Интегральные схемы

DSPIC33EV256GM003-I/M5

DSPIC33EV256GM003-I/M5 - 16-bit 70 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EV256GM003-I/M5 is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 256KB (85.5K x 24) ECC Flash, 16KB RAM, and a 5V operating supply, housed in a 36-pin UQFN (5x5 mm) package with exposed pad. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller (MCU). Within the power management hierarchy, the dsPIC33EV family sits in Microchip's 16-bit dsPIC33E line, positioned above general-purpose PIC16/PIC18 MCUs and optimized for closed-loop control loops and harsh-environment sensing. Key features include a 5V-tolerant design rated for harsh environments, six motor control PWM channels (6 MC PWM), three integrated operational amplifiers, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-domain measurements, and SENT protocol support for automotive sensor interfaces. ECC Flash provides single-bit error correction for functional-safety-oriented designs, which is why DigiKey classifies the part under Functional Safety (FuSa) microcontrollers. Architecturally, the device executes the dsPIC33E 16-bit pipeline at up to 70 MIPS, with DSP multiply-accumulate (MAC) instructions and 4 DMA channels enabling efficient filtering, FOC motor control, and sensor-fusion workloads without CPU saturation. On-chip op amps can close current-sense loops internally, reducing external BOM count in motor drives. Typical applications include brushless DC and PMSM motor control in appliances, automotive sensors and touch/control units, industrial power conversion, and noise/vibration-tolerant embedded control in harsh environments. Design consideration: the 5V core supply simplifies noise immunity in electrically harsh automotive and appliance environments compared to 3.3V-only MCUs, but verify 5V peripheral signal levels against connected logic. This page synthesizes distributor pricing, same-footprint alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM003T-I/M5

DSPIC33EV256GM003T-I/M5 - 5V 70 MIPS 256KB DSC | Microchip

The Microchip Technology DSPIC33EV256GM003T-I/M5 is a 16-bit digital signal controller (DSC) with a 5V, 70 MIPS dsPIC33E core, 256KB (85.5K x 24) ECC Flash program memory and 16KB RAM, housed in a 36-pin UQFN (5x5 mm) surface-mount package. A digital signal controller combines the compute architecture of a digital signal processor - single-cycle MAC, barrel shifter, hardware division support, DSP instruction set - with the peripheral integration and deterministic interrupt structure of a microcontroller. Within the power-management hierarchy, the dsPIC33EV family sits above basic MCUs and targets embedded control loops that also require signal processing, such as motor control, power conversion, and sensor fusion in harsh electrical environments. Key differentiating features include the native 5V operating supply (simplifying designs that interface directly with automotive and industrial 5V sensors), error-correcting code (ECC) on Flash for functional-safety oriented designs, six motor-control PWM channels, three integrated operational amplifiers, a Charge Time Measurement Unit (CTMU) for capacitive touch and precision timing, and a SENT peripheral for automotive sensor networks. Architecturally, the dsPIC33EV core executes up to 70 MIPS at 3.3V-5V, with four DMA channels and seven timers offloading data movement and scheduling from the CPU. The 60 MHz internal clock system (per distributor listings) supports PLL multiplication from internal or external sources, and the peripheral ecosystem supports CAN, UART, SPI, and I2C communication. Typical applications include brushless DC and PMSM motor drives, automotive body and comfort electronics, appliance motor and heater control, and industrial power supplies - all environments where 5V noise immunity and DSP-grade math are valuable. Design consideration: the native 5V rail simplifies board-level ESD and noise margins, but verify peripheral current budgets and thermal dissipation at maximum MIPS in the 5x5 mm UQFN package. This page synthesizes distributor listings, drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet. Pricing shown is as of 2026-09-26.

Запрос цены Контакты

DSPIC33EV256GM004-E/ML

DSPIC33EV256GM004-E/ML - 16-Bit 5V DSC 256KB Flash | Microchip

The Microchip DSPIC33EV256GM004-E/ML is a 16-bit, 5V digital signal controller (DSC) featuring 256KB of ECC Flash, 16KB of RAM, and a 60 MHz dsPIC DSC core, housed in a 44-pin QFN (8x8 mm) package with an extended operating temperature grade of -40C to +125C. A digital signal controller combines the computational architecture of a microcontroller with the math-processing capability of a DSP engine. In the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs: it executes deterministic real-time control loops (such as field-oriented motor control) while also handling general firmware tasks. The dsPIC33EV family belongs to Microchip's 16-bit dsPIC33 product line, positioned for 5V-tolerant, harsh-environment designs. Key features of this part include a 5V-tolerant supply rail (removing the need for external level shifting in 12V/24V industrial systems), 256KB of ECC-protected Flash for functional-safety-oriented designs, six motor-control PWM channels, four integrated operational amplifiers, a CTMU (Charge Time Measurement Unit) for capacitive touch and time measurement, and a SENT peripheral for automotive sensor interfaces. Architecturally, the device runs the dsPIC33EV 16-bit core with DSP multiply-accumulate instructions, delivering up to 70 MIPS class performance across the family (60 MHz CPU clock for this variant). The on-chip op amps offload external analog front ends in current-sense paths, while ECC Flash mitigates single-bit faults in noisy electromechanical environments. Typical applications include brushless DC and PMSM motor drives in appliances, automotive body and powertrain subsystems using SENT, industrial power supplies and inverters, and electric tool controls where 5V noise immunity matters. Design consideration: because the -E suffix extends the junction temperature rating, verify your PCB copper pour and theta-JA calculations at 125C ambient, and use the internal op amps with careful analog ground partitioning to preserve signal integrity. This page synthesizes distributor availability data, same-footprint alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM004-E/P8

DSPIC33EV256GM004-E/P8 - 16-bit 5V DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EV256GM004-E/P8 is a 16-bit 5V digital signal controller (DSC) with 256KB of ECC Flash, 4KB of RAM, a 60 MHz DSC core delivering up to 70 MIPS, 6 motor-control PWM channels, 3 on-chip op amps, CTMU, and SENT peripherals, housed in a 48-pin TQFP (7x7 mm) package. A digital signal controller combines the compute power of a DSP with the peripheral set and ease of use of a microcontroller, sitting in the hierarchy: DSC -> 16-bit microcontroller -> embedded processor. The dsPIC33EV family from Microchip is purpose-built for 5V industrial and automotive environments where a 3.3V MCU would require level shifting and where noise, vibration, and voltage transients are routine. Key features include 256KB (85.5K x 24) of ECC-protected Flash that detects and corrects single-bit memory errors for functional-safety designs, a 5V-tolerant core rated for harsh electrical environments, three integrated operational amplifiers that reduce BOM cost in current-sense front ends, and dedicated motor-control PWM with complementary outputs and dead-time control. The Charge Time Measurement Unit (CTMU) supports capacitive touch and precise time measurement, while the SENT peripheral targets automotive sensor interfaces. The -E temperature grade operates from -40C to +125C ambient, and the device is AEC-Q100 qualified for automotive applications. DigiKey also lists the dsPIC33EV family as Functional Safety (FuSa) supported, easing ISO 26262 and IEC 61508 design flows. Development is supported by Microchip MPLAB X IDE and the XC16 compiler, with ICSP programming via any PGEC/PGED pin pair. Typical applications include BLDC and PMSM motor control in appliances and power tools, automotive body and sensor modules using SENT, industrial power supplies with digital loop control, and capacitive-touch user interfaces leveraging the CTMU. Design consideration: at 60 MHz the core draws meaningful current, so budget the VCAP pin's stabilizing capacitor per the datasheet and decouple all VDD/AVDD pairs close to the pins. This page synthesizes distributor listings, drop-in alternatives within the same 48-TQFP footprint, and practical design notes not consolidated in the manufacturer datasheet. Pricing shown is as of 2026-09-26.

Запрос цены Контакты

DSPIC33EV256GM004-E/PT

DSPIC33EV256GM004-E/PT - 16-bit 5V 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EV256GM004-E/PT is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS dsPIC DSC core performance with 256 KB of ECC Flash program memory and 16 KB of RAM, housed in a 44-pin TQFP (PT) package rated for -40C to +125C operation. A digital signal controller combines the compute architecture of a microcontroller with DSP-engine features such as single-cycle MAC, hardware divide, and DSP instruction support, occupying the middle of the hierarchy between MCUs and dedicated DSPs within power-management and embedded control ICs. The dsPIC33EV family extends this concept with a 5V-tolerant core, making it well suited to harsh electrical environments where 3.3V devices require level shifting. Key features include 256 KB of ECC-protected Flash for functional-safety-oriented designs, up to 70 MIPS execution from the 16-bit dsPIC33E core, multiple motor-control PWM outputs, four on-chip operational amplifiers, SENT and CAN 2.0B interfaces, and a Charge Time Measurement Unit (CTMU) for capacitive touch and time-domain measurements. Technically, the device uses a modified Harvard architecture with a multiple internal bus system, four DMA channels, and seven timers. Integrated op amps offload external signal-conditioning stages in current-sense and sensor front ends, reducing BOM cost and board area in automotive and industrial nodes. Typical applications include BLDC and PMSM motor control in appliances, automotive sensor and touch-control units operating in vibration- and noise-rich environments, and digitally controlled power supplies. Design consideration: the extended-temperature (-E) grade permits -40C to +125C ambient operation, but verify Flash retention and timing derating across the full range per the family data sheet DS70005144H. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM004-I/ML

DSPIC33EV256GM004-I/ML - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV256GM004-I/ML is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS from a 256KB (85.5K x 24) ECC Flash and 16KB RAM, housed in a 44-pin QFN (8x8 mm) exposed-pad package rated from -40C to +85C. A digital signal controller combines the computational core of a digital signal processor (DSP) with the peripheral set and control architecture of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the dsPIC33EV family sits in the class of 16-bit DSCs optimized for real-time control, where deterministic interrupt latency and hardware math acceleration matter more than general-purpose throughput. Key features include the 5V-tolerant dsPIC DSC core operating from 4.5V to 5.5V, ECC-protected Flash for functional-safety designs, advanced PWM peripherals with dead-time control, SENT and CAN/FD-class communication interfaces, and integrated op amps on select family members. The industrial temperature grade (-40C to +85C) and noise immunity make the device suited to harsh electrical environments with vibration and switching transients. Technically, the dsPIC33EV core runs a modified Harvard architecture with DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator) supporting single-cycle MAC operations. The 256KB ECC Flash stores 85.5K 24-bit instructions, and the 16KB SRAM supports demanding control loops and communication buffers. Self-programming and boot loader capability simplify field updates in end equipment. Typical applications include appliance motor control (compressors, fans, pumps), automotive body and sensor modules operating on 5V or 12V-derated rails, industrial power supplies, digital power conversion (PFC, LLC), and battery-charging systems where the enhanced PWM and ADC subsystems drive half-bridge and full-bridge stages directly. For design, budget decoupling carefully: the datasheet recommends low-ESR ceramic capacitors with resonance at 20 MHz or higher on VDD pins, and the 5V rail simplifies interfacing with legacy analog sensors compared with 3.3V-only MCUs, reducing level-shift circuitry. This page synthesizes distributor pricing, drop-in same-family alternatives, practical design notes, and commercial FAQs not consolidated in the manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM004-I/P8

DSPIC33EV256GM004-I/P8 - 16-bit 5V DSC, 256KB Flash, TQFP-48 | Microchip

The Microchip Technology DSPIC33EV256GM004-I/P8 is a 16-bit 5V digital signal controller (DSC) from the dsPIC33EV family, featuring 256KB of ECC Flash program memory, 32KB of RAM, and a dsPIC DSC core running at up to 70 MIPS (60 MHz peripheral clock), housed in a 48-pin TQFP (7x7 mm) package rated from -40C to +85C. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control architecture of a microcontroller. Within the power-management hierarchy of embedded systems, the dsPIC33EV sits in the DSC category of the broader 16-bit microcontroller and semiconductor taxonomy, targeting control loops that need both math capability and rugged I/O in harsh electrical environments. Key features include a 4.5V to 5.5V single supply - a major differentiator versus 3.3V MCUs in noisy industrial wiring environments - six motor-control PWM channels, three on-chip operational amplifiers, a Charge Time Measurement Unit (CTMU), a SENT peripheral for automotive sensor interfaces, and Peripheral Pin Select (PPS) for flexible pin mapping. Error-correcting code (ECC) on the Flash memory improves reliability in high-vibration and high-temperature applications. Architecturally, the device integrates four DMA channels, nine timers, and four input capture/output compare modules, allowing sensor decoding, PWM generation, and data movement without CPU intervention in many designs. The three op-amps can be used to condition current-shunt or resolver signals before internal ADC sampling, reducing external component count in motor-control and power-conversion designs. Typical applications include BLDC and PMSM motor control in appliances, switched-mode power supplies and digital power, automotive body and auxiliary modules using SENT, and industrial automation nodes exposed to harsh electrical noise. When designing with this part, provide adequate decoupling on AVDD/AVSS and use the VCAP pin correctly for the internal regulator; brown-out and watchdog settings should be verified against the 5V supply tolerance of 4.5V to 5.5V. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-26.

Запрос цены Контакты

DSPIC33EV256GM004T-I/P8

DSPIC33EV256GM004T-I/P8 - 16-bit 5V 70 MIPS DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EV256GM004T-I/P8 is a 16-bit, 5V digital signal controller (DSC) delivering 70 MIPS performance from a dsPIC33EV core, with 256KB of ECC-protected Flash program memory (85.5K x 24), 4KB of RAM, and integrated 6-channel motor-control PWM, three on-chip operational amplifiers, a Charge Time Measurement Unit (CTMU), and a SENT peripheral, housed in a 48-pin TQFP (7x7 mm) package. A digital signal controller combines the computational throughput of a DSP with the control peripherals, interrupt architecture, and ease of use of a microcontroller. Within the power management hierarchy, the dsPIC33EV family sits above basic MCUs in the digital control chain, executing closed-loop algorithms for motor control, power conversion, and digital filtering while directly interfacing with sensors and power stages. Key features include 5V-tolerant operation that removes the need for level shifting in industrial and automotive environments, ECC Flash that detects and corrects single-bit memory errors for functional safety (FuSa) designs, six motor-control PWM channels supporting complementary outputs with dead-time insertion, and three integrated op amps that reduce external component count in current-sense front ends. The dsPIC33E CPU core uses a modified Harvard architecture with a 16-bit data path and DSP engine supporting single-cycle MAC and 40-bit accumulators, enabling execution of control loops and filtering algorithms at up to 70 MIPS. Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals to physical pins, simplifying PCB layout optimization. Typical applications include Brushless DC (BLDC) and permanent-magnet synchronous motor control in appliances, automotive sensors and touch control units operating in vibration and noise, and industrial power conversion such as digital power supplies and PFC stages where the 5V I/O directly drives gate-drive circuitry. A key design consideration is power budgeting: at 70 MIPS, core current is highest at full speed, so designers should use the integrated Doze mode and clock switching to trade MIPS against power in battery-sensitive designs, and decouple all VDD pins with 0.1uF ceramics close to the package. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with all data verified as of 2026-09-26.

Запрос цены Контакты

DSPIC33EV256GM004T-I/PT

DSPIC33EV256GM004T-I/PT - 16-bit 70 MIPS 5V DSC 256KB | Microchip

The Microchip Technology DSPIC33EV256GM004T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS performance from a 5V core with 256 KB (85.5K x 24) of ECC Flash program memory and 16 KB of RAM, housed in a 44-pin TQFP (10 x 10 mm) surface-mount package supplied in tape-and-reel packaging. A digital signal controller combines the computational architecture of a microcontroller with DSP-capable instruction execution, sitting in the product hierarchy between a general-purpose MCU and a dedicated DSP. The dsPIC33EV family extends this concept with a 5V-tolerant core, making it uniquely suited to harsh electrical environments where 3.3V processors would require additional level-shifting and noise-margin engineering. Key features include the 5V operating range of 4.5V to 5.5V, single-cycle MAC and DSP instructions, 4 DMA channels, 7 timers, on-chip PWM modules with advanced motor-control capability, a SENT peripheral for automotive sensor interfaces, and integrated analog features including op amps as described in the 506-page manufacturer datasheet. The ECC Flash protects program memory integrity in electrically noisy conditions. Architecturally, the device uses a modified Harvard 16-bit CISC core with a barrel shifter and multiple internal buses, sustaining 70 MIPS at its maximum clock while retaining deterministic interrupt latency important for closed-loop control. Typical applications include appliance motor control, industrial drives and power conversion, and automotive sensor and touch-control units operating under noise and vibration. Design consideration: provide robust decoupling and respect the 4.5V minimum supply; the 5V domain simplifies interface to legacy automotive sensors but demands attention to PCB creepage on mixed-voltage boards. This page synthesizes distributor data, drop-in family alternatives, and design guidance beyond the raw manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM006-E/PT

DSPIC33EV256GM006-E/PT - 16-bit 5V DSC 256KB AEC-Q100 | Microchip

The Microchip Technology DSPIC33EV256GM006-E/PT is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS dsPIC DSC core performance, 256KB (85.5K x 24) of ECC Flash program memory, and 16KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. It is AEC-Q100 qualified and rated for -40C to +125C operation. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral integration and control-oriented instruction set of a microcontroller (MCU). In the power-management hierarchy, the dsPIC33EV family sits between general-purpose MCUs and dedicated DSPs, providing single-cycle MAC, DSP multiply-accumulate, and hardware divide while integrating motor-control peripherals on one die. Key differentiating features include the 5V-tolerant operating range that eliminates level-shifting in industrial 5V domains, Error Correction Code (ECC) Flash for functional safety designs, SENT peripherals for automotive sensor interfaces, on-chip operational amplifiers, and advanced motor-control PWM modules with dead-time insertion. The -E/PT ordering code confirms extended temperature grade (-40C to +125C) suitable for underhood and industrial environments. Architecturally, the device uses the dsPIC33E core with a 16-bit modified Harvard pipeline, hardware DSP engine, and DMA controller, allowing sensor filtering and field-oriented control loops to execute deterministically without CPU intervention on data transfers. Typical applications include automotive motor control (HVAC blowers, pumps), industrial drives and power supplies, appliance control boards, and safety-oriented sensor nodes using the SENT interface. The 5V rail tolerance and robust EMI immunity make it well suited to noisy environments. Design consideration: enable the PLL to reach the 70 MIPS ceiling, and budget the ECC Flash overhead when mapping bootloader regions. The 10x10 TQFP requires thermal relief via ground pour for high-PWM-load operation. This page synthesizes distributor pricing, drop-in family alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM006-I/MR

DSPIC33EV256GM006-I/MR - 16-bit 5V 70MIPS DSC 256KB Flash | Microchip

The Microchip DSPIC33EV256GM006-I/MR is a 16-bit 5V digital signal controller (DSC) delivering 70 MIPS performance with 256KB of ECC Flash program memory and 16KB of RAM, housed in a 64-pin VQFN (9x9 mm) package. It belongs to the dsPIC33EV GM family designed for robust, noise-tolerant operation in harsh environments. A digital signal controller combines the compute architecture of a microcontroller with DSP-capable instruction throughput, allowing deterministic control loops and math-intensive signal processing in a single chip. Within the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EV256GM006 sits above basic MCUs and below application processors, targeting real-time embedded control such as motor drives and power conversion. Key features include a 5V-tolerant dsPIC DSC core running at up to 70 MIPS, 256KB of error-correcting-code (ECC) Flash that improves reliability against single-bit memory faults, DSP engines for multiply-accumulate operations, and enhanced peripherals oriented toward safety-oriented motor control per the manufacturer family description. The industrial temperature grade (-40C to +85C) denoted by the -I suffix supports deployment in demanding factory and appliance conditions. Technically, the dsPIC33EV family emphasizes 5V direct operation, which removes the need for 3.3V translation in many industrial signal environments and improves noise margin. Advanced analog and timing peripherals, along with PWM resources described in the 16-bit 5V Digital Signal Controllers datasheet, make it suitable for closed-loop field-oriented motor control, power supplies, and sensor interfaces. This aligns with automotive and appliance designs where vibration and electrical noise are common. Typical applications include brushless DC and PMSM motor control in appliances, industrial drives and automation, and automotive control units where the family's noise immunity and ECC Flash are advantageous. When designing with this device, connect all required VDD and VSS pins and use any matched PGECx/PGEDx pair consistently for ICSP programming and debugging, as the device exposes multiple programming pin pairs. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

DSPIC33EV256GM006-I/PT

DSPIC33EV256GM006-I/PT - 5V 70MIPS 256KB DSC | Microchip

The Microchip Technology DSPIC33EV256GM006-I/PT is a 16-bit 5V digital signal controller (DSC) delivering 70 MIPS from its dsPIC33EV core, with 256KB of ECC Flash program memory and 16KB of RAM, housed in a 64-pin TQFP (10x10 mm) package rated from -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs in signal-processing capability, making it the natural choice for motor control, digital power conversion, and sensing applications that require fast interrupt handling and hardware math acceleration. Key features include single-supply operation from 4.5V to 5.5V, which allows direct connection to industrial 5V rails without level shifting, ECC Flash for functional-safety-oriented designs, and 53 general-purpose I/O pins with Peripheral Pin Select (PPS) for flexible pin mapping. The family data sheet also highlights integrated PWM, SENT, and on-chip op amps, plus I2C, SPI, IrDA, UART, and USART interfaces for connectivity. Architecturally, the dsPIC33EV core pairs a 16-bit modified Harvard pipeline with DSP multiply-accumulate instructions, enabling deterministic execution of control loops such as field-oriented motor control at tens of kilohertz. Hardware DSP and addressing modes offload filtering and transformation tasks that would otherwise consume CPU cycles on a standard MCU. Typical applications span appliance motor control (washing machines, compressors), industrial drives and power supplies, and automotive body or aux subsystems, environments where 5V noise immunity and harsh-temperature operation are decisive selection criteria. Design consideration: decouple all VDD/VSS pairs and plan the ICSP PGECx/PGEDx programming pin pairs early in layout, since any pair may be used but must remain paired. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM006T-I/PT

DSPIC33EV256GM006T-I/PT - 16-Bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV256GM006T-I/PT is a 16-bit digital signal controller (DSC) featuring a 5V-tolerant dsPIC33EV core running at 70 MIPS, 256KB (85.5K x 24) ECC Flash memory and 16KB RAM, housed in a 64-pin TQFP (10x10 mm) package. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control architecture of a microcontroller, sitting within the broader hierarchy of embedded processors (DSC -> microcontroller -> semiconductor IC). The dsPIC33EV family specifically targets harsh-environment operation where a true 5V I/O interface eliminates the need for level shifters between the controller and power electronics. Key features include the 5V 70 MIPS dsPIC DSC core with DSP engine (single-cycle MAC, 40-bit accumulator), on-chip ECC Flash for functional-safety (FuSa) designs, six motor-control PWM channels, four integrated operational amplifiers, and SENT peripheral support for automotive sensor interfaces. Technical depth: the 60 MHz internal clock feeds the pipelined 16-bit core, and the ECC Flash protects against single-bit memory faults, a prerequisite for ISO 26262-oriented and functional-safety motor-control platforms. The integrated op amps front-end current-sense shunts directly, reducing external component count in inverter and BLDC drive designs. Typical applications include safety motor control (washing machines, compressors, HVAC blowers), automotive body and powertrain auxiliary control, and industrial appliances operating in electrically noisy environments. Design consideration: the /PT TQFP-64 footprint requires attention to exposed lead pitch (0.5 mm) during PCB assembly, and the 5V rail must be well decoupled since DSP core switching currents at 70 MIPS generate significant transients. This page synthesizes distributor pricing, same-package alternatives, and practical design notes not found in the manufacturer datasheet. Pricing as of 2026-09-26.

Запрос цены Контакты

DSPIC33EV256GM102-E/SO

DSPIC33EV256GM102-E/SO - 16-bit 60 MIPS 256KB DSC | Microchip

The Microchip Technology DSPIC33EV256GM102-E/SO is a 16-bit digital signal controller (DSC) from the 5V dsPIC33EV family, delivering up to 60 MIPS performance with 256KB (85.5K x 24) ECC Flash and 16KB RAM in a 28-pin SOIC (7.50 mm width) package, rated from -40C to +125C. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral integration of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for control-loop tasks, providing single-cycle MAC and DSP instructions alongside standard control peripherals. The dsPIC33EV line is optimized for 5V industrial and automotive environments where 3.3V processors would require level shifting. Key features include 4.5V to 5.5V single-supply operation, CANbus connectivity for automotive and industrial networks, I2C, SPI and UART communication, AEC-Q100 qualification, and Functional Safety (FuSa) support. On-chip PWM, SENT, and op-amp peripherals, per the family datasheet, reduce external component count in motor-control and sensor-interface designs. The dsPIC33EV core executes an enhanced 16-bit instruction set with DSP engine support, and the ECC Flash protects program memory integrity - essential for safety-relevant applications. The 28-SOIC surface-mount package suits both wave-soldered and reflow production flows. Typical applications include automotive body and powertrain control modules, industrial motor drives and inverters, appliance control boards, and CAN-networked sensor nodes - environments with electrical noise, high transients, and wide temperature ranges where 5V noise immunity is a decisive advantage. When designing, budget the 16KB RAM carefully for DSP buffers and communication stacks, and use the external oscillator inputs for precision CAN timing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM102-E/SP

DSPIC33EV256GM102-E/SP - 5V 60MHz 256KB Flash DSC | Microchip

The Microchip Technology DSPIC33EV256GM102-E/SP is a 16-bit, 5V digital signal controller (DSC) delivering 60 MIPS at a 60 MHz core, with 256KB ECC Flash program memory (85.5K x 24) and 16KB RAM, housed in a 28-pin SPDIP through-hole package with an extended temperature range of -40C to +125C. A digital signal controller combines the computational architecture of a digital signal processor (multiply-accumulate, DSP instructions, dual operand fetch) with the peripheral set and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for control-loop tasks and below full DSPs for high-throughput signal processing, making it the natural choice for real-time closed-loop control such as field-oriented motor control, digital power conversion, and sensor signal conditioning in harsh 5V industrial environments. Key features include on-chip CAN 2.0B for automotive and industrial fieldbus networking, six motor-control PWM channels for inverter and BLDC/ACIM drive stages, integrated analog peripherals, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-based measurement, and a SENT (SAE J2716) interface for automotive sensor connectivity. The ECC Flash provides single-bit error correction, improving functional-safety posture in appliance, industrial, and automotive designs. Architecturally, the dsPIC33EV core runs a 5V-tolerant pipeline that tolerates noisy 24V industrial rails without level shifting, a major differentiator against 3.3V MCUs. Per the dsPIC33EVXXXGM00X/10X family data sheet (Microchip DS70005144H), the device supports in-circuit serial programming (ICSP) with multiple PGECx/PGEDx clock-data pairs and hardware debugging. Typical applications include appliance motor control (washers, fans, compressors), automotive body and comfort modules communicating over CAN, industrial power supplies, and harsh-environment sensor nodes using SENT or CTMU-based measurement. Design consideration: keep all VDD/VSS pairs decoupled with 0.1uF ceramics close to the pins and connect VCAP/VDDCORE as specified in the datasheet to ensure core regulator stability. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer data sheet.

Запрос цены Контакты

DSPIC33EV256GM102-E/SS

DSPIC33EV256GM102-E/SS - 16-bit 5V DSC 256KB | Microchip

The Microchip Technology DSPIC33EV256GM102-E/SS is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS from a 60 MHz dsPIC33 core with 256KB flash and 16KB RAM, housed in a 28-lead SSOP package with 0.65 mm pin pitch. It operates from a 4.5V to 5.5V supply across -40C to +125C and carries the E temperature-grade suffix for extended automotive and industrial environments. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33EV family sits between general-purpose 16-bit MCUs and dedicated DSPs, offering hardware multiply-accumulate (MAC) acceleration for control loops while integrating motor-control PWM, SENT, and op-amp peripherals on one chip. Key features include the 5V-tolerant core that eliminates a separate 3.3V regulator rail in many designs, four DMA channels that offload data movement from the CPU, and seven timers supporting complex PWM generation. On-chip analog integration (ADC interface and operational amplifiers) plus SENT and advanced PWM peripherals target sensor-heavy, noise-tolerant automotive nodes. Architecturally, the dsPIC33EV256GM102 uses a dual internal bus architecture with a pipelined 16-bit core, hardware DSP instruction support, and Peripheral Pin Select (PPS) allowing remapping of RPn pins to digital peripherals for flexible board routing. Low-power modes and an RTC/timer suite support always-on standby behavior in battery-backed or ignition-switched systems. Typical applications include automotive body and powertrain auxiliaries compliant with AEC-Q100 expectations, industrial motor drives and appliances where 5V sensors interface directly, and harsh-environment control nodes requiring extended temperature operation up to +125C junction conditions. Design consideration: because the core runs directly from 5V, verify brown-out and supply-rail sequencing during load dump or inductive kick events; a 0.1uF ceramic decoupling capacitor per VDD pin plus bulk capacitance near the device is recommended per the family data sheet (DS70005144H). This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

DSPIC33EV256GM102-I/MM

DSPIC33EV256GM102-I/MM - 16-bit 5V 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EV256GM102-I/MM is a 16-bit, 5V digital signal controller (DSC) delivering up to 70 MIPS from an enhanced dsPIC33EV core, with 256 KB of ECC Flash (85.5K x 24 instruction words), 16 KB of RAM, and a CAN 2.0B controller, housed in a 28-pin QFN-S (6x6 mm) surface-mount package with an industrial -40C to +125C temperature rating. A digital signal controller combines the computational power of a DSP with the peripheral set and ease of use of a microcontroller. In the embedded-systems hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs: it executes control loops and math-intensive algorithms (PID, Clarke/Park transforms) while integrating motor-control PWM, communication buses, and analog peripherals on a single die, making it a compact single-chip solution for real-time control. Key features include a 5V-tolerant operating range (4.5V to 5.5V) that lets the chip drive MOSFET gates and interface with 5V industrial sensors without level shifting, 256 KB of self-programming ECC Flash for functional-safety-oriented designs, four DMA channels that offload data movement from the CPU, and seven timers. On-chip peripherals include a CAN 2.0B module for automotive and industrial networks, multiple UART, SPI, and I2C ports, a 10/12-bit ADC, and motor-control PWM outputs with complementary modes and dead-time insertion. Architecturally, the dsPIC33EV core couples a 16-bit modified Harvard pipeline with DSP engine features: a 17-bit x 17-bit single-cycle hardware multiplier, 40-bit accumulator, barrel shifter, and dual operand fetch for efficient MAC loops. Dual PGECx/PGEDx pin pairs support In-Circuit Serial Programming (ICSP) and in-circuit debugging with standard Microchip tools such as ICD/PICkit-class programmers. Typical applications include BLDC/ACIM/PMSM motor control for appliances and industrial drives, automotive body and auxiliary modules requiring CAN connectivity, switched-mode power supplies, and sensor-heavy systems exposed to harsh 24V industrial environments where 5V noise immunity matters. Design tip: budget the VDD/VSS pair on pin 11/8 and the internal regulator capacitor pin per the datasheet layout guidance, and connect all PGECx/PGEDx pairs as matched pairs when wiring the programming header. This page synthesizes verified distributor data, drop-in same-package alternatives, and practical design notes not found on the manufacturer product page. Pricing shown is an estimate as of 2026-09-26; confirm current stock and price with your distributor before ordering.

Запрос цены Контакты

DSPIC33EV256GM102-I/SP

DSPIC33EV256GM102-I/SP - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV256GM102-I/SP is a 16-bit digital signal controller (DSC) from the 5V-robust dsPIC33EV family, delivering up to 70 MIPS DSP performance with 256 KB of ECC Flash program memory and 16 KB of RAM in a 28-pin SPDIP through-hole package rated for -40C to +85C operation. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the embedded hierarchy, the dsPIC33EV sits between general-purpose MCUs and dedicated DSPs, offering a DSP engine (barrel shifter, multiply-accumulate, modulo and bit-reversed addressing) while retaining Microchip's familiar peripheral ecosystem. The dsPIC33EV256GM102 is the top-memory member of the 28-pin GM10x subfamily. Key features include the 5V-tolerant dsPIC DSC core operating at up to 70 MIPS, 256 KB of Error-Correcting Code (ECC) Flash for functional-safety-oriented designs, four DMA channels that move data without CPU intervention, and seven timers. On-chip analog and mixed-signal peripherals include op amps, high-resolution PWM, and SENT support, targeting motor control and sensing nodes directly. The architecture pairs the DSP engine with flexible Peripheral Pin Select (PPS), letting engineers remap digital peripherals to available RPn pins - a significant advantage in 28-pin layouts where board routing is constrained. Integrated CAN makes the part directly suitable for in-vehicle and industrial fieldbus nodes. Typical applications span appliance motor control (BLDC/PMSM drives), automotive body and powertrain auxiliaries, industrial sensing with SENT-output sensors, power supplies and digital power conversion, and CAN-networked embedded nodes in harsh 5V environments. When designing with this device, budget for the DSP core supply requirements and use the ECC Flash status flags in your safety monitor loop; the 5V tolerance simplifies interfacing with legacy 5V sensors, eliminating level shifters. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Pricing shown is as of 2026-09-26.

Запрос цены Контакты

DSPIC33EV256GM102-I/SS

DSPIC33EV256GM102-I/SS - 16-Bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV256GM102-I/SS is a 16-bit, 5V digital signal controller (DSC) delivering up to 70 MIPS from its dsPIC33EV core, with 256 KB (85.5K x 24) of Flash program memory and 16 KB of SRAM, housed in a 28-pin SSOP surface-mount package rated from -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits above a basic MCU by adding DSP-class multiply-accumulate instructions, a barrel shifter, and DMA, while remaining a single-chip solution. Microchip positions the dsPIC33EV family specifically for 5V, high-noise environments where 3.3V controllers would require level shifting and additional protection. Key features include true 5V operation (4.5V to 5.5V supply range) for direct sensor interfacing and robustness in electrically noisy motor-drive cabinets, on-chip CAN 2.0B, LIN, and SENT communication peripherals for automotive and industrial networks, multiple high-resolution PWM channels for motor control and power conversion, and integrated analog including op amps and a 12-bit ADC. The device provides four DMA channels and seven timers for efficient data movement and timing. Architecturally, the dsPIC33EV core executes an optimized C compiler-friendly instruction set with DSP engine support at 70 MIPS, per the dsPIC33EVXXXGM00X/10X family data sheet (DS70005144H). Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals onto RPn pins, simplifying PCB routing. Flash self-programming supports field firmware updates, and low-power sleep and idle modes reduce standby consumption. Typical applications include Brushed/BLDC/PMSM motor control with sensorless algorithms, automotive sensing modules using SENT and LIN, battery chargers and digital power supplies exploiting the 5V PWM and analog front end, and appliance control boards where high noise immunity eliminates external level-shift circuitry. When designing with this device, budget the 5V rail carefully: at full 70 MIPS operation active current is significantly higher than sleep-mode current, so plan decoupling and power conversion accordingly, and use the MCLR pin with a proper pull-up for reliable in-circuit programming. This page synthesizes distributor pricing from DigiKey, Mouser, and LCSC, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference.

Запрос цены Контакты

DSPIC33EV256GM102T-I/SO

DSPIC33EV256GM102T-I/SO - 16-bit 70 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EV256GM102T-I/SO is a 16-bit digital signal controller (DSC) with a 5V, 70 MIPS dsPIC33E core, 256KB of ECC Flash and 16KB of RAM, housed in a 28-pin SOIC (SO) surface-mount package rated from -40C to +125C. A digital signal controller merges a microcontroller (MCU) with DSP-style math capability inside a single chip, sitting in the product hierarchy between general-purpose 16-bit MCUs and dedicated DSP processors. Within a typical embedded system, the DSC performs both real-time control loops and signal processing, making the family a power-management and control IC as well as a computation device. The dsPIC33EV subfamily is specifically engineered for harsh electrical environments, tolerating 5V operation with enhanced noise immunity. Key differentiating features include a 60 MHz (70 MIPS) core with DSP instruction extensions, single-cycle MAC and multiply operations, hardware error-correcting code (ECC) on the 256KB self-programming Flash for functional-safety designs, and six motor-control PWM channels. On-chip analog integration is unusually rich for this class: three operational amplifiers, a charge time measurement unit (CTMU), a 10-bit ADC, SENT peripheral support for automotive sensor interfaces, and a CAN 2.0B controller. Architecturally, the dsPIC33E core uses a modified Harvard pipeline with 16-bit wide instructions, two 40-bit accumulators, and hardware divide support, letting developers implement field-oriented motor control or digital power loops without external DSPs. The 5V tolerance simplifies direct interfacing with automotive sensors, industrial transducers, and power stages that still run legacy 5V rails. Typical applications include brushless DC and PMSM motor control in appliances, automotive body electronics and sensor nodes using SENT, industrial power supplies and solar micro-inverters, and battery-management systems. The PWM and op-amp integration reduces bill-of-materials cost in these designs. A key design consideration is the VCAP/VDDCORE pin: a low-ESR 10 uF capacitor must be placed close to this pin for core regulation stability, and the ECC Flash adds slight write-latency during erase cycles that affects in-field firmware update timing. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and application-specific design notes not consolidated in the manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM103-I/M5

DSPIC33EV256GM103-I/M5 - 5V 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EV256GM103-I/M5 is a 16-bit digital signal controller (DSC) with a 5V, 70 MIPS dsPIC33EV core, 256KB (85.5K x 24) ECC Flash and 16KB RAM, housed in a 36-pin UQFN (5x5 mm) package. A digital signal controller combines the computational power of a digital signal processor with the peripheral integration and control logic of a microcontroller. Within the embedded control hierarchy, the dsPIC33EV family sits alongside general-purpose MCUs but adds DSP multiply-accumulate hardware, making it a member of the broader class of mixed-signal embedded processors targeted at real-time control loops. Key features of this device include 5V operation for direct interfacing with industrial and automotive sensors, a 70 MIPS instruction throughput, ECC-protected Flash memory for functional-safety designs, and an integrated CAN 2.0B module for in-vehicle and industrial networking. The part is further equipped with 6 motor-control PWM channels, 3 on-chip operational amplifiers, a CTMU (Charge Time Measurement Unit) for touch/timing measurement, and SENT peripherals for automotive sensor interfaces. Technically, the dsPIC33EV core executes 16-bit instructions with DSP enhancements, and the device supports 4 DMA channels for efficient data movement without CPU intervention (per Microchip USA product data). The M5 package code denotes the 36-pin UQFN with exposed pad, which provides good thermal performance and low inductance for mixed-signal designs. Typical applications include motor control in appliances, CAN-based automotive body and powertrain nodes, industrial automation sensing, and power conversion systems, all environments where 5V noise immunity and DSP-grade math performance are required. A key design consideration is peripheral pin select (PPS): the RPn pins can be remapped to most digital peripherals, but PGECx/PGEDx pairs must be used as matched pairs for ICSP programming and debugging. This page synthesizes verified distributor data, drop-in alternatives within the dsPIC33EV family, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM103T-I/M5

DSPIC33EV256GM103T-I/M5 - 16-bit 70 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EV256GM103T-I/M5 is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance at 70 MHz with 256KB (85.5K x 24) of Flash program memory and 16KB (16K x 8) of RAM, housed in a 36-pin UQFN (5x5 mm) package with exposed pad. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripherals and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, offering multiply-accumulate DSP instructions for control loops such as motor control, digital power conversion, and sensor signal processing. Key features include a 5V-tolerant core operating from a 4.5V to 5.5V supply, which is a major advantage in harsh industrial and automotive environments where 3.3V devices require level shifting; 25 general-purpose I/O pins; Peripheral Pin Select (PPS) for flexible remapping of digital peripherals; and Functional Safety (FuSa) support per Microchip's product documentation. The dsPIC33EV core integrates DSP engine instructions, multiple DMA channels, and a seven-timer system, enabling tight control loops and efficient data movement without CPU overhead. The 256KB Flash supports self-programming for field updates, and the 16KB RAM accommodates control-loop state, communication buffers, and DSP working arrays. Typical applications include industrial motor control and drives, digital power supplies (PFC, LLC), automotive body and powertrain auxiliary modules, and appliance control boards where 5V noise immunity is valued. Design consideration: because this is a 5V device, verify that any connected 3.3V peripherals or sensors are 5V-tolerant, or add level shifters; the exposed pad of the UQFN-36 must be soldered to a grounded copper pour for thermal and signal-integrity performance. This page synthesizes distributor listings, drop-in alternatives from the same dsPIC33EV family, and practical design notes not consolidated in the manufacturer datasheet.

Запрос цены Контакты

DSPIC33EV256GM104-E/ML

DSPIC33EV256GM104-E/ML - 16-bit 60 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV256GM104-E/ML is a 16-bit 5V digital signal controller (DSC) delivering 60 MIPS core performance with 256KB (85.5K x 24) ECC Flash and 16KB RAM, housed in a 44-pin QFN (8x8 mm) exposed-pad package rated from -40C to +125C. A digital signal controller combines the computational core of a microcontroller with the mathematical acceleration of a digital signal processor in a single chip. Within the power management hierarchy of embedded systems, a DSC such as the dsPIC33EV sits between general-purpose MCUs and dedicated DSPs, offering deterministic control loops plus math-intensive signal processing. The dsPIC33EV family from Microchip targets harsh-environment 5V industrial, appliance, and automotive designs where 3.3V processors require level-shifting. Key features include an extended-temperature rating (-40C to +125C), 4.5V to 5.5V single-supply operation, an on-chip CAN 2.0B controller, six motor-control PWM channels, four integrated operational amplifiers, and a Charge Time Measurement Unit (CTMU) for capacitive touch and time-domain measurements. Hardware ECC on the 256KB Flash program memory protects against bit errors, supporting functional-safety (FuSa) development as flagged on distributor listings. Architecturally, the dsPIC DSC core pairs a 16-bit modified Harvard pipeline with DSP engine features including a barrel shifter, high-throughput multiply-accumulate, and four DMA channels that move data between peripherals and RAM without CPU intervention. The SENT peripheral supports the SAE J2716 single-wire automotive sensor protocol, and dual UART/SPI/I2C communication resources round out connectivity. Typical applications include automotive sensor and control units, BLDC/PMSM motor control drives, industrial automation nodes on CAN networks, and appliance power-stage supervision. The 5V rail tolerance and extended temperature range eliminate external level translators in noisy 24V systems with 5V logic domains. For design, place 0.1uF decoupling on every VDD pin and keep the exposed thermal pad soldered to a ground pour for thermal and EMI performance. The 60 MIPS rating corresponds to a 60 MHz instruction clock from an external or internal oscillator source. This page synthesizes verified distributor specifications, drop-in family alternatives, and application guidance not consolidated in the manufacturer datasheet, with pricing as of 2026-09-26.

Запрос цены Контакты

DSPIC33EV256GM104-E/P8

DSPIC33EV256GM104-E/P8 - 16-bit 5V DSC, 256KB Flash, CAN | Microchip

The Microchip Technology DSPIC33EV256GM104-E/P8 is a 16-bit 5V digital signal controller (DSC) with 256KB ECC Flash, 4KB RAM, and a 60 MHz core, housed in a 48-pin TQFP (7x7 mm) package with extended temperature operation (-40C to +125C). A digital signal controller combines the compute capability of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the dsPIC33EV family sits in the 16-bit MCU/DSC class, targeting real-time control loops where both math throughput and rugged I/O matter. The dsPIC33EV line is specifically built by Microchip for harsh environments such as appliances, industrial equipment, and automotive systems. Key features include 256KB of ECC-protected Flash (a major reliability benefit in high-vibration and high-noise environments), an on-chip CAN module for automotive and industrial networking, six motor-control PWM channels for inverter and motor drive designs, and three integrated operational amplifiers that reduce external component count in current-sense and analog front-end circuits. The CTMU (Charge Time Measurement Unit) supports capacitive touch and precise time measurement, while the SENT peripheral serves automotive sensor interfaces. Technically, the dsPIC33EV core executes DSP instructions with hardware multiply-accumulate, making it well suited for field-oriented control (FOC) of motors, digital power conversion, and sensor signal processing. The 5V-tolerant supply domain simplifies direct interfacing with automotive sensors and industrial logic without level shifting, a key differentiator versus 3.3V-only competitors. Typical applications include BLDC/PMSM motor control, on-board automotive chargers and DC-DC converters, industrial HVAC and appliance control boards, and SENT/CAN sensor nodes. Design consideration: take advantage of the three on-chip op amps for current shaping to cut BOM cost, but verify Flash ECC configuration and clock fail-safe settings early in development for safety-relevant designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

Подкатегории

Товары (39.000+)

DSPIC33EV256GM003-I/M5 - 16-bit 70 MIPS DSC 256KB Flash | Microchip

DSPIC33EV256GM003T-I/M5 - 5V 70 MIPS 256KB DSC | Microchip

DSPIC33EV256GM004-E/ML - 16-Bit 5V DSC 256KB Flash | Microchip

DSPIC33EV256GM004-E/P8 - 16-bit 5V DSC 256KB Flash | Microchip

DSPIC33EV256GM004-E/PT - 16-bit 5V 70 MIPS DSC | Microchip

DSPIC33EV256GM004-I/ML - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV256GM004-I/P8 - 16-bit 5V DSC, 256KB Flash, TQFP-48 | Microchip

DSPIC33EV256GM004T-I/P8 - 16-bit 5V 70 MIPS DSC, 256KB Flash | Microchip

DSPIC33EV256GM004T-I/PT - 16-bit 70 MIPS 5V DSC 256KB | Microchip

DSPIC33EV256GM006-E/PT - 16-bit 5V DSC 256KB AEC-Q100 | Microchip

DSPIC33EV256GM006-I/MR - 16-bit 5V 70MIPS DSC 256KB Flash | Microchip

DSPIC33EV256GM006-I/PT - 5V 70MIPS 256KB DSC | Microchip

DSPIC33EV256GM006T-I/PT - 16-Bit 70 MIPS 5V DSC | Microchip

DSPIC33EV256GM102-E/SO - 16-bit 60 MIPS 256KB DSC | Microchip

DSPIC33EV256GM102-E/SP - 5V 60MHz 256KB Flash DSC | Microchip

DSPIC33EV256GM102-E/SS - 16-bit 5V DSC 256KB | Microchip

DSPIC33EV256GM102-I/MM - 16-bit 5V 70 MIPS DSC | Microchip

DSPIC33EV256GM102-I/SP - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV256GM102-I/SS - 16-Bit 70 MIPS 5V DSC | Microchip

DSPIC33EV256GM102T-I/SO - 16-bit 70 MIPS DSC 256KB Flash | Microchip

DSPIC33EV256GM103-I/M5 - 5V 70 MIPS DSC | Microchip

DSPIC33EV256GM103T-I/M5 - 16-bit 70 MIPS DSC 256KB Flash | Microchip

DSPIC33EV256GM104-E/ML - 16-bit 60 MIPS 5V DSC | Microchip

DSPIC33EV256GM104-E/P8 - 16-bit 5V DSC, 256KB Flash, CAN | Microchip