S9S08DZ96F2VLH - 40MHz 96KB Flash CAN MCU | NXP
Артикул: S9S08DZ96F2VLH ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $4.6876 | $4,69 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
S9S08DZ96F2VLH Обзор
A microcontroller is a programmable semiconductor that combines a CPU, memory, and peripherals on one integrated circuit. This S08D device belongs to the 8-bit microcontroller hierarchy, where the CPU processes embedded control tasks and connected peripherals handle communication, timing, data acquisition, and output functions. Its embedded CAN controller makes it suitable for distributed vehicle, industrial, and equipment-control networks, while the LCD driver supports human-interface or display-oriented designs without relying entirely on an external display controller.
The main feature set includes 96 KB of flash for firmware, 6 KB of RAM for working data, 2 KB of EEPROM for nonvolatile parameters, embedded CAN, an LCD driver, and a maximum 40 MHz bus frequency. These resources allow the MCU to combine control logic, communication, and persistent configuration in one package. The 64-LQFP package provides 64 external terminals and is suitable for conventional surface-mount PCB assembly.
S9S08DZ96F2VLH belongs to the S08D family, identified in the retrieved data as an automotive and industrial-oriented 8-bit family with scalable migration and embedded CAN capability. The architecture is intended to balance real-time control with compact code size and low system complexity. Designers should consult the manufacturer datasheet for exact peripheral availability, electrical limits, clock configuration, and pin multiplexing before finalizing a new design.
Typical uses include automotive body and powertrain-adjacent modules, industrial controllers, CAN-connected sensors, equipment interfaces, and compact embedded control products. Because the supplied evidence identifies embedded CAN, LCD driving, flash, RAM, EEPROM, and the 40 MHz bus, these are the strongest application areas for this part. A system requiring additional external memory, different communication protocols, or a different package should be reviewed against the current datasheet.
The principal design consideration is package and pin compatibility. S9S08DZ96F2VLH uses a 64-LQFP footprint, so any substitution must preserve the exact pin arrangement, electrical limits, clock behavior, memory map, and peripheral functions. The retrieved data does not provide a verified alternate manufacturer part, so production sourcing should be based on the NXP ordering information and current manufacturer documentation.
This product summary consolidates the verified NXP product description, distributor listings, package information, and application-relevant details into an engineering-oriented reference. It also identifies where the available evidence is incomplete, rather than estimating technical values, pricing, or replacement specifications that were not supplied.
Аналоги без доработки для S9S08DZ96F2VLH — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с S9S08DZ96F2VLH (тот же форм-фактор и посадочное место) — отличается по Package, Flash Memory, Automotive Qualification, Core, Product Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
S9S08DV128F2CLFR
✅ Прямая замена✓ В наличии
$6.279 / шт.
Открыть даташит →S9S08DV96F2CLL
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →S9S08DZ96F2VLH Максимальные параметры и электрические характеристики
| Product Type | 8-bit microcontroller |
| CPU Core | HCS08 |
| Maximum CPU or Bus Frequency | 40 MHz |
| Flash Memory | 96 KB |
| RAM | 6 KB |
| EEPROM | 2 KB |
| Communication Peripheral | Embedded CAN |
| Display Peripheral | LCD driver |
| Напряжение питания | 3.3 V or 5 V |
| Корпус | 64-LQFP (10 mm x 10 mm) |
| Terminal Count | 64 terminals |
| Тип монтажа | Surface mount |
| Memory Architecture | Harvard architecture |
| Разрядность шины данных | 8-bit |
| Automotive Orientation | Automotive and industrial embedded-control positioning |
| Embedded Emulation and Debug | On-chip emulation/debug |
| Manufacturer | NXP Semiconductors |
| Статус жизненного цикла | Active |
Руководство по цоколевке S9S08DZ96F2VLH в корпусе 64-lqfp (10 mm x 10 mm)
Цоколевка для S9S08DZ96F2VLH (корпус 64-lqfp (10 mm x 10 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для S9S08DZ96F2VLH.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
S9S08DZ96F2VLH подходит для 6 применениеs: Automotive CAN Control Module, Industrial Equipment Controller, CAN-Connected Sensor Node, Human-Interface Control Panel, Embedded Data Logger, Compact Automotive Accessory Controller.
Automotive CAN Control Module
The S9S08DZ96F2VLH fits an automotive CAN control module because the verified feature set combines an HCS08 8-bit core, 40 MHz maximum frequency, embedded CAN, 96 KB flash, and 2 KB EEPROM. The MCU can manage distributed vehicle messages while retaining configuration and calibration values in EEPROM. Its LCD driver may support a local status display, although the exact CAN timing, transceiver, and automotive qualification details must be confirmed from the official datasheet.
Рекомендуется
Industrial Equipment Controller
For an industrial equipment controller, the S9S08DZ96F2VLH provides 96 KB of firmware storage, 6 KB of RAM, and a 40 MHz HCS08 processing core for real-time control tasks. Embedded CAN allows the controller to exchange commands and status with other equipment nodes, while EEPROM can retain calibration and configuration data across power cycles. The 64-LQFP package is suitable for a dedicated surface-mount control board, subject to exact pin and electrical verification.
Рекомендуется
CAN-Connected Sensor Node
The S9S08DZ96F2VLH is appropriate for a compact CAN-connected sensor node when the design needs local control, event handling, and nonvolatile parameters. Its 8-bit HCS08 core operates up to 40 MHz, while 6 KB RAM supports short-term measurement buffering and 96 KB flash stores application firmware. The embedded CAN controller reduces the need for a separate communications IC, although sensor analog circuitry and transceiver selection remain external design elements.
Рекомендуется
Human-Interface Control Panel
The S9S08DZ96F2VLH can support a compact human-interface control panel because the verified feature set includes an LCD driver alongside embedded CAN and substantial internal memory. Firmware can manage buttons, status indicators, menu logic, and communications while using 2 KB EEPROM for persistent settings. The LCD-driver capability should be checked against the intended display interface, including voltage, segment count, timing, and pin multiplexing, because those details are not included in the retrieved snippets.
Рекомендуется
Embedded Data Logger
The S9S08DZ96F2VLH is useful for an embedded data logger that must retain operating parameters while responding to network messages. Its 2 KB EEPROM provides a verified nonvolatile storage area for configuration or event records, while 96 KB flash accommodates application code and 6 KB RAM supports working buffers. In a real design, the engineer must define endurance, write-cycle timing, data retention, and communication protocols from the datasheet rather than assuming generic EEPROM behavior.
Рекомендуется
Compact Automotive Accessory Controller
A compact automotive accessory controller can use the S9S08DZ96F2VLH for local logic, CAN communication, and persistent operating data. The 40 MHz HCS08 core provides timing headroom for debouncing, state-machine execution, and message handling, while the LCD driver can assist with a small diagnostic or status display. The device's suitability for a particular vehicle platform still depends on voltage transients, environmental qualification, CAN transceiver selection, and the exact 64-LQFP pinout.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для S9S08DZ96F2VLH — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | S9S08DV128F2CLFR | S9S08DV96F2CLL |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
Ключевые отличия
- Integrated CAN and LCD-driver functionality (против S9S08DV128F2CLFR)
- Verified memory configuration (против S9S08DV96F2CLL)
- 40 MHz S08D control platform (против S9S08DV128F2CLFR)
- Compact integrated automotive/industrial positioning (против S9S08DV96F2CLL)
Заметки по проектированию
Use the official NXP 64-LQFP land pattern and pin table before routing the PCB. The verified web results identify the package and terminal count but do not provide individual pin names, so power, ground, clock, CAN, LCD, and debug connections must not be inferred from a related S08D part. Keep high-current and clock connections short, preserve the package orientation, and validate the footprint with the exact mechanical drawing.
Plan the 3.3 V or 5 V supply architecture only after checking the exact electrical limits and pin assignments in the NXP datasheet. The retrieved evidence does not identify supply current, voltage tolerances, internal regulators, or decoupling requirements. Follow the manufacturer's recommended power, ground, and decoupling layout, and include appropriate local bulk and bypass capacitance at the device pins. Do not assume that a 3.3 V or 5 V description alone defines the complete power design.
Do not substitute a similar S08D part based only on the family name, package family, or distributor search result. A valid replacement must be checked against the exact 64-LQFP pinout, supply voltage, clock limits, memory map, CAN and LCD functions, EEPROM behavior, and required automotive or industrial qualification. The supplied alternatives search did not verify a fully drop-in replacement, so production substitution should be treated as a controlled engineering review.
Keep CAN routing isolated from sensitive analog or timing paths and follow the electrical requirements of the selected transceiver, termination, and protection network. The MCU's embedded CAN controller does not include the external physical-layer interface. Likewise, the LCD-driver capability requires confirmation of segment count, display voltage, timing, and multiplexed pin assignments. A schematic and layout review against the exact datasheet are necessary before fabrication.
The supplied data confirms a 64-LQFP package but does not provide thermal resistance, maximum junction temperature, or power dissipation limits. Thermal performance must therefore be calculated from the exact operating voltage, current, ambient temperature, PCB copper area, and package data in the official documentation. Do not use the 40 MHz clock frequency as a thermal specification; switching activity and actual load conditions determine dissipated power.
Информация о соответствии
The retrieved product descriptions identify automotive and industrial positioning but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance must be confirmed from the current NXP product documentation and applicable supply-chain documentation.