S9S08DZ96F2MLH - 8-bit S08 MCU, 96KB Flash, CAN | NXP
Артикул: S9S08DZ96F2MLH ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $10.35 | $10,35 |
| 10 | $9.45 | $94,50 |
| 100 | $8.6 | $860,00 |
| 500 | $7.9 | $3.950,00 |
| 1.000 | $7.25 | $7.250,00 |
S9S08DZ96F2MLH Обзор
An 8-bit microcontroller is a single-chip computer that integrates a processor core, program flash, RAM, EEPROM, and peripherals such as timers, serial interfaces, and analog-to-digital converters on one die. Within the embedded systems hierarchy, the S08DZ family sits in the cost-sensitive 8-bit MCU segment, positioned below 16-bit and 32-bit MCUs but differentiated by integrated Controller Area Network (CAN) connectivity, a feature historically reserved for larger devices.
Key features include the industry-first integration of embedded CAN, embedded EEPROM, and on-chip emulation/debug in an 8-bit MCU family. The 96 KB flash supports field reprogramming, while the 2 KB EEPROM retains calibration data through power cycles without external memory. The 40 MHz S08 core delivers efficient execution for automotive body, gateway, and node applications. Automotive qualification and the -40C to +125C temperature range support underhood and harsh-environment deployments.
Architecturally, the S08 core is an enhanced, fully static HCS08 CPU with a background debug module that provides non-intrusive, on-chip emulation without consuming pin or memory resources. This reduces development cost by eliminating the need for bond-out or emulation chips in automotive tier-1 tooling.
Typical applications include automotive body control modules, seat and door controllers, HVAC nodes, CAN-gateway sub-nodes, and industrial CAN networks where a low-cost 8-bit device must communicate on a CAN 2.0 bus.
Design consideration: verify flash and EEPROM endurance requirements against your application write budget, and confirm the exact 64-pin LQFP pin assignment against the NXP reference manual before layout.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для S9S08DZ96F2MLH — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с S9S08DZ96F2MLH (тот же форм-фактор и посадочное место) — отличается по Package, RAM, Core Processor, Instruction Set, Program Memory Size.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC9S08DZ96CLH
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$6.21 / шт.
Открыть даташит →MC9S08DZ32AMLH
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
Уточнить цену
Открыть даташит →MC9S08DV96CLF
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$5.94 / шт.
Открыть даташит →S9S08DZ60F1CLH
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$5.95 / шт.
Открыть даташит →S9S08DZ48F1CLH
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$0.8 / шт.
Открыть даташит →S9S08DZ32F1MLF
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.21 / шт.
Открыть даташит →S9S08DZ96F2MLH Максимальные параметры и электрические характеристики
| Core | S08 (HCS08), 8-bit |
| Number of Cores | 1 |
| Максимальная тактовая частота | 40 MHz |
| Program Memory Size | 96 KB Flash |
| Data EEPROM Size | 2 KB |
| Диапазон рабочих температур | -40C to +125C |
| CAN | Embedded CAN (CAN 2.0) |
| On-Chip Debug | On-chip emulation/debug (background debug) |
| Корпус | LQFP-64 (QFP 64, square, LFQFP) |
| Number of Terminals | 64 |
| Terminal Form | Gull Wing |
| Тип монтажа | Surface Mount |
| Qualification | Automotive Qualified (AEC-Q100 grade per NXP S9S08DZ family) |
| Program Memory Width | 8 bit |
| Packaging | Tray |
Руководство по цоколевке S9S08DZ96F2MLH в корпусе lqfp-64 (qfp 64, square, lfqfp)
Цоколевка для S9S08DZ96F2MLH (корпус lqfp-64 (qfp 64, square, lfqfp)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для S9S08DZ96F2MLH.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
S9S08DZ96F2MLH подходит для 6 применениеs: Automotive Body Control Modules, CAN Gateway Sub-Nodes, HVAC and Climate Control Nodes, Seat and Door Module Controllers, Industrial CAN Sensor Nodes, Low-Cost Embedded CAN Development.
Automotive Body Control Modules
The S9S08DZ96F2MLH fits body control modules where dozens of switches, lamps, and motors must be monitored and driven over a CAN bus at minimal cost. Its embedded CAN controller removes the need for an external CAN peripheral IC, the 96 KB flash accommodates a full switch-monitoring and diagnostics firmware image, and the 2 KB EEPROM stores per-vehicle configuration and fault logs that survive battery disconnect. Automotive qualification and the -40C to +125C range cover passenger-compartment and near-engine mounting locations. With on-chip debug, tier-1 developers can iterate firmware in-system without bond-out hardware, shortening validation cycles in cost-sensitive body electronics programs.
Рекомендуется
CAN Gateway Sub-Nodes
In vehicles with multiple CAN buses, the S9S08DZ96F2MLH serves as a low-cost sub-node that filters, translates, and relays messages between a central gateway and local actuators. The 40 MHz S08 core provides adequate bandwidth for CAN 2.0 message handling, while the 96 KB flash holds protocol stacks for J1939-class or proprietary message sets. Embedded EEPROM retains node addressing and filtering tables across power cycles, and the on-chip debug interface supports in-vehicle reprogramming during development. Compared with 16-bit or 32-bit gateways, this 8-bit device cuts cost while keeping CAN connectivity integrated on the same die, reducing PCB area and component count.
Рекомендуется
HVAC and Climate Control Nodes
Automotive HVAC controllers benefit from the S9S08DZ96F2MLH's blend of EEPROM-backed calibration data, CAN connectivity for zone-request messages, and sufficient flash for actuator control and diagnostic code. The device monitors temperature sensor inputs, drives blower and blend-door motors through PWM or H-bridge drivers, and reports status on the vehicle CAN bus. Its -40C to +125C qualification covers under-dash and engine-bay sensor locations. The embedded EEPROM eliminates an external serial EEPROM component, trimming bill of materials - a meaningful saving across high-volume vehicle programs where every cent of electronics cost is scrutinized.
Рекомендуется
Seat and Door Module Controllers
Seat memory modules and door controllers use the S9S08DZ96F2MLH to read switch matrices, drive motor positions via relays or H-bridges, and exchange commands on LIN/CAN-style in-vehicle networks. The 2 KB EEPROM stores seat position presets and user profiles that must persist through battery removal - a core requirement NXP designed the embedded EEPROM for. The 96 KB flash leaves room for position encoding, stall detection, and anti-pinch firmware. Automotive qualification plus 125C support suits door-mounted electronics exposed to solar loading, and the 64-pin LQFP provides enough general-purpose I/O for a full switch matrix without external port expanders.
Рекомендуется
Industrial CAN Sensor Nodes
Beyond automotive, the S9S08DZ96F2MLH serves industrial CAN (CANopen-style) sensor and actuator nodes where an 8-bit MCU is sufficient and cost matters. The integrated CAN controller with the industrial -40C to +125C capability supports factory-floor installations, and the 2 KB EEPROM stores node IDs, scaling factors, and calibration constants per Device-profile conventions. The 96 KB flash accommodates a compact protocol stack plus sensor compensation algorithms. On-chip debug simplifies field tooling, and the widely available 64-LQFP footprint keeps second-source board layouts simple. For new industrial designs needing higher throughput, evaluate NXP's 32-bit Kinetis parts, but for pure CAN I/O nodes this 8-bit device remains economical.
Рекомендуется
Low-Cost Embedded CAN Development
The S9S08DZ96F2MLH is a strong training and prototyping platform for embedded CAN systems because NXP integrated on-chip emulation and background debug into the die - the industry first for an 8-bit CAN MCU family, per NXP's announcement. Developers can single-step, break, and trace without external bond-out pods, using only the single-wire background debug pin. The 96 KB flash supports repeated re-flashing during coursework or proof-of-concept work, while the 2 KB EEPROM demonstrates non-volatile parameter storage. University labs and small engineering teams can build complete CAN nodes - MCU, transceiver, and physical layer - on a two-layer board with this device.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для S9S08DZ96F2MLH — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S08DZ96CLH | MC9S08DZ32AMLH | MC9S08DV96CLF | S9S08DZ60F1CLH | S9S08DZ48F1CLH |
|---|---|---|---|---|---|---|
| Package | LQFP-64 | LQFP-64 - same | LQFP-64 - same | LQFP-64 - same | LQFP-64 - same | LQFP-64 - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | S08, 8-bit | S08, 8-bit | S08, 8-bit | S08, 8-bit | S08, 8-bit | S08, 8-bit |
| Program Flash | 96 KB | 96 KB | 32 KB | 96 KB | 60 KB | 48 KB |
| Integrated CAN | Yes | Yes | Yes | Yes (DV series CAN variant) | Yes | Yes |
| Max Clock Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Temperature Range | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| Automotive Qualified | Yes | Yes | Yes | Yes | Yes | Yes |
Ключевые отличия
- Largest flash in the 64-LQFP S08DZ drop-in family (против S9S08DZ60F1CLH)
- Embedded EEPROM eliminates external serial EEPROM (против MC9S08DV96CLF)
- Trade-off: 8-bit compute ceiling (против MK40DX64VLH7)
Заметки по проектированию
Estimated: automotive modules must tolerate load-dump and cranking transients on the supply rail. The S9S08DZ96F2MLH requires a regulated supply within its datasheet VDD range - consult the NXP reference manual for exact limits (exact values not present in verified data). Use a qualified automotive LDO or SBC (e.g., MC33989 family) upstream, with bulk and ceramic decoupling at each VDD pin pair per the datasheet layout guidance. Add reverse-polarity and transient protection at the module input to meet OEM load-dump requirements.
Place 0.1 uF ceramic decoupling capacitors at every VDD/VSS pin pair of the 64-LQFP, as close to the pins as possible, and follow the NXP datasheet power-distribution recommendations. Route the CANRX/CANTX traces to the external transceiver (TJA1050-class) with short, matched runs and place the split termination per the transceiver datasheet. Keep the background debug pin accessible on a header or test pad - it is required for programming and on-chip emulation during production and field service.
Do not assume pin assignments from other S08 family variants: pin multiplexing on the 64-LQFP DZ96 differs from the DV and older HCS08 families. Always verify port-to-peripheral mapping in the NXP S08DZ reference manual before committing the layout. When migrating from 32 KB or 60 KB DZ variants to this 96 KB part, confirm flash page boundaries used by your bootloader, since erase-page organization can differ with memory size. EEPROM endurance is finite - budget write cycles in the calibration-update scheme.
Информация о соответствии
NXP lists the part as Active with environmental quality documentation available on the official product page; exact RoHS/REACH/lead-free status must be confirmed from the NXP environmental page for this orderable part number.
