STMicroelectronics

STM32L053R6T6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics

Артикул: STM32L053R6T6 ✓ Активен
1.65 V to 3.6 V Vdss 64-LQFP (10 x 10 mm) Package 32 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

STM32L053R6T6 Обзор

The STMicroelectronics STM32L053R6T6 is an ultra-low-power, 32-bit ARM Cortex-M0+ microcontroller operating up to 32 MHz, with 32 KB of Flash and USB 2.0 crystal-less connectivity in a 64-pin LQFP package measuring 10 x 10 mm. The device combines a compact low-power architecture with USB, LCD-oriented connectivity, and a broad set of embedded peripherals for cost-sensitive control systems.

An ultra-low-power microcontroller is a semiconductor designed to minimize both active and standby energy consumption. The STM32L0 product family belongs to the hierarchy of 32-bit embedded MCUs, general-purpose processors, and programmable semiconductor controllers. This makes the STM32L053R6T6 suitable for systems that must perform control, communications, sensing, and data acquisition while preserving strict battery-life targets.

Key characteristics include a 32 MHz ARM Cortex-M0+ core, 32 KB of Flash organized as 32K x 8, 8 KB of RAM, and USB 2.0 support that can operate without a crystal. The supported operating-voltage range is 1.65 V to 3.6 V, allowing deployment in industrial, consumer, medical-instrument, and embedded-control products. The 64-LQFP package also provides a generous pin count for external storage, sensors, displays, communications, and mixed-signal interfaces.

The STM32L053R6T6 uses a compact 32-bit RISC architecture optimized for energy-efficient embedded control. Its USB connectivity adds a practical peripheral function without requiring an external USB transceiver. The T6 ordering code identifies the temperature and packaging configuration, while the R6 designation corresponds to the 64-pin device with 32 KB of Flash. Designers should still validate clocking, bootloader, peripheral mapping, and firmware support for the exact board configuration before production release.

Typical uses include low-power USB data loggers, portable monitoring equipment, sensor-hub controllers, small human-machine interfaces, USB-connected industrial controls, and battery-operated accessories. USB 2.0 crystal-less operation can simplify clock-tree design, while the low-voltage supply range supports compact mixed-signal systems. The 64-pin package is particularly useful when the design needs both communications and a higher number of general-purpose I/O connections than smaller 48-pin variants provide.

The primary design consideration is supply and clock implementation. Keep the USB interface and high-speed signal routing electrically clean, provide the decoupling and reference components required by the selected USB implementation, and verify oscillator start-up and peripheral timing at the lowest intended input voltage. Confirm the final pin assignments and exposed thermal requirements against the manufacturer pinout and package drawings before routing the PCB.

Аналоги без доработки для STM32L053R6T6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с STM32L053R6T6 (тот же форм-фактор и посадочное место) — отличается по Flash Memory, Product Type, Architecture.

STMicroelectronics
Flash Memory: 32 KB (32K x 8 bits)
Product Type: 32-bit ultra-low-power microcontroller
Architecture: 32-bit Arm RISC
Сравнить с STM32L053R6T6 →
STMicroelectronics
Product Type: 32-bit ultra-low-power microcontroller
Architecture: ARM 32-bit
Сравнить с STM32L053R6T6 →

STM32L053R8T6TR

✅ Прямая замена
📦 64-LQFP (10 x 10 mm)
Uses a larger Flash configuration than the 32 KB STM32L053R6T6 while retaining the STM32L053 family, 32 MHz Cortex-M0+ core, and 64-LQFP footprint.

📋 Справочный аналог (нет в каталоге)

STM32L073RBT6TR

✅ Прямая замена
📦 64-LQFP (10 x 10 mm)
Provides a larger memory configuration than STM32L053R6T6 while retaining the STM32L0 Cortex-M0+ family and 64-LQFP footprint; peripheral functionality requires validation.

📋 Справочный аналог (нет в каталоге)

STM32L052R6T6

✅ Прямая замена ⚠️ Характеристики не проверены
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
STMicroelectronics · 32-bit ultra-low-power microcontroller · Arm Cortex-M0+ · ARM 32-bit · 32 MHz · 32 KB (32K x 8) · 8 KB · 2 KB

Уточнить цену

Открыть даташит →

STM32L051R6T6

✅ Прямая замена ⚠️ Характеристики не проверены
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
32-bit ultra-low-power microcontroller · Arm Cortex-M0+ RISC · 32 MHz · 32 KB (32K x 8 bits) · 2.5 V or 3.3 V · 32-bit Arm RISC

Уточнить цену

Открыть даташит →

STM32L071R6T6

✅ Прямая замена ⚠️ Характеристики не проверены
📦 64-LQFP (10 x 10 mm)
Retains the 32 MHz Cortex-M0+ architecture and 64-LQFP footprint but provides a different STM32L0 feature and memory configuration from STM32L053R6T6.

📋 Справочный аналог (нет в каталоге)

STM32L053R6T6 Максимальные параметры и электрические характеристики

Product Type 32-bit ultra-low-power ARM Cortex-M0+ microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB (32K x 8)
RAM 8 KB
Operating Voltage Range 1.65 V to 3.6 V
Nominal Supply 2.5 V / 3.3 V
CPU Architecture ARM Cortex-M0+
Instruction Width 32 bit
USB Interface USB 2.0 crystal-less
Корпус 64-LQFP (10 x 10 mm)
Тип монтажа Surface Mount
Статус RoHS Compliant
Статус жизненного цикла Active

Руководство по цоколевке STM32L053R6T6 в корпусе 64-lqfp (10 x 10 mm)

Цоколевка для STM32L053R6T6 (корпус 64-lqfp (10 x 10 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 64-lqfp (10 x 10 mm) для STM32L053R6T6

Нет подробных данных о распиновке для STM32L053R6T6.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

STM32L053R6T6 подходит для 6 применениеs: USB-Connected Sensor Node, Portable Medical Monitor, Industrial Control Module, USB Data Logger, Compact Human-Machine Interface, Battery-Operated Accessory.

🧩

USB-Connected Sensor Node

The STM32L053R6T6 fits a compact USB sensor node because its 32 MHz ARM Cortex-M0+ core can acquire and process data while USB 2.0 crystal-less connectivity handles enumeration and data transfer. The 32 KB Flash and 8 KB RAM provide space for embedded firmware, USB descriptors, and control logic. Its 1.65 V to 3.6 V operating range also allows the MCU to share a compact supply with low-voltage sensors. Place USB routing away from sensitive analog paths and follow the manufacturer's reference configuration for decoupling and impedance control.

💊

Portable Medical Monitor

The STM32L053R6T6 is appropriate for a portable monitoring unit that must combine low-power control, USB communications, and modest local data processing. Its ultra-low-power STM32L0 architecture supports battery-operated operation, while the Cortex-M0+ core handles sensor polling, filtering, status handling, and user-interface updates. USB 2.0 crystal-less connectivity can simplify synchronization with a host computer. For medical equipment, validate the exact device qualification, isolation strategy, leakage limits, alarm behavior, and applicable regulatory requirements independently of the MCU selection.

🏭

Industrial Control Module

The STM32L053R6T6 can serve as the central controller in a small industrial module that coordinates digital inputs, outputs, communications, and local diagnostics. Its 32 MHz Cortex-M0+ core provides deterministic handling of control logic, while the 64-LQFP package offers more connection options than smaller packages. The 1.65 V to 3.6 V supply range supports integration with low-voltage industrial peripherals. Use isolated interfaces where required, maintain defined failure states, and validate EMC and environmental performance for the enclosure and installation environment.

🖥️

USB Data Logger

The STM32L053R6T6 is well suited to a USB data logger because it combines a compact 32-bit control core with 32 KB of Flash, 8 KB of RAM, and crystal-less USB 2.0. Firmware can collect samples, buffer records, maintain timestamps, and expose data through a USB device interface. The 64-LQFP package provides sufficient pins for status indicators, storage interfaces, and sensor inputs. Select external nonvolatile storage when retention exceeds the internal memory, and account for USB suspend behavior and logging throughput during firmware planning.

📺

Compact Human-Machine Interface

The STM32L053R6T6 can control a compact human-machine interface with buttons, LEDs, a small display, and USB connectivity. The 32 MHz Cortex-M0+ core is capable of handling screen updates, input debouncing, status indication, and USB communication, while the 64-pin LQFP exposes a useful selection of I/O for display and control peripherals. Its low-voltage operation supports efficient portable designs. Validate display timing, contrast, ESD requirements, and connector protection against the specific module vendor's electrical recommendations.

📱

Battery-Operated Accessory

The STM32L053R6T6 fits a battery-operated accessory that needs a low-power controller and optional USB charging or configuration connectivity. Its ultra-low-power STM32L0 architecture, 1.65 V minimum operating voltage, and crystal-less USB 2.0 support can reduce component count in compact designs. The MCU can manage button input, status LEDs, low-power sensing, and USB enumeration without a separate host controller. Validate the USB charging path independently, and confirm sleep-mode current and wake-up behavior on the complete assembled board.

Сводка рекомендуемых товаров

STM32L053R8T6TR Same-footprint STM32L053 upgrade with a different Flash capacity Используется в: USB-Connected Sensor Node, Portable Medical Monitor, USB Data Logger, Compact Human-Machine Interface STM32L073RBT6TR Related STM32L0 64-pin MCU option with a different memory configuration Используется в: USB-Connected Sensor Node, Portable Medical Monitor, USB Data Logger STM32L052R6T6 STMicroelectronics Используется в: Industrial Control Module, Compact Human-Machine Interface STM32L071R6T6 Related STM32L0 controller for feature-set evaluation Используется в: Industrial Control Module, Battery-Operated Accessory STM32L051R6T6 STMicroelectronics Используется в: Battery-Operated Accessory
What are the key specifications of STM32L053R6T6 that engineers should know?
The STM32L053R6T6 is an ultra-low-power 32-bit microcontroller with a 32 MHz ARM Cortex-M0+ core, 32 KB of Flash, 8 KB of RAM, USB 2.0 crystal-less connectivity, and a 1.65 V to 3.6 V operating range. According to the manufacturer product page and product listings, it is packaged in a 64-LQFP measuring 10 x 10 mm. These parameters make it appropriate for low-power USB instruments, sensor nodes, compact controllers, and connected accessories.
What is the operating voltage of STM32L053R6T6?
The STM32L053R6T6 operates from 1.65 V to 3.6 V. Manufacturer and distributor product information also identifies 2.5 V and 3.3 V as nominal supply arrangements. Use the exact minimum and maximum limits when designing the regulator, level shifters, decoupling network, and USB interface. Verify startup, clock accuracy, and peripheral performance across the complete intended temperature and supply range before releasing the PCB.
What is the processor and memory configuration of STM32L053R6T6?
The STM32L053R6T6 uses a 32-bit ARM Cortex-M0+ processor operating at up to 32 MHz and includes 32 KB of Flash organized as 32K x 8 together with 8 KB of RAM. According to the manufacturer product page and component listings, this configuration is intended for low-power embedded control with USB connectivity. Firmware size, RAM allocation, bootloader behavior, and peripheral requirements should be checked against the intended application.
Does STM32L053R6T6 support USB without an external crystal?
Yes, the STM32L053R6T6 incorporates USB 2.0 crystal-less connectivity. The manufacturer describes the family as combining universal serial bus functionality with crystal-less operation. This can reduce clock-tree complexity in USB accessories and compact embedded systems. The board still requires correct supply, decoupling, data-line routing, and the interface components specified by the manufacturer for the intended USB device or host design.
Where can I download the STM32L053R6T6 datasheet PDF?
The official STM32L053R6 product page provides access to the manufacturer datasheet, pin definitions, electrical characteristics, package drawings, and peripheral documentation. Use the STMicroelectronics product link listed on this page for the current documentation. A third-party STM32L053R6T6 datasheet PDF is also listed among the sources on this page, but the manufacturer document should remain the controlling reference for design and qualification.
Where can I find the STM32L053R6T6 pinout?
The STM32L053R6T6 pinout is documented in the manufacturer package and pinout drawings for the 64-LQFP device. The component uses a 64-pin LQFP package measuring 10 x 10 mm, so the physical footprint and pin numbering must match that package exactly. Assign tracks only from the current manufacturer pin-definition tables, especially for USB, supply, ground, reset, clock, and boot-related pins.
What can replace the STM32L053R6T6 on an existing PCB?
The closest identified replacement is STM32L053R8T6TR, which shares the 64-LQFP footprint and Cortex-M0+ architecture but changes the Flash capacity, so it requires an exact package and pin assignment review before substitution. STM32L073RBT6TR is another same-family candidate identified for replacement consideration, although its larger memory configuration and peripheral differences must be checked. Use the manufacturer comparison documents and validate the complete firmware before replacing STM32L053R6T6.
Is STM32L053R8T6 a drop-in replacement for STM32L053R6T6?
STM32L053R8T6 can be a footprint-compatible upgrade candidate for STM32L053R6T6 because both use the STM32L0 family, ARM Cortex-M0+ architecture, and 64-pin LQFP format. It is not an exact functional substitute because the R8 variant provides a different Flash capacity from the 32 KB device. Confirm pin assignments, startup behavior, firmware image size, memory map, and supply requirements before using it as a drop-in replacement.
What is the best STMicroelectronics equivalent for STM32L053R6T6?
STM32L053R8T6TR is the closest same-manufacturer candidate identified for the STM32L053R6T6 because it retains the STM32L0 series, Cortex-M0+ core, and 64-LQFP package while offering a different Flash capacity. It is best treated as an upgrade path for a board already designed around the same footprint, not as an automatic replacement. Firmware, bootloader, peripheral, and pin-level validation remain essential.
When should I choose STM32L053R6T6 instead of STM32L052R6T6?
Choose STM32L053R6T6 when the design requires USB 2.0 crystal-less connectivity or the broader feature set associated with the STM32L053 device family. STM32L052R6T6 is a related STM32L0 option, but feature equivalence must be confirmed against the manufacturer comparison documentation before substitution. The selection should be driven by required interfaces, memory, clock architecture, firmware support, and qualification rather than package size alone.
Is STM32L053R6T6 suitable for low-power sensor and USB devices?
Yes, the STM32L053R6T6 fits low-power sensor and USB devices because it combines an ultra-low-power STM32L0 architecture with a 32 MHz Cortex-M0+ core, 32 KB of Flash, 8 KB of RAM, and crystal-less USB 2.0. Its 1.65 V to 3.6 V range supports compact supply designs. Actual battery life depends on the selected sleep modes, peripheral activity, USB duty cycle, sensor load, and board-level leakage.
How do STM32L053R6T6 and STM32L053R8T6 differ?
STM32L053R6T6 and STM32L053R8T6 belong to the same STM32L053 family and share the ARM Cortex-M0+ architecture and 64-pin LQFP package. Their principal device-code distinction is the R6 versus R8 memory configuration, with the R6 providing 32 KB of Flash while the R8 provides a larger configuration. Confirm the exact memory map and every peripheral assignment in the manufacturer documentation before treating the R8 as a drop-in upgrade.
Where can I buy STM32L053R6T6 online?
Use the Request a Quote form on this page to request STM32L053R6T6 availability, current lead time, and order details. The part is listed as active, but quote confirmation is the appropriate method for determining the current commercial terms and stock allocation for your quantity. Specify the required tray, tape-and-reel, or other shipping configuration when submitting the request.
What is the price of STM32L053R6T6?
The current commercial price for STM32L053R6T6 is determined by quantity, availability, and requested delivery configuration. Submit the quantity and packaging requirements through the Request a Quote form on this page for a current response. Pricing and inventory can change independently of technical specifications, so a written quote is more reliable than a static product-page price for production planning.
What is the lead time and stock status of STM32L053R6T6?
The STM32L053R6T6 is identified as an active product, but current stock and lead time should be confirmed for the exact order quantity and packaging format. Use the Request a Quote form on this page and include your requested delivery date and shipment quantity. The manufacturer status indicates ongoing product support, while allocation and lead time remain subject to market and manufacturing conditions.
Is STM32L053R6T6 compliant with RoHS and suitable for automotive designs?
The STM32L053R6T6 is identified as RoHS compliant. Its automotive qualification status is not stated in the available product information, so it should not be treated as AEC-Q100 qualified without checking the exact ordering code and manufacturer declaration. Industrial and commercial applications can use the part subject to normal environmental qualification, while automotive designs require documented automotive-grade ordering options and supporting requirements.

Справочные инженерные данные для STM32L053R6T6 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose STM32L053R6T6 when the design needs USB 2.0 crystal-less connectivity, a 32 MHz ARM Cortex-M0+ core, 32 KB of Flash, 8 KB of RAM, and a 64-LQFP footprint. Select STM32L053R8T6TR when the same STM32L053 family and package are useful but additional Flash capacity is required. Consider STM32L073RBT6TR for a related STM32L0 design requiring a larger memory configuration, after checking its peripheral set and firmware implications. Use STM32L052R6T6 or STM32L051R6T6 only when USB is unnecessary and their lower feature sets meet the application requirements. Every candidate requires board-level and firmware validation because package equivalence alone does not establish electrical, peripheral, or timing equivalence.

Сравнение с аналогами

Параметр Этот товар STM32L053R8T6TR STM32L073RBT6TR STM32L052R6T6 STM32L051R6T6 STM32L071R6T6
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount

Ключевые отличия

  • Crystal-less USB 2.0 connectivity in a 32 MHz low-power MCU (против STM32L052R6T6)
  • Exact 32 KB Flash configuration for cost-sensitive firmware budgets (против STM32L053R8T6TR)
  • 64-LQFP package provides a broad connection set (против STM32L073RBT6TR)
  • Native USB connectivity distinguishes the STM32L053 feature set (против STM32L051R6T6)

Заметки по проектированию

Route USB D+ and D- as a controlled-impedance differential pair on the shortest practical path between the STM32L053R6T6 and connector. Keep the pair over a continuous ground reference, avoid stubs and test-point branches, and place required USB routing components close to their relevant pins. Apply the impedance and clearance values required by the selected USB classification and manufacturing process.

Design the 1.65 V to 3.6 V supply rail for both low-noise analog behavior and USB transceiver requirements. Place the manufacturer's recommended bulk and high-frequency decoupling capacitors near the corresponding supply and ground pins, with short, low-inductance connections. Verify startup behavior across the complete voltage range and confirm that USB signaling remains within its specified limits under load and bus idle conditions.

Do not treat a same-package STM32L0 device as an automatic substitute. The STM32L053R8T6TR and STM32L073RBT6TR provide different memory configurations, while STM32L052R6T6 and STM32L051R6T6 do not provide the same USB feature set. Compare every pin, peripheral mapping, interrupt vector, bootloader behavior, clock requirement, and package marking before approving a replacement.

Although the STM32L053R6T6 is designed for low-power operation, the switching loss of the core and USB activity increases with clock frequency and duty cycle. Use the manufacturer power-consumption data when estimating battery life, and measure sleep current on the assembled design because leakage from regulators, pull resistors, LEDs, sensors, and USB protection devices may dominate standby consumption.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

RoHS compliance is stated in the manufacturer and distributor product information. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

STM32L053R6T6 STM32L053R6T6 datasheet STM32L053R6T6 datasheet pdf STM32L053R6T6 pinout STM32L053R6T6 equivalent STM32L053R6T6 replacement STM32L053R6T6 price STM32L053R6T6 stock STM32L053R6T6 USB application circuit STM32L053R6T6 vs STM32L053R8T6 STM32L053R6 LQFP-64 pinout STMicroelectronics STM32L053R6T6 STM32L053R6T6 32MHz 32KB STM32L053R6T6 1.65V 3.6V

Связанные компоненты & термины

STMicroelectronics STM32L053R6T6 STM32L053R8T6TR STM32L073RBT6TR STM32L052R6T6 STM32L051R6T6 STM32L071R6T6 ARM Cortex-M0+ STM32L0 32-bit microcontroller embedded microcontroller RISC processor USB 2.0 crystal-less USB Flash memory RAM 64-LQFP LQFP package family surface mount 1.65 V to 3.6 V 32 MHz RoHS low-power USB device sensor node
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ