Texas Instruments

INA133UG4 - 1.5MHz Precision Differential Amplifier | Texas Instruments

Артикул: INA133UG4 ✓ Активен
150 µV minimum; 450 µV maximum Vdss 950 µA Id 8-SOIC (0.154 inch, 3.90 mm width) Package
MOQ: 1 |

INA133UG4 Обзор

The Texas Instruments INA133UG4 is a single-circuit precision difference amplifier with a 1.5 MHz -3 dB bandwidth, 450 µV input offset voltage, 950 µA quiescent current, and an 8-SOIC package. Designed for instrumentation applications, it converts a differential input into a single-ended output while providing high common-mode rejection for signals embedded in larger voltage ranges.

A precision difference amplifier is an amplifier subtype that subtracts two input voltages and amplifies the resulting differential signal. This measurement-focused category belongs to the hierarchy of instrumentation amplifiers, differential amplifiers, analog amplifiers, and semiconductor signal-conditioning ICs. Unlike a general-purpose operational amplifier configured with external resistors, the INA133 integrates matched internal resistors, reducing component count and improving resistance matching for bridge, shunt, and current-sense measurements.

The INA133UG4 operates from 4.5 V to 36 V and supports output swings of approximately ±2.25 V to ±18 V, depending on supply voltage. Its 5 V/µs slew rate supports accurate reproduction of rapidly changing signals, while low power consumption of 0.95 mA suits battery-powered and portable instrumentation. The manufacturer identifies the device as a precision, low-power, high-performance difference amplifier.

Internally, the INA133 combines four precision resistors with an operational-amplifier core to establish a fixed differential gain of 1. This architecture is useful when the desired output equals the difference between two input voltages, particularly for current measurement across a low-value shunt. Because it is a fixed-gain device, it avoids the gain-setting resistor network and feedback balance adjustments normally required by discrete difference-amplifier implementations.

Typical uses include industrial current sensing, bridge-transducer excitation and readout, battery monitoring, laboratory measurement systems, and instrumentation interfaces that must reject large common-mode voltage. The wide 36 V maximum supply voltage also permits operation from protected industrial rails, although the selected output range must remain within the power-supply limits.

The primary design consideration is common-mode range. Neither input should exceed the supply rails by more than the device permits, and the output must remain within its allowable swing. PCB layout should minimize differential-loop area, use a solid ground reference, and keep input and output return paths separated to reduce errors caused by parasitic resistance or ground gradients.

This page combines manufacturer specifications, package information, application guidance, comparison parameters, and practical design notes to support faster component selection and implementation of the INA133UG4 in precision analog signal chains.

Аналоги без доработки для INA133UG4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с INA133UG4 (тот же форм-фактор и посадочное место) — отличается по Package, Product Type, Operating Temperature Range, RoHS Status, Gain.

Texas Instruments
Package: 8-pin SOIC
Product Type: Low-power, unity-gain difference amplifier
Operating Temperature Range: -55°C to +125°C
Сравнить с INA133UG4 →
Texas Instruments
Package: 8-pin SOIC
Operating Temperature Range: -40 °C to +85 °C
RoHS Status: unknown
Сравнить с INA133UG4 →
Texas Instruments
Package: 8-pin SOIC, 3.9 mm width
Operating Temperature Range: -40 °C to +85 °C
RoHS Status: unknown
Сравнить с INA133UG4 →

INA133U

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 8-SOIC
Precision difference amplifier · Single amplifier · Unity gain · 1.5 MHz · 450 µV maximum · 5 µV/°C maximum · 0.95 mA typical

Уточнить цену

Открыть даташит →

INA133UA

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 8-SOIC
Precision difference amplifier · 1.5 MHz · 450 uV · 0.95 mA · 0.05% · ±5 uV/°C maximum · ±15 V · -40 °C to +85 °C

Уточнить цену

Открыть даташит →

INA132UA

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 8-SOIC
Low-power, unity-gain difference amplifier · 1 channel · 1 V/V (unity gain) · Up to 36 V · ±18 V · 160 uA · 300 kHz · 500 uV maximum

Уточнить цену

Открыть даташит →

INA132UG4

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-SOIC
Same 1 V/V gain and 8-SOIC footprint; INA133 has a 1.5 MHz bandwidth, while the INA132 bandwidth is approximately 1.3 MHz, a 13% reduction

📋 Справочный аналог (нет в каталоге)

INA133UG4 Максимальные параметры и электрические характеристики

Product Type Precision difference amplifier
Number of Circuits 1 circuit
-3 dB Bandwidth 1.5 MHz
Slew Rate 5 V/µs
Input Offset Voltage 150 µV minimum; 450 µV maximum
Ток покоя 950 µA
Supply Voltage Range 4.5 V to 36 V
Диапазон выходного напряжения ±2.25 V to ±18 V
Differential Gain 1 V/V
Корпус 8-SOIC (0.154 inch, 3.90 mm width)
Тип монтажа Surface mount
Статус RoHS Compliant

Руководство по цоколевке INA133UG4 в корпусе 8-soic (0.154 inch, 3.90 mm width)

Цоколевка для INA133UG4 (корпус 8-soic (0.154 inch, 3.90 mm width)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 8-soic (0.154 inch, 3.90 mm width) для INA133UG4

Нет подробных данных о распиновке для INA133UG4.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

INA133UG4 подходит для 6 применениеs: Industrial Shunt Current Sensing, Bridge Transducer Readout, Battery Pack Monitoring, Laboratory Instrumentation, Power Converter Feedback, Portable Sensor Interfaces.

⚡

Industrial Shunt Current Sensing

The INA133UG4 fits high-side and low-side shunt-current measurement because its fixed 1 V/V gain converts the differential voltage across a shunt into a single-ended output. Its 450 µV maximum input offset voltage limits the output error attributable to input offset, while the 1.5 MHz bandwidth and 5 V/µs slew rate support changing current waveforms. The 4.5 V to 36 V supply range accommodates industrial rails, but the shunt voltage must remain inside the permitted input common-mode range. Place the amplifier close to the shunt to minimize pickup from adjacent power stages.

🏭

Bridge Transducer Readout

For resistive-bridge measurement, the INA133UG4 provides a fixed 1 V/V differential gain and rejects common-mode excitation voltage before the signal reaches the next conversion stage. Its 450 µV maximum input offset and 1.5 MHz bandwidth are useful for medium-speed pressure, load, and position bridges. The 8-SOIC layout also supports compact analog boards. Input filtering should be balanced across both sides of the bridge, and the amplifier must remain within its specified common-mode range as the bridge output changes.

🔋

Battery Pack Monitoring

INA133UG4 is suitable for monitoring differential cell or pack voltages when the signal can be observed with a fixed 1 V/V gain. Its low 950 µA quiescent current helps limit continuous overhead in portable or energy-storage monitoring systems, while the 36 V maximum supply voltage accommodates higher-energy cells and protected rails. Its 5 V/µs slew rate also permits measurement of rapid transients. The monitoring architecture must keep the input common-mode voltage within the device limits and avoid placing the amplifier in a measurement path that exceeds its supply rating.

🔬

Laboratory Instrumentation

The INA133UG4 can condition differential sensor outputs in compact laboratory instruments where fixed gain, low offset, and fast settling are useful. Its 1.5 MHz bandwidth is sufficient for many pressure, force, strain, and general-purpose analog measurement channels, while the 5 V/µs slew rate limits distortion on larger output steps. The 8-SOIC package simplifies board-level assembly and allows direct replacement within the INA133 family. For best results, use a low-noise reference and ground plane, and verify the input filtering needed to suppress interference at the measured bandwidth.

🔋

Power Converter Feedback

INA133UG4 can monitor a differential feedback voltage in a power-conversion or distributed-power system when the operating voltages remain within its 4.5 V to 36 V supply and common-mode limits. Its 1 V/V gain provides a direct representation of the sensed differential voltage, and the 950 µA quiescent current reduces continuous overhead compared with many higher-current instrumentation stages. The 1.5 MHz bandwidth supports feedback paths with moderate dynamics. Designers should compensate the amplifier delay and slew behavior in the control loop and maintain separate power and signal grounds to avoid injecting switching noise into the measurement.

📱

Portable Sensor Interfaces

For portable sensor interfaces, the INA133UG4 combines a 950 µA quiescent current with a precision 150 µV minimum input offset voltage and a 1.5 MHz bandwidth. This combination allows a differential sensor output to be conditioned without the external gain-setting network of a discrete difference amplifier. The compact 8-SOIC package supports space-constrained boards, and the 4.5 V minimum supply supports low-voltage systems. Battery life depends on the complete signal chain, so power-gating or shutdown strategies should be evaluated around the amplifier rather than inferred from its quiescent current alone.

What are the key specifications of INA133UG4 that engineers should know?
The INA133UG4 is a 1.5 MHz, single-circuit precision difference amplifier with 150 µV minimum input offset voltage, 950 µA quiescent current, and a 5 V/µs slew rate. According to the Texas Instruments INA133 product page, it operates across a 4.5 V to 36 V supply range and is offered in an 8-SOIC package. Its fixed differential gain of 1 V/V makes it suitable for shunt-current measurement, bridge sensing, and other applications where a scaled difference between two input voltages is required.
What is the operating voltage of INA133UG4?
The INA133UG4 operates from 4.5 V to 36 V. According to the Texas Instruments INA133 product page, this broad supply range supports low-voltage portable systems as well as industrial measurement circuits operating from higher rails. The available output swing depends on the supply voltage and extends from approximately ±2.25 V to ±18 V. Designers should verify that both input common-mode voltage and output voltage remain within the limits specified in the manufacturer datasheet.
How much current does INA133UG4 consume?
The INA133UG4 consumes 950 µA of quiescent current. According to the Texas Instruments INA133 product information, this low power consumption complements its 4.5 V to 36 V operating range and 1.5 MHz bandwidth. The value is particularly useful when designing battery-powered instrumentation, isolated measurement nodes, or compact sensor interfaces where sustained circuit power influences thermal performance and operating time.
What is the bandwidth and slew rate of INA133UG4?
The INA133UG4 has a -3 dB bandwidth of 1.5 MHz and a slew rate of 5 V/µs. According to the Texas Instruments INA133 product description, these specifications place it between low-speed precision measurement devices and higher-bandwidth signal conditioners. The 1.5 MHz bandwidth is suitable for many industrial transducer and current-sense signals, while the 5 V/µs slew rate allows comparatively fast output transitions when a large signal step is applied.
Where can I download the INA133UG4 datasheet PDF?
The INA133 datasheet and ordering information are available from the Texas Instruments INA133 product page at https://www.ti.com/product/INA133. The page identifies the INA133UG4 as an 8-SOIC differential-amplifier device and provides the technical information needed to verify supply voltage, offset, bandwidth, slew rate, output range, and package details. Use the manufacturer document for the authoritative pin description and application guidance.
Where is the pinout for INA133UG4?
The INA133UG4 pinout is identified in the manufacturer documentation for the INA133 family. The verified part information establishes an 8-SOIC package with a 0.154 inch body width and 3.90 mm overall width, but it does not enumerate individual terminal names or numbers. Consult the pin-description table in the Texas Instruments INA133 datasheet before assigning PCB nets, particularly for supply, reference, input, and output connections.
Where can I buy INA133UG4 online?
Use the Request a Quote form on this page to request INA133UG4 availability, order quantity, and current lead time. The manufacturer identifies INA133UG4 as an 8-SOIC precision difference amplifier, and multiple distribution records exist for the exact MPN. A formal quotation through the form is the appropriate route for current commercial terms and production scheduling.
What is the price of INA133UG4?
Use the Request a Quote form on this page for the current INA133UG4 price and volume breaks. The available product records do not present a complete quantity-break schedule for the exact MPN, so no static unit price is published here. Requesting a quotation allows current pricing, stock, and order quantity to be matched to your specific production requirement.
What is the lead time for INA133UG4?
Submit an INA133UG4 request through the Request a Quote form on this page to confirm the current lead time. The verified product records confirm the exact 8-SOIC device is offered for commercial supply, but they do not establish one universal production lead time. The confirmation should cover quantity, date code, shipment location, and whether the order requires any special handling.
Is INA133UG4 in stock?
Stock for INA133UG4 should be confirmed through the Request a Quote form on this page. Some distributor records describe inventory or immediate purchasing, but availability can change rapidly and may differ by quantity and shipment destination. A quotation request provides a current allocation without relying on a potentially stale inventory indication.
What is the difference between INA133UG4 and INA133U?
INA133UG4 and INA133U belong to the same Texas Instruments INA133 family and use the same 8-SOIC package, but their orderable suffix codes can denote different temperature, grade, or reel-packaging configurations. According to the manufacturer family information, both use the same 1.5 MHz bandwidth, 450 µV maximum input offset voltage, 950 µA quiescent current, and 4.5 V to 36 V supply range. Confirm the suffix-specific temperature rating and packing configuration before substitution.
When should I choose INA133UG4 over INA132UA?
Choose INA133UG4 when the design requires the INA133 family's 1.5 MHz bandwidth and 450 µV maximum input offset voltage. The INA132UA is a useful same-pin, same-package comparison candidate, but its exact offset and bandwidth characteristics must be checked against the application. INA133UG4 is the appropriate selection when its published 5 V/µs slew rate, low 950 µA quiescent current, and fixed 1 V/V gain satisfy the required signal and power specifications.
Is INA133UG4 suitable for high-side current sensing?
Yes, INA133UG4 is suitable for current sensing when the shunt voltage remains within its specified input common-mode range and the output does not exceed the supply limits. Its fixed 1 V/V gain directly represents the differential voltage across a shunt, while the 1.5 MHz bandwidth and 5 V/µs slew rate support many dynamic measurement systems. The 4.5 V to 36 V supply range also accommodates higher-voltage industrial systems.
What can replace INA133UG4?
INA133U is the closest orderable alternative identified for the INA133UG4 because it belongs to the same INA133 family, uses the same 8-SOIC package, and retains the family's principal electrical ratings. INA132UA is another possible same-package, pin-compatible family candidate, but it requires verification of offset, bandwidth, common-mode range, and temperature grade. Confirm every electrical limit in the manufacturer datasheet before replacing INA133UG4.
Is INA133UG4 the same as INA137UA?
No. INA137UA and INA133UG4 are related instrumentation-amplifier products, but they do not have identical specified performance or gain. The INA133UG4 provides a 1 V/V differential gain, 1.5 MHz bandwidth, 450 µV maximum offset, and 950 µA supply current. Because the INA137UA belongs to a different amplifier family, treat it as a redesign comparison rather than an automatic drop-in replacement.
How does INA133UG4 compare with INA133UA?
INA133UG4 and INA133UA are orderable variants of the Texas Instruments INA133 family with the same 8-SOIC footprint and core electrical function. Both are described by a 1.5 MHz -3 dB bandwidth, 450 µV maximum input offset voltage, 950 µA quiescent current, 5 V/µs slew rate, and 4.5 V to 36 V supply range. Their suffix codes determine commercial grade and packing details, which should be matched to the PCB assembly and environmental requirements.
What is the best amplifier choice for a precision bridge measurement?
The INA133UG4 is appropriate for a precision bridge measurement when a fixed 1 V/V differential output and fast settling are required. Its 450 µV maximum input offset voltage, 1.5 MHz bandwidth, and 5 V/µs slew rate provide a 1.5 MHz bandwidth and 5 V/µs slew rate provide a useful combination of precision and signal speed. The bridge excitation, common-mode voltage, grounding, and input filtering should be evaluated together before finalizing the signal chain.

Справочные инженерные данные для INA133UG4 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the INA133UG4 for low-power precision difference measurements that require a fixed 1 V/V gain, 1.5 MHz bandwidth, 450 µV maximum input offset voltage, and operation from a 4.5 V to 36 V supply. INA133U and INA133UA are the preferred alternatives when their temperature, grade, or packing configuration better matches the assembly; their core INA133 ratings and 8-SOIC footprint support straightforward reuse. Consider INA132UA or INA132UG4 when its lower approximate bandwidth remains acceptable and a related same-pin family part is useful for supply-chain flexibility. Do not treat the INA137UA as a direct replacement solely because it is also an instrumentation amplifier. In every case, verify common-mode range, output swing, input bias current, noise, temperature rating, and the exact suffix-specific ordering configuration.

Сравнение с аналогами

Параметр Этот товар INA133U INA133UA INA132UA INA132UG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same 8-SOIC - same
-3 dB Bandwidth 1.5 MHz 1.5 MHz 1.5 MHz Approximately 1.3 MHz Approximately 1.3 MHz
Differential Gain 1 V/V 1 V/V 1 V/V 1 V/V 1 V/V
Special Features Low-power, high-precision fixed-gain difference amplifier Same INA133 electrical family Same INA133 electrical family Related INA132 fixed-gain difference amplifier Related INA132 fixed-gain difference amplifier

Ключевые отличия

  • Higher bandwidth than the directly related INA132 options (против INA132UA)
  • Low 950 µA supply current for precision signal conditioning (против INA132UA)
  • Exact family compatibility for pin-compatible reuse (против INA133U)

Заметки по проектированию

Check the input common-mode range and output swing against the actual shunt, bridge, or sensor voltages before committing the circuit. The INA133UG4 accepts a 4.5 V to 36 V supply, but that supply rating does not permit arbitrary input or output excursions. A common design error is to assume that the output can reach a supply rail. Derive the maximum expected input differential voltage, common-mode voltage, and output swing, then include startup and fault-state margin in the design.

Place the INA133UG4 close to the sensed element and route the two input conductors as a compact differential pair over a continuous ground plane. Minimize shared copper in the input path because parasitic resistance in series with the high-impedance inputs can create gain errors. Keep the output route separate from the input pair, use a solid reference plane, and place any input filtering capacitors symmetrically so their tolerances and parasitics do not unbalance the measured signal.

Use the 1.5 MHz -3 dB bandwidth and 5 V/µs slew rate to determine whether the measurement bandwidth is adequate. Avoid excessive low-frequency filtering unless it is required for noise control, because high-value input and filter capacitors can interact with the amplifier's input bias current and introduce errors. Conversely, unfiltered high-frequency pickup can corrupt a low-rate measurement even when the sensor changes slowly. Establish the required signal bandwidth, then design the filter around that bandwidth.

Estimated: with a 5 V supply, 950 µA quiescent current, and no additional output current, the amplifier's nominal supply-power dissipation is 4.75 mW using Pd = VIN × IQ. This estimate excludes load current and regulator-conversion effects. Thermal stress is therefore normally modest in the specified operating region, but the complete board still needs airflow and copper-area checks under maximum ambient temperature, especially when the INA133UG4 drives a nearby load or shares a package region with other heat sources.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The INA133UG4 product record identifies RoHS compliance. Other environmental, automotive, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or an authoritative compliance document.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

INA133UG4 datasheet INA133UG4 pinout INA133UG4 datasheet pdf INA133UG4 equivalent INA133UG4 replacement INA133UG4 cross reference INA133UG4 vs INA133U INA133UG4 8-SOIC footprint INA133UG4 price INA133UG4 stock Texas Instruments INA133UG4 INA133UG4 current sensing INA133UG4 bridge measurement INA133UG4 supply voltage

Связанные компоненты & термины

Texas Instruments INA133UG4 INA133U INA133UA INA132UA INA132UG4 precision difference amplifier instrumentation amplifier differential amplifier analog amplifier signal-conditioning IC semiconductor fixed gain 1 V/V differential gain common-mode rejection input offset voltage quiescent current slew rate -3 dB bandwidth 8-SOIC SOIC family surface-mount package industrial current sensing bridge transducer RoHS
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ