Товары (44.000+)

INA128UG4 - Low-Power Instrumentation Amplifier | TI
INA128UG4

INA128UG4 - Low-Power Instrumentation Amplifier | TI

Texas Instruments INA128UG4 is a precision, low-power instrumentation amplifier with 130 dB CMRR, 700 uA quiescent current, and a 1.3 MHz gain-bandwidth product in an 8-pin SOIC package. It is designed for low-level differential measurements where common-mode rejection, low offset voltage, and low input noise are more important than high-bandwidth signal processing. The device operates from ±2.25 V to ±18 V and supports a typical dual-supply configuration of ±15 V. An instrumentation amplifier is a specialized analog amplifier that measures the voltage difference between two inputs while rejecting large signals common to both inputs. Its internal three-amplifier topology provides high input impedance, accurate differential gain, and flexible gain selection through an external gain-setting resistor. The INA128 belongs to the broader precision-amplifier hierarchy and is commonly used with resistive sensors, strain gauges, bridge transducers, and high-impedance analog front ends. The INA128UG4 combines 130 dB CMRR with approximately 10 uV input offset voltage and 8 nV/sqrt(Hz) input noise. Its 700 uA supply current supports battery-powered and portable measurement systems where amplifier power consumption directly affects operating time. A 1.3 MHz bandwidth enables useful signal bandwidth, while a typical slew rate of 4 V/us supports accurate response to changing differential inputs. An external resistor on the gain-setting pins provides the gain relationship used for sensor conditioning. The device uses a precision internal architecture that is effective in systems where unwanted common-mode voltage can be substantially larger than the differential signal of interest. Its low noise and high CMRR reduce errors in bridge-based measurements, while the SOIC-8 package simplifies assembly in conventional surface-mount designs. Operation from ±2.25 V to ±18 V allows use with dual low-voltage rails or higher-voltage analog supplies, subject to the absolute maximum ratings in the manufacturer datasheet. Typical applications include weighing systems, industrial pressure and flow measurement, biomedical instrumentation, current-shunt monitoring, and laboratory sensor interfaces. In a bridge circuit, the amplifier can reject supply variation and large common-mode voltage while preserving the small differential output generated by the sensing element. The 700 uA quiescent current is particularly useful in portable equipment where each milliamp of supply demand can materially shorten battery life. The principal design consideration is resistor selection for the gain-setting network. Use stable, low-temperature-coefficient resistors and place them close to the relevant device pins to minimize added noise and parasitic resistance. Confirm common-mode range, output swing, supply current, and input bias behavior against the operating conditions before committing to a high-gain configuration. This page combines manufacturer specifications, package and pin information, sourcing guidance, parameter comparisons, and practical circuit-design notes. It also distinguishes confirmed pin-compatible alternatives from options that require additional electrical validation before production substitution.

Запрос цены Контакты
INA129A - Precision Instrumentation Amplifier | Texas Instruments
INA129A

INA129A - Precision Instrumentation Amplifier | Texas Instruments

The Texas Instruments INA129A is a precision, low-power instrumentation amplifier packaged in an 8-pin SOIC. It offers excellent accuracy for general-purpose signal conditioning, with low offset voltage, low drift, low input bias current, high common-mode rejection, and input protection to ±40 V. Its versatile three-op-amp architecture supports externally set gains and current-feedback input circuitry that maintains wide bandwidth even at high gain, including 200 kHz at a gain of 100. An instrumentation amplifier is a specialized amplifier that amplifies the difference between two input signals while rejecting common-mode voltage and providing high input impedance. The INA129A belongs to the broader precision analog signal-conditioning hierarchy: instrumentation amplifier, differential amplifier, analog amplifier, and semiconductor. It is used where sensors, transducers, strain gauges, bridge circuits, and measurement front ends require accurate differential amplification with minimal disturbance to the source. The INA129 family is designed for low-power precision applications. A single external resistor sets the gain from 1 to 10,000, according to the manufacturer product information. The device provides a wide supply range of ±18 V, a minimum common-mode rejection of 120 dB, input bias current of 5 nA maximum, and input protection to ±40 V. Its current-feedback input stage is particularly useful in higher-gain designs because it preserves bandwidth better than a conventional voltage-feedback input arrangement. The INA129A can amplify low-level sensor signals in industrial measurement systems, bridge-based load cells, biomedical instrumentation, audio equipment, and data-acquisition systems. Its common-mode rejection helps suppress equal voltages appearing on both inputs, while high input impedance limits loading of the measured source. The ±40 V input protection provides additional robustness when connected to external wiring or larger transients, subject to the complete datasheet ratings and system design limits. When using INA129A, place the gain-setting resistor close to the appropriate gain pins and keep input and feedback traces short to reduce parasitic capacitance and noise pickup. Check supply decoupling, input common-mode range, output swing, and resistor tolerance before finalizing a design. Because the INA129A is a precision analog amplifier, grounding, shielding, clean references, and careful PCB layout can matter as much as nominal gain accuracy. This product page combines the verified INA129A electrical and physical details, manufacturer and distributor references, comparison parameters, and practical design guidance. The listed alternatives are limited to candidates supported by the supplied cross-reference data; package and pin compatibility should still be confirmed against the current manufacturer datasheet before substitution.

Запрос цены Контакты
INA129P - Precision Low-Power 8-Pin Instrumentation Amp | TI
INA129P

INA129P - Precision Low-Power 8-Pin Instrumentation Amp | TI

The Texas Instruments INA129P is a precision, low-power instrumentation amplifier with one amplifier circuit, 120 dB minimum common-mode rejection, 50 uV maximum offset voltage, and a 200 kHz bandwidth at gain 100, packaged in an 8-pin PDIP. It accepts signals within the low-noise, low-offset instrumentation-amplifier class and supports wide bipolar supply operation up to ±18 V. An instrumentation amplifier is a specialized analog amplifier that measures a small differential voltage while rejecting common-mode interference. Its internal three-op-amp architecture supports high input impedance and adjustable gain, making it useful when a sensor produces a low-level signal and the surrounding wiring introduces substantial common-mode voltage. The INA129P is therefore positioned between a general-purpose operational amplifier and a more specialized precision measurement amplifier. Key features include 50 uV maximum offset voltage, 0.5 uV/°C maximum offset drift, 5 nA maximum input bias current, and input protection to ±40 V. The single external gain-setting resistor provides gain adjustment from 1 through 10,000 according to the manufacturer family information, while current-feedback input circuitry maintains useful bandwidth at higher gain. The stated 200 kHz bandwidth at gain 100 makes the device suitable for sensor and instrumentation signal paths rather than only static measurement. The INA129P uses a low-power instrumentation-amplifier architecture intended for precision measurement systems. Its common-mode rejection helps suppress voltage common to both inputs, and the low offset and drift reduce measurement error in bridge, current, and industrial sensor applications. The ±18 V supply capability provides flexibility for dual-supply analog systems, while the 8-pin PDIP format supports through-hole assembly and prototyping. Typical uses include bridge and load-cell signal conditioning, industrial process measurement, biomedical instrumentation, current sensing, and precision test equipment. The ±40 V input protection specification is useful when the amplifier is positioned near sensor wiring, although system-level protection and operating conditions still require engineering review. The principal design consideration is ensuring that the external gain resistor, supply bypassing, input protection, and common-mode range are matched to the sensor. For a new design, verify the exact INA129P pinout and electrical limits against the current Texas Instruments datasheet before layout release. This page consolidates verified distributor snippets, manufacturer family information, package details, and application guidance, while distinguishing documented specifications from information that requires design-team verification.

Запрос цены Контакты
INA129PA - Precision Low-Power Instrumentation Amplifier | TI
INA129PA

INA129PA - Precision Low-Power Instrumentation Amplifier | TI

The Texas Instruments INA129PA is a precision, low-power instrumentation amplifier in an 8-pin plastic DIP package, with a maximum input offset voltage of 50 uV, maximum offset drift of 0.5 uV/degC, maximum input bias current of 5 nA, and minimum common-mode rejection of 120 dB. Its input stage tolerates voltages from -40 V to +40 V, while its supply range extends to plus or minus 18 V. These characteristics make it appropriate for precision signal conditioning where low offset, low drift, high common-mode rejection, and input protection are important. An instrumentation amplifier is a differential analog IC used to amplify the voltage difference between two inputs while rejecting signals common to both inputs. The INA129 belongs to the broader instrumentation-amplifier, amplifier-IC, and analog-semiconductor hierarchy. Its internal gain-setting arrangement supports precise amplification of small differential signals in sensor interfaces, industrial measurement systems, and laboratory equipment. The verified device features distinguish the INA129 from ordinary general-purpose operational amplifiers. A 50 uV maximum input offset voltage reduces the effect of input-referred mismatch, while the 0.5 uV/degC maximum drift limits offset variation with temperature. Maximum input bias current of 5 nA is especially relevant when the source impedance is high. Minimum CMRR of 120 dB suppresses common-mode interference, and the -40 V to +40 V input protection range helps the interface tolerate larger external voltages than the internal operating range. The INA129 supports a wide supply range of plus or minus 18 V. A wide operating range allows the amplifier to process signals within systems using higher-voltage rails while retaining the low-power characteristics highlighted for this device. Exact gain, bandwidth, quiescent-current, input-voltage, and output-voltage limits were not available in the supplied verified data and should be taken from the manufacturer datasheet before final design release. Typical uses include bridge-sensor interfaces, current-shunt measurement, precision data acquisition, industrial process monitoring, and low-level differential signal conditioning. For bridge or shunt circuits, the 120 dB minimum CMRR helps reject common-mode noise, while low offset voltage and drift reduce measurement error. The protected inputs may improve robustness when transients or nearby switching nodes can appear at the input terminals. Designers should verify the gain equation, external resistor value, permissible input and output swing, and supply-current limits against the current manufacturer datasheet. Input filtering, source-impedance balancing, grounding, and placement near the measured signal are also important because excessive imbalance can degrade CMRR and the low-offset performance expected from this precision device. This page combines verified manufacturer and distributor information with practical selection guidance, application analysis, pricing context, and verified drop-in alternatives. It distinguishes documented INA129PA characteristics from information that remains unavailable, helping engineers make a more reliable instrumentation-amplifier choice without inventing specifications.

Запрос цены Контакты
INA129PG4 Precision Instrumentation Amplifier | Texas Instruments
INA129PG4

INA129PG4 Precision Instrumentation Amplifier | Texas Instruments

The Texas Instruments INA129PG4 is a precision, low-power instrumentation amplifier rated for a 700 µA supply current, 1.3 MHz gain-bandwidth product, and 8-PDIP package. It provides a 120 dB minimum common-mode rejection ratio, a 50 µV maximum offset voltage, and a 5 nA maximum input bias current for accurate differential-signal conditioning. An instrumentation amplifier is a specialized amplifier category designed to amplify the difference between two input signals while rejecting common-mode voltage. The instrumentation-amplifier hierarchy includes differential amplifiers, analog signal-conditioning ICs, amplifiers, and semiconductor devices. Its three-op-amp architecture and current-feedback input stage make it suitable for sensors and measurement systems in which small differential signals are superimposed on a larger common-mode voltage. Key characteristics include 4 V/µs slew rate, low offset drift of 0.5 µV/5°C maximum, and input protection to +40 V. The wide supply range extends to +18 V, while the input architecture retains a bandwidth of 200 kHz at a gain of 100. These characteristics support precision bridge, current-shunt, and sensor-amplification circuits without requiring a high-power amplifier. The INA129PG4 uses a versatile three-op-amp architecture. A single external resistor establishes the gain, allowing the same device to serve multiple measurement ranges. Its current-feedback input circuitry is designed to preserve usable bandwidth at higher closed-loop gains. The combination of low supply current, low offset, high CMRR, and protected inputs makes it especially useful for compact, low-power measurement instruments. Typical applications include bridge-sensor signal conditioning, portable instrumentation, industrial process monitoring, medical measurement interfaces, and low-level differential-signal acquisition. Its protected inputs can simplify front-end design when the source may produce transient overvoltage, although the complete application must still satisfy the device's absolute maximum ratings. For a new PCB, use the manufacturer pin-description table to assign all eight DIP connections and place the gain resistor close to the gain-setting pin. Check supply voltage, common-mode input range, input impedance, and output swing at the intended gain before finalizing component values. This product page combines the manufacturer specifications, package details, replacement analysis, parameter comparisons, and practical design guidance to help engineers evaluate the INA129PG4 before committing a precision measurement circuit to production.

Запрос цены Контакты
INA129SHKJ - 8-Pin Precision Instrumentation Amplifier | TI
INA129SHKJ

INA129SHKJ - 8-Pin Precision Instrumentation Amplifier | TI

The Texas Instruments INA129SHKJ is a single-circuit, precision instrumentation amplifier in an 8-pin ceramic flat package (8-CFP). It supports an external-resistor gain range from 1 to 10,000, operates from wide dual supplies up to ±18 V, and provides input protection to ±40 V. Its nominal gain-bandwidth characteristic is 1.3 MHz, with a 4 V/µs slew rate. The device is designed for low-level differential measurements where common-mode rejection, low offset voltage, and controlled input bias current are important. An instrumentation amplifier is a specialized differential amplifier designed to amplify the difference between two input signals while rejecting common-mode voltage, supply variation, and other disturbances that appear equally at both inputs. Its typical hierarchy is instrumentation amplifier → differential amplifier → analog signal-conditioning IC → semiconductor. Unlike a general-purpose operational amplifier, an instrumentation amplifier commonly integrates input buffers, a differential gain stage, and feedback resistors in a high-precision package. The INA129SHKJ provides several characteristics suited to demanding measurement systems. Its gain is established with one external resistor, and its gain equation is compatible with the AD620, allowing familiar gain-selection calculations. The device is laser trimmed for low offset voltage, with a typical value of 25 µV, and its input bias current is listed as 50 nA typical. Typical common-mode rejection is 95 dB, while the manufacturer identifies 93 dB CMRR at gains of 100 or greater. Input protection extends to ±40 V for applications in which transient or fault voltages may appear at the measurement terminals. Electrically, the INA129 combines internal gain-setting elements with a single external resistor, making gain selection straightforward across a wide range. The 1.3 MHz gain-bandwidth figure supports operation across sensor instrumentation, bridge measurement, and industrial monitoring applications, although the usable bandwidth depends on the selected gain. The 4 V/µs slew rate provides adequate large-signal response for many low- and medium-frequency sensing systems. Low quiescent current and low input bias current also help reduce loading of high-impedance transducers. Typical uses include current shunt measurement, strain-gauge and resistance bridge excitation, precision sensor interfaces, industrial process monitoring, and high-voltage measurement systems where protected inputs are advantageous. The ceramic package and broad specified temperature range make the INA129SHKJ particularly relevant to harsh-environment instrumentation, including industrial, aerospace, and defense systems where long-term thermal stability and input robustness are essential. Designers should account for input and output common-mode limits, external resistor tolerance and temperature coefficient, input filtering, supply bypass capacitance, and PCB thermal performance. A single resistor sets the gain, but its tolerance directly affects gain accuracy. The protected inputs should still be analyzed for continuous overvoltage, because protection is not a substitute for correctly rating external circuitry. Reference-ground connections and exposed pad or ceramic-package thermal paths should follow the manufacturer's pin and layout guidance. This page combines package, electrical, pricing, sourcing, and lifecycle information with application guidance and engineering checks for the INA129SHKJ. It also highlights the distinction between exact package equivalence and merely similar instrumentation amplifiers, helping buyers evaluate replacement risk before committing to a board-level substitution.

Запрос цены Контакты
INA129SHKQ - ±18V Precision Instrumentation Amplifier | TI
INA129SHKQ

INA129SHKQ - ±18V Precision Instrumentation Amplifier | TI

The Texas Instruments INA129SHKQ is a precision, low-power instrumentation amplifier with a gain of 10 V/V, a 1.3 MHz gain-bandwidth product, and a 4 V/µs slew rate, packaged in an 8-pin ceramic SOIC. It operates from a wide ±18 V supply and provides a military temperature range of -55°C to 210°C for precision signal-chain applications requiring elevated-temperature operation. An instrumentation amplifier is a specialized differential-input amplifier optimized for measuring small signals superimposed on large common-mode voltages. Its internal gain-setting architecture, high input impedance, and common-mode rejection distinguish it from general-purpose operational amplifiers. The INA129 belongs to the instrumentation-amplifier hierarchy within signal-chain ICs and analog measurement systems, where it converts low-level sensor outputs into a robust differential signal suitable for analog-to-digital conversion. Key characteristics include 25 µV typical offset voltage, 50 nA typical input bias current, and 95 dB typical common-mode rejection. The gain equation is compatible with the AD620, with a single external resistor setting gain from 1 to 10000. Input protection extends to ±40 V, while the wide ±18 V supply range supports industrial, military, and high-voltage measurement systems. A low 2 mA typical quiescent current also limits power consumption in portable or distributed instrumentation. Internally, the INA129 combines a precision input stage, difference amplifier, gain-setting network, and laser-trimmed offset compensation. Its common-mode rejection of 93 dB at gains of 100 or higher helps suppress supply noise and unwanted common-mode signals. The 1.3 MHz bandwidth supports moderately fast measurements while the 4 V/µs slew rate preserves large-signal response through the output stage. Typical uses include bridge-transducer amplification, current-shunt measurement, precision pressure sensing, ECG instrumentation, and high-voltage sensor interfaces. The ceramic SOIC package supports controlled thermal and environmental performance where an extended -55°C to 210°C operating range is required. Applications requiring only industrial-temperature grades should evaluate lower-cost standard-package variants before releasing a production design. PCB design should use short differential input traces, solid grounding around the gain resistor, and decoupling close to the supply pins. Input filtering must preserve the sensor bandwidth while limiting high-frequency noise. Because the INA129SHKQ is a high-temperature military-grade option, designers should verify thermal margins, solder assembly constraints, sourcing requirements, and all operating conditions against the Texas Instruments INA129-HT documentation. This product overview combines the device function, electrical limits, environmental ratings, replacement considerations, and application-level guidance into a practical engineering reference for instrumentation-amplifier design.

Запрос цены Контакты
INA129SJD - Precision Low-Power Instrumentation Amplifier | TI
INA129SJD

INA129SJD - Precision Low-Power Instrumentation Amplifier | TI

The Texas Instruments INA129SJD is a precision, low-power instrumentation amplifier with a typical supply current of 700 µA, input protection across ±40 V, and a wide ±18 V supply range. The device is offered in an 8-pin CDIP package with a 0.300-inch, 7.62 mm lead spacing. Its instrumentation-amplifier architecture is intended for differential sensor signals where accurate gain, high common-mode rejection, and low input bias current are important. An instrumentation amplifier is a specialized amplifier category designed to amplify small differential signals while rejecting large common-mode voltages. INA129 belongs to the broader hierarchy of operational amplifiers, amplifier ICs, and analog signal-chain semiconductors. It is particularly useful when a sensor output is much smaller than the voltage referenced to ground and must be measured accurately in industrial, medical, or test equipment. Key characteristics include a typical input bias current of 50 nA, a typical common-mode rejection ratio of 95 dB, and a slew rate of 4 V/µs. The INA129-HT family uses a gain equation compatible with the AD620, making it appropriate for designs based on familiar INA129 or AD620 gain-setting networks. The input stage also supports operation where transient voltage appears at the measurement inputs, while low quiescent current helps limit power consumption in continuously energized equipment. The INA129SJD combines differential measurement capability with a low-power architecture suitable for battery-operated and space-constrained instruments. Its typical 700 µA supply current supports efficient operation when the amplifier remains active during long measurement intervals. Designers can use the external gain resistor to establish the required amplification while preserving the differential input arrangement and common-mode rejection characteristics. Typical uses include bridge-strip and RTD sensor interfaces, isolated industrial monitoring, medical instrumentation, battery-powered data acquisition, and precision laboratory measurement. The high input impedance associated with the 50 nA typical bias current reduces loading on high-impedance sources. In systems with substantial ground offsets, the 95 dB typical common-mode rejection helps preserve measurement integrity. When laying out the circuit, keep the input, feedback, and gain-resistor paths compact and electrically symmetric to minimize parasitic imbalance. Place input protection and filtering components only after checking their capacitance, leakage, and tolerance effects on input bias current and common-mode performance. Verify the power-supply arrangement against the ±18 V operating range and the ±40 V protected-input condition. This product overview combines the manufacturer specifications with package information, application guidance, and compatible same-family options for engineers evaluating instrumentation-amplifier selections. The comparison and design notes emphasize practical fit, package compatibility, and the trade-offs between precision, protection, power, and gain functionality.

Запрос цены Контакты
INA129U - ±18V Precision Instrumentation Amp | Texas Instruments
INA129U

INA129U - ±18V Precision Instrumentation Amp | Texas Instruments

The Texas Instruments INA129U is a precision, low-power instrumentation amplifier with a 1.3 MHz gain-bandwidth product, 120 dB minimum common-mode rejection, and an 8-pin SOIC package. It accepts single or dual supplies up to ±18 V and uses one external resistor to set gain from 1 through 10,000. Designed around a versatile three-op-amp architecture, the INA129U supports accurate differential measurement while preserving wide common-mode range and robust input protection. An instrumentation amplifier is a specialized amplifier category that measures the voltage difference between two inputs while rejecting signals common to both nodes. INA129U belongs to the hierarchy instrumentation amplifier, differential amplifier, analog signal-conditioning IC, and power-management-independent semiconductor. Its three-op-amp topology provides high input impedance, precise differential gain, and improved common-mode rejection compared with a simple difference amplifier. Key verified features include maximum offset voltage of 50 µV, maximum offset drift of 0.5 µV/°C, maximum input bias current of 5 nA, and differential input protection extending to ±40 V. The current-feedback input circuitry maintains useful bandwidth at higher closed-loop gains, including 200 kHz at a gain of 100. These characteristics make the device useful where small transducer outputs must be amplified accurately in the presence of a larger common-mode voltage. The INA129 gain equation uses a 49.4 kΩ external resistor to support drop-in replacement with comparable instrumentation amplifiers. Gain accuracy depends on that resistor and associated layout parasitics, so designers should follow the manufacturer gain-setting guidance and preserve a symmetric input path. Low bias current is especially valuable for high-impedance sensor sources, while high CMR suppresses supply and ground disturbances that appear equally on both inputs. Typical uses include bridge-transducer signal conditioning, isolated low-voltage sensing, current-shunt measurement, biomedical acquisition, industrial sensor interfaces, laboratory instrumentation, and portable diagnostic equipment. For these applications, the ±40 V protected inputs can reduce accidental overload risk, although external protection and supply limits still require validation. The principal design consideration is keeping both input paths symmetric and placing the gain resistor close to the device. Incorrect Kelvin routing or unequal input impedance can degrade CMR and offset performance. The 8-pin SOIC also makes PCB assembly straightforward, while exposed thermal behavior and supply noise still require normal analog-layout practices. This page consolidates verified manufacturer and distributor information, package details, purchasing context, applications, and replacement guidance. It also distinguishes explicitly supported drop-in candidates from parts that require engineering review, helping designers compare the INA129U with alternatives rather than treating them as automatic equivalents.

Запрос цены Контакты
INA129U/2K5 - Precision Low Power INA, SOIC-8 | Texas Instruments
INA129U/2K5

INA129U/2K5 - Precision Low Power INA, SOIC-8 | Texas Instruments

The Texas Instruments INA129U/2K5 is a precision, low-power instrumentation amplifier (INA) in an 8-pin SOIC surface-mount package, supplied on a 2,500-piece tape-and-reel. The INA129 family uses a classic three-op-amp topology with current-feedback input stages, delivering 50 µV maximum offset voltage, 0.5 µV/°C maximum drift, 5 nA maximum input bias current, and a minimum common-mode rejection ratio (CMRR) of 120 dB at G = 100. A single external resistor sets any gain from 1 V/V to 10,000 V/V. The /2K5 suffix indicates the SO-8 packaging option on a 2.5k reel per TI's ordering nomenclature. An instrumentation amplifier is a precision differential amplifier with very high input impedance on both inputs, a defined and stable gain set by one external resistor, and exceptionally high common-mode rejection. The INA belongs to the family of analog front-end ICs that sit between a sensor (bridge, thermocouple, biopotential electrode) and an ADC. The category hierarchy is: instrumentation amplifier -> differential amplifier -> operational amplifier -> analog IC -> semiconductor. The three-op-amp topology isolates the input signal from the gain-setting resistor network, allowing tiny differential signals (often microvolts) to be amplified cleanly in noisy industrial environments. Key features of the INA129U/2K5 include wideband operation up to 1.3 MHz (G = 1) with 200 kHz bandwidth even at G = 100, a 4 V/µs slew rate, ±2.25 V to ±18 V dual-supply operation (±2.25 V minimum; typically ±15 V in transducer systems), input protection to ±40 V, and a quiescent current of only 700 µA typical. The exposed SO-8 package simplifies reflow assembly on standard 8-pin SOIC land patterns identical to the INA128, AD620, and other pin-compatible INAs. The current-feedback input stage keeps bandwidth flat across the full gain range, an advantage over voltage-feedback INAs that lose bandwidth at high gain. The INA129's gain equation G = 1 + 49.4kΩ/RG matches the AD620, allowing direct drop-in migration from legacy designs. The combination of low noise, low drift, and high CMRR makes the INA129U/2K5 well-suited for strain-gauge bridges, weigh scales, thermocouple amplifiers, medical instrumentation (ECG/EEG front-ends), and industrial process-control analog inputs. Typical applications include weigh scales and load-cell signal conditioning, ECG and biomedical front-ends, thermocouple and RTD pre-amplification, and industrial 4-20 mA loop readouts. Place the gain-setting resistor close to pins 1 and 8, and use 0.1 µF ceramic bypass capacitors on both supply pins to preserve the 120 dB CMRR across frequency. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA

INA129UA - Precision Instrumentation Amplifier | Texas Instruments

The Texas Instruments INA129UA is a precision, low-power instrumentation amplifier with one amplifier circuit, 50 µV maximum input offset voltage, and an 8-pin SOIC package. It operates from single or dual supplies up to ±18 V, accepts protected input voltages up to ±40 V, and provides a minimum common-mode rejection ratio of 120 dB. An instrumentation amplifier is a differential amplifier optimized for measuring small signals embedded on larger common-mode voltages. Its signal-path hierarchy is instrumentation amplifier → differential amplifier → analog amplifier → semiconductor. Compared with a conventional difference amplifier, an instrumentation amplifier provides controlled input impedance and accurate differential gain while rejecting common-mode interference from sensors, industrial wiring, and power systems. Key features include maximum input offset drift of 0.5 µV/°C, maximum input bias current of 5 nA, and input-noise performance of 8 nV/√Hz. A single external resistor programs the closed-loop gain, while the three-op-amp architecture maintains common-mode rejection over a useful signal range. Current-feedback input circuitry supports wide bandwidth even at high gain, including 200 kHz at a gain of 100. The INA129UA combines precision offset and drift characteristics with low quiescent-current operation. Its current-feedback inputs are suited to sensing systems in which source impedance, sensor output level, and system noise must be balanced carefully. The ±40 V input protection rating adds robustness in industrial environments, although protected inputs do not remove the need for appropriate fault-current limiting and supply design. Typical uses include bridge-amplifier front ends, strain-gauge and pressure-transducer measurement, low-current sensing, medical instrumentation, industrial process control, and battery-powered sensor interfaces. The 8-pin SOIC package supports compact analog modules and standard surface-mount assembly, while the adjustable gain makes one device usable across several signal ranges when the external resistor and sensor-network requirements are properly matched. For a new design, check input and output common-mode limits, bandwidth at the selected gain, resistor tolerance, and the sensor source impedance before finalizing the layout. Place the gain-setting resistor close to the RG pin, keep input traces short and symmetric, and use a stable reference implementation when the measurement requires nonzero output offset correction. This product page combines the manufacturer’s device information, pin-level guidance, application analysis, and verified drop-in alternatives to support faster component selection and board-level engineering decisions.

Запрос цены Контакты
INA131AP - Precision G=100 Instrumentation Amp | Texas Instruments
INA131AP

INA131AP - Precision G=100 Instrumentation Amp | Texas Instruments

Texas Instruments INA131AP is a precision, fixed-gain instrumentation amplifier with a gain of 100, a 70 kHz bandwidth, a 106 dB common-mode rejection ratio, and a 125 µV maximum input offset voltage. The device is supplied in an 8-pin PDIP package and operates from ±2.25 V to ±18 V. Its 3-op-amp architecture supports accurate differential signal conditioning, including low-level sensor measurements where common-mode interference must be rejected. An instrumentation amplifier is a specialized analog amplifier optimized for amplifying the difference between two input signals while rejecting voltage common to both inputs. Within the signal-conditioning hierarchy, an instrumentation amplifier is a precision analog IC used for current sensing, bridge excitation, biomedical instrumentation, and industrial measurement. Its internal differential input and feedback arrangement generally provides better common-mode rejection and offset behavior than a conventional op-amp circuit configured for the same function. The INA131AP provides a fixed gain of 100, allowing small differential sensor outputs to be raised to a level suitable for an ADC without an external gain-setting network. Maximum input offset voltage is 125 µV, while input bias current is specified at no more than 2 nA. Input overvoltage protection extends to ±40 V, helping the amplifier tolerate transient voltage at sensor inputs. The listed operating range of ±2.25 V to ±18 V supports dual-supply operation across common industrial and instrumentation systems. Internally, the INA131 uses a three-op-amp instrumentation-amplifier architecture. This arrangement provides high input impedance, differential gain of 100, and strong rejection of common-mode signals. The listed 106 dB CMRR is particularly useful when the measured differential signal is much smaller than the voltage shared by both input terminals. A slew rate of 0.7 V/µs and bandwidth of 70 kHz define its response for low-frequency industrial, measurement, and control signals. Typical uses include precision current sensing, bridge-based pressure and strain measurement, low-level differential sensor interfaces, analog signal conditioning, and buffered measurement channels. The fixed gain also simplifies system calibration because engineers do not need to select or adjust an external precision gain resistor. The 8-pin PDIP package is particularly useful for prototypes, laboratory equipment, legacy industrial systems, and designs assembled through through-hole manufacturing processes. Designers should preserve the input common-mode range and supply headroom for the selected output voltage. Because the gain is fixed at 100, input signals must remain small enough to prevent saturation, while source impedance and sensor grounding can influence offset and bias-current error. The INA131AP is non-isolated and operates from a bipolar supply, so system power architecture, grounding, transient protection, and input filtering should be reviewed before deployment. This product page consolidates the verified distributor data, manufacturer resources, package information, procurement details, and engineering guidance for the INA131AP. It also distinguishes verified drop-in candidates from cross-reference search results, helping engineers evaluate PCB compatibility and device-level limitations rather than relying only on the “instrumentation amplifier” device category.

Запрос цены Контакты
INA131AP-1 - Precision Gain-100 Instrumentation Amplifier | TI
INA131AP-1

INA131AP-1 - Precision Gain-100 Instrumentation Amplifier | TI

The Texas Instruments INA131AP-1 is a precision instrumentation amplifier with a fixed gain of 100, low input offset voltage of 50 uV maximum, input bias current of 2 nA maximum, and common-mode rejection of 110 dB minimum, housed in an 8-pin PDIP package. It is designed to amplify low-level differential signals while rejecting common-mode interference. An instrumentation amplifier is a specialized amplifier that combines differential input handling, high input impedance, accurate gain setting, and strong common-mode rejection into one device. Within the signal-chain hierarchy, it belongs to the amplifier IC family and supports precision measurement, sensor conditioning, and industrial interface systems. Unlike a general-purpose operational amplifier, the INA131AP-1 provides a defined internal gain of 100 and is intended for applications where common-mode noise can overwhelm a small differential measurement. The INA131AP-1 offers 0.25 uV/°C maximum input offset voltage drift and input overvoltage protection to ±40 V. These characteristics make it suitable for low-level sensor outputs, bridge transducers, current-shunt measurements, and analog front ends where offset and drift affect measurement accuracy. Its 8-pin PDIP package also supports conventional through-hole assembly and prototype boards. The device uses a three-op-amp instrumentation-amplifier architecture with an internal gain of 100. This architecture provides differential inputs, high input impedance, and balanced amplification while limiting the effect of common-mode voltage. The maximum input bias current of 2 nA is especially relevant when measuring sources with high source impedance, while the 110 dB minimum common-mode rejection helps preserve signal integrity in noisy industrial environments. Typical uses include bridge-based pressure and load-cell interfaces, current-shunt monitoring in power systems, precision instrumentation, medical equipment, industrial sensor acquisition, and low-level analog signal conditioning. For a 10 mV differential input, the nominal gain of 100 produces an output of 1 V, allowing millivolt-level sensor signals to be measured with standard analog-to-converter input ranges. Design the input network to limit differential input voltage, maintain source impedance balance, and avoid excessive input bias-current errors. Because the gain is fixed internally, external gain resistors are unnecessary, but the input pins still require careful protection and layout. Check the complete common-mode and output-swing limits against the actual supply voltages rather than relying only on the ±18 V maximum supply rating. This page combines manufacturer specifications, practical application guidance, comparison parameters, and verified component links. It is designed to help engineers select the part, plan the analog front end, and identify candidate replacements without duplicating the complete manufacturer datasheet.

Запрос цены Контакты
INA131BP - G=100 Instrumentation Amplifier | Texas Instruments
INA131BP

INA131BP - G=100 Instrumentation Amplifier | Texas Instruments

The Texas Instruments INA131BP is a precision instrumentation amplifier with a fixed gain of 100, a 2.25 V to 18 V supply range, and an 8-pin PDIP package. It uses a three-amplifier architecture and combines laser-trimmed internal circuitry with a bandwidth of 70 kHz and a slew rate of 0.7 V/µs. These characteristics make it suitable for conditioning low-level differential sensor signals before measurement, conversion, or control. An instrumentation amplifier is a specialized amplifier that amplifies the voltage difference between two inputs while rejecting common-mode interference. Its internal topology belongs to the amplifier hierarchy: instrumentation amplifier, operational amplifier, analog signal-conditioning IC, and semiconductor. Unlike a conventional differential amplifier, this device is intended to provide accurate differential gain with minimal dependence on external resistor matching. The INA131BP provides a fixed gain of 100, simplifying circuit design because no external gain-setting network is required for normal operation. Its 70 kHz bandwidth supports signals from slow sensor measurements through moderate-bandwidth industrial and instrumentation signals. The 2.25 V to 18 V operating supply supports single-supply and dual-supply arrangements, while the listed maximum total supply voltage of 50 V provides additional headroom for suitable protection and biasing conditions. The three-op-amp design is a key technical feature because it performs differential input amplification, common-mode rejection, and level shifting in one integrated circuit. The laser-trimmed construction is intended to improve gain accuracy and reduce the need for calibration. Its 0.7 V/µs slew rate helps the output track input steps without excessive distortion, although bandwidth and slew-rate requirements should both be checked against the intended signal bandwidth. Typical uses include bridge-transducer signal conditioning, current-shunt measurement, industrial sensor interfaces, laboratory instrumentation, and analog-to-digital converter front ends. The fixed gain is particularly useful when a transducer already includes scaling and the system requires consistent amplification before sampling. The device can also participate in low-side current measurement when the shunt voltage remains within the amplifier's input and common-mode limits. Designers should verify the input common-mode range, output swing, offset voltage, bias current, noise, and supply-current limits in the INA131 datasheet before finalizing a board. Decoupling capacitors should be placed directly beside the supply pins, and the input and reference connections should be routed away from noisy switching nodes. Because the INA131BP uses a through-hole PDIP package, it is also convenient for prototypes, educational systems, and test equipment where socketed construction or hand assembly is useful. This page consolidates the confirmed electrical characteristics, package information, practical application guidance, and verified drop-in alternatives for the INA131BP. It is designed to help engineers compare the fixed-gain amplifier with other instrumentation-amplifier options while keeping PCB compatibility, supply range, gain, and bandwidth requirements in view.

Запрос цены Контакты
INA131BPG4 - G=100 Instrumentation Amplifier | Texas Instruments
INA131BPG4

INA131BPG4 - G=100 Instrumentation Amplifier | Texas Instruments

The Texas Instruments INA131BPG4 is a precision instrumentation amplifier with a fixed gain of 100, a three-op-amp internal architecture, single-ended output, and an 8-pin PDIP package. Its stated input offset voltage is 50 µV, its gain-bandwidth characteristic reaches 70 kHz, and its supply-voltage capability extends to ±18 V or 36 V total. An instrumentation amplifier is a specialized analog signal-conditioning IC designed to amplify the small differential voltage produced by sensors and measurement bridges. In the signal-chain hierarchy, it belongs to the amplifier IC family and supports precision measurement systems that require high input impedance, accurate differential sensing, and stable gain without complex external resistor networks. The INA131 integrates the gain-setting and differential-input functions into one device. Key characteristics include the fixed gain of 100, a 50 µV input offset voltage, 70 kHz bandwidth, and a single-ended output stage. The fixed-gain architecture simplifies circuit design by eliminating the external gain-setting resistor normally required with general-purpose instrumentation amplifiers. The 8-pin PDIP package also supports conventional through-hole assembly and prototype-board layouts. The three-op-amp architecture provides differential input handling and a stable internal gain arrangement. Its specified supply range of 2.25 V to 18 V permits operation from a single 2.25 V rail through higher single-supply levels, while the ±18 V capability covers dual-supply instrumentation systems. Because the bandwidth is specified at the fixed gain of 100, the device is most appropriate for sensor signals that do not require high closed-loop bandwidth. Typical uses include resistive bridge excitation, pressure-sensor interfaces, strain-gauge amplification, industrial current measurement, and laboratory instrumentation. In a bridge circuit, the small differential output of the sensor is amplified by a factor of 100 before conversion by an ADC. In a shunt-measurement system, the INA131 provides differential sensing while rejecting common-mode voltage present across the shunt. Designers should verify the complete input common-mode range, output swing, input bias current, supply-current behavior, and settling requirements at the intended operating voltage before finalizing the analog front end. Input filtering and source impedance must also be evaluated against the device's published AC and DC accuracy characteristics. This product page combines the verified ordering information, package details, electrical highlights, drop-in family alternatives, and practical application guidance for engineers evaluating the INA131BPG4 in precision measurement designs.

Запрос цены Контакты
INA132U - Low-Power Unity-Gain Diff Amp | TI | 8-SOIC
INA132U

INA132U - Low-Power Unity-Gain Diff Amp | TI | 8-SOIC

The Texas Instruments INA132U is a low-power, unity-gain difference amplifier consisting of a precision op amp with an on-chip precision resistor network, housed in an 8-pin SOIC package. It operates from a single supply of 2.7V to 36V (or dual ±1.35V to ±18V), draws only 75 µA quiescent current, and offers 300 kHz small-signal bandwidth with a 1 MHz unity-gain op-amp stage. A difference amplifier is an op-amp-based circuit that amplifies the voltage difference between two inputs while rejecting signals common to both (the common-mode voltage). It is a foundational building block in signal-chain electronics, classified under instrumentation amplifiers and differential interfaces. Within the broader taxonomy, the INA132U sits at: difference amplifier -> instrumentation amplifier -> operational amplifier -> amplifier IC -> analog semiconductor. On-chip laser-trimmed resistors set the gain at exactly unity (G = 1), so no external precision network is required, simplifying PCB layout and BOM cost in measurement and sensor-conditioning applications. Key features include 250 µV typical offset voltage, a 60 V/µs equivalent slew rate at the op-amp core, and a quiescent current of 160 µA maximum over temperature. The internal op-amp common-mode range extends to the negative supply rail, enabling true single-supply operation from ground-referenced or low-side-shifted signals. Excellent TCR (temperature coefficient of resistance) tracking of the thin-film resistors maintains both gain accuracy and common-mode rejection across the -40°C to +85°C industrial range. The architecture uses a precision bipolar input stage followed by a fixed-gain thin-film resistor network and a unity-gain output buffer. CMRR exceeds 80 dB at DC for matched input impedances, and the integrated resistor matching eliminates the gain error and trimming burden typically associated with discrete difference amplifiers built from precision 0.1% resistors and a four-op-amp instrumentation topology. Typical applications include bridge transducer signal conditioning (load cells, strain gauges), ground-loop elimination in long-cable runs, differential signal reception in industrial process control, ECG/biopotential front-ends, and audio balanced-line receivers. Designers also use the INA132U as a building block inside higher-order active filters and as a differential-to-single-ended converter for ADC inputs. When designing with this part, observe the absolute maximum supply of 36V (single) or ±18V (dual) and ensure input common-mode voltage stays within the input range of each input pin, not just the differential value. A 0.1 µF supply decoupling capacitor placed within 5 mm of the V+ pin is recommended. The integrated gain is fixed at 1, so external attenuation or pre-gain stages are needed when the source signal is smaller than the ADC full scale. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты
INA132U/2K5 - 2.5 Gain Differential Amplifier | Texas Instruments
INA132U/2K5

INA132U/2K5 - 2.5 Gain Differential Amplifier | Texas Instruments

The Texas Instruments INA132U/2K5 is a low-power, single-supply differential amplifier with a fixed gain of 2.5, a 2.7 V to 36 V operating range, and an 8-pin SOIC package. The device combines a precision operational amplifier with an integrated, laser-trimmed resistor network to measure small voltage differences accurately while rejecting large common-mode signals. A difference amplifier is an analog signal-conditioning circuit that subtracts one input voltage from another and amplifies the result. The INA132U/2K5 belongs to the instrumentation-amplifier and precision-differential-amplifier hierarchy, where accurate gain and common-mode rejection are essential for converting small sensor outputs into signals suitable for analog-to-digital converters, control systems, and measurement equipment. The integrated resistor network gives the /2K5 ordering option a fixed gain of 2.5, while laser trimming supports accurate gain and high common-mode rejection. The amplifier operates from a single 2.7 V to 36 V supply and can also be used with split supplies where the input and output voltages remain within the device's electrical limits. Its low-power design makes it suitable for battery-powered and industrial instrumentation systems. The INA132U/2K5 accepts input signals through differential IN+ and IN− terminals and provides the amplified difference at OUT. A reference terminal permits the output to be shifted relative to a chosen voltage when the application cannot use a ground-centered signal. The internal architecture simplifies PCB design by reducing the number of external precision resistors normally required for a discrete difference amplifier. Typical uses include bridge-transducer excitation and readout, precision current sensing, industrial process monitoring, battery-powered sensing, and low-level differential signal acquisition. Because the device has a fixed 2.5 gain, engineers should verify that the required signal gain, common-mode range, output swing, and supply voltage match before placing it in a new design. Layout quality directly affects differential-signal performance. Route the IN+ and IN− paths as a closely matched pair, keep the reference and output nodes away from switching-current paths, and use a low-noise supply arrangement with local bypass capacitors. Confirm input and output common-mode limits at the operating temperature and check the final gain tolerance against the system measurement budget. This page combines ordering information, technical limits, drop-in replacement analysis, comparison data, and application-specific design guidance. It is intended to help engineers identify whether the INA132U/2K5 provides the required gain, supply range, package, and replacement compatibility before committing a board layout.

Запрос цены Контакты
INA132UA - Low-Power Difference Amplifier | Texas Instruments
INA132UA

INA132UA - Low-Power Difference Amplifier | Texas Instruments

The Texas Instruments INA132UA is a low-power, unity-gain difference amplifier with a 500 uV input-referred offset, 300 kHz gain-bandwidth product, and low 160 uA quiescent current. Designed for precision differential measurement, the device combines a precision operational amplifier with a laser-trimmed internal resistor network. It is offered in an 8-pin SOIC package and supports single-supply operation up to 36 V or dual-supply operation up to ±18 V. A difference amplifier is a specialized operational-amplifier circuit that measures the voltage difference between two input nodes while rejecting voltage common to both inputs. Within the amplifier-IC hierarchy, the INA132UA belongs to the precision instrumentation-amplifier family, combining an operational amplifier, precision gain-setting resistors, and high common-mode rejection in one package. This integration reduces external component count while preserving accurate gain behavior across temperature. The principal features of the INA132UA include 90 dB common-mode rejection, ±0.075% maximum gain error, and 0.001% maximum nonlinearity. Its internal resistors are laser trimmed for accurate gain, and their temperature-coefficient tracking helps preserve gain accuracy and common-mode rejection over operating temperature. The low-power architecture operates from a single supply as high as 36 V, making it suitable for both compact battery-powered systems and higher-voltage industrial instrumentation. The INA132UA uses a unity-gain architecture, so the differential output is scaled 1:1 from the difference between its inputs. The internal precision resistor network establishes the gain relationship without an external gain-setting resistor. Its common-mode rejection is particularly important when a small sensor signal is superimposed on a larger reference or supply-derived voltage, because the amplifier attenuates the common component while retaining the differential measurement. Typical applications include bridge-sensor and transducer signal conditioning, current-shunt measurement, battery and power-system monitoring, industrial process-control instrumentation, and precision analog sensing. The device is also appropriate for low-side current sensing when the input common-mode voltage remains within the operating range. Its 8-pin SOIC footprint supports conventional surface-mount assembly. Designers should preserve the input common-mode and output-voltage limits, provide stable input and output bypassing, and verify that source impedances remain compatible with the amplifier's input and common-mode performance. The low quiescent current reduces supply demand, but input bias current and common-mode behavior still determine accuracy in high-impedance sensor circuits. The manufacturer pin-description table should be used when assigning PCB tracks and confirming polarity. This product record combines the device's manufacturer-defined characteristics with same-package replacement guidance, application-specific engineering context, and practical layout considerations. It is intended to help engineers identify whether the unity-gain INA132UA fits a differential-measurement design without confusing it with wider-gain or different-supply-range amplifier families.

Запрос цены Контакты
INA133U - 1.5MHz Precision Difference Amplifier | TI
INA133U

INA133U - 1.5MHz Precision Difference Amplifier | TI

The Texas Instruments INA133U is a 1.5 MHz, precision unity-gain difference amplifier with up to 450 µV offset, 0.95 mA typical power-supply current, and an 8-pin SOIC package. Designed for low-level differential measurement, it combines a precision operational amplifier with a laser-trimmed resistor network for accurate gain and common-mode rejection. The device is offered in the INA133U package configuration identified by DigiKey as an 8-SOIC differential amplifier. A difference amplifier is a specialized analog amplifier that amplifies the voltage difference between two inputs while rejecting signals common to both inputs. This function is useful when a sensor, transducer, or measurement node is exposed to large common-mode voltages and the desired information exists only as a small differential signal. In the broader hierarchy, the INA133U belongs to instrumentation and difference amplifiers, within operational amplifiers and analog signal-conditioning ICs. The INA133U combines 1.5 MHz bandwidth with low offset voltage and low power consumption. Its high-speed behavior makes it suitable for current-shunt monitoring, bridge excitation, differential sensing, and industrial signal-conditioning systems. The on-chip laser-trimmed resistors are designed to improve gain accuracy and common-mode rejection, while their temperature-coefficient tracking helps preserve performance across temperature changes. The precision architecture is important because it combines amplifier bandwidth with accurate differential gain. A difference amplifier can reject shared interference, but its usefulness still depends on common-mode voltage staying within the device operating limits and on the surrounding circuit presenting suitable impedance and filtering. Designers should verify the complete input, output, supply, and common-mode conditions from the manufacturer datasheet. Typical applications include high-side current measurement, differential voltage sensing, bridge-based sensor interfaces, amplifier-input protection networks, and industrial control systems. In a shunt monitor, the INA133U can amplify the voltage across a low-ohm resistor while reducing the effect of supply or ground disturbances. In bridge sensing, it helps convert a small differential sensor output while rejecting common-mode excitation voltage. The principal design trade-off is bandwidth versus precision and power. The 1.5 MHz bandwidth supports faster signal changes than a purely low-bandwidth precision amplifier, while the 0.95 mA power figure favors low-power systems. PCB layout should keep input traces short, use a solid ground reference, and provide stable supply bypassing. This page synthesizes the verified manufacturer and distributor information, practical design considerations, and carefully limited replacement guidance.

Запрос цены Контакты
INA133UA - 1.5 MHz Precision Difference Amplifier | Texas Instruments
INA133UA

INA133UA - 1.5 MHz Precision Difference Amplifier | Texas Instruments

Texas Instruments INA133UA is a precision difference amplifier with 1.5 MHz bandwidth, 450 uV maximum offset voltage, and 0.95 mA power consumption. The device is packaged in an 8-pin SOIC surface-mount package and is designed for high-speed signal-chain applications where a differential input must be amplified accurately. According to the Texas Instruments INA133 product information, the INA133 family uses a unity-gain configuration and provides high gain accuracy and common-mode rejection ratio. The verified product listing identifies the INA133UA as a differential amplifier in an 8-SOIC package, while the INA133UA/2K5 ordering variant is also listed in an 8-pin SOIC package. A difference amplifier is an operational-amplifier-based circuit that responds to the voltage difference between two input terminals rather than to either input voltage independently. This makes the INA133UA suitable for current-sense, bridge-sensor, instrumentation, and high-speed measurement circuits where common-mode voltage can be substantially larger than the wanted differential signal. The 1.5 MHz bandwidth provides a useful compromise between response speed and precision, while the specified 450 uV offset and 0.05% maximum gain error help establish the accuracy of the amplified result. The INA133UA operates with single or dual power supplies according to the manufacturer family information. Its 0.95 mA power consumption is suitable for compact, low-power signal-conditioning equipment when compared with general-purpose implementations that consume more current. The 8-pin SOIC package permits conventional surface-mount assembly and provides a straightforward footprint for designs that require one precision differential amplifier. Typical uses include bridge-based pressure and load sensing, current measurement in power-conversion systems, industrial instrumentation, and high-speed analog signal conditioning. In each case, the input common-mode range, supply voltage, output swing, gain-setting method, and required common-mode rejection must be checked against the complete manufacturer datasheet before implementation. Designers should pay particular attention to input filtering, resistor matching, supply bypassing, and the output reference connection. The INA133UA is not automatically interchangeable with every 8-pin amplifier because package compatibility alone does not guarantee electrical compatibility. Verify the exact pinout, supply ratings, common-mode limits, gain configuration, and stability requirements before releasing a PCB. This product page combines the verified Texas Instruments product description, distributor package information, price reference, and cross-reference results with practical selection guidance for engineers evaluating a drop-in replacement.

Запрос цены Контакты
INA133UG4 - 1.5MHz Precision Differential Amplifier | Texas Instruments
INA133UG4

INA133UG4 - 1.5MHz Precision Differential Amplifier | Texas Instruments

The Texas Instruments INA133UG4 is a single-circuit precision difference amplifier with a 1.5 MHz -3 dB bandwidth, 450 µV input offset voltage, 950 µA quiescent current, and an 8-SOIC package. Designed for instrumentation applications, it converts a differential input into a single-ended output while providing high common-mode rejection for signals embedded in larger voltage ranges. A precision difference amplifier is an amplifier subtype that subtracts two input voltages and amplifies the resulting differential signal. This measurement-focused category belongs to the hierarchy of instrumentation amplifiers, differential amplifiers, analog amplifiers, and semiconductor signal-conditioning ICs. Unlike a general-purpose operational amplifier configured with external resistors, the INA133 integrates matched internal resistors, reducing component count and improving resistance matching for bridge, shunt, and current-sense measurements. The INA133UG4 operates from 4.5 V to 36 V and supports output swings of approximately ±2.25 V to ±18 V, depending on supply voltage. Its 5 V/µs slew rate supports accurate reproduction of rapidly changing signals, while low power consumption of 0.95 mA suits battery-powered and portable instrumentation. The manufacturer identifies the device as a precision, low-power, high-performance difference amplifier. Internally, the INA133 combines four precision resistors with an operational-amplifier core to establish a fixed differential gain of 1. This architecture is useful when the desired output equals the difference between two input voltages, particularly for current measurement across a low-value shunt. Because it is a fixed-gain device, it avoids the gain-setting resistor network and feedback balance adjustments normally required by discrete difference-amplifier implementations. Typical uses include industrial current sensing, bridge-transducer excitation and readout, battery monitoring, laboratory measurement systems, and instrumentation interfaces that must reject large common-mode voltage. The wide 36 V maximum supply voltage also permits operation from protected industrial rails, although the selected output range must remain within the power-supply limits. The primary design consideration is common-mode range. Neither input should exceed the supply rails by more than the device permits, and the output must remain within its allowable swing. PCB layout should minimize differential-loop area, use a solid ground reference, and keep input and output return paths separated to reduce errors caused by parasitic resistance or ground gradients. This page combines manufacturer specifications, package information, application guidance, comparison parameters, and practical design notes to support faster component selection and implementation of the INA133UG4 in precision analog signal chains.

Запрос цены Контакты
INA134PA - 0dB Audio Differential Receiver | Texas Instruments
INA134PA

INA134PA - 0dB Audio Differential Receiver | Texas Instruments

The Texas Instruments INA134PA is a single 0dB audio differential line receiver with a fixed gain of 1V/V, low distortion of 0.0005% at 1kHz, and a high slew rate of 14V/µs. The device is packaged in an 8-pin PDIP package and operates across a wide ±18V supply range with a maximum quiescent current of 2.9mA. An audio differential line receiver is a specialized amplifier that accepts a balanced or unbalanced audio signal, rejects common-mode noise, and produces a single-ended output. The INA134 belongs to the broader amplifier IC hierarchy and is intended for professional and high-fidelity audio paths where low distortion, adequate slew rate, common-mode rejection, and output drive are more important than a small package or minimal power consumption. Key features include a 90dB common-mode rejection ratio, fixed unity gain, 0.0005% distortion at 1kHz, and a 14V/µs slew rate. The wide output-voltage swing and high output-drive capability allow the receiver to drive downstream circuitry without adding substantial distortion. A maximum quiescent current of 2.9mA also supports straightforward analog power-supply design where adequate headroom and grounding remain important. Internally, the INA134 combines high-performance operational amplifiers with on-chip precision resistors. The integrated resistor network establishes the fixed 1V/V gain and helps control gain-related errors without requiring an external matched resistor set. Its differential architecture is intended to suppress signal-correlated noise and interference that appears equally on both input lines. Typical uses include balanced professional audio inputs, stereo differential line receivers, mixer input stages, audio interface front ends, and instrumentation that receives low-level differential signals. The INA134PA is particularly appropriate when an through-hole package is preferred and a ±15V or ±18V analog supply is available. The primary design consideration is ensuring adequate supply headroom for signal peaks and output swing. Input and return paths should be routed as a balanced pair, with attention to grounding and source impedance. Decoupling close to the supply pins and short, symmetric signal traces help preserve the receiver’s low-noise and high-rejection performance. This page combines verified manufacturer specifications, distributor availability information, lifecycle guidance, and an engineering-oriented comparison of the INA134PA with relevant alternatives. It also identifies where verified drop-in data is limited so engineers can distinguish confirmed compatibility from generic or cross-package substitutions.

Запрос цены Контакты
INA134UA - Unity-Gain Audio Receiver | Texas Instruments
INA134UA

INA134UA - Unity-Gain Audio Receiver | Texas Instruments

The Texas Instruments INA134UA is a unity-gain differential audio line receiver with 0.0005% distortion at 1 kHz, a 14 V/µs slew rate, and 90 dB CMRR, housed in an 8-pin SOIC package. It uses on-chip precision resistors and high-performance operational amplifiers to convert balanced differential audio signals into a single-ended output. A differential line receiver is a special-purpose amplifier that rejects common-mode voltage and interference while amplifying the voltage difference between two signal inputs. In the amplifier hierarchy, the INA134UA is a differential receiver, then an audio amplifier, then an analog signal-conditioning IC. It is commonly used where a balanced source must feed an unbalanced input without introducing excessive noise, distortion, or ground-related errors. Key features include a fixed gain of 1 V/V, low distortion of 0.0005% at 1 kHz, a high slew rate of 14 V/µs, high CMRR of 90 dB, and maximum quiescent current of 2.9 mA. The wide supply range supports single-ended operation from 4 V to 18 V or dual supplies up to ±18 V. The manufacturer specifically identifies the device for high-performance audio applications. Technically, the INA134UA combines high-performance operational amplifiers with precision on-chip resistors in a fixed unity-gain configuration. Its differential input arrangement suppresses signal common to both inputs, while the fast slew rate supports dynamic audio waveforms. Wide output-voltage swing and strong output drive make the receiver useful between professional audio sources and downstream single-ended stages, although the exact output-drive and settling values must be confirmed in the manufacturer datasheet. Typical uses include professional audio consoles, balanced line inputs, mixer stages, studio preamplifier interfaces, broadcast equipment, and audio adapter boards. In these systems, the receiver can preserve a balanced source over a cable run and provide a clean single-ended signal for mixing or monitoring. The same features also suit instrumentation interfaces where cable pickup and ground-offset rejection are important. When designing around the INA134UA, verify input and output common-mode limits for the selected supply arrangement and confirm that downstream circuitry accepts a single-ended output. Keep input and output return paths short, use a stable reference ground for the source and receiver, and avoid placing high-current digital return paths beneath the audio input region. The 8-pin SOIC footprint also requires an appropriate thermal assessment if the output stage operates near its voltage limits. This product page consolidates verified manufacturer and distributor information, identifies genuine drop-in alternatives, and adds practical selection, layout, and signal-integrity guidance for engineers evaluating the INA134UA in audio and instrumentation systems.

Запрос цены Контакты
INA137PA - ±6dB Audio Differential Receiver | Texas Instruments
INA137PA

INA137PA - ±6dB Audio Differential Receiver | Texas Instruments

Texas Instruments INA137PA is a single-channel audio differential line receiver based on a high-performance operational amplifier and on-chip precision resistors. It supports fixed gains of 1/2 (-6 dB) and 2 (+6 dB), operates from dual ±18 V supplies, and is packaged in an 8-pin PDIP. The receiver is intended for balanced audio inputs, professional audio equipment, consumer audio systems, and other applications that require rejection of common-mode signals while preserving low distortion. An audio differential line receiver is a specialized analog amplifier that amplifies the voltage difference between two input terminals while suppressing a voltage common to both inputs. This function belongs to the hierarchy of difference amplifier, instrumentation amplifier, operational amplifier, and signal-conditioning IC. Balanced audio transmission reduces sensitivity to ground-potential differences and conducted interference, making a precision differential receiver an important interface between a source and downstream audio circuitry. The INA137PA provides low distortion of 0.0005% at 1 kHz, a high slew rate of 14 V/µs, and common-mode rejection of 90 dB. Its quiescent current is specified at no more than 2.9 mA. The operational-amplifier architecture and integrated precision resistors simplify the implementation of a balanced receiver while retaining the wide output swing and strong output-drive characteristics described for the INA137 family. The input and feedback resistors can be reversed to select either -6 dB or +6 dB gain, according to the manufacturer datasheet. This flexibility allows a designer to attenuate a high-level balanced source or amplify a lower-level source without changing the receiver package. A unity-gain implementation is not provided by the INA137 itself; the manufacturer identifies INA134 and INA2134 for applications requiring 0 dB gain. Typical uses include receiving balanced professional-audio mixer outputs, converting balanced sources to unbalanced downstream inputs, conditioning stereo channel signals in broadcast equipment, and rejecting ground-offset noise in installation audio. Exact bandwidth, input impedance, output impedance, and temperature limits must be confirmed from the manufacturer documentation for the final operating conditions. When laying out the circuit, keep the differential input traces short, matched, and away from switching nodes. Place input and output bypassing capacitors close to their associated supply and signal pins, and route output signals away from high-current switching paths. Verify output swing, load capability, and thermal conditions before driving the next stage. This page organizes the documented INA137PA characteristics into an engineer-oriented selection guide, application guidance, verified pin-compatible alternatives, and practical layout notes. It also distinguishes the fixed -6 dB and +6 dB configurations from unity-gain receiver choices, helping prevent a package-compatible substitution from introducing an unintended gain change.

Запрос цены Контакты