial sensor nodes, low-power data loggers, building and access controls, compact instrumentation, battery-operated accessories, and connected equipment. A 12-bit ADC is useful for reading analog sensors, while low-power operation supports devices that spend most of their time in sleep or stop modes. The -40 °C to +105 °C range also supports applications exposed to temperature variation beyond typical commercial room-temperature conditions. PCB design should preserve the package land pattern, exposed-pad connection, and decoupling requirements exactly as defined in the manufacturer datasheet. Place input and output capacitors close to their associated supply pins, keep sensitive analog and oscillator routes away from fast-switching nodes, and verify the exposed thermal-pad solder plan for production assembly. Firmware validation should include reset behavior, brownout thresholds, clock startup, ADC calibration, and low-power wake-up tests. This product summary combines manufacturer positioning, verified distributor specifications, package information, sourcing guidance, and engineering-oriented selection criteria. It is designed to help engineers identify the correct STM32L0 device, confirm footprint and environmental requirements, and plan the analog, power, firmware, and PCB work needed for a reliable embedded design.

Запрос цены Контакты
STM32L051R6T6 - 32MHz Cortex-M0+ MCU | STMicroelectronics
STM32L051R6T6

STM32L051R6T6 - 32MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L051R6T6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M0+ RISC core operating at 32 MHz, with 32 KB of Flash memory in a 64-pin LQFP package measuring 10 x 10 mm. It is designed for compact, low-power embedded systems operating from 2.5 V or 3.3 V supplies. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The STM32L0 series belongs to the Arm Cortex-M microcontroller hierarchy and targets energy-efficient control applications. Its low-power architecture supports battery-powered sensing, portable instruments, industrial controls, and connected equipment where both processing capability and standby consumption matter. Key characteristics include 32-bit instruction processing, a 32 MHz maximum clock, 32 KB of Flash program memory, and a 64-LQFP surface-mount package. The 32 KB Flash capacity provides sufficient space for compact firmware, while the 10 x 10 mm package supports space-constrained boards. Operation at 2.5 V and 3.3 V aligns the device with conventional embedded and industrial supply rails. The STM32L051R6T6 uses the Arm Cortex-M0+ architecture, which provides a compact instruction set designed for microcontrollers rather than application processors. This architecture balances processing efficiency with low implementation overhead. The 32 MHz clock rate supports responsive control loops and communication tasks, while the STM32L0 power-management features are intended to reduce energy use during inactive periods. Typical applications include low-power sensor nodes, battery-operated measurement equipment, access-control terminals, compact industrial controllers, portable medical or diagnostic devices, and IoT-connected products. In these systems, the microcontroller can consolidate multiple peripheral functions into a single device while using low-power operating modes when continuous processing is unnecessary. PCB design should preserve the pin assignments and electrical characteristics shown in the manufacturer pin-definition table. Confirm the intended oscillator, decoupling, reset, and programming connections before layout release. Firmware compatibility between related STM32L0 devices must be evaluated through the manufacturer’s device migration and peripheral documentation rather than assumed from package similarity alone. This page combines the manufacturer product information with package-level comparison data, drop-in candidates, sourcing guidance, and practical design notes. It helps engineers distinguish same-footprint alternatives from devices that also require changes to firmware, clock configuration, peripherals, or board layout.

Запрос цены Контакты
STM32L051R8H6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32L051R8H6

STM32L051R8H6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

STMicroelectronics STM32L051R8H6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M0+ core, 32 MHz maximum operating frequency, and 64 KB of embedded Flash memory. It is supplied in a 64-pin TFBGA package measuring 5 mm by 5 mm. The STM32L051 access-line family targets compact, energy-conscious embedded systems where processing performance, memory density, and a small board area must coexist. A microcontroller is a programmable system-on-chip that integrates a processor core, Flash program memory, SRAM, peripherals, and communication interfaces on one package. The STM32L0 product hierarchy combines an Arm Cortex-M0+ core with ultra-low-power design techniques for battery-powered sensors, industrial controls, connected equipment, and consumer devices. Its 32-bit architecture supports compact instruction decoding, efficient event handling, and real-time control without requiring a separate external processor. Key characteristics include a 32 MHz operating frequency, 64 KB of Flash, a 12-bit ADC, and an operating temperature range from -40 °C to +85 °C. The device belongs to STMicroelectronics' STM32L051x6/x8 access-line range, combining general-purpose embedded control with low-power operation. Its 64-pin TFBGA footprint supports dense PCB layouts while providing a broad selection of I/O and peripheral functions. The Arm Cortex-M0+ processor uses a compact instruction set designed for cost- and power-sensitive embedded applications. Firmware execution, peripheral configuration, and interrupt handling are managed within the integrated microcontroller, reducing the component count compared with separate processor, memory, and interface solutions. The 64 KB Flash provides room for application code, configuration data, and boot logic, while the access-line positioning supports straightforward embedded product development. Typical uses include low-power sensor nodes, industrial monitoring modules, compact motor controllers, wearable accessories, smart-home endpoints, and battery-operated measurement equipment. The small 5 mm by 5 mm TFBGA package is especially useful where PCB area is constrained, although fine-pitch assembly, inspection, and rework require suitable manufacturing capability. For a new design, verify the exact pin assignments, exposed-pad requirements, decoupling network, clock configuration, and peripheral assignments against the manufacturer datasheet and package drawing. Because this part uses a fine-pitch ball-grid array, PCB design should include the required land pattern, via-in-pad considerations where appropriate, thermal-via strategy, and assembly tolerances before schematic sign-off. This product page combines manufacturer and distributor technical information with pin-compatible family alternatives, application guidance, comparison criteria, and practical PCB considerations to support component selection, design review, and sourcing decisions for the STM32L051R8H6.

Запрос цены Контакты
STM32L051R8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32L051R8T6

STM32L051R8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

STMicroelectronics STM32L051R8T6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M0+ processor core, operating at up to 32 MHz and incorporating 64 KB of Flash memory. The device is supplied in a 64-pin LQFP package measuring 10 mm by 10 mm. Its combination of a 32-bit RISC core, compact surface-mount package and 64 KB program memory makes it suitable for embedded control, sensing, communication and low-power monitoring systems. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripheral interfaces and clocking circuitry into one package. The STM32L0 series belongs to the hierarchy of embedded microcontroller, 32-bit RISC processor, embedded processor and semiconductor. Applications commonly require a compact controller that can execute firmware, acquire data, control outputs and communicate with sensors or other system components without requiring a separate processor and memory devices. The STM32L051R8T6 uses an Arm Cortex-M0+ core capable of 32 MHz operation and provides 64 KB of Flash memory, organized as 64K by 8 bits. Its 64-LQFP 10 mm by 10 mm package supports surface-mount assembly and provides a mechanically substantial alternative to smaller leadless packages. The STMicroelectronics product family is identified as an access-line, ultra-low-power MCU family, making the device relevant to designs where operating efficiency and integration are important. The exact peripheral set, RAM capacity, supply limits, pin assignments, clock tree and electrical characteristics are governed by the manufacturer documentation for the STM32L051x6 and STM32L051x8 device family. Firmware selection should account for the specific order code, package drawing, exposed peripheral pins and errata information. Because firmware and board support are closely tied to silicon revision, developers should treat the complete order code as the controlling device identifier. Typical application directions include compact environmental sensors, industrial sensing nodes, low-power data loggers, actuator controllers, communications modules and embedded accessories. In these systems, the Cortex-M0+ instruction set handles real-time control tasks, while the integrated Flash memory stores application firmware. The 64-pin LQFP package can also make prototype assembly and signal access more convenient than a very small leadless package. PCB planning should preserve the LQFP-64 footprint, pad geometry, pin-1 orientation and all exposed leads. Decoupling, grounding, clock stability and unused-pin treatment must follow the manufacturer reference design and device documentation. Software bring-up should also verify the low-power mode configuration, peripheral clock gates and debugger connection because these details affect both energy use and board-level reliability. This product record combines the exact order-code attributes, package information, commercial inquiry workflow, drop-in candidates and application-oriented engineering guidance in one concise reference. It helps engineers distinguish the STM32L051R8T6 from related MCU options before committing the 64-LQFP footprint to a PCB.

Запрос цены Контакты
STM32L051R8T7 - 32MHz Cortex-M0+ | STMicroelectronics
STM32L051R8T7

STM32L051R8T7 - 32MHz Cortex-M0+ | STMicroelectronics

STMicroelectronics STM32L051R8T7 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 64 KB of Flash program memory in a 64-LQFP 10 x 10 mm package. The device also provides 8 KB of SRAM, 2 KB of EEPROM, a memory protection unit, and an extensive set of embedded peripherals for compact, low-power embedded systems. An ultra-low-power microcontroller is a semiconductor that prioritizes energy efficiency while still providing programmable real-time control. The STM32L0 access line belongs to the hierarchy microcontroller -> embedded processor -> Arm Cortex-M0+ microcontroller -> ultra-low-power MCU. It is intended for battery-powered equipment, industrial sensing, connected nodes, and compact products where the system must perform useful work while consuming as little energy as practical. Key characteristics include a 32-bit Arm Cortex-M0+ core, a maximum indicated operating frequency of 32 MHz, and 64 KB of Flash organized as 64K x 8. The STM32L051x6/8 family also incorporates 8 KB of RAM, 2 KB of data EEPROM, and a memory protection unit. Its 64-LQFP package provides 64 external leads for access to the device's GPIO and peripheral resources on a board designed around a 10 x 10 mm footprint. The Cortex-M0+ architecture supports compact instruction encoding and efficient real-time execution, while the STM32L0 power-management features target low-energy operation across active, low-power, sleep, and stop-oriented use cases. The memory protection unit adds isolation and access-control capability to the embedded software environment. Exact peripheral configurations, clock limits, voltage ranges, current consumption, and temperature limits should be selected from the manufacturer datasheet for the complete STM32L051x6/8 device family. Typical uses include low-power sensor nodes, compact industrial controllers, battery-powered measurement instruments, wearable accessories, and IoT devices connected to analog or digital sensors. The 64 KB Flash capacity is suitable for moderate control and communication firmware, while the Cortex-M0+ core and low-power feature set help balance processing performance with energy consumption. PCB design should preserve the 64-LQFP land pattern, power and decoupling connections, clock requirements, and exposed peripheral assignments exactly as defined for STM32L051R8T7. Software selection should account for the complete family datasheet, including peripheral availability, interrupt mapping, memory map, bootloader behavior, and development-tool support, rather than assuming that every L0-family device has identical resources. This product page combines the manufacturer family information, distributor component identification, package and memory details, practical application guidance, and clearly qualified drop-in candidates. It also highlights what engineers should verify when changing orderable temperature grades or considering the STM32L051R8 for an embedded design.

Запрос цены Контакты
STM32L052C8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32L052C8T6

STM32L052C8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

The STMicroelectronics STM32L052C8T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz maximum clock, 64 KB of Flash memory, and a 48-LQFP 7 mm × 7 mm package. It integrates one 12-bit ADC with hardware oversampling, one DAC, two ultra-low-power comparators, multiple timers, an RTC, and USB 2.0 crystal-less connectivity for compact control and sensor systems. An ultra-low-power microcontroller is an embedded semiconductor that combines a processor core, memory, analog interfaces, timers, and communication peripherals while minimizing energy use during active, sleep, and standby operation. The STM32L0 series belongs to the Arm Cortex-M microcontroller hierarchy and is designed for battery-powered instruments, connected sensors, industrial controls, and other systems where low standby current and compact integration are central requirements. The STM32L052C8T6 provides 64 KB of Flash and a 32 MHz Arm Cortex-M0+ processor. Its analog subsystem includes one 12-bit ADC with hardware oversampling and one DAC, while two comparators support low-power threshold detection. The device also provides USB 2.0 crystal-less connectivity, one RTC, one SysTick timebase, three general-purpose 16-bit timers, one basic timer, one low-power timer, and two watchdogs. Its peripheral mix supports both event-driven sensing and periodic control. Hardware oversampling can improve effective ADC resolution when the application can accept a longer conversion sequence, while the DAC enables analog output from a compact controller. The crystal-less USB interface simplifies designs that do not require an external USB clock source, although final firmware and board-level validation remain necessary. Typical uses include USB-connected low-power data loggers, industrial sensor nodes, compact environmental monitors, battery-powered accessories, and USB-to-serial or configuration interfaces. The 48-LQFP package also exposes more I/O than smaller microcontroller packages, making the device useful when a board needs USB, mixed analog inputs, and several timers without moving to a higher pin count. Designers should preserve USB signal integrity with a controlled impedance PCB layout, place decoupling capacitors close to the supply pins, and follow the pin-description table in the manufacturer datasheet when assigning board functions. Verify oscillator, USB, analog-reference, and low-power-mode requirements against the electrical characteristics before releasing a production layout. This page organizes the core MCU specifications, package details, application guidance, design considerations, and qualified drop-in alternatives into a single engineering reference for evaluating the STM32L052C8T6 in new or existing 48-LQFP designs.

Запрос цены Контакты
STM32L052K6T6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics
STM32L052K6T6

STM32L052K6T6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L052K6T6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller operating at up to 32 MHz, with 32 KB of Flash memory and USB 2.0 crystal-less connectivity in a 32-LQFP 7x7 mm package. It combines low-power embedded control with serial peripherals for connected industrial, IoT, sensor, and USB-powered products. A microcontroller is a semiconductor that integrates a processor core, programmable memory, digital I/O, and peripherals into one device. The STM32L0 family belongs to the ARM Cortex-M microcontroller hierarchy and targets embedded systems where compact size, efficient processing, and low standby or operating power are important. Its peripheral integration reduces the component count needed for communications, timing, analog measurement, and control. The verified product information identifies an ARM Cortex-M0+ core, 32 MHz operation, 32 KB Flash organized as 32K x 8, USB 2.0 crystal-less connectivity, and a 32-LQFP package. Distributor listings also identify I2C and SPI support, making the device relevant for sensor networks, USB-to-serial equipment, compact control boards, and low-power connected products. The exact SRAM, voltage range, temperature limits, and peripheral ratings were not supplied in the verified excerpts and therefore are not asserted here. The crystal-less USB feature is a practical differentiator for designs that need USB connectivity without relying on a dedicated external crystal for the specified USB implementation. Firmware must still satisfy the USB clocking, impedance, power, and enumeration requirements described by the manufacturer. The 32 MHz Cortex-M0+ core provides a responsive platform for control logic while retaining the STM32 family's low-power positioning. Typical applications include low-power IoT nodes, USB-connected sensors, industrial instrumentation, low-power control boards, compact data-acquisition products, and embedded automation modules. These uses benefit from the MCU's combination of USB, I2C, SPI, Flash, and a compact 32-LQFP footprint. The 7x7 mm package is easy to route on a reasonably dense PCB while preserving exposed assembly and inspection access. Designers should verify the complete pinout, alternate-function mapping, power requirements, decoupling recommendations, clocking scheme, and USB layout against the official STM32L052K6 datasheet before layout release. USB differential routing, ground-return continuity, input filtering, and exposed-pad thermal design are more important than simply matching the package outline. Firmware should also confirm peripheral mapping and low-power-mode timing rather than assuming that a lower-power alternative is automatically interchangeable. This page combines verified distributor and manufacturer listings with structured application, comparison, and design guidance. It is intended to help engineers identify the correct STM32L052K6T6 platform while separating confirmed data from parameters that still require direct datasheet confirmation.

Запрос цены Контакты
STM32L052K6U6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics
STM32L052K6U6

STM32L052K6U6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics

STMicroelectronics STM32L052K6U6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz maximum clock, 32 KB flash memory, and USB 2.0 crystal-less connectivity in a 32-pin UFQFPN package measuring 5 mm by 5 mm. The device is designed for energy-sensitive embedded systems that require compact control, serial connectivity, timers, and low power operation. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and input/output interfaces. The STM32L0 series belongs to the ARM Cortex-M0+ class of embedded processors, combining a compact instruction set with broad peripheral integration. This product hierarchy places the STM32L052K6U6 within microcontrollers, embedded processors, and the broader semiconductor category. Key verified features include a 32-bit ARM Cortex-M0+ core, operation up to 32 MHz, 32 KB flash, and USB 2.0 crystal-less connectivity. The 32-pin UFQFPN package supports compact surface-mount layouts where board area is constrained. Its low-power positioning makes it relevant for connected sensors, USB peripherals, industrial controls, and battery-operated equipment, provided that the selected operating modes and peripheral requirements are confirmed against the manufacturer documentation. The part is suitable when a design needs an Arm Cortex-M0+ control core, USB connectivity, and a compact package. Its 32 MHz clock specification provides a clear performance target for embedded firmware, while the 32 KB flash capacity should be checked carefully against application code size, bootloader requirements, and future updates. The crystal-less USB feature can simplify clock integration, but USB layout, power, firmware, and signal-integrity requirements still require careful implementation. Before design release, verify the complete pin assignment, electrical limits, memory map, USB support, operating-temperature grade, and package land pattern in the official STMicroelectronics documentation. The supplied verified data confirms the core, clock, flash, USB connectivity, package, and distributor identity, but it does not provide every electrical or pin-level parameter required for a complete hardware design. This product page combines verified manufacturer and distributor information, structured specifications, application guidance, and design considerations. It is intended to support component identification and sourcing while clearly identifying details that still require confirmation from the official STM32L052K6 datasheet.

Запрос цены Контакты
STM32L052K8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32L052K8T6

STM32L052K8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

STMicroelectronics STM32L052K8T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz CPU, 64KB of Flash, USB 2.0 crystal-less connectivity, and a 32-LQFP 7 x 7 mm package. The STM32L0 series targets compact embedded products that require efficient processing and low standby power without the resource demand of a higher-performance microcontroller. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces into one device. In the product hierarchy, the STM32L052K8T6 is an Arm Cortex-M0+ MCU, an STM32L0-series microcontroller, a 32-bit embedded controller, and an ultra-low-power semiconductor. It is suited to connected sensors, compact USB devices, industrial modules, and portable products requiring USB and serial peripherals. The manufacturer product information identifies a 32 MHz operating frequency, 64KB organized as 64K x 8 Flash, a 32-bit architecture, and USB 2.0 crystal-less connectivity. Listed communication capabilities also include I2C and SPI. These features allow the device to move data between sensors, actuators, storage, and a USB host while retaining the low-power operating characteristics associated with the STM32L0 family. STM32L052K8T6 integrates several embedded peripherals into a single 32-LQFP package. Its 64KB Flash provides program storage for control logic, communication firmware, and configuration data. The Cortex-M0+ architecture provides a compact instruction set suited to real-time embedded workloads, while the documented I2C and SPI interfaces support common industrial and consumer peripherals. USB 2.0 crystal-less operation is particularly relevant to designs that need direct connectivity without a separate external USB clock source. Typical applications include low-power USB sensor nodes, compact data loggers, industrial condition-monitoring modules, building controls, and wearable or portable accessories. The 7 x 7 mm LQFP footprint is large enough for accessible manufacturing and inspection while remaining suitable for space-conscious boards. Firmware can collect sensor readings over I2C or SPI, store operational information in Flash, and communicate with a host through USB. A primary design consideration is power-budget allocation across active, sleep, and shutdown operation. Firmware should disable unused peripherals, configure clock sources correctly, and select the lowest-energy mode compatible with wake-up requirements. Because USB clocking, external interfaces, and analog functions can affect current consumption, measure the complete assembled product under realistic traffic and environmental conditions rather than relying only on nominal processor activity. This product page combines the manufacturer specifications with package, interface, application, replacement, and procurement guidance. It also distinguishes true same-footprint candidates from options that require package or firmware changes, helping engineers evaluate the STM32L052K8T6 for embedded USB, low-power sensing, and connected-control designs.

Запрос цены Контакты
STM32L052K8U6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics
STM32L052K8U6

STM32L052K8U6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics

STMicroelectronics STM32L052K8U6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 64 KB of Flash memory and crystal-less USB 2.0 connectivity in a 32-pin UFQFPN 5 x 5 mm package. The device combines a compact embedded-control footprint with analog conversion, timing, real-time-clock, watchdog, and low-power peripherals for connected sensing and control designs. An ultra-low-power microcontroller is an embedded semiconductor designed to execute firmware while minimizing energy consumption between active processing intervals. The STM32L0 family belongs to the MCU hierarchy, extending from general-purpose embedded processors into low-power systems for battery-operated instruments, industrial sensors, compact data loggers, USB accessories, and compact consumer equipment. Its low-power focus makes the STM32L052K8U6 suitable for systems that spend substantial time in sleep or low-power operating modes. Key features include a 32-bit Arm Cortex-M0+ processor, 64 KB Flash, a 12-bit ADC with hardware oversampling, one DAC, two ultra-low-power comparators, three general-purpose 16-bit timers, one low-power timer, one basic timer, an RTC, and SysTick. Two watchdogs provide independent and windowed watchdog functions, while USB 2.0 support can operate without a crystal according to the manufacturer product information. The STM32L052x6/8 architecture integrates the analog and timing resources needed to reduce external component count. The ADC, DAC, comparators, RTC, and multiple timer types can support signal acquisition, local excitation, waveform generation, event detection, and periodic sampling. USB crystal-less operation can simplify peripheral layouts, although firmware, clock configuration, power budgeting, and signal-integrity validation remain necessary for each board design. Typical applications include USB-connected sensors, compact environmental monitors, industrial measurement modules, low-power data loggers, wearable accessories, and embedded control boards requiring both analog inputs and USB connectivity. The 32-pin 5 x 5 mm package also supports space-constrained products while retaining a generous peripheral set for general-purpose embedded applications. Designers should verify startup behavior, clock tolerance, USB electrical characteristics, decoupling, and low-power mode timing against the manufacturer datasheet. Place the required input, output, and analog bypass capacitors close to their associated pins, provide a clean ground return, and confirm that the exposed-pad thermal and assembly requirements match the PCB layout. This product overview combines the manufacturer's core MCU specifications with practical application guidance, package-aware comparison information, and engineering considerations for USB, analog, power, and PCB implementation. It is intended to help engineers evaluate the STM32L052K8U6 against same-package alternatives before committing to a board layout.

Запрос цены Контакты
STM32L052R6T6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics
STM32L052R6T6

STM32L052R6T6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics

The STMicroelectronics STM32L052R6T6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz clock, 32 KB of embedded Flash memory, and USB 2.0 connectivity in a 64-LQFP 10 x 10 mm package. It combines low-power operation with 8 KB SRAM, 2 KB EEPROM, a 12-bit ADC, and a DAC for compact USB-connected sensing, control, and data-acquisition systems. An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption during active processing and standby operation. Within the product hierarchy, this device belongs to the STM32L0 family of 32-bit ARM Cortex-M0+ microcontrollers, combining a real-time microcontroller core, embedded nonvolatile memory, analog peripherals, and communication interfaces on one package. This integration allows a board to perform local sensing, control, and USB data transfer without adding a separate host controller. Key features include a maximum CPU frequency of 32 MHz, 32 KB of Flash for firmware storage, and 8 KB of SRAM for working memory. The integrated USB 2.0 controller supports crystal-less operation, reducing the number of external timing components required in USB designs. The analog feature set includes an ADC and DAC, while the 2 KB EEPROM provides nonvolatile storage for calibration data, configuration parameters, or serial numbers. The STM32L0 architecture is suited to applications where energy efficiency matters as much as processing capability. Its low-power feature set supports duty-cycled measurement systems in which the controller wakes, samples, processes, transmits data, and returns to a low-power state. USB connectivity enables configuration, logging, firmware update, and direct sensor-data transfer without requiring a separate communications processor. Typical applications include compact USB-connected environmental monitors, industrial sensor nodes, low-power data loggers, portable measurement instruments, and USB-controlled peripheral boards. The 64-LQFP package provides a conventional leaded footprint that is easier to inspect and hand-prototype than a fine-pitch ball-grid-array package, while remaining suitable for automated surface-mount assembly. PCB design should route USB D+ and D- as a controlled-impedance differential pair, place the 1.5 percent USB clock-crystal load capacitors close to the device, and provide the decoupling network specified in the manufacturer pinout and application guidance. Firmware development also requires confirming the low-power regulator settings, clock-tree configuration, and analog reference arrangement before reducing the operating frequency or disabling unused peripherals. This page consolidates manufacturer and distributor information into an engineering-oriented reference covering connectivity, memory, analog capability, package details, application fit, and same-family replacement options. It also identifies where device-specific verification is still required, helping designers move from initial component selection to a defensible hardware and firmware design.

Запрос цены Контакты
STM32L052R8H6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics
STM32L052R8H6

STM32L052R8H6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L052R8H6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at up to 32 MHz, with 64 KB of Flash memory, 8 KB of SRAM, and USB connectivity in a 64-TFBGA package measuring 5 x 5 mm. It combines embedded USB connectivity with peripheral resources suited to compact, energy-conscious embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one package. The STM32L0 product family belongs to the hierarchy of embedded microcontroller, 32-bit processor, Arm Cortex-M microcontroller, and low-power embedded controller. This product type allows one device to execute application firmware, acquire sensor data, control outputs, and communicate with a host or other embedded systems. Key features include 64 KB of Flash, 8 KB of SRAM, 2 KB of EEPROM, USB 2.0 support, and 12-bit ADC and DAC resources. Its Arm Cortex-M0+ core operates at up to 32 MHz, providing adequate performance for low-power control, sensor monitoring, data acquisition, human-interface equipment, and USB-connected peripheral designs. The compact 64-TFBGA package supports space-constrained boards but requires careful PCB layout and inspection because its ball grid provides fine-pitch routing opportunities. The STM32L052R8H6 is designed for embedded applications where low power, USB connectivity, and moderate processing performance are important. Its architecture sits between simple fixed-function controllers and more complex application processors. Firmware can use the Cortex-M0+ instruction set while USB provides a standard peripheral interface for configuration, data exchange, and control. The manufacturer positions the STM32L052x6 and STM32L052x8 devices as ultra-low-power microcontrollers with USB 2.0 crystal-less connectivity. Typical uses include compact USB sensor nodes, industrial monitoring modules, USB-connected control panels, compact instrumentation, and low-power embedded accessories. USB connectivity can reduce the number of external interface components, while the 32 MHz core and 8 KB SRAM allow local control logic to execute without a higher-power processor. Designers should select the correct clock, USB transceiver, decoupling, and programming configuration from the manufacturer documentation. PCB implementation requires careful treatment of the 64-TFBGA land pattern, power routing, and exposed-pad or thermal-management requirements specified for the exact package variant. Firmware development should follow the STM32CubeMX and STM32Cube programming workflow where supported. USB firmware should use the device's supported crystal-less USB configuration and validate enumeration timing across the intended host, power, and bus conditions. This product page combines the manufacturer product information, distributor specifications, package details, and practical design guidance in a format that helps engineers evaluate the STM32L052R8H6 for low-power USB embedded designs. It also identifies where a true pin-compatible replacement cannot yet be confirmed, preventing a merely similar microcontroller from being presented as a drop-in substitute.

Запрос цены Контакты
STM32L052R8T6 - 32MHz 64KB USB MCU | STMicroelectronics
STM32L052R8T6

STM32L052R8T6 - 32MHz 64KB USB MCU | STMicroelectronics

The STMicroelectronics STM32L052R8T6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz maximum CPU frequency, 64 KB of Flash memory, and USB 2.0 crystal-less connectivity in a 64-LQFP 10 x 10 mm package. The device combines an energy-efficient embedded design with USB connectivity for compact, low-power electronic products. An ultra-low-power microcontroller is a semiconductor designed to complete control and connectivity tasks while minimizing energy consumption during active operation and low-power modes. In the product hierarchy, the STM32L052R8T6 is an MCU, an embedded processing IC, and a member of STMicroelectronics' STM32L0 family. Its compact package and USB interface make it suitable for devices that need firmware-driven control, data exchange, and low standby demand without requiring a higher-power application processor. Key verified features include an ARM Cortex-M0+ core, 32-bit processing, operation up to 32 MHz, and 64 KB of programmable Flash. The integrated connectivity supports USB 2.0 operation without an external crystal, while the specified 2.5 V and 3.3 V operating voltages support conventional embedded supply environments. The STM32L052x6/8 family is positioned by STMicroelectronics as an ultra-low-power platform for connected, compact products. The 64-LQFP package exposes substantially more I/O than smaller microcontroller packages, allowing designers to connect external sensors, displays, communication transceivers, and control interfaces without moving to a more complex device. At the same time, the Cortex-M0+ architecture keeps the MCU suitable for embedded control rather than demanding graphical or high-throughput workloads. Exact RAM, peripheral, timer, GPIO, and electrical limits are not present in the supplied excerpts and should be confirmed in the manufacturer datasheet. Typical applications include USB-connected sensors, compact industrial controls, medical-device peripherals, battery-operated accessories, USB-to-data acquisition systems, and low-power monitoring equipment. The crystal-less USB capability can simplify connector-based products when the final board design and firmware satisfy STMicroelectronics' USB clocking requirements. The main design consideration is package and firmware validation. Engineers should confirm the complete 64-pin assignment, USB impedance routing, decoupling, clocking, and peripheral configuration against the manufacturer documentation. This page combines verified distributor specifications, pricing context, same-family alternatives, and practical sourcing guidance that is not consolidated in a single manufacturer excerpt.

Запрос цены Контакты
STM32L053C6T6 - 32MHz Ultra-Low-Power MCU | STMicroelectronics
STM32L053C6T6

STM32L053C6T6 - 32MHz Ultra-Low-Power MCU | STMicroelectronics

STMicroelectronics STM32L053C6T6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz operating frequency, 32 KB of Flash memory, USB 2.0 connectivity, and a 48-LQFP 7 x 7 mm package. It operates from 1.8 V to 3.6 V with brown-out detection, or down to 1.65 V in power-down mode, and supports an extended -40°C to +125°C temperature range. An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption while retaining the processing, memory, and peripheral capabilities needed for embedded control. The STM32L0 series belongs to the ARM Cortex-M0+ microcontroller hierarchy and combines a compact general-purpose processor with energy-saving modes, making it suitable for battery-operated, portable, and connected devices. The STM32L053C6T6 includes 32 KB of Flash, a 32 MHz ARM Cortex-M0+ core, USB 2.0 crystal-less connectivity, and an LCD-capable feature set. Its 1.8 V to 3.6 V operating supply supports low-energy embedded systems. A broad temperature option from -40°C to +125°C supports industrial and extended-temperature environments when the appropriate ordering variant is specified. The device's low-power architecture includes multiple power-saving modes for designs that spend substantial time idle. USB connectivity adds a practical interface for configuration, data exchange, and firmware update workflows, while the Cortex-M0+ core provides a 32-bit execution environment suitable for control logic, communications, and compact user interfaces. Typical applications include USB-connected sensors, low-power data loggers, compact industrial controllers, wearable and portable devices, and USB-to-LCD interface equipment. In each case, the combination of 32 KB Flash, a 32 MHz core, USB 2.0, and low-power operating modes supports a useful balance of capability, board area, and energy efficiency. Designers should verify the exact pin functions, peripheral availability, memory map, and exposed-pin configuration against the manufacturer datasheet before layout. USB signal routing, crystal-less operation, decoupling, and low-power mode entry are especially important because they affect firmware scheduling, EMI performance, and reliable peripheral communication. This page combines manufacturer specifications, distributor pricing, pin-compatible alternatives, comparison parameters, and practical design guidance. It also distinguishes verified facts from parameters requiring direct review of the STM32L053x6/8 datasheet, helping engineers source the device without relying on unverified substitutions.

Запрос цены Контакты
STM32L053C8T6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L053C8T6

STM32L053C8T6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L053C8T6 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 32 MHz. It features 64 KB of Flash memory and 8 KB of SRAM, with a rich set of peripherals including USB 2.0, 12-bit ADC, DAC, comparators, and multiple communication interfaces. The device is housed in a 48-pin LQFP package, making it suitable for space-constrained applications. An ultra-low-power microcontroller (MCU) is a system-on-chip that integrates a processor core, memory, and peripherals, optimized for minimal energy consumption. The STM32L0 series is part of the STM32 family, which spans from entry-level Cortex-M0+ to high-performance Cortex-M7 cores. These MCUs are designed for battery-powered and energy-harvesting applications where power efficiency is critical, often featuring multiple low-power modes and dynamic voltage scaling. Key features include multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop with RTC, Standby with RTC), a 12-bit ADC with hardware oversampling, a 12-bit DAC, two ultra-low-power comparators, and a USB 2.0 crystal-less device. The device also integrates a real-time clock (RTC) with calendar and alarm functions, and a true EEPROM emulation. The operating voltage range is 1.8V to 3.6V, with a temperature range of -40°C to +85°C. The STM32L053C8T6 is built on ST's ultra-low-power technology, featuring a flexible power management that allows the core to run at 32 MHz while consuming only 84 µA/MHz in Run mode. The device supports a wide range of communication interfaces including I2C, SPI, USART, and LPUART, making it versatile for IoT and sensor applications. The integrated USB 2.0 interface supports both device and host modes, with a crystal-less design that reduces BOM cost. Typical applications include IoT sensor nodes, wearable devices, smart home controllers, industrial sensors, and portable medical devices. The ultra-low-power consumption and rich analog peripherals make it ideal for battery-powered systems that require long operational life. The device also supports firmware updates via USB or UART bootloader, simplifying field maintenance. When designing with this MCU, careful attention should be paid to the power supply decoupling and the selection of low-power modes to maximize battery life. The use of the internal 16 MHz HSI oscillator can reduce external component count, but for precise timing, an external crystal is recommended. The device's low-power modes require proper configuration of the RTC and wake-up sources to achieve optimal energy efficiency.

Запрос цены Контакты
STM32L053R6T6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics
STM32L053R6T6

STM32L053R6T6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics

The STMicroelectronics STM32L053R6T6 is an ultra-low-power, 32-bit ARM Cortex-M0+ microcontroller operating up to 32 MHz, with 32 KB of Flash and USB 2.0 crystal-less connectivity in a 64-pin LQFP package measuring 10 x 10 mm. The device combines a compact low-power architecture with USB, LCD-oriented connectivity, and a broad set of embedded peripherals for cost-sensitive control systems. An ultra-low-power microcontroller is a semiconductor designed to minimize both active and standby energy consumption. The STM32L0 product family belongs to the hierarchy of 32-bit embedded MCUs, general-purpose processors, and programmable semiconductor controllers. This makes the STM32L053R6T6 suitable for systems that must perform control, communications, sensing, and data acquisition while preserving strict battery-life targets. Key characteristics include a 32 MHz ARM Cortex-M0+ core, 32 KB of Flash organized as 32K x 8, 8 KB of RAM, and USB 2.0 support that can operate without a crystal. The supported operating-voltage range is 1.65 V to 3.6 V, allowing deployment in industrial, consumer, medical-instrument, and embedded-control products. The 64-LQFP package also provides a generous pin count for external storage, sensors, displays, communications, and mixed-signal interfaces. The STM32L053R6T6 uses a compact 32-bit RISC architecture optimized for energy-efficient embedded control. Its USB connectivity adds a practical peripheral function without requiring an external USB transceiver. The T6 ordering code identifies the temperature and packaging configuration, while the R6 designation corresponds to the 64-pin device with 32 KB of Flash. Designers should still validate clocking, bootloader, peripheral mapping, and firmware support for the exact board configuration before production release. Typical uses include low-power USB data loggers, portable monitoring equipment, sensor-hub controllers, small human-machine interfaces, USB-connected industrial controls, and battery-operated accessories. USB 2.0 crystal-less operation can simplify clock-tree design, while the low-voltage supply range supports compact mixed-signal systems. The 64-pin package is particularly useful when the design needs both communications and a higher number of general-purpose I/O connections than smaller 48-pin variants provide. The primary design consideration is supply and clock implementation. Keep the USB interface and high-speed signal routing electrically clean, provide the decoupling and reference components required by the selected USB implementation, and verify oscillator start-up and peripheral timing at the lowest intended input voltage. Confirm the final pin assignments and exposed thermal requirements against the manufacturer pinout and package drawings before routing the PCB.

Запрос цены Контакты
STM32L053R8H6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32L053R8H6

STM32L053R8H6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

The STMicroelectronics STM32L053R8H6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M0+ processor, operating at up to 32 MHz with 64 KB of Flash memory and 8 KB of SRAM. It is available in a 64-TFBGA 5x5 mm package and includes USB 2.0 connectivity, LCD support, ADC and DAC peripherals, and 2 KB of EEPROM. The device operates from 1.8 V to 3.6 V, with operation down to 1.65 V in power-down mode when the brown-out detector is disabled. An ultra-low-power microcontroller is an embedded semiconductor designed to perform control, measurement, communications, and data-processing tasks while minimizing energy consumption. The STM32L053 belongs to the STM32L0 low-power MCU family, combining a compact Cortex-M0+ core with energy-saving modes for battery-powered and always-connected products. Its USB, LCD, and mixed-signal peripherals reduce the need for external components in compact embedded systems. Key features include a 32 MHz Cortex-M0+ CPU, 64 KB of Flash, 8 KB of SRAM, 2 KB of EEPROM, USB 2.0 crystal-less connectivity, and an LCD controller. The MCU also integrates two ultra-low-power comparators sharing an internal or external reference voltage, plus ADC and DAC functions. These resources support low-power sensor nodes, USB-connected accessories, small human-machine interfaces, and portable measurement instruments. The STM32L053R8H6 provides a balanced architecture for embedded control applications where USB connectivity and low-power operation are more important than high processing throughput. Its 1.8 V to 3.6 V operating range accommodates single-cell lithium battery systems after suitable regulation, as well as 3.3 V industrial and consumer equipment. The wide -40 °C to +125 °C temperature range supports applications across industrial, automotive-adjacent, and extended-temperature environments. Typical applications include USB-connected industrial sensors, compact data loggers, low-cost USB power and monitoring accessories, LCD-equipped control panels, and battery-operated diagnostic instruments. The LCD controller is particularly useful for small local displays, while USB enables configuration, firmware updates, and data transfer over a standard serial interface. The ADC, DAC, and comparators support direct sensing and signal-conditioning functions. Designers should use the manufacturer pin-description table when assigning PCB tracks and should confirm the exposed-pad, power, decoupling, and programming requirements for the 64-TFBGA package. USB layout requires careful attention to signal integrity, impedance control, and the placement of its supporting components. Low-power designs should also account for the selected sleep, stop, and standby modes when defining the product's average-current budget. This product page combines the manufacturer device description and datasheet with practical packaging, application, replacement, and design guidance for engineers evaluating the STM32L053R8H6 in compact USB-enabled embedded products.

Запрос цены Контакты
STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics
STM32L053R8T3

STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L053R8T3 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz CPU, 64 KB of Flash memory, 8 KB of SRAM, and USB 2.0 connectivity in a 64-pin LQFP package. It is designed for compact, battery-powered embedded products that require a balance of low active energy, efficient sleep-mode operation, and a broad set of serial peripherals. The STM32L053R8T3 operates from a 1.8 V to 3.6 V supply and supports an expanded 1.65 V to 3.6 V range when the brown-out detector is disabled. An ultra-low-power microcontroller is a semiconductor that spends most of its operating time in low-energy states while retaining the processing and peripheral resources needed to respond to sensor readings, user inputs, and communications. The STM32L053 family combines an ARM Cortex-M0+ processor, embedded Flash and SRAM, analog and digital interfaces, and energy-saving modes in one integrated device. This makes it suitable for connected sensors, compact industrial controls, medical accessories, and USB-powered equipment where board area and standby energy are important constraints. The STM32L053R8T3 provides 64 KB of Flash for firmware and 8 KB of SRAM for working memory. Its USB 2.0 interface includes crystal-less operation, reducing the need for a dedicated USB clock crystal in suitable designs. The device supports a -40 °C to +125 °C temperature range, making it usable across consumer, industrial, and extended-temperature environments. Its 32 MHz ARM Cortex-M0+ core provides responsive control performance while supporting the low-power architecture of the STM32L0 family. Low-power operation is central to the device architecture. The manufacturer describes a comprehensive set of power-saving modes for applications that alternate between active measurement or control and long idle periods. Because the actual energy consumption depends on the selected mode, clock configuration, peripheral activity, and regulator settings, designers should compare the STM32L053R8T3 datasheet current tables against the intended duty cycle rather than relying on a single headline figure. USB operation and analog measurements naturally add activity compared with a design that remains in a deep sleep state. Typical applications include low-power USB sensor nodes, compact data loggers, industrial condition-monitoring terminals, battery-operated measurement instruments, and USB-to-serial or USB-to-wireless bridge products. The 64-pin LQFP provides more I/O than smaller package variants while retaining a conventional surface-mount footprint. The integrated USB controller is particularly useful when a product must enumerate as a standard USB peripheral without adding a separate USB interface controller. Designers should pay particular attention to clock-tree configuration, USB clocking, decoupling, and low-power wake-up sources. Follow the pin-description and alternate-function tables in the manufacturer datasheet when assigning the 64 LQFP pins. Keep the USB data pair routed as a controlled impedance differential pair, provide the required input and output capacitance close to the device, and confirm oscillator requirements for each supported clock source before finalizing the PCB. This product page combines the verified manufacturer specifications, package information, USB connectivity, power-supply range, temperature capability, and practical design considerations with a clear explanation of drop-in alternatives. It is intended to help engineers select the correct memory configuration, package, operating range, and low-power architecture without relying on abbreviated catalog summaries alone.

Запрос цены Контакты
STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST
STM32L053R8T6

STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

The STMicroelectronics STM32L053R8T6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a maximum CPU frequency of 32 MHz, 64 KB of Flash memory, 8 KB of SRAM, and a 64-pin LQFP-64 (10x10 mm) package. What is an ultra-low-power microcontroller? It is an embedded processor optimized to minimize energy consumption while still providing enough compute for sensing, control, and communication tasks. It sits in the product hierarchy: microcontroller -> ARM Cortex-M0+ -> ultra-low-power MCU -> battery-powered embedded system. These devices rely on low-leakage process technology, flexible clock gating, and sleep/stop/standby modes to cut current draw to microamp or nanoamp levels, enabling multi-year operation from a coin cell. Key features include a USB 2.0 full-speed crystal-less device controller, an LCD driver supporting up to 8x28 segments, a 12-bit ADC with hardware oversampling, a 12-bit DAC, two ultra-low-power comparators, and a real-time clock with calendar. The STM32L053R8T6 runs from a 1.8 V to 3.6 V supply (down to 1.65 V in power-down without BOR), operates from -40C to +125C, and provides I2C, SPI, and USART serial interfaces. Technically, this MCU is built in a 110 nm ultra-low-leakage process. It integrates an NVIC, a memory protection unit, a true random number generator, a CRC calculation unit, and a unique 96-bit device ID. Typical Run-mode consumption is 84 uA/MHz, while Standby with RTC is only 0.29 uA. The flexible clock tree accepts an internal 16 MHz RC, an external crystal, or a 32.768 kHz oscillator for low-power RTC timekeeping. Typical applications include portable medical devices, wireless IoT sensor nodes, smart utility meters, wearable devices, and LCD-equipped industrial products. The very low standby current and configurable wake-up events make this MCU ideal for systems that must spend most of their life asleep and wake periodically to sample, log, or transmit. When designing with this device, place a 100 nF decoupling capacitor near each VDD pin and a 1 uF bulk capacitor on the main supply. Configure the RTC, EXTI, or USART wake-up sources to keep average current in the microamp range while preserving responsiveness. This page synthesizes distributor availability, drop-in STM32L0 alternatives, comparison data, and practical low-power design notes that are not reprinted in the datasheet, helping engineers select and validate the part faster.

Запрос цены Контакты
STM32L053R8T7 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32L053R8T7

STM32L053R8T7 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

The STMicroelectronics STM32L053R8T7 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz CPU, 64 KB of Flash memory, USB 2.0 crystal-less connectivity, and LCD support in a 64-LQFP 10 x 10 mm package. It combines a compact 64-pin footprint with low-power operation for cost-sensitive embedded systems that need USB, display control, and general-purpose mixed-signal processing. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The STM32L0 series belongs to the broader embedded-controller hierarchy: Arm Cortex-M0+ core, 32-bit microcontroller, embedded processor, and system-on-chip. Its ultra-low-power positioning makes the STM32L053R8T7 relevant to battery-operated instruments, compact sensors, human-interface devices, and USB-connected accessories where board area and energy consumption are important constraints. The device provides 64 KB of Flash organized as 64K x 8 and operates at up to 32 MHz. USB 2.0 crystal-less connectivity can reduce the external clock and component burden of a USB peripheral design, while LCD support serves display-oriented products. The exact supply range is characterized by distributor listings as 2.5 V and 3.3 V operation. Because these features share one 64-LQFP package, the MCU can consolidate control, display, communications, and sensing functions without moving to a larger package. The STM32L053R8T7 uses the Arm Cortex-M0+ instruction set, which provides a compact 32-bit embedded architecture optimized for low-cost, low-power control applications. Its memory capacity is appropriate for compact firmware, USB device routines, display-control code, state machines, and sensor acquisition. The manufacturer identifies the part as an ultra-low-power MCU with USB and LCD connectivity, making the architecture particularly suitable for small, battery-influenced products rather than high-performance computing. Typical uses include compact USB-to-serial accessories, low-power data loggers, small display modules, industrial sensing nodes, medical monitoring equipment, and energy-limited IoT controls. In each case, the 32 MHz core provides processing headroom while the integrated USB and LCD functions can reduce the number of external devices. Designers must still confirm peripheral availability, interrupt requirements, clock-tree configuration, and low-power mode requirements against the manufacturer datasheet before finalizing a design. A critical layout consideration is USB signal integrity. Keep USB D+ and D- traces short, impedance-controlled, and routed over a continuous reference plane, while placing required USB transceiver and passives close to their relevant pins. The 10 x 10 mm LQFP also demands careful escape routing for its 64 leads, so use via-in-pad or via-adjacent fanout where assembly capability allows. This product page combines manufacturer specifications, distributor availability references, package details, application guidance, and engineering-focused replacement analysis. It is intended to accelerate MCU selection while highlighting the electrical, layout, firmware, and sourcing checks required for a reliable embedded design.

Запрос цены Контакты