Микроконтроллеры

Товары (18177)

S9S08DZ48F1CLH - 8-bit MCU, 48KB Flash, CAN, 64-LQFP | NXP
S9S08DZ48F1CLH

S9S08DZ48F1CLH - 8-bit MCU, 48KB Flash, CAN, 64-LQFP | NXP

The NXP (Freescale) S9S08DZ48F1CLH is an 8-bit microcontroller from the S08DZ family built on the enhanced HCS08 core, running at up to 40 MHz CPU / 20 MHz bus speed with 48KB of Flash program memory and 64KB addressable space, housed in a 64-pin LQFP (10x10 mm) surface-mount package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, and peripheral modules such as timers, serial interfaces, and analog-to-digital converters. Within the hierarchy of embedded processors, 8-bit MCUs such as the HCS08 family sit below 16-bit and 32-bit devices, offering low cost, low power, and simple single-supply designs for control-oriented tasks. The S08DZ family is NXP's first 8-bit MCU family with embedded CAN, embedded EEPROM, and on-chip emulation/debug, targeting automotive and industrial markets. Key features of the S9S08DZ48F1CLH include the 40 MHz HCS08 CPU with HC08 instruction set plus the added BGND instruction, support for up to 32 interrupt/reset sources, 48KB Flash with in-application reprogramming, 3KB RAM, and embedded EEPROM for parameter storage. The integrated CAN (FlexCAN-type) module is the family's defining differentiator, enabling direct connection to vehicle networks and industrial field buses without an external CAN controller. Technically, the device uses the enhanced HCS08 core with a background debug mode (BGND) that supports non-intrusive on-chip debugging and flash programming through a single-wire interface, reducing development cost by eliminating the need for expensive socketed emulators. Scalability across the S08D family - with pin, peripheral, and software-compatible members at 16KB, 32KB, 48KB, and 60KB - allows firmware migration as memory requirements grow. Typical applications include body control modules, gateways, seat and mirror controllers, HVAC actuators in automotive systems, and motor control, lighting, and sensor-node designs in industrial equipment where Controller Area Network connectivity is required. Designers should budget the Flash endurance and EEPROM wear levels against their parameter-logging rate, and use the on-chip debug interface during development to avoid reserving pins for external debugging hardware. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with verified availability data as of 2026-10-18.

USD $0,80 В наличии
S9S08DZ48F2MLH - 8-Bit 40MHz 48KB Flash MCU | NXP
S9S08DZ48F2MLH

S9S08DZ48F2MLH - 8-Bit 40MHz 48KB Flash MCU | NXP

The NXP Semiconductors S9S08DZ48F2MLH is an 8-bit S08 CISC microcontroller operating up to 40 MHz, with 48 KB of flash memory and a 64-pin LQFP package. According to the verified NXP and DigiKey product data, the device is designed for automotive and industrial control systems requiring embedded communication, mixed-signal control, and robust peripheral integration. The verified distributor listing specifies 53 I/O, CANbus, I2C, LINbus, SCI, and SPI connectivity, while the NXP page identifies a LIN physical layer, 4 KB RAM, and an integrated LCD driver. An 8-bit microcontroller is a compact embedded controller used to monitor inputs, execute control logic, and operate peripherals in systems such as automotive body modules, industrial equipment, consumer products, and sensor-control boards. The S08 architecture belongs to the broader microcontroller and embedded-processing hierarchy. Unlike a general-purpose microprocessor, this device integrates flash, RAM, communication interfaces, timers, analog functions, and debug support into one package. The S9S08DZ48F2MLH combines 48 KB flash with 4 KB RAM and a 40 MHz maximum clock, providing useful memory capacity for protocol handling and control firmware. Its listed CANbus, I2C, LINbus, SCI, and SPI interfaces allow the controller to connect to automotive networks, sensors, transceivers, and external peripherals. The integrated LCD driver is also relevant to local human-interface displays, while the reported 1.5K x 8 EEPROM adds nonvolatile data storage. The verified data identifies an automotive-qualified S08 family variant with an operating temperature range of -40 to +125 degrees Celsius. The 64-LQFP package provides 64 terminals and is suited to conventional surface-mount assembly. NXP’s product page describes the part as active, while distributor listings show availability and product documentation; exact current inventory, lead time, and price were not supplied as fixed values. Typical uses include automotive body-control modules, LIN-connected sensors, CAN gateway equipment, industrial instrumentation, and compact display-control systems. Before designing a replacement, engineers should verify the exact pinout, clock configuration, memory map, peripheral set, electrical limits, and software compatibility from the manufacturer datasheet. The most important design consideration is firmware and peripheral equivalence: a same-package device is not automatically a functional replacement if its pin multiplexing, timer resources, communication modules, or memory organization differs. This page combines verified source data with cautious qualification of every replacement claim. Unlike a distributor listing that mainly provides catalog data, this page records the verified source set, distinguishes confirmed specifications from unavailable data, and applies strict drop-in criteria to proposed alternatives. Pricing, lead time, pin names, and unreported compliance claims are intentionally not inferred.

Запрос цены В наличии
S9S08DZ60F1CLH - 8-bit 40MHz 60KB Flash MCU, 64-LQFP | NXP
S9S08DZ60F1CLH

S9S08DZ60F1CLH - 8-bit 40MHz 60KB Flash MCU, 64-LQFP | NXP

The NXP S9S08DZ60F1CLH is an 8-bit S08-family microcontroller (MCU) running at 40 MHz, integrating 60 KB of on-chip Flash program memory and 2 KB of EEPROM, and packaged in a 64-pin LQFP (10x10 mm). It belongs to NXP's legacy S08DZ sub-family that targets cost-sensitive automotive and industrial body/sensor applications with on-chip CAN, LIN, SCI, SPI, and I2C peripherals. An 8-bit microcontroller is a single-chip computer that integrates a CPU core, program memory, data memory, and peripheral interfaces on one silicon die. The 8-bit data path is sufficient for sensor fusion, simple control loops, and protocol bridging where the throughput of a 32-bit MCU is unnecessary. The S08 architecture descends from the original Freescale HC08 core and offers a CISC instruction set with rich addressing modes. Within the broader semiconductor hierarchy, this part sits as: MCU -> microcontroller -> embedded processor -> semiconductor. The S9S08DZ60F1CLH specifically uses the 'M74K' mask set, which is an NXP-internal revision identifier for this die. Key features include 53 general-purpose I/O lines, a CAN 2.0B controller, LIN 2.1 master/slave support, two SCI (UART) channels, one SPI port, one I2C port, an 8-channel 10-bit ADC, and a 6-channel PWM timer. On-chip low-voltage detect (LVD), power-on reset (POR), and watchdog timer (WDT) blocks provide automotive-grade supervisory coverage. The device operates from 2.7 V to 5.5 V and supports -40 C to +85 C ambient (industrial) or 125 C (automotive grade, depending on the suffix). Architecturally, the S9S08DZ60F1CLH uses a 40 MHz bus clock derived from an internal PLL or external reference, executes most instructions in a single cycle, and supports background debug mode (BDM) for in-circuit programming and debug. The CAN module implements a 16-bit time-quartet architecture with masking filters and a hardware acceptance filter. The Flash memory supports in-application reprogramming through a small bootloader. Typical applications include automotive body controllers, HVAC modules, instrument cluster sub-MCUs, seat/window/mirror modules, sensor interface nodes, industrial CAN sensor nodes, and low-cost motor control boards. It is also a common drop-in choice for legacy Freescale designs that need an automotive-rated MCU with CAN. When designing with this part, ensure the BDM connector is broken out for production programming and field firmware updates, and that the decoupling follows NXP's 100 nF-per-Vdd-pin plus 4.7 uF bulk recommendations. Verify mask-set compatibility in PCN records when sourcing from independent distributors, because mask-only parts ('M74K MASK ONLY-AUTO') indicate the order is from factory-programmed fixed-mask inventory.

USD $5,95 В наличии
S9S08DZ60F1MLC - 8-bit MCU, 60KB Flash, CAN, 32-LQFP | NXP
S9S08DZ60F1MLC

S9S08DZ60F1MLC - 8-bit MCU, 60KB Flash, CAN, 32-LQFP | NXP

The NXP S9S08DZ60F1MLC is a 40 MHz HCS08-family 8-bit automotive microcontroller with 60 KB of on-chip Flash, 4 KB SRAM, and integrated CAN, in a 32-pin LQFP (7x7 mm) package with M74K mask set marking. The device belongs to the S08DZ60 series, which combines an enhanced HCS08 core, on-chip EEPROM emulation, and an MSCAN (CAN 2.0A/B) controller. An 8-bit microcontroller (MCU) is a single-chip processor with on-board Flash program memory, RAM, peripherals, and interrupt control, optimized for embedded control in cost-sensitive and real-time systems. The HCS08 core is the enhanced successor to the HC08 architecture, offering the same HC08 instruction set with the addition of BGND (background debug) and higher code density. Within the broader hierarchy, the S08DZ60 belongs to the microcontrollers (MCU) category of integrated circuits, then to the 8-bit MCU subcategory, then to the automotive-grade segment. Key features include 60 KB Flash (60K x 8), 4 KB SRAM, on-chip EEPROM emulation, an MSCAN controller for CAN 2.0A/B networking, a 40 MHz CPU with a 20 MHz bus, and support for up to 32 interrupt/reset sources. The S9S08DZ60F1MLC variant carries the M74K mask set designation ("MASK ONLY-AUTO") and is qualified to automotive temperature grade (-40C to +125C). The 32-LQFP (7x7 mm) package supports surface-mount assembly and provides ample GPIO for body, chassis, and sensor interface applications. Typical applications include automotive body controllers, CAN nodes (door modules, seat controllers, mirror modules), industrial sensor hubs, LIN/CAN gateway bridges, and low-end instrument clusters. The combination of on-chip CAN and 60 KB Flash simplifies BOM and PCB layout in distributed automotive networks. When designing with this MCU, ensure the BDS (background debug) interface is accessible for in-circuit programming and that the VDDA/VREF decoupling follows NXP reference design guidance. Use the on-chip CAN controller with an external CAN transceiver (e.g. TJA1050 or TJA1040). The "F1" mask set designation means the part is shipped with the F1 firmware mask pre-programmed, so this SKU is intended for production runs against the M74K firmware baseline rather than for general development. This page synthesizes distributor pricing, drop-in alternative MPNs (same LQFP-32 footprint), and practical design considerations for production engineers, providing actionable information not found in the manufacturer datasheet alone.

USD $5,45 В наличии
S9S08DZ60F1MLF - 8-Bit 40MHz HCS08 MCU 60KB Flash 48-LQFP | NXP
S9S08DZ60F1MLF

S9S08DZ60F1MLF - 8-Bit 40MHz HCS08 MCU 60KB Flash 48-LQFP | NXP

The NXP S9S08DZ60F1MLF is a 40 MHz HCS08-family 8-bit microcontroller with 60 KB (60K x 8) of on-chip FLASH, 4 KB of RAM, and 39 general-purpose I/O lines, packaged in a 48-pin LQFP (7x7 mm). It is part of the S08DZ sub-family of NXP's (formerly Freescale) HCS08 high-performance 8-bit MCU portfolio, integrating a 40 MHz central processing unit with a 20 MHz bus and the HC08 instruction set augmented by the BGND instruction for background-debug support. The device operates from a 3.3 V / 5 V supply, exposing CAN, SCI (UART), SPI, and an on-chip 12-bit ADC plus timers that are characteristic of the DZ-series automotive/industrial peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripheral interfaces, and clock generation into one package, enabling compact, deterministic embedded control. Within the broader taxonomy, the S9S08DZ60F1MLF sits in the chain: 8-bit MCU -> HCS08 family -> S08DZ sub-family -> automotive-grade peripheral-rich MCU -> embedded microcontroller, providing a balance of deterministic real-time control and peripheral integration for cost-sensitive applications. Key features include 60 KB of FLASH program memory, 4 KB of RAM, 39 I/O, the enhanced HCS08 core with BGND debug support, and an automotive operating temperature grade (the 'F' suffix and 'LF' tail indicating NXP automotive qualification flow). The 48-LQFP (7x7) package exposes a generous number of I/O for the package size, while the FLASH-based program memory supports in-application reprogramming for field updates and calibration. Peripherals typical of this part include MSCAN (CAN 2.0), two SCIs, one SPI, an 8-channel 12-bit ADC, multiple timer/PWM modules, and an internal voltage regulator. Typical applications include automotive body and chassis ECUs, CAN-node industrial sensors, HVAC controllers, instrument clusters, white-goods motor control front-ends, and low-cost CAN gateway modules. The wide 3.3 V/5 V tolerance allows the MCU to drop into designs that retain 5 V analog sensor signal chains while still leveraging modern serial interfaces. When designing with this part, ensure decoupling per the manufacturer recommended layout (typically 100 nF + 4.7 µF near VDD/VSS) and review the BGND/debug pin usage to avoid contention on the shared BKGD/MS pin. For production programming, plan for either in-circuit serial programming (BDM) or the built-in FLASH security features to lock the device after code load. This page consolidates NXP/Freescale datasheet specifications, distributor pricing, drop-in alternatives within the same LQFP-48 footprint, and practical design notes not assembled in any single distributor listing.

USD $4,95 В наличии
S9S08DZ60F2CLF - 40MHz 60KB 8-Bit MCU | NXP | Automotive
S9S08DZ60F2CLF

S9S08DZ60F2CLF - 40MHz 60KB 8-Bit MCU | NXP | Automotive

The NXP Semiconductors S9S08DZ60F2CLF is an active, automotive-qualified 8-bit S08 microcontroller with a 40 MHz core, 60 KB of Flash, 4 KB of RAM, and a 48-LQFP 7 x 7 mm package. It integrates CANbus, I2C, LINbus, SCI, SPI, ADC channels, PWM, watchdog, low-voltage detection, and power-on reset for embedded automotive and industrial control. What is an 8-bit microcontroller? An MCU is a semiconductor that combines a processor core, memory, and peripherals on one device. This S08 MCU belongs to the microcontroller, embedded processor, and semiconductor hierarchy. Its communication interfaces support connected control systems, while timers, PWM, and analog inputs support actuator monitoring and embedded automation. The verified component data identifies a 60K x 8 Flash organization, 2K x 8 EEPROM, 39 I/O ports, and a maximum clock frequency of 40 MHz. The S08D family is described as supporting embedded CAN, embedded EEPROM, and on-chip emulation/debug for automotive and industrial markets. Connectivity listed for this device includes CANbus, I2C, LINbus, SCI, and SPI. Its 48-LQFP package is a gull-wing, surface-mount package specified as 7 x 7 mm. The verified operating temperature range is -40 °C to +85 °C, and a third-party listing identifies the device as automotive qualified. These characteristics make it appropriate for temperature-range-sensitive embedded control platforms, subject to confirming the complete electrical and qualification requirements in the manufacturer documentation. Typical uses include automotive body and motor-control electronics, industrial automation, metering equipment, IoT devices, and low-power embedded boards. The multiple serial interfaces allow the MCU to connect sensors, transceivers, actuators, and service connectors while the ADC, PWM, and watchdog support measurement, timing, and protective control functions. A key design consideration is package and firmware compatibility: the MCU has 48 terminals, and replacement decisions must verify exact pin mapping, memory map, clock behavior, peripheral assignments, and qualification status rather than relying only on the family name. Use the NXP product page and manufacturer data sheet before finalizing a new PCB or migration. This page consolidates verified distributor and manufacturer information, package constraints, application guidance, and replacement-screening criteria to support faster component selection while clearly separating known data from information that still requires design verification.

Запрос цены В наличии
S9S08DZ60F2MLF - 8-bit S08 MCU, 60KB Flash, CAN | NXP
S9S08DZ60F2MLF

S9S08DZ60F2MLF - 8-bit S08 MCU, 60KB Flash, CAN | NXP

The NXP Semiconductors S9S08DZ60F2MLF is an 8-bit microcontroller based on the S08 core, running at up to 40 MHz with 60 KB of on-chip flash memory, 2 KB of EEPROM and 4 KB of RAM, housed in a 48-pin LQFP (7x7 mm) package qualified for automotive applications operating from -40C to +125C. An 8-bit microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory and peripherals on one die. Within the power management and control hierarchy of an embedded system, the MCU sits at the application-control layer, executing firmware that reads sensors, drives actuators and communicates over networks such as CAN, LIN or I2C. The S08D family was developed by NXP (formerly Freescale) as one of the industry's first 8-bit MCU families with embedded CAN, embedded EEPROM and on-chip emulation/debug, targeting automotive body electronics and industrial control. Key differentiating features of the S9S08DZ60F2MLF include its Controller Area Network (CANbus) module for robust in-vehicle networking, a LIN bus interface for low-cost subnetworks, and serial connectivity via I2C, SCI (UART) and SPI. Peripheral support covers PWM outputs, a watchdog timer (WDT), low-voltage detection (LVD) and power-on reset (POR), reducing external component count. The 2 KB embedded EEPROM allows calibration data and fault logs to be stored without an external memory device. Technically, the S08 core is a fully static 8-bit CMOS processor with an enhanced instruction set derived from the HC08, offering efficient C compilation and background debugging through on-chip emulation logic (BDM), which eliminates the need for costly in-circuit emulators during development. The flash memory is in-circuit programmable, enabling field firmware updates over CAN or LIN. Typical applications include automotive body control modules, seat and mirror controllers, HVAC actuators, door modules, LIN/CAN gateway nodes in vehicles, and industrial control systems requiring a CAN-connected 8-bit workhorse. The AEC-Q-style automotive qualification and -40C to +125C rating make it suitable under-hood-adjacent and harsh-environment environments. Design consideration: the 48-LQFP provides 39 GPIO, so verify I/O allocation early; CAN and LIN transceivers are external, so budget for physical-layer components. Supply voltage and detailed peripheral electrical characteristics should be confirmed in the NXP device datasheet before layout. This page synthesizes distributor pricing, drop-in alternatives within the S08D family, and practical design notes not found in the manufacturer datasheet alone.

USD $2,85 В наличии
S9S08DZ60F2MLH - 8-bit S08 MCU, 60KB Flash, CAN | NXP
S9S08DZ60F2MLH

S9S08DZ60F2MLH - 8-bit S08 MCU, 60KB Flash, CAN | NXP

The NXP S9S08DZ60F2MLH is an automotive-qualified 8-bit S08 (HCS08) microcontroller running at up to 40 MHz, with 60 KB of flash memory, 4 KB of RAM, and an integrated CAN (msCAN) module, housed in a 64-pin LQFP (10x10 mm) package rated from -40 C to +125 C. An 8-bit microcontroller is an integrated circuit that executes program code on a CPU processing 8-bit data words, combining processor core, memory, and peripherals on a single chip. Within the power-management and embedded-control hierarchy, the S08DZ family sits in NXP's automotive 8-bit lineup, one tier below the 16-bit S12 series, and is typically used for body electronics, gateway assistants, and control nodes rather than high-compute processing. Key features include the 40 MHz S08 core with a maximum internal bus clock of 20 MHz, 60 KB of in-system-programmable flash, an msCAN controller for CAN 2.0 A/B networking, and an integrated LCD driver. The device also integrates a 12-channel, 12-bit ADC (per LCSC listing), a real-time counter, serial peripherals (SCI, SPI, IIC), and operates from a 3.3 V or 5 V supply. The S08 core uses a CISC architecture with efficient addressing modes and single-cycle access to RAM, making C-compiler code density strong for 8-bit applications. The flash supports in-circuit programming through the background debug interface (BDM), simplifying field firmware updates in automotive modules. The -40 C to +125 C ambient rating and NXP automotive qualification make it suitable for under-hood-adjacent and body-control environments. Typical applications include automotive body control modules, HVAC controllers, instrument clusters with LCD drive, CAN-networked sensor nodes, and industrial control systems requiring a robust 8-bit MCU with CAN connectivity. When designing with this device, verify the flash programming voltage and use the on-chip FLL to derive the 40 MHz core clock from a low-cost crystal, keeping EMI low in CAN-heavy systems. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $2,45 В наличии
S9S08DZ60F2MLHR - 8-bit S08 MCU 60KB Flash 40MHz | NXP
S9S08DZ60F2MLHR

S9S08DZ60F2MLHR - 8-bit S08 MCU 60KB Flash 40MHz | NXP

The NXP S9S08DZ60F2MLHR is an 8-bit S08-family microcontroller (MCU) featuring a 40 MHz CPU core, 60 KB of on-chip Flash memory and an integrated LCD driver with CAN connectivity, housed in a 64-pin LQFP package (10x10 mm). It is rated for the automotive -40C to +125C temperature range and is qualified to AEC-Q100, making it suitable for harsh-environment body, chassis and industrial-control applications. The part integrates multiple timers, ADC channels and communication peripherals, supporting typical embedded-control workloads without external co-processors. A microcontroller (MCU) is a single-chip computer that combines a CPU core, volatile and non-volatile memory, and programmable peripherals into one integrated circuit. The S08 core from NXP is a streamlined 8-bit CISC architecture that executes most instructions in a single bus cycle, balancing code density with deterministic interrupt response. Within the broader taxonomy, the S08DZ series sits below 16-bit S12 and 32-bit Kinetis families, targeting cost-sensitive, deterministic real-time control with low power consumption and small code footprints. Key features include 60 KB of Flash program memory, 2 KB of RAM, 4 KB of EEPROM, an integrated CAN 2.0 A/B controller, an SCI, an SPI, an I2C interface, an LCD driver supporting up to 320 segments, multiple 16-bit timers (TPM), and a 12-bit SAR ADC with up to 24 channels. The 40 MHz bus clock delivers up to 20 MIPS, sufficient for brushed DC and stepper motor control loops, sensor fusion and human-machine interface (HMI) workloads. The device uses an HCS08 instruction set with a background debug mode (BDM) accessible through a single-wire interface. On-chip voltage regulation supports 2.7V to 5.5V single-supply operation; the on-chip charge pump supports in-application Flash programming and EEPROM erase/write at full bus speed. Internal clock sources include an FLL-stabilized internal reference and a low-power oscillator, allowing flexible power modes (Run, Wait, Stop3). Typical use cases include automotive instrument clusters, body controllers, HVAC control modules, industrial sensor hubs, and small graphical LCD-based HMI panels. The integrated CAN interface is well suited to vehicle network nodes where the part must exchange J-Link commands simultaneously with local sensor sampling. When designing with this device, ensure adequate decoupling (100 nF + 4.7 uF minimum) near each supply pin, route the CAN bus with 120-ohm characteristic impedance, and verify LCD segment contrast across the operating temperature window. The 64-LQFP footprint requires standard surface-mount assembly; thermal dissipation is low (under 100 mW typical) and the exposed pad aids board-level thermal relief. This page synthesizes distributor pricing, drop-in same-family alternatives and practical design notes not found in the manufacturer datasheet.

USD $4,08 В наличии
S9S08DZ96F2MLH - 8-bit S08 MCU, 96KB Flash, CAN | NXP
S9S08DZ96F2MLH

S9S08DZ96F2MLH - 8-bit S08 MCU, 96KB Flash, CAN | NXP

The NXP Semiconductors S9S08DZ96F2MLH is an automotive-qualified 8-bit microcontroller based on the S08 (HCS08) core, running at up to 40 MHz bus speed, with 96 KB of on-chip flash memory and 2 KB of embedded EEPROM, housed in a 64-pin LQFP (QFP 64) package rated from -40C to +125C. An 8-bit microcontroller is a single-chip computer that integrates a processor core, program flash, RAM, EEPROM, and peripherals such as timers, serial interfaces, and analog-to-digital converters on one die. Within the embedded systems hierarchy, the S08DZ family sits in the cost-sensitive 8-bit MCU segment, positioned below 16-bit and 32-bit MCUs but differentiated by integrated Controller Area Network (CAN) connectivity, a feature historically reserved for larger devices. Key features include the industry-first integration of embedded CAN, embedded EEPROM, and on-chip emulation/debug in an 8-bit MCU family. The 96 KB flash supports field reprogramming, while the 2 KB EEPROM retains calibration data through power cycles without external memory. The 40 MHz S08 core delivers efficient execution for automotive body, gateway, and node applications. Automotive qualification and the -40C to +125C temperature range support underhood and harsh-environment deployments. Architecturally, the S08 core is an enhanced, fully static HCS08 CPU with a background debug module that provides non-intrusive, on-chip emulation without consuming pin or memory resources. This reduces development cost by eliminating the need for bond-out or emulation chips in automotive tier-1 tooling. Typical applications include automotive body control modules, seat and door controllers, HVAC nodes, CAN-gateway sub-nodes, and industrial CAN networks where a low-cost 8-bit device must communicate on a CAN 2.0 bus. Design consideration: verify flash and EEPROM endurance requirements against your application write budget, and confirm the exact 64-pin LQFP pin assignment against the NXP reference manual before layout. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $7,25 В наличии
S9S08DZ96F2VLF - 8-bit MCU, 96KB Flash, 40MHz, CAN, USB | NXP
S9S08DZ96F2VLF

S9S08DZ96F2VLF - 8-bit MCU, 96KB Flash, 40MHz, CAN, USB | NXP

The NXP S9S08DZ96F2VLF is an 8-bit S08 microcontroller with 96 KB of Flash, 6 KB of RAM, an integrated CAN controller and USB 2.0 Full-Speed device, packaged in a 48-pin LQFP (7x7 mm) for automotive and industrial embedded systems. The part runs at up to 40 MHz core clock, operates from 2.7V to 5.5V, and is rated for the -40C to +105C automotive temperature range. It belongs to NXP's S9S08DZ family, the industry's first 8-bit MCU family with embedded CAN, embedded EEPROM and on-chip emulation/debug for automotive and industrial markets. An 8-bit microcontroller (MCU) is a programmable processor with an 8-bit data path that integrates CPU, memory and peripherals on a single die. The S08 is NXP's 8-bit CPU core family, positioned within the broader ColdFire / HC(S)08 lineage. MCUs sit at the bottom of the embedded computing hierarchy: microcontroller -> microprocessor -> embedded processor -> computing system. In a CAN-equipped node the MCU handles physical-layer timing, message filtering and on-chip diagnostics, replacing what would otherwise require an external controller plus a CPU. Key features include 96 KB of on-chip Flash with in-application reprogrammability, 6 KB of SRAM, an embedded CAN 2.0 A/B controller, a USB 2.0 Full-Speed (12 Mbps) device controller, an LCD driver, multi-channel 10-bit ADC, PWM timers and an on-chip background-debug mode (BDM) for flash programming and in-circuit debug. The peripheral set is tuned for automotive body and chassis networks where CAN connectivity, low EMI and AEC-Q100 reliability matter more than raw MIPS. Architecturally the S9S08DZ96F2VLF uses the S08 CPU core with the HCS08 instruction set, a 32-bit internal HCS08-style bus extension, on-chip voltage regulator, and a low-power run/wait/stop mode structure with peripheral run clock gating. The 40 MHz bus clock is internally divided from an external crystal or the internal oscillator; the Flash is mapped into a 64 KB-aligned address window with EEPROM emulation support. Typical applications include automotive body controllers, instrument clusters, HVAC panels, CAN IO expansion modules, industrial sensor hubs with USB diagnostic interface and small appliances with segmented LCD displays. The wide 2.7V-5.5V supply range tolerates 3.3V and 5V rails found in both automotive and industrial designs. When designing with this part, leave at least 6 unused GPIO pins for field-recovery and bootloader modes, use 100 nF + 4.7 uF decoupling within 5 mm of VDD/VSS, and follow NXP AN2497 layout guidance for the CAN transceiver bus-termination network. The LQFP-48 footprint is footprint-compatible with several S9S08DZ and S9S12 relatives (same 48-pin body, 0.5 mm pitch), enabling scaled memory upgrades without PCB rework. This page synthesizes distributor pricing, AEC-Q100 qualification status, drop-in alternative pinouts and practical design notes that go beyond the marketing datasheet summary.

USD $6,55 В наличии
S9S08DZ96F2VLH - 40MHz 96KB Flash CAN MCU | NXP
S9S08DZ96F2VLH

S9S08DZ96F2VLH - 40MHz 96KB Flash CAN MCU | NXP

The NXP Semiconductors S9S08DZ96F2VLH is an 8-bit S08D microcontroller with a 40 MHz HCS08 CPU core, 96 KB of flash memory, 6 KB of RAM, 2 KB of EEPROM, embedded CAN, an LCD driver, and a 64-LQFP package. It is designed for automotive and industrial embedded systems where CAN connectivity, deterministic control, and integrated memory reduce external component count. The controller operates from a 3.3 V or 5 V supply according to the retrieved product descriptions, and the bus frequency reaches 40 MHz. A microcontroller is a programmable semiconductor that combines a CPU, memory, and peripherals on one integrated circuit. This S08D device belongs to the 8-bit microcontroller hierarchy, where the CPU processes embedded control tasks and connected peripherals handle communication, timing, data acquisition, and output functions. Its embedded CAN controller makes it suitable for distributed vehicle, industrial, and equipment-control networks, while the LCD driver supports human-interface or display-oriented designs without relying entirely on an external display controller. The main feature set includes 96 KB of flash for firmware, 6 KB of RAM for working data, 2 KB of EEPROM for nonvolatile parameters, embedded CAN, an LCD driver, and a maximum 40 MHz bus frequency. These resources allow the MCU to combine control logic, communication, and persistent configuration in one package. The 64-LQFP package provides 64 external terminals and is suitable for conventional surface-mount PCB assembly. S9S08DZ96F2VLH belongs to the S08D family, identified in the retrieved data as an automotive and industrial-oriented 8-bit family with scalable migration and embedded CAN capability. The architecture is intended to balance real-time control with compact code size and low system complexity. Designers should consult the manufacturer datasheet for exact peripheral availability, electrical limits, clock configuration, and pin multiplexing before finalizing a new design. Typical uses include automotive body and powertrain-adjacent modules, industrial controllers, CAN-connected sensors, equipment interfaces, and compact embedded control products. Because the supplied evidence identifies embedded CAN, LCD driving, flash, RAM, EEPROM, and the 40 MHz bus, these are the strongest application areas for this part. A system requiring additional external memory, different communication protocols, or a different package should be reviewed against the current datasheet. The principal design consideration is package and pin compatibility. S9S08DZ96F2VLH uses a 64-LQFP footprint, so any substitution must preserve the exact pin arrangement, electrical limits, clock behavior, memory map, and peripheral functions. The retrieved data does not provide a verified alternate manufacturer part, so production sourcing should be based on the NXP ordering information and current manufacturer documentation. This product summary consolidates the verified NXP product description, distributor listings, package information, and application-relevant details into an engineering-oriented reference. It also identifies where the available evidence is incomplete, rather than estimating technical values, pricing, or replacement specifications that were not supplied.

Запрос цены В наличии
S9S08DZ96F2VLL - 8-bit MCU, 96KB Flash, 40MHz | NXP
S9S08DZ96F2VLL

S9S08DZ96F2VLL - 8-bit MCU, 96KB Flash, 40MHz | NXP

The NXP Semiconductors S9S08DZ96F2VLL is an 8-bit S08-core microcontroller with 96KB (96K x 8) flash memory, 6KB RAM, and 2KB embedded EEPROM, operating at up to 40MHz (20MHz internal bus) in a 100-pin LQFP (14x14 mm) package. An 8-bit microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals on a single chip, forming the lowest tier of the microcontroller hierarchy that spans 8-bit MCUs, 16-bit MCUs, and 32-bit MCUs. The S08 core executes the HC08 instruction set with an added BGND instruction, positioning this device as a direct descendant of the widely deployed Freescale HCS08 family for cost-sensitive embedded control. Key features include the 40MHz HCS08 CPU with support for up to 32 interrupt/reset sources, a 24-channel 12-bit ADC with 2.5 us conversion time, an on-chip DMA controller, PWM channels, and embedded nonvolatile EEPROM for parameter storage without external memory. The device integrates a CAN module, distinguishing it within the 8-bit segment, which is uncommon for 8-bit architectures. Technically, the S9S08DZ96F2VLL uses flash program memory with in-circuit programming capability and on-chip emulation/debug, simplifying development without additional debugger silicon. The external oscillator type supports precision clocking for CAN and UART timing budgets. The part is automotive qualified and rated for operation from -40C to +105C, supporting under-hood and industrial ambient conditions. Typical applications include automotive body electronics, industrial control nodes, CAN-based sensor modules, and cost-sensitive appliances requiring 12-bit analog acquisition. The 87 general-purpose I/O lines and rich timer set make it suitable for motor control and HMI boards implemented on a single MCU. For design, verify the flash and EEPROM endurance budget against your rewrite rate, and account for the 20MHz bus clock when sizing interrupt latency in CAN-heavy systems. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4,40 В наличии
S9S08EL32F1CTJ - HCS08 32KB Flash MCU 144-LFQFP | NXP
S9S08EL32F1CTJ

S9S08EL32F1CTJ - HCS08 32KB Flash MCU 144-LFQFP | NXP

The NXP Semiconductors S9S08EL32F1CTJ is a member of the S08 family of 8-bit microcontrollers built around the HCS08 CPU core, offering 32 KB of on-chip Flash program memory, 1 KB of RAM, and integrated peripherals including SPI, ADC, timers, and analog comparators in a 144-pin LFQFP surface-mount package. This cost-optimized MCU targets motor control and appliance applications with an operating voltage range suited to industrial environments and a 40 MHz HCS08 core frequency capable of delivering the throughput required for brushless DC motor commutation, sensor readout, and user-interface handling in a single chip. A microcontroller (MCU) is a single-chip computational platform that integrates a CPU, program memory (Flash or ROM), data memory (RAM), and programmable peripheral interfaces (ADC, PWM, timers, communication controllers) on a single die. Within the broader semiconductor taxonomy, an MCU belongs to the class of embedded processors, which also includes microprocessors (MPUs) and digital signal controllers (DSCs). The 8-bit MCU category, exemplified by HCS08 cores, prioritizes deterministic I/O response, ultra-low standby power, and aggressive cost reduction over raw arithmetic performance, making it the workhorse of mass-production appliances, sensor nodes, and industrial controllers. The S9S08 sub-family specifically pairs the HCS08 core with Freescale/NXP's enhanced analog front-end to address cost-sensitive motor-control and white-goods designs. Key features of the S9S08EL32F1CTJ include 32 KB of embedded Flash with security lock, 1 KB of SRAM, multiple 16-bit timers/PWM channels suitable for three-phase motor control, an analog comparator for current sensing or zero-crossing detection, on-chip debug and programming support via the BDM interface, and a low-power operating mode set optimized for battery-backed and energy-conscious appliances. The wide supply voltage tolerance supports both 3.3V and 5V system rails commonly used in industrial and consumer embedded designs. Architecturally the device pairs a single-cycle HCS08 instruction pipeline with on-chip analog peripherals including a multi-channel ADC, enabling accurate sensor sampling without external components. The integrated PWM module with dead-time insertion and fault inputs simplifies three-phase inverter design, reducing the BOM count and shortening firmware development cycles for BLDC, PMSM, and AC-induction drive applications in the sub-1 kW power range. Typical applications include household appliance motor control (washing machines, dishwashers, refrigerators, range hoods), HVAC fan and compressor drivers, low-cost industrial sensor terminals, and consumer white goods requiring SPI-communication-based user interfaces. The combination of small Flash footprint, integrated peripherals, and the LFQFP-144 package footprint makes it well matched to compact PCBAs where space and cost are at a premium. Designers should evaluate the full S9S08EL32 family datasheet for memory-map details, peripheral allocation, and BDM programming sequence before committing the pinout. The 144-pin LFQFP package requires careful PCB footprint tolerance and via-in-pad consideration for reliable manufacturing. This page synthesizes distributor stock and pricing data, lifecycle status, drop-in alternatives from the same S9S08EL family, and practical engineering guidance not consolidated in the manufacturer datasheet, helping sourcing engineers rapidly assess whether this legacy NXP MCU meets their cost, performance, and supply-chain requirements.

USD $5,25 В наличии
S9S08EL32F1MTL - 8-bit S08 MCU, 32KB Flash, 40MHz | NXP Semiconductors
S9S08EL32F1MTL

S9S08EL32F1MTL - 8-bit S08 MCU, 32KB Flash, 40MHz | NXP Semiconductors

The NXP Semiconductors S9S08EL32F1MTL is an 8-bit microcontroller from the S08EL/S08SL family, integrating an HCS08 (S08) CISC core running at 40 MHz, 32 KB of embedded Flash program memory, 1 KB of SRAM and 512 bytes of EEPROM, all housed in a 28-pin TSSOP package qualified for automotive AEC-Q100 environments. The part exposes 22 general-purpose I/O lines and supports 3.3 V or 5 V operation, with an operating temperature range of -40C to +125C that makes it well suited for under-hood and body electronics. An 8-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data RAM, and a set of on-chip peripherals. The S08 family belongs to NXP's HCS08 architecture lineage - a CISC core optimised for low power, deterministic interrupt response and small code footprint - which itself sits inside the broader category of embedded microcontrollers within the larger hierarchy: microcontroller -> embedded processor -> semiconductor IC. Compared with 16-bit and 32-bit Cortex-M devices, the S08 trades raw compute throughput for predictable behaviour, lower cost and a much simpler toolchain. Key features of the S9S08EL32F1MTL include the on-chip Slave LIN Interface Controller (SLIC), a 16-channel 10-bit ADC with 2.5 us conversion time and internal bandgap reference channel, two analog comparators (ACMPx), PWM, WDT, LVD, POR, SCI, SPI and I2C peripherals. The integrated SLIC block is purpose-built for LIN slave nodes in automotive body networks, offloading LIN protocol handling from the CPU. The combination of SLIC and 22 GPIOs in a TSSOP-28 footprint allows engineers to build a complete LIN slave node - including voltage sense, current sense, temperature sensor and actuator drive - without external protocol ICs. Typical applications include automotive body control modules (BCMs), HVAC actuators and blowers, seat controllers, mirror modules, smart LED lighting drivers, LIN slave sensor nodes, and low-cost industrial control boards. The wide 5V supply tolerance also supports legacy 5V industrial architectures. When designing with this part, note that the 28-pin TSSOP package offers limited pin budget; plan pin allocation carefully between SLIC, ADC and GPIO functions. Always include a 0.1 uF decoupling capacitor near VDD, place the external oscillator close to the EXTAL/XTAL pins, and follow NXP's reference layout for SLIC-enabled LIN slaves. This page synthesises distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet.

USD $3,15 В наличии
S9S08LG32J0CLH - 8-bit MCU, 32KB Flash, 40MHz, LCD | NXP
S9S08LG32J0CLH

S9S08LG32J0CLH - 8-bit MCU, 32KB Flash, 40MHz, LCD | NXP

The NXP Semiconductors S9S08LG32J0CLH is an 8-bit S08 microcontroller in the MC9S08LG32 family that integrates 32KB of on-chip Flash, operates at up to 40 MHz CPU bus frequency, and is qualified to AEC-Q100 automotive standards over a -40°C to +85°C temperature range. It is housed in a 64-pin LQFP package (10x10 mm, 0.5 mm pitch) and is designed to drive segment LCD panels of up to 296 segments through an integrated LCD driver. What is an 8-bit LCD microcontroller? It is a single-chip mixed-signal controller that combines a small CPU, non-volatile program storage, RAM, peripherals, and a segment LCD driver on one die. In the broader hierarchy, it sits under: microcontroller (MCU) -> embedded controller -> system-on-chip -> semiconductor. The S08 core family is widely deployed in cost-sensitive, deterministic industrial and automotive applications because it offers predictable interrupt latency, low power modes, and long-term NXP/Freescale supply continuity. Key features include 32KB of Flash program memory, 2KB of RAM, 39 general-purpose I/O pins, an internal oscillator supporting 2.7 V to 5.5 V operation, multiple timers (MTIM, RTI, PWM), ADC, SCI/SPI/IIC communication, and an on-chip LCD driver with backplane and front-plane pins. According to the NXP datasheet (MC9S08LG32 Series, Rev. 10), the device integrates an HCS08 CPU at up to 40 MHz, supports background debug mode (BDM) for in-circuit emulation, and provides a robust peripheral set tailored to segment-LCD human-machine interface nodes. The architecture uses an enhanced S08 Harvard-style core with a 16-bit index register and stack pointer, a hardware multiplier, and flexible low-power STOP/WAIT modes that make battery-operated meters feasible. The LCD driver supports up to 8 backplanes and 39 frontplanes and is configurable through internal charge-pump and contrast-control registers. Typical applications include electric meters, home appliances, HVAC control panels, entry-level automotive instrument clusters, white goods HMI, and any segment-LCD front-panel node where AEC-Q100 grade and a 5 V supply rail are required. A common pattern is to pair the MCU with a low-cost segment display and a few buttons to replace electromechanical control boards. A key design consideration is that the integrated LCD driver draws substantial current when the charge pump is active; disabling unused segments and tuning the frame frequency can significantly reduce average power. For multi-drop 5 V industrial buses, the SCI peripheral supports RS-232/RS-485 transceivers, while the IIC bus is well suited to EEPROM, RTC, and sensor slaves. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on any single distributor or manufacturer page.

USD $3,78 В наличии
S9S08LG32J0CLK - 40MHz 8-Bit 32KB Flash MCU | NXP
S9S08LG32J0CLK

S9S08LG32J0CLK - 40MHz 8-Bit 32KB Flash MCU | NXP

NXP S9S08LG32J0CLK is an 8-bit HCS08 automotive-qualified microcontroller with a 40 MHz CPU, 32 KB flash memory, 39 I/O ports, and an 80-pin LQFP package measuring 14 x 14 mm. The device operates from 2.7 V to 5.5 V across a -40 °C to +85 °C temperature range, making it suitable for demanding embedded control and display systems. A microcontroller is a programmable integrated circuit that combines a CPU core, nonvolatile program memory, working memory, input/output ports, and embedded peripherals on one semiconductor device. The S08 family belongs to the broader hierarchy of microcontroller, embedded processor, computer control IC, and semiconductor. It executes firmware to monitor sensors, operate user interfaces, sequence actuators, and manage system behavior without a separate host processor. Verified features include an 8-bit HCS08 central processing unit, operation to 40 MHz, 32 KB organized as 32K x 8 flash, 39 I/O ports, and support for liquid-crystal displays with as many as 296 segments. The MCU is identified as automotive qualified and uses a flexible 5 V segment-LCD architecture suited to industrial and vehicle-related control panels. The MC9S08LG family provides both 5 V segment-LCD LG32 and LG16 devices with improved performance and flexible pin functionality. This model combines a relatively high 40 MHz clock speed with dedicated display-oriented I/O, enabling compact control platforms that need local display feedback, keypad scanning, sensing, and communication functions. Typical uses include electric meters, home appliances, HVAC systems, and entry-level instrument clusters. Its 32 KB flash capacity provides room for embedded control firmware, while the 39-port count supports multiple external sensing and actuator connections. The 80-LQFP package also offers ample physical pins compared with compact surface-mount MCU packages. Designers should verify every peripheral, electrical limit, multiplexing option, and pin function against the manufacturer datasheet before layout or firmware release. Decoupling, programming-interface access, LCD segment routing, unused-pin treatment, and mixed 3.3 V or 5 V system conditions require board-level review. This page consolidates verified lifecycle, package, frequency, memory, interface, and sourcing information while clearly separating unavailable technical and commercial values. It also compares candidate family variants and explains why an apparent alternative must not be treated as drop-in unless both footprint and pin-level compatibility are proven.

Запрос цены В наличии
S9S08LG32J0VLF - 40MHz 32KB Flash Automotive MCU | NXP
S9S08LG32J0VLF

S9S08LG32J0VLF - 40MHz 32KB Flash Automotive MCU | NXP

The NXP Semiconductors S9S08LG32J0VLF is an 8-bit S08 microcontroller with a 40 MHz CPU, 32 KB of Flash memory, 39 I/O ports, and operation from a 2.7 V to 5.5 V supply in a 48-LQFP 7 x 7 mm package. It is identified as an automotive-qualified device with an operating temperature range of -40°C to +105°C. An S08 microcontroller is an 8-bit embedded-control IC designed for supervisory, metering, appliance, HVAC, and instrument-cluster functions. The S08 CPU executes firmware from embedded Flash while using peripherals such as LCD segment control, timers, communication interfaces, and general-purpose I/O to monitor and control external systems. The MC9S08LG family supports LCD devices with up to 296 segments. The principal verified features include an 8-bit HCS08 CPU operating up to 40 MHz, 32 KB Flash, 39 I/O ports, a 2.7 V to 5.5 V supply range, and a 48-pin LQFP package. The part is suited to applications where a compact, low-pin-count control platform must combine LCD drive capability with embedded nonvolatile firmware storage. The S9S08LG32J0VLF is specifically associated with 5 V segment LCD applications, including electric metering, home appliances, HVAC systems, and entry-level instrument clusters. Its 39 available I/O ports provide connection flexibility for sensing inputs, control outputs, and communication functions in a compact embedded design. Because this is an automotive-qualified MCU, engineers should preserve the manufacturer’s recommended operating limits, decoupling, clock, reset, and I/O layout practices. The 48-LQFP footprint is a gull-wing surface-mount package, and the complete pin names, memory map, electrical limits, and application requirements must be checked against the official manufacturer datasheet before PCB release. This page consolidates the verified NXP product information, distributor specifications, and practical selection considerations. It distinguishes confirmed attributes from information that still requires datasheet confirmation and avoids treating generic cross-reference results as guaranteed drop-in replacements.

Запрос цены В наличии
S9S08LG32J0VLH - 40MHz 32KB Flash LCD MCU | NXP
S9S08LG32J0VLH

S9S08LG32J0VLH - 40MHz 32KB Flash LCD MCU | NXP

The NXP Semiconductors S9S08LG32J0VLH is an 8-bit S08 microcontroller with a 40 MHz CPU, 32 KB of Flash memory, and a 64-pin LQFP package. It supports a 2.7 V to 5.5 V supply range, is automotive qualified, and is designed for LCD-driven industrial and automotive systems. The integrated MCU architecture combines an 8-bit HCS08 CPU, LCD segment-drive capability, on-chip flash, and flexible I/O in one controller. An LCD MCU is a microcontroller optimized for display applications rather than only general-purpose digital control. The S08 LG family is used where a product must drive segment LCDs while also acquiring inputs, running control logic, and communicating with external equipment. The S9S08LG32J0VLH supports up to 296 LCD segments according to the verified product data, making it relevant to meters, appliances, HVAC equipment, and instrument clusters. Key verified features include a 40 MHz operating frequency, 32 KB Flash storage, 39 I/O ports, and operation from 2.7 V to 5.5 V. The automotive-qualified temperature range is -40°C to +105°C. These characteristics make the device suitable for embedded control systems requiring moderate processing speed, nonvolatile program storage, and direct LCD output without a separate display controller. The S08 CPU provides an 8-bit processing platform with on-chip in-circuit emulation support. The LCD segment outputs reduce the need for external display-driver circuitry, while the 64-LQFP package exposes the MCU resources needed for sensors, switches, communication lines, and control outputs. Exact RAM, peripheral, electrical-limit, and timing values not present in the verified data are left unspecified rather than inferred. Typical applications include electric meters, home appliances, HVAC systems, and entry-level instrument clusters. In these systems, the MCU can scan inputs and update LCD segments while executing embedded control functions. The 40 MHz clock provides processing margin for keypad scanning, measurement routines, state-machine control, and communication tasks, subject to the final firmware architecture and peripheral requirements. Designers should verify the complete NXP datasheet and device characterization before release, especially LCD segment allocation, pin multiplexing, oscillator configuration, automotive qualification requirements, and supply sequencing. This page combines verified distributor and manufacturer information with application guidance and explicitly identifies parameters that require confirmation from the full datasheet.

USD $2,84 В наличии
S9S08LG32J0VLK - 32KB Flash LCD 8-bit MCU | NXP/Freescale | Auto
S9S08LG32J0VLK

S9S08LG32J0VLK - 32KB Flash LCD 8-bit MCU | NXP/Freescale | Auto

The NXP/Freescale S9S08LG32J0VLK is an 8-bit S08 microcontroller with 32 KB of program Flash, a 40 MHz HCS08 CPU core, and an integrated segment LCD driver capable of driving up to 296 LCD segments, housed in an 80-pin LQFP (14x14 mm) package. It is rated for -40C to +105C operation and qualified for automotive segments such as electric metering, home appliances, HVAC controls, and entry-level instrument clusters. Supply voltage is 2.7 V to 5.5 V with 32 KB (32K x 8) Flash and approximately 2 KB of RAM, plus a 40 MHz bus clock. Background knowledge: An 8-bit microcontroller (MCU) is a single-chip computing system containing a CPU, on-chip memory, and peripherals. The HCS08 (S08) is Freescale/NXP's enhanced 8-bit architecture that succeeds the HC08 with C-friendly instructions, hardware multiply, and lower-power modes. Segment LCD MCUs add dedicated glass-driving waveforms, charge pumps and contrast control, eliminating external LCD driver ICs in metering and appliance HMIs. The MC9S08LG family belongs to the 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC hierarchy. Key features include an integrated LCD driver with up to 296 segments and built-in charge pump supporting up to 7x bias, multiple timers (MTIM, FTM), an analog-to-digital converter (ADC), and serial communication peripherals (SCI, SPI, I2C). On-chip in-circuit emulator (ICE) and boundary scan (JTAG) simplify debug, while Flash security bits protect firmware IP. Technical depth: The S08 core uses a von Neumann architecture with a 16-bit address bus and 8-bit data path, supporting C-friendly multiply/divide and BDM (Background Debug Mode). The internal LCD charge pump generates bias voltages from a single supply and resistor bias networks can be selected to reduce BOM. Multiple low-power modes (Stop, Wait, Run) with sub-µA sleep currents enable battery-backed designs. Typical applications include single-phase and multi-phase electric meters, gas and water meters, white-goods HMIs (washers, ovens, microwaves), HVAC control boards, automotive instrument clusters, and entry-level point-of-sale terminals. Designers benefit from NXP's CodeWarrior and S08 Eclipse toolchain plus FreeRTOS-style real-time libraries. Design consideration: Maintain adequate decoupling (100 nF + 4.7 µF ceramic) within 5 mm of VDD pins, follow the datasheet's charge-pump capacitor recommendation for stable LCD contrast across -40C to +105C, and respect the package's thermal resistance when sizing PCB copper area. This page synthesizes distributor pricing, drop-in alternatives from the same MC9S08LG family and the broader S08 portfolio, and practical design notes not found in a single manufacturer datasheet view.

USD $3,32 В наличии
S9S08QD2J1MSC - 8-bit S08 MCU, 2KB Flash, 16MHz | NXP
S9S08QD2J1MSC

S9S08QD2J1MSC - 8-bit S08 MCU, 2KB Flash, 16MHz | NXP

The NXP S9S08QD2J1MSC is an 8-bit S08 microcontroller featuring a 2KB Flash program memory, 16MHz core clock, and 4 GPIOs, housed in an 8-pin SOIC package. It belongs to the cost-effective MC9S08QD family, the lowest-end member of the S08 8-bit microcontroller architecture, targeted at automotive and industrial cost-sensitive applications. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces on one die. The S08 family is Freescale/NXP's enhanced 8-bit HCS08 architecture using a CISC instruction set with a background debug mode (BDM). It sits in the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Within NXP's portfolio, the S08 line bridges the legacy HC08 architectures and the higher-pin-count ColdFire V1 MCUs, prioritizing low cost and small footprint. The S9S08QD2J1MSC integrates key peripherals including low-voltage detection (LVD), power-on reset (POR), pulse-width modulation (PWM), and a watchdog timer (WDT). Its single-wire background debug mode (BDM) simplifies in-circuit programming and debugging. The 128-byte SRAM and 2KB Flash support small control loops, sensor conditioning, and actuator driving firmware. Operating from 2.7V to 5.5V across an automotive-grade -40C to +125C temperature range, this device is engineered for harsh-environment applications. Its 16MHz bus clock and HCS08 CISC core deliver deterministic interrupt response with single-cycle bit manipulation instructions, making it well-suited to real-time control tasks. Typical applications include automotive body electronics (RKE receivers, simple sensor interfaces), industrial control (small appliance controllers, fan/valve drivers), and consumer products (LED drivers, battery chargers). Design with the S9S08QD2J1MSC by budgeting the 4 GPIO pins carefully - assign them to high-value functions such as PWM output, ADC input (via software oversampling on a comparator), and BDM sharing. Place a 100nF decoupling capacitor as close as possible to VDD and bulk capacitance near the IC supply pin. This page synthesizes distributor pricing across Mouser and DigiKey-equivalent channels, drop-in same-package alternatives within the S08 family, and practical design notes that complement the NXP datasheet.

USD $0,89 В наличии
S9S08QD4J1CSCR - 8-Bit S08 MCU 4KB Flash 16MHz SOIC-8 | NXP
S9S08QD4J1CSCR

S9S08QD4J1CSCR - 8-Bit S08 MCU 4KB Flash 16MHz SOIC-8 | NXP

The NXP S9S08QD4J1CSCR is an 8-bit S08 microcontroller unit (MCU) built on the HCS08 CPU core running at 16 MHz, integrating 4 KB of Flash program memory and 256 bytes of RAM in an 8-pin SOIC package. It operates from a 2.7 V to 5.5 V supply and is qualified for automotive applications across the -40 °C to +85 °C industrial/automotive range. The device exposes up to 4 general-purpose I/O pins plus input-only and output-only pins, sharing multiplexed peripheral functions for compact designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and on-chip peripherals (timers, I/O, analog, communications) into one package. Within the hierarchy of embedded computing, 8-bit MCUs sit below 16-bit and 32-bit devices but continue to dominate cost-sensitive and space-constrained designs such as appliance controllers, sensor interfaces, automotive body electronics, and human-machine interface (HMI) modules. The HCS08 architecture used here is NXP's evolution of the legacy HC08 core, adding a BGND instruction and a background debugging system that enables in-circuit breakpoints using only a single wire. Key features of the S9S08QD4J1CSCR include 4 KB (4K x 8) Flash program memory, 256 bytes of RAM, an integrated PWM module, LVD and POR (low-voltage detect and power-on reset), a watchdog timer (WDT), single-wire background debug interface, and 16 MHz CPU throughput from an internal bus. The 2.7 V - 5.5 V operating range supports both 3.3 V and 5 V systems without external level translation, while the wide temperature range suits automotive underhood and industrial environments. The HCS08 core delivers single-byte instructions at up to 16 MHz bus frequency, enabling efficient C and assembly code generation. Internal peripherals include one timer/PWM module with selectable channels, a keyboard interrupt module capable of waking the CPU from stop modes, and on-chip debug logic accessed through the BKGD pin. The small 8-SOIC footprint suits PCBAs where height and board area are constrained but deterministic real-time control is required. Typical applications span automotive body controllers (lighting, simple sensor nodes, brushed-motor drivers), consumer appliance controls (white goods, HVAC blowers, fans), industrial sensor interfaces, low-end remote controls, and small form-factor PCBAs requiring single-wire (BKGD) in-circuit programming for field updates and end-of-line test. NXP's S08 family is widely deployed in millions of automotive nodes, providing long-lifecycle availability. When designing with the S9S08QD4J1CSCR, place a 0.1 µF decoupling capacitor as close as possible to the VDD pin and route the BKGD pin to a header for in-circuit debug. The PTL432LIBQDBZR-compatible LDO is often paired for stable supply rails. Avoid leaving unused I/O pins floating; configure them as outputs or enable internal pull-ups. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. The S9S08QD4J1CSCR remains a popular NXP choice where a small-footprint 8-bit S08 MCU with automotive-grade qualification is needed.

USD $4,42 В наличии
S9S08QD4J1VSC - 8-bit S08 MCU 4KB Flash 16MHz SOIC-8 | NXP
S9S08QD4J1VSC

S9S08QD4J1VSC - 8-bit S08 MCU 4KB Flash 16MHz SOIC-8 | NXP

The NXP Semiconductors S9S08QD4J1VSC is an 8-bit microcontroller from the cost-effective S9S08QD4 family, built on the HCS08 core with a 16 MHz CPU, 4 KB Flash, and 256 B RAM in an 8-pin SOIC package, qualified to AEC-Q100 for automotive applications. The device supports a 2.7V to 5.5V supply voltage and operates over the -40C to +105C automotive temperature range. The MCU integrates an 8-channel 10-bit ADC, two timers (TPM and MTIM), a real-time interrupt (RTI), an internal clock source, and a background debugging system with on-chip breakpoint logic for in-circuit debug. According to the NXP product page, the S9S08QD4J1VSC ships as the V suffix offering in SOIC-8 with NXP's standard tape and reel packaging. A microcontroller (MCU) is an integrated circuit containing a CPU, program memory (Flash/ROM), data memory (RAM), and programmable peripherals on a single silicon die. 8-bit MCUs target cost-sensitive, deterministic embedded applications where processing throughput requirements are modest but reliability and small pin count matter. The HCS08 family sits below 32-bit Cortex-M parts in the NXP automotive hierarchy but offers lower cost, smaller footprints, and simpler toolchains for body electronics, sensor interfaces, and human-machine interface (HMI) nodes. Key differentiating features of the S9S08QD4J1VSC include its automotive AEC-Q100 Grade 2 qualification, 4 KB Flash program memory with security, a 16 MHz bus clock from an internal oscillator that eliminates the external crystal, and a wide 2.7V-5.5V supply that interfaces directly to 3.3V or 5V logic rails. The integrated 10-bit ADC with internal channel selection simplifies sensor reading, and the small SOIC-8 footprint suits space-constrained automotive PCBAs. The S9S08QD4J1VSC implements a HC08-compatible instruction set extended with the BGND instruction, plus a background debugging system that allows single-breakpoint in-circuit debug plus two additional breakpoints in on-chip flash. Internal clock sources include a trimmable internal reference and an FLL-stabilized bus clock, eliminating external crystal cost. Typical applications include automotive body controllers, simple sensor signal conditioning, LIN slave nodes, LED drivers, HVAC actuators, low-end HVAC fan control, automotive rear lighting, and small appliance control. The automotive temperature range and AEC-Q100 qualification make it a strong fit for cabin-mounted and under-hood electronics. Industrial uses include sensor interface modules and basic motor drivers in 24V-bus systems. When designing with this part, plan for a robust decoupling network (100 nF plus 4.7 uF bulk) close to VDD/VSS and follow NXP's recommended PCB layout for SOIC-8 to maintain EMI margins under automotive conducted-noise tests. The S9S08QD4 family is also notable for its low power-down current, which is useful for always-on battery-backed automotive modules. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical automotive design notes not found in the manufacturer datasheet, giving a one-stop comparison view for sourcing and design.

USD $1,31 В наличии
S9S08QD4J2MSC - 8-bit S08 MCU, 4KB Flash, 16MHz, Automotive | NXP
S9S08QD4J2MSC

S9S08QD4J2MSC - 8-bit S08 MCU, 4KB Flash, 16MHz, Automotive | NXP

The NXP S9S08QD4J2MSC is an 8-bit HCS08 microcontroller from the cost-effective MC9S08QD/S9S08QD family, featuring 4KB of Flash, 256 bytes of RAM, and a 16MHz CPU core housed in an 8-pin SOIC package rated for the automotive -40C to +125C temperature range. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip that combines a CPU, memory (Flash for program, RAM for data), and peripherals on a single die. The HCS08 is NXP's enhanced 8-bit core architecture that retains backward compatibility with the legacy HC08 instruction set while adding the BGND instruction, additional breakpoints, and improved debug support. The S08 sits at the entry level of NXP's 8-bit portfolio and is widely used in cost- and power-sensitive automotive body and chassis applications. Key features of the S9S08QD4J2MSC include a 16MHz HCS08 CPU with HC08-compatible instruction set, 4KB (4K x 8) on-chip Flash program memory, 256 bytes of RAM, an on-chip analog-to-digital converter (ADC), timers, keyboard interrupt logic, and a background debug system (BDM) that supports in-circuit debugging plus single and dual breakpoints. The 8-pin SOIC package exposes 4 general-purpose I/O pins, 1 input-only pin, and 1 output-only pin shared with on-chip peripherals such as timers and serial I/O. Architecturally, the device integrates a precision internal oscillator, low-voltage detect (LVD) circuit, and STOP/WAIT low-power modes to support automotive quiescent-current budgets. The Flash is in-application programmable and supports security features to protect proprietary code, making the part suitable for volume-programmed automotive sub-assemblies. Typical applications include automotive body controllers, simple sensor interface modules, wiper and lighting controllers, HVAC actuators, seat and mirror control nodes, and remote keyless entry receivers. Designers choose this part when low pin count, low cost, and AEC-Q100 grade-0 temperature tolerance outweigh the need for advanced peripherals or higher Flash density. When designing with the S9S08QD4J2MSC, allocate sufficient decoupling (typically 100 nF plus bulk capacitance) close to VDD/VSS, follow the datasheet's PCB layout guidelines for the exposed SOIC pad, and validate your code with the Freescale/NXP CodeWarrior or Eclipse-based S08 tool chain before committing to production. This page synthesizes distributor pricing, AEC-Q100-grade temperature information, and practical design notes that go beyond the manufacturer datasheet to help engineers select and qualify the part quickly.

USD $1,14 В наличии