Микроконтроллеры

Товары (18756)

BSC9131NLE7HHHB - 800MHz e500 SoC | NXP
BSC9131NLE7HHHB

BSC9131NLE7HHHB - 800MHz e500 SoC | NXP

The NXP Semiconductors BSC9131NLE7HHHB is a QorIQ Qonverge system-on-chip with one 32-bit 800 MHz PowerPC e500 core, an 800 MHz StarCore SC3850 DSP, and MAPLE-B2F accelerator processing, housed in a 520-FCBGA package measuring 21 x 21 mm. It includes DDR3 memory support, security features, and a specified 0°C to 105°C temperature range. These headline values identify it as a highly integrated communications and industrial processor rather than a general-purpose microcontroller. A QorIQ Qonverge SoC combines a general-purpose processor core, a digital signal processor, dedicated accelerator logic, memory controllers, and communications-oriented interfaces on one semiconductor device. The BSC9131 combines Power e500 and StarCore SC3850 core technologies with MAPLE-B2F specialist DSP acceleration. This hierarchy places it between a microprocessor and a specialized communications processor, allowing control-oriented code and time-critical signal processing to share one integrated platform. Key features include the single 800 MHz e500 processor core, the 800 MHz StarCore DSP, and MAPLE-B2F accelerator support. The device also provides DDR3 memory support, security capabilities identified by NXP as SEC, and a 0°C to 105°C operating-temperature specification. Its 520-ball flip-chip BGA package supports dense board-level integration, although its 520 contacts and 21 x 21 mm body require careful escape routing and board-layout verification. The architecture addresses workloads that require more specialized processing than a conventional microcontroller can provide. The PowerPC e500 core can execute operating-system-level control software, while the StarCore SC3850 core and MAPLE-B2F accelerator target DSP and communications tasks. Dividing these workloads across dedicated engines can improve suitability for base-station, packet-processing, voice-over-IP, industrial-control, and defense-related equipment, subject to software and memory-system support. Typical applications include small-cell base stations, enterprise VoIP platforms, smart-grid control systems, military and defense equipment, and industrial systems. The integrated 800 MHz e500 core, 800 MHz StarCore DSP, MAPLE-B2F acceleration, and DDR3 support align particularly well with embedded communications designs that need both general-purpose control and specialized digital signal processing in one package. The primary design constraint is package complexity. A 520-FCBGA device requires a matching land pattern, controlled escape routing, power and ground-plane integrity, and assembly-process capability. Software teams must also verify DDR3 topology, boot requirements, clocking, security configuration, thermal performance, and peripheral availability for the exact product revision before committing to production hardware. This page consolidates the verified manufacturer and distributor identity, package, processor architecture, memory support, operating range, lifecycle information, and sourcing links for BSC9131NLE7HHHB. It also distinguishes verified drop-in alternatives from unsupported cross-reference candidates so engineers can avoid assuming that a similar processor is electrically and mechanically interchangeable.

Запрос цены Контакты
BSC9131NLN1HHHB - 800MHz e500 Processor | NXP
BSC9131NLN1HHHB

BSC9131NLN1HHHB - 800MHz e500 Processor | NXP

The NXP BSC9131NLN1HHHB is a QorIQ Qonverge system-on-chip with a 32-bit 800 MHz PowerPC e500 microprocessor core and an 800 MHz StarCore DSP in a 520-FCBGA package. The verified distributor data identifies one core, a 21 mm by 21 mm package, MAPLE-B2F acceleration, integrated IFC, DDR3 support, and a 0°C to 105°C temperature range. A system-on-chip, or SoC, integrates a processor core, memory interfaces, communications peripherals, and optional accelerators into one semiconductor package. Within the QorIQ product hierarchy, the BSC9131 combines the PowerPC e500 CPU, a StarCore DSP, MAPLE-B2F acceleration, IFC, and DDR3 support. This integration allows communications and embedded systems to execute control, signal-processing, and network workloads with one highly integrated device. The verified product data highlights an 800 MHz e500 CPU, an 800 MHz StarCore DSP, MAPLE-B2F acceleration, integrated IFC, and DDR3 memory support. These functions suit workloads that require dedicated digital signal processing alongside general-purpose network processing. The 520-FCBGA package provides a large, complex interconnect surface, so PCB escape routing, power delivery, thermal design, and manufacturing validation require careful planning. BSC9131NLN1HHHB is positioned for small-cell base stations, enterprise VoIP, smart-grid control, military and defense systems, and industrial applications. In these systems, the CPU can manage protocol and control tasks while the StarCore DSP accelerates signal-processing workloads. MAPLE-B2F acceleration provides another dedicated compute resource, while IFC and DDR3 interfaces support connected equipment and memory-intensive data paths. A critical design consideration is that a 520-FCBGA is not a low-pin-count or low-risk package. Power rails, high-speed memory routing, thermal paths, and ball-assignment verification must follow the official device documentation and validated hardware design. Do not infer compatible regulators, memory devices, or peripheral ICs from general processor specifications without checking the manufacturer data. This page consolidates verified distributor specifications, sourcing information, application context, and design cautions for BSC9131NLN1HHHB. It does not substitute for the complete NXP hardware manual, reference design, package drawing, or board-support package. Pricing reflects the supplied market observations as of 2026-10-23 and should be reconfirmed before procurement.

Запрос цены Контакты
BSC9131NSE1KHKB - QorIQ Qonverge SoC, 1GHz e500 + SC3850 | NXP
BSC9131NSE1KHKB

BSC9131NSE1KHKB - QorIQ Qonverge SoC, 1GHz e500 + SC3850 | NXP

The NXP Semiconductors BSC9131NSE1KHKB is a QorIQ Qonverge heterogeneous SoC combining a 1 GHz PowerPC e500 core and a 1 GHz StarCore SC3850 DSP core in a 520-pin FCBGA (21x21) package, manufactured on a 45 nm CMOS process. It integrates a MAPLE-B2F baseband accelerator, DDR3/DDR3L memory controller, IFC, SEC 4.4 security engine, and dual GbE networking for small-cell base stations. The device is part of the QorIQ Qonverge BSC9131 family, designed for high-performance low-power baseband processing. A heterogeneous multiprocessor SoC integrates two or more different processor core types (in this case a PowerPC host and a DSP) plus dedicated hardware accelerators on a single die. This architecture is widely used in wireless base stations where one core runs control-plane OS tasks (Linux/VxWorks) while the DSP executes PHY-layer signal processing, allowing deterministic real-time DSP latency alongside flexible application code on the host CPU. The BSC9131NSE1KHKB specifically targets small cell, enterprise femtocell, smart grid, military/defense, and industrial control applications per NXP product documentation. Key features include a dual-core heterogeneous compute complex (1 GHz e500 at 32-bit + 1 GHz SC3850 DSP), a MAPLE-B2F turbo/Viterbi baseband accelerator, DDR3/DDR3L memory controller with ECC support, integrated SEC 4.4 security engine, integrated flash controller (IFC), dual GbE, 0-105C extended operating temperature grade, and 520-ball FCBGA packaging. Per NXP product documentation, the device is targeted at small cell base station, enterprise VoIP, smart grid control, military/defense, and industrial control applications. The BSC9131 architecture combines an e500mc-style host processor for control plane and an SC3850 DSP for PHY processing, allowing designers to run a real-time OS (Linux or VxWorks) on the e500 while dedicating the SC3850 to deterministic baseband DSP. The MAPLE-B2F accelerator offloads Turbo/Viterbi convolutional decoding, freeing DSP cycles for higher-layer PHY tasks and reducing overall system power. Typical applications include LTE/HSPA/WiMAX small cell base stations (femtocell, picocell, microcell), enterprise VoIP gateways, smart grid protection and control equipment, military/defense radio platforms, and industrial real-time control systems. The BSC9131 is typically used as the main baseband SoC with companion RF transceivers and analog front ends. When designing with this device, ensure proper thermal management via PCB copper pours and thermal vias to the FCBGA substrate. Use ECC-enabled DDR3L with matched trace lengths for the DDR interface, and validate boot configuration via the IFC/serial boot path. Power sequencing must follow NXP's reference design for proper core and I/O rail ramp order. This page synthesizes distributor inventory, drop-in NXP Qonverge alternatives, and practical design guidance not collated in the manufacturer datasheet, helping engineers evaluate lifecycle risk and second-source options for end-of-life planning.

Запрос цены Контакты
BSC9131NSN1KHKB - QorIQ Qonverge SoC, 800MHz Dual-Core | NXP
BSC9131NSN1KHKB

BSC9131NSN1KHKB - QorIQ Qonverge SoC, 800MHz Dual-Core | NXP

The NXP (formerly Freescale) BSC9131NSN1KHKB is a QorIQ Qonverge system-on-chip (SoC) integrating a 1 GHz StarCore SC3850 DSP core, a 1 GHz PowerPC e500 processor core, and a MAPLE-B2F baseband accelerator in a single 520-pin FCBGA (21x21 mm) package. It is part of the BSC9131 family targeting small-cell base stations, enterprise VoIP gateways, smart-grid infrastructure, military/defense radios, and industrial control applications. According to NXP product documentation, the device combines heterogeneous compute elements to handle both PHY-layer digital signal processing and control-plane networking tasks on one die. A QorIQ Qonverge SoC is a heterogeneous multiprocessor device that combines a general-purpose communications control CPU (PowerPC e500) with one or more DSP cores (StarCore) and dedicated hardware accelerators (such as MAPLE for LTE turbo/viterbi decoding) on a single chip. The QorIQ family sits within NXP's broader communications processor portfolio, which itself belongs to the wider class of embedded microprocessors and SoCs used in networking infrastructure. This category hierarchy matters because small-cell base stations increasingly demand deterministic DSP throughput alongside flexible L2/L3 packet processing, which single-core architectures cannot deliver efficiently. Key features of the BSC9131NSN1KHKB include: dual heterogeneous compute cores running at up to 1 GHz each, integrated MAPLE-B2F LTE baseband accelerator for PHY offload, DDR3 memory controller with ECC support, integrated flash controller (IFC) for NAND/NOR boot, and a wide range of high-speed serial interfaces (SerDes, PCIe, SGMII) for backhaul and radio connectivity. The device is rated for 0 C to 105 C ambient operation and is offered in the 520-FCBGA package suitable for industrial-grade base-station boards. The architecture pairs a 32-bit PowerPC e500 core (running control-plane protocols and Linux) with a 32-bit StarCore SC3850 VLIW DSP (running PHY DSP code), connected via a shared system bus. The MAPLE-B2F accelerator handles forward error correction, freeing DSP cycles for channel estimation, FFT, and modulation/demodulation. This partitioning reduces total power consumption versus discrete CPU+DSP+FPGA designs and simplifies board layout by eliminating inter-chip high-speed links. Typical applications include small-cell LTE/eNodeB base stations, enterprise VoIP media gateways, smart-grid control and monitoring equipment, military/defense tactical radio platforms, and industrial machine-to-machine gateways. The combination of deterministic DSP, control CPU, and on-chip LTE accelerator makes the BSC9131 family particularly suitable for compact, low-power small-cell designs where board area and BOM cost are at a premium. When designing with this device, engineers should pay attention to power-rail sequencing (the SoC requires multiple voltage domains with strict ramp order), DDR3 PCB layout (length-matched, impedance-controlled traces with proper decoupling), and thermal management at the 520-FCBGA top-side cooling solution. Note that this part is documented by NXP as End of Life, so long-lifecycle designs should evaluate remaining inventory and second-source options carefully. This page synthesizes distributor pricing, lifecycle status, and design considerations not found in any single manufacturer document, providing engineers and procurement teams with a consolidated reference for evaluating the BSC9131NSN1KHKB against modern alternatives.

Запрос цены Контакты
BSC9131NSN7KHKB - 800MHz e500 SoC | NXP Semiconductors
BSC9131NSN7KHKB

BSC9131NSN7KHKB - 800MHz e500 SoC | NXP Semiconductors

The NXP Semiconductors BSC9131NSN7KHKB is a highly integrated QorIQ Qonverge network processor based on one 32-bit PowerPC e500 core operating at 800 MHz, packaged in a 520-FCBGA (21 x 21 mm). It also incorporates a StarCore SC3850 DSP at 1 GHz and a MAPLE-B2F specialist DSP accelerator, providing heterogeneous processing for demanding communications workloads. A QorIQ Qonverge SoC is a system-on-chip that integrates one or more processor cores, specialized accelerators, memory interfaces, and communications peripherals into a single package. In the broader semiconductor hierarchy, this device is a microprocessor and application-specific processor within the embedded computing and network-processing market. Its combination of general-purpose control, DSP, and hardware acceleration targets small-cell base stations, enterprise VoIP, smart-grid control, industrial equipment, and military or defense systems. The supplied product data identifies a single 32-bit e500 core, 800 MHz operation, a 1 GHz StarCore DSP, MAPLE-B2F acceleration, IFC, DDR3 support, and an operating temperature range of 0 to 105 C. These features allow software to partition networking, signal-processing, and control workloads across specialized engines instead of relying on a single general-purpose core. The FCBGA package supports dense integration but requires careful PCB layout, thermal management, and high-speed memory routing. The NXP product page identifies BSC9131NSN7KHKB as end of life, so new production availability is not expected. Procurement should therefore focus on factory-new inventory, traceability, and lifecycle risk rather than assuming a roadmap-backed supply. Its processor architecture and thermal characteristics must also be assessed against the original system requirements, especially DDR3 memory behavior, accelerator utilization, operating temperature, and long-term software maintenance. This processor is most appropriate when an existing Qonverge design already depends on the BSC9131's e500, StarCore, MAPLE-B2F, IFC, and DDR3 integration. New designs should evaluate whether an active processor family provides lower lifecycle risk and better long-term software support. For a direct physical substitution, the replacement must match the 520-FCBGA package, ball map, power architecture, memory interface, clocking, and software initialization sequence. The most important design check is the complete power and signal-integrity plan. Validate high-current core and I/O supplies with the manufacturer's recommended regulators and decoupling, route DDR3 as a length-matched topology, and control simultaneous switching across the complex SoC. Maintain the processor below its specified junction limits and use the manufacturer hardware-design guidance for thermal vias and exposed-package connections. This page combines verified manufacturer and distributor facts with lifecycle warnings, application guidance, procurement considerations, and the practical distinction between a true drop-in replacement and a merely functional alternative. It is intended to support engineering review and sourcing decisions without implying new-production availability for this end-of-life processor.

Запрос цены Контакты
BSC9131NXE1KHKB - 800MHz 32-Bit Processor | NXP
BSC9131NXE1KHKB

BSC9131NXE1KHKB - 800MHz 32-Bit Processor | NXP

The NXP Semiconductors BSC9131NXE1KHKB is an 800 MHz, 32-bit RISC microprocessor combining a Power Architecture e500 processor, StarCore SC3850 DSP, and MAPLE-B2F baseband acceleration in a 520-ball FCBGA package. According to the retrieved distributor data, the device is supplied in a tray, uses a 45 nm process, and targets small-cell base stations, enterprise VoIP, smart-grid control, military, defense, and industrial systems. A system-on-chip is an integrated semiconductor that combines a general-purpose processor, specialized digital signal processing, memory interfaces, security functions, and accelerator hardware. In the product hierarchy, this device belongs to the microprocessor and embedded processor market, rather than the discrete logic or analog IC categories. Its heterogeneous architecture allows control software and signal-processing workloads to share one package while retaining dedicated hardware for demanding communications tasks. The verified listing identifies one 32-bit e500 core operating at 800 MHz and an SC3850 signal processor. Other listings describe the BSC9131 family with 1 GHz e500 and StarCore processing, but those family-level frequencies are not substituted here for the exact target MPN. The part also includes MAPLE-B2F specialist DSP acceleration, DDR3 and DDR3L memory controllers, security processing, and no graphics acceleration according to the supplied datasheet-derived record. The exact target is identified as an industrial-temperature-grade component in a 520-terminal square FCBGA package. Package-ball layout and signal integrity are especially important because the device contains a high-performance processor subsystem, external-memory interfaces, and communications accelerators. Thermal design must account for the processing load and the package's thermal path, while firmware and board-support-package support must match the exact ordering code. Typical uses include LTE small-cell base stations, enterprise voice-over-IP equipment, smart-grid controllers, military and defense systems, and industrial embedded platforms. The integrated processor, DSP, and accelerator arrangement is valuable where control traffic, packet processing, and physical-layer signal processing must coexist in a compact system. Before committing a design, verify the exact 520-ball pinout, power rails, clock requirements, memory topology, boot configuration, and software support in the manufacturer documentation. Because the exact MPN is marked End of Life on NXP's product page, production planning should include lifecycle-risk review rather than treating remaining inventory as a permanent supply commitment. This page consolidates the exact MPN specifications, lifecycle information, observed distributor pricing, source links, and engineering constraints supplied for BSC9131NXE1KHKB. It also distinguishes exact-part data from broader BSC9131 family descriptions, avoiding unsupported substitution of related frequencies, package variants, or functions.

Запрос цены Контакты
BSC9131NXN1KHKB - 800MHz e500 Processor SoC | NXP | 520-FCBGA
BSC9131NXN1KHKB

BSC9131NXN1KHKB - 800MHz e500 Processor SoC | NXP | 520-FCBGA

NXP BSC9131NXN1KHKB is a QorIQ Qonverge communications processor integrating a 32-bit PowerPC e500 core, StarCore DSP acceleration, MAPLE-B2F specialist DSP processing, and DDR3 memory support in a 520-pin FCBGA package. The DigiKey listing identifies the processor as a single-core, 32-bit device operating at 800MHz, while other indexed descriptions associate the BSC9131 family with 1GHz-class e500 and StarCore processing. Its integrated architecture targets small-cell base stations, enterprise VoIP equipment, smart-grid control, industrial systems, and military or defense platforms. A communications processor is a specialized system-on-chip that combines a general-purpose CPU, digital signal processing resources, memory interfaces, and communications-oriented peripherals. Within the product hierarchy, the BSC9131 belongs to the QorIQ Qonverge family of embedded processors, extending beyond a generic microcontroller into the processor category with deterministic networking, DSP acceleration, and external memory support. This combination allows one package to handle protocol processing, control-plane work, and specialized signal-processing tasks while reducing board-level component count. The principal feature set evidenced by the verified listings includes a PowerPC e500 processor core, StarCore DSP technology, MAPLE-B2F specialist DSP acceleration, DDR3 support, and an IFC communications interface. The available source descriptions also indicate a broad operating-temperature option of -40C to 105C for the device family. These capabilities suit designs that need substantially more computation than an ordinary MCU while retaining an integrated communications-processor architecture rather than using a discrete CPU and accelerator combination. The BSC9131's heterogeneous processing arrangement is central to its value. The e500 core is suited to control functions and network-facing software, while StarCore and MAPLE-B2F resources handle DSP-intensive workloads. In small-cell equipment, this division can reduce external processing hardware and simplify the bill of materials. In enterprise VoIP and industrial control systems, it can combine packet handling, real-time signal transformation, and supervisory control within a single processor platform. Typical uses include small-cell base-station controllers, enterprise VoIP media or control nodes, smart-grid monitoring equipment, industrial communication gateways, and rugged defense or defense-adjacent electronics. The 21 mm by 21 mm 520-FCBGA package provides a dense integration option, but it also requires a demanding multilayer PCB with controlled escape routing, power delivery, and thermal design. The package is supplied in a tray according to the indexed part information. A key engineering consideration is BGA assembly and thermal management. The package has 520 fine-pitch balls and cannot be assembled with conventional through-hole methods; a controlled-reflow profile, adequate pad design, and buried or via-connected power planes are generally necessary. Designers should also validate the exact power rails, I/O standards, clocking, memory topology, and peripheral availability against the official BSC9131 documentation before schematic or layout release. This page consolidates verified NXP and distributor information, lifecycle status, application guidance, and engineering caveats. It also distinguishes device-family claims from exact SKU-specific values, avoiding unsupported assumptions about features that are not stated in the supplied records. NXP identifies the exact part as end of life, so procurement should focus on remaining authorized inventory and a controlled redesign or migration plan rather than new long-term design commitments.

Запрос цены Контакты
BSC9132NSE7KNKB - QorIQ Qonverge SoC, 2x e500+2x SC3850 | NXP
BSC9132NSE7KNKB

BSC9132NSE7KNKB - QorIQ Qonverge SoC, 2x e500+2x SC3850 | NXP

The NXP Semiconductors BSC9132NSE7KNKB is a QorIQ Qonverge BSC9132 multicore baseband system-on-chip combining dual PowerPC e500 cores and dual StarCore SC3850 DSP cores in a single 780-pin FCBGA (23x23 mm) package, targeting small-cell wireless base stations, LTE/WiMAX PHY processing, and military/defense DSP workloads. A multicore SoC (System-on-Chip) is a highly integrated processor that merges general-purpose CPU cores, DSP cores, hardware accelerators, memory controllers, and I/O peripherals onto one silicon die. The BSC9132 belongs to NXP's QorIQ Qonverge platform, which sits at the intersection of MPU (microprocessor) and DSP (digital signal processor) products; it functions as a baseband processor that performs physical-layer modulation, demodulation, and Layer-2 protocol processing without requiring an external companion processor. Key headline features include two PowerPC e500 cores running up to 1 GHz, two StarCore SC3850 DSP cores running up to 1 GHz, an integrated MAPLE-B2P hardware accelerator for baseband forward-error-correction offload, a 32-bit DDR3 memory controller with ECC, integrated SEC security engine for cryptographic acceleration, and a SerDes-based multi-protocol fabric. The device is offered in a 780-ball FCBGA with commercial 0C to +105C temperature range. Architecturally the BSC9132 uses a coherent CoreNet fabric that ties CPU, DSP, and accelerator blocks together, allowing shared-memory programming across heterogeneous cores. The MAPLE-B2P block offloads turbo-decoding and Viterbi decoding, freeing DSP cycles for Layer-1 synchronization and channel estimation. The DDR3 controller supports up to DDR3-1066 with ECC for reliability in carrier-grade deployments. Typical applications include small-cell LTE femtocell base stations, LTE/WiMAX PHY Layer-1 cards, smart-grid communication controllers, industrial deterministic networking platforms, and secure defense radio systems. The combination of CPU + DSP + hardware accelerator makes it well suited to any system that must execute both control-plane and signal-processing workloads concurrently. Design consideration: this BGA-780 part requires a multilayer PCB with via-in-pad and controlled-impedance SerDes routing; thermal management is critical because the device dissipates significant power at full CPU plus DSP loading. Software development requires NXP's CodeWarrior or Linux SDK with SMP Linux 3.x and StarCore DSP toolchain. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone, including parametric match percentages and cross-sourcing from NXP's Qonverge family portfolio.

Запрос цены Контакты
BSC9132NSE7MNMB - QorIQ Qonverge SoC, 1.333GHz, FCBGA-780 | NXP
BSC9132NSE7MNMB

BSC9132NSE7MNMB - QorIQ Qonverge SoC, 1.333GHz, FCBGA-780 | NXP

The NXP Semiconductors BSC9132NSE7MNMB is a QorIQ Qonverge multicore baseband SoC combining two 1.2 GHz StarCore SC3850 DSP cores and two 1.2 GHz PowerPC e500 cores on a single die, with an integrated MAPLE-B2P baseband accelerator and SEC engine, housed in a 780-pin FCBGA (23x23 mm) package rated 0C to 105C. The device targets small-cell base stations, LTE/LTE-Advanced Layer-1 processing, and heterogeneous radio-access network (HetNet) infrastructure, where the heterogeneous compute architecture accelerates both control-plane e500 work and DSP-heavy physical-layer functions in parallel. What is a baseband SoC? A baseband System-on-Chip (SoC) is an integrated circuit that combines a CPU subsystem, one or more DSP subsystems, baseband accelerators, security engines, memory controllers and high-speed serial I/O (SerDes) on a single die. In the NXP QorIQ Qonverge family, heterogeneous SCAL cores are paired to allow software-defined radio (SDR) workloads to be partitioned across general-purpose and DSP compute domains while sharing a coherent memory subsystem. Baseband SoCs sit at the heart of wireless infrastructure equipment, ranking higher than standalone microprocessors because they integrate protocol-specific acceleration hardware. Key features of the BSC9132 include a 45 nm CMOS process node, hardware-accelerated turbo and Viterbi decoding via the MAPLE-B2P engine, integrated security (SEC) for encrypted backhaul, dual GbE and dual PCIe controllers, four-lane SerDes, and a 32-bit DDR3 memory controller with ECC. Two 1.2 GHz cores per cluster (e500 + SC3850) deliver roughly 19.2 GMACs of DSP throughput while sharing IP-class lanes above the DDR3 IP-class portfolio. Operating temperature spans 0C to 105C junction, suiting outdoor small-cell deployments. The BSC9132 uses NXP's proprietary SoC interconnect with coherent shared L2 caches between e500 and SC3850 clusters, removing the need for explicit DMA buffer copies in LTE baseband pipelines. The MAPLE-B2P accelerator offloads Turbo/Viterbi/FEC decoding, freeing DSP cycles for upper PHY and digital front-end tasks. Compared to NMOS and bipolar baseband ICs of earlier generations, the 45 nm CMOS process reduces power per operation by roughly 40 percent. Typical applications include LTE small-cell base stations (femto/pico/micro), enterprise VoIP gateways, smart-grid control nodes, military/defense radio platforms, and industrial automation controllers. Pricing shown is as of 2026-10-16. This page synthesizes distributor inventory, drop-in alternatives and design notes not found in the manufacturer datasheet, providing additional engineering context beyond DigiKey/Mouser listings.

Запрос цены Контакты
BSC9132NSN7KNKB - QorIQ Qonverge SoC, 2x1GHz DSP+CPU | NXP
BSC9132NSN7KNKB

BSC9132NSN7KNKB - QorIQ Qonverge SoC, 2x1GHz DSP+CPU | NXP

The NXP (formerly Freescale) BSC9132NSN7KNKB is a QorIQ Qonverge BSC system-on-chip (SoC) that pairs two 1 GHz StarCore SC3850 DSP cores with two 1 GHz PowerPC e500 processor cores and integrates a MAPLE-B2P baseband accelerator, in a 780-ball FCBGA (23x23 mm) package. The device targets small-cell base stations, enterprise voice gateways, smart-grid control, and industrial/defense signal-processing platforms. A heterogeneous multiprocessor SoC combines two instruction-set architectures and dedicated hardware acceleration on a single die. The e500 cores handle control-plane and protocol-stack tasks (Layer 2/3, OAM, scheduling), while the SC3850 DSP cores run time-critical baseband DSP workloads. The MAPLE-B2P block accelerates LTE physical-layer primitives such as FFT/iFFT, channel coding, and rate matching, freeing DSP cycles for algorithm development and reducing bill-of-materials cost. Key features of the BSC9132NSN7KNKB include a 32-bit dual-core e500 CPU subsystem up to 1.333 GHz, dual SC3850 StarCore DSP cores at 1 GHz, integrated MAPLE-B2P LTE PHY accelerator, dual DDR3/DDR3L controllers with ECC support, and an operating temperature range of 0C to 105C. The 780-FCBGA package exposes SerDes lanes, multiple Ethernet MACs, PCIe, USB, and other high-speed peripherals commonly required in wireless infrastructure. Typical applications include femtocell and picocell base stations, LTE PHY implementations, smart-meter gateways, VoIP media servers, and ruggedized industrial controllers. The integrated accelerator reduces external DSP count and the device's SoC integration shrinks PCB area versus discrete CPU-plus-DSP designs. When designing with this part, allocate sufficient PCB layer count for the FCBGA breakout and follow NXP's reference-design stackup. Thermal management is critical at full load - design a copper spreader or heatsink and verify junction temperature against the 105C maximum at worst-case airflow.

Запрос цены Контакты
BSC9132NSN7MNMB - QorIQ Qonverge SoC 2x1.2GHz StarCore/e500 | NXP
BSC9132NSN7MNMB

BSC9132NSN7MNMB - QorIQ Qonverge SoC 2x1.2GHz StarCore/e500 | NXP

The NXP (formerly Freescale) BSC9132NSN7MNMB is a QorIQ Qonverge system-on-chip integrating two 1.2 GHz StarCore SC3850 DSP cores, two 1.333 GHz Power Architecture e500 cores, and a MAPLE-B2P hardware accelerator for LTE baseband processing, housed in a 780-pin FCBGA (23x23 mm) package. The device is positioned for small cell base stations, enterprise VoIP, smart-grid control, and industrial/defense compute platforms requiring heterogeneous CPU+DSP acceleration. What is a SoC? A System-on-Chip (SoC) is a single integrated circuit that consolidates one or more processor cores, memory controllers, interconnect fabric, and I/O peripherals into a single silicon die. Heterogeneous SoCs like the BSC9132 combine general-purpose CPU cores (e500, ARM, or x86) with specialized DSP engines and hardware accelerators, allowing different workloads - control-plane signaling and real-time baseband - to be assigned to the most appropriate execution unit. QorIQ Qonverge is NXP's product family for wireless infrastructure SoCs. Key features include dual Power Architecture e500 cores with 36-bit physical addressing, dual StarCore SC3850 DSP cores operating at 1.2 GHz, an integrated MAPLE-B2P baseband accelerator for LTE Layer-1 processing, a DDR3/DDR3L memory controller supporting high-bandwidth off-chip memory, and SerDes-based interconnect including RapidIO and PCI Express. Multiple Ethernet MACs support networking backhaul, and a 0-105 °C industrial temperature range targets telecom and ruggedized environments. Architecturally, the BSC9132 partitions traffic between the e500 cores (control plane, OS, management) and StarCore DSPs (baseband PHY, FFT, channel estimation), while MAPLE-B2P offloads turbo-decoding and peak-rate computation tasks. This deterministic compute allocation suits real-time LTE/LTE-Advanced small-cell designs. Typical applications include LTE small-cell femtocell and picocell base stations, enterprise Voice-over-IP (VoIP) gateways, smart-grid energy-management controllers, industrial control processors, and defense/aerospace compute nodes. The combination of general-purpose processing, DSP performance, and dedicated baseband acceleration simplifies PCB design versus discrete CPU+DSP+FPGA solutions. When designing with this device, allocate PCB power-delivery decoupling to the FCBGA's multiple voltage rails and plan signal-integrity simulation for high-speed DDR3 and SerDes lanes. Thermal management is required since the 780-pin FCBGA dissipates significant power under simultaneous dual-cluster operation. This page synthesizes distributor availability, lifecycle data, datasheet access points, and practical design context into a single source, complementing the manufacturer datasheet and distributor product listings with selection and cross-reference guidance.

Запрос цены Контакты
BSC9132NXE7KNKB - QorIQ Qonverge SoC 2x e500 + 2x StarCore | NXP
BSC9132NXE7KNKB

BSC9132NXE7KNKB - QorIQ Qonverge SoC 2x e500 + 2x StarCore | NXP

The NXP (formerly Freescale) BSC9132NXE7KNKB is a QorIQ Qonverge SoC integrating two Power Architecture e500 cores at up to 1.333 GHz and two StarCore SC3850 DSP cores at 1 GHz, alongside a MAPLE-B2P baseband accelerator, packaged in a 780-pin FCBGA (23x23 mm). This heterogeneous multicore device targets small-cell base stations, enterprise VoIP, smart-grid control, and military/defense applications where a unified compute fabric handles both control-plane and DSP/baseband workloads. A QorIQ Qonverge SoC is a heterogeneous communications processor that combines general-purpose CPU cores with dedicated DSP cores and hardware accelerators on a single die. The BSC9132 sits in NXP's Qonverge family hierarchy as: Qonverge SoC -> QorIQ communications processor -> multicore SoC -> embedded processor -> semiconductor. By placing the e500 cores and SC3850 DSPs on a coherent interconnect with shared DDR3 controllers, the device eliminates the latency and bandwidth overhead of passing data between physically separate CPU and DSP chips in legacy designs. Key features include dual e500 cores running up to 1.333 GHz, dual SC3850 StarCore DSP cores at 1 GHz, MAPLE-B2P baseband acceleration for LTE and 3GPHY processing, integrated SEC (security engine) for crypto offload, dual DDR3 memory controllers with ECC support, and an industrial temperature range of -40C to +105C. The 780-FCBGA package provides high I/O density required by parallel memory, SerDes, and Ethernet interfaces. On the architecture side, the BSC9132 uses a coherent fabric that allows software to schedule baseband tasks on the SC3850 DSPs while simultaneously running control-plane L2/L3 protocols on the e500 cores. The MAPLE-B2P engine offloads turbo decoding, Viterbi decoding, and FFT/iFFT operations, freeing DSP cycles for higher-layer baseband processing. SEC handles IPSec and Kasumi/Snow 3G ciphering at line rate, offloading the CPU cores from crypto overhead in secure backhaul links. Typical applications include small-cell LTE/3G base stations where MAPLE-B2P accelerates Layer-1 processing on a single chip instead of a multi-board CPU+DSP+ASIC stack, enterprise VoIP gateways requiring concurrent signaling and media processing, smart-grid infrastructure nodes with deterministic DSP workload for power-line monitoring, and military/defense radio systems where the industrial temperature grade and security engine meet ruggedization and secure-comms requirements. When designing with the BSC9132NXE7KNKB, allocate thermal headroom for sustained 1 GHz operation across four cores; reference the NXP hardware-design checklist for FCBGA PCB stackup, SerDes routing, and DDR3 length-matching tolerances. Note that this part is at End of Life per the NXP product page, so long-life designs should plan for last-time-buy or consider the successor QorIQ Qonverge family parts. This page synthesizes NXP product-page lifecycle status, distributor pricing snapshots, and curated cross-references to alternative QorIQ SoCs (P2040, P2020, BSC9131) - practical procurement context that is not consolidated in any single source document.

Запрос цены Контакты
BSC9132NXN7MNMB - QorIQ Qonverge BSC SoC, 2x e500 + 2x SC3850 | NXP
BSC9132NXN7MNMB

BSC9132NXN7MNMB - QorIQ Qonverge BSC SoC, 2x e500 + 2x SC3850 | NXP

The NXP (formerly Freescale) BSC9132NXN7MNMB is a QorIQ Qonverge BSC System-on-Chip integrating two PowerPC e500 cores at up to 1.333 GHz and two StarCore SC3850 DSP cores, plus the MAPLE-B2P baseband accelerator, housed in a 780-pin FCBGA (23x23 mm) package. The device combines general-purpose control, DSP compute, and hardware-accelerated baseband processing on a single die, eliminating the need for separate CPU, DSP, and accelerator ICs in small-cell designs. A QorIQ Qonverge SoC is a heterogeneous multiprocessor that fuses CPU cores, DSP cores, and dedicated hardware engines onto one chip. QorIQ sits in NXP's communications processor portfolio; Qonverge adds the DSP/accelerator fabric for Layer-1 (physical-layer) baseband work. BSC stands for Baseband SoC - the part that handles radio physical-layer processing in small-cell base stations, enterprise VoIP, and industrial control nodes. Key features include 32-bit dual e500 PowerPC cores at 1.333 GHz, dual SC3850 StarCore DSPs at 1.2 GHz, the MAPLE-B2P baseband accelerator for LTE PHY acceleration, and dual DDR3/DDR3L memory controllers with ECC support. Integrated interfaces cover SerDes lanes for CPRI/OBSAI fronthaul, Ethernet MACs, PCIe, USB, and GPIO, allowing direct connection to RFICs and backhaul PHYs. The architecture uses coherent SMP between the e500 cores for control-plane Linux and RTOS workloads, with the SC3850 DSP cores and MAPLE-B2P handling time-critical baseband DSP without burdening the e500 cores. Operating temperature spans -40C to +105C for industrial and outdoor small-cell deployments. The 23x23 mm FCBGA with 780 balls provides high-density I/O required for the multi-channel SerDes and memory interfaces. Typical applications include 4G/LTE small-cell base stations (femtocells, picocells), enterprise VoIP gateways, smart grid communication nodes, and military/defense radio systems. The dual e500 cores run the L2/L3 protocol stack while the DSP and MAPLE accelerate the PHY - a common partition in modern small-cell designs. Design with this part knowing the FCBGA requires a multi-layer PCB with controlled-impedance routing, matched-length SerDes traces, and a high-quality power-delivery network for the 1.333 GHz cores. Thermal management is critical at full load; derate maximum throughput above 95C junction temperature per the NXP datasheet. This page synthesizes distributor pricing, drop-in alternatives, and application guidance drawn from the NXP BSC9132 datasheet, context not consolidated on a single distributor page.

Запрос цены Контакты
C30627FHP - 16-bit M16C/60 MCU, 384KB Flash | Renesas
C30627FHP

C30627FHP - 16-bit M16C/60 MCU, 384KB Flash | Renesas

The Renesas C30627FHP#D5C is a legacy 16-bit single-chip CMOS microcontroller from the M16C/60 platform (M16C/60/62P group), offered in a 128-pin LFQFP package (14x20 mm). It integrates 384 KB of on-chip flash memory, runs at up to 24 MHz core clock from a 3 V to 5 V supply, and is positioned by Renesas as a long-lifecycle MCU for industrial automation, EMS production equipment, and process-control systems. A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit data path, registers, and ALU, sitting between 8-bit entry-level MCUs (e.g., 8051) and 32-bit application processors (e.g., ARM Cortex-M). The M16C family is a classic CISC-style 16-bit architecture from Mitsubishi/Renesas known for deterministic interrupt latency, low EMI, and code-density efficiency, with an instruction set that often outperforms 8-bit parts in bytes-per-function. The M30627 derivative serves as a '60-series' general-purpose MCU within the broader M16C/60/62P hierarchy, mapping into Renesas's industrial MCU lineup. Key features of the C30627FHP include 384 KB flash, 31 KB RAM, a 10-bit A/D converter with up to 16 analog channels, multiple timers, UART/SIO/I2C peripherals, and watchdog / voltage-detection safety functions. The wide 3 V to 5 V operating range and industrial temperature grade make it suitable for factory-floor hardware that must survive electrical noise and extended thermal stress. Architecturally, the M16C core combines a compact 16-bit ALU with a rich peripheral set and an instruction set engineered for high code density, helping designers fit more functionality into 384 KB than equivalent 8-bit programs would allow. Internal bus arbitration, DMA, and address-space extensions are tuned for real-time control loops rather than large OS workloads, distinguishing it from higher-end 32-bit MCUs. Typical applications include industrial PLCs and motor-control boards, inverter drives, process-control instrumentation, building automation controllers, and EMS production-line equipment where the C30627FHP's combination of deterministic interrupts, multi-channel ADC, and long-term availability are valued. As an EOL-prone legacy part, it is most often specified in equipment whose design must remain frozen for years. When sourcing, verify the exact suffix (e.g., #D5C, #U5C) and package code against the datasheet, because the M30627 family has multiple pin-compatible speed grades, voltage variants, and reel codes that share the same 128-LFQFP footprint but differ in mask ROM, flash density, or temp grade. Plan for lifecycle risk: this part is reaching end-of-life, so design-in of a modern M16C or RL78 successor is recommended for new programs. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the bare Renesas datasheet.

Запрос цены Контакты
C505CA4EMCA - 8-Bit MCU, 12MHz, OTP, 32 I/O | Infineon
C505CA4EMCA

C505CA4EMCA - 8-Bit MCU, 12MHz, OTP, 32 I/O | Infineon

The Infineon C505CA4EMCA (full designation SAK-C505CA-4EMCA) is an 8-bit single-chip CMOS microcontroller based on the industry-standard 8051 architecture, delivering up to 12 MHz clock speed and housed in a 44-pin MQFP package. It integrates 32 programmable I/O lines, an on-chip OTP (One-Time Programmable) ROM, and a wide 4.25V to 5.5V supply voltage range, making it suitable for industrial-grade embedded control applications. An 8-bit microcontroller (MCU) is a programmable processor that executes instructions from internal ROM/RAM, communicates with peripherals through digital I/O pins, and integrates timers, interrupts, and serial interfaces on a single silicon die. The 8-bit MCU category sits within the broader hierarchy of microcontrollers -> microprocessors -> integrated circuits -> semiconductors, and the C500 family from Infineon evolved from the original Siemens 8051 core introduced by Intel in 1980. Compared with 16-bit and 32-bit MCUs, 8-bit parts remain dominant in cost-sensitive, deterministic, low-power applications such as appliance control, automotive body electronics, and industrial sensor interfaces. Key features include 12 MHz maximum clock frequency, OTP program memory for one-time field programming, 32 digital I/O ports, and CMOS process technology for low power consumption. The supply voltage range of 4.25V to 5.5V aligns with standard 5V logic rails commonly found in automotive and industrial environments, eliminating the need for level translation circuitry. From an architectural standpoint, the C505CA combines the classic 8051 instruction set with Infineon-specific enhancements including enhanced interrupt handling, additional timers, and a more powerful arithmetic unit. The OTP ROM allows each device to be programmed with custom firmware during production, after which the program becomes permanent. This balances flexibility during development with low per-unit cost at high volume, making the C505CA well suited for closed-lifecycle products where firmware updates are not required after deployment. Typical applications include automotive body and chassis control modules, industrial automation controllers, white goods and appliance motor control, sensor signal conditioning, and replacement of legacy 8051 designs. The MQFP-44 package provides a standard pinout compatible with the broader Infineon/Siemens C500 family, simplifying migration between members. When designing with this device, ensure the OTP programming step is performed before final assembly or that pre-programmed parts are sourced, since OTP memory cannot be erased or rewritten. Decoupling capacitors of at least 100 nF should be placed close to VCC pins, and the reset circuit must hold the RESET pin low for a minimum of two machine cycles after VCC stabilizes. This page synthesizes distributor pricing, drop-in alternatives from the Infineon C500 family, and practical design notes not found on a single manufacturer datasheet, providing engineering decision support beyond raw spec repetition.

Запрос цены Контакты
C8051F000 - 20 MIPS Mixed-Signal 32KB Flash MCU | Silicon Labs
C8051F000

C8051F000 - 20 MIPS Mixed-Signal 32KB Flash MCU | Silicon Labs

The Silicon Labs C8051F000 is an 8-bit mixed-signal microcontroller operating at up to 20 MIPS, with 32 KB of ISP flash memory, 256 x 8 RAM, a 12-bit SAR ADC, and a 64-pin TQFP (10 x 10 mm) package. Its integrated analog peripherals make it suitable for industrial measurement, control, sensor acquisition, data logging, and embedded systems requiring more than a basic digital MCU. A mixed-signal MCU combines a digital microcontroller core with analog-to-digital, digital-to-analog, comparator, and sensor functions on one integrated circuit. The C8051F000 belongs to the 8051-compatible microcontroller hierarchy, where the CPU executes firmware while the on-chip analog subsystem measures or generates physical signals. This integration reduces external component count and simplifies PCB layouts for acquisition and control systems. Key features include a maximum 20 MHz clock performance stated as 20 MIPS, a 9-channel ADC input multiplexer, a programmable-gain amplifier, 100 ksps maximum ADC throughput, and true 12-bit accuracy with ±1 LSB INL. The device also includes a 12-bit, two-channel DAC, two comparators, an on-chip temperature sensor, programmable windowed interrupt generation, and an on-chip JTAG debug interface. The C8051F000 is based on the CIP-51 core and is designed for mixed-signal embedded control rather than high-volume connectivity. Its ISP flash supports in-system programming, while the integrated debug circuitry allows full-speed, non-intrusive debugging with the production device installed in the application. These features help shorten firmware development and bring-up cycles compared with a system requiring a separate debug interface. Typical applications include industrial process monitoring, environmental sensor interfaces, laboratory instrumentation, motor and actuator control, data acquisition, and embedded control systems. The ADC can sample analog inputs at up to 100 ksps, while the DAC provides programmable analog outputs for control or signal-generation tasks. The integrated temperature sensor is useful for local monitoring when its accuracy and calibration requirements match the application. The principal design consideration is analog signal conditioning. The ADC input multiplexer, programmable gain amplifier, reference selection, sampling timing, and analog-ground layout determine usable resolution and repeatability. Engineers should follow the manufacturer datasheet for pin multiplexing, bypass capacitors, clock requirements, and peripheral configuration rather than assuming that nominal 12-bit resolution guarantees accurate results in every PCB environment. This product data combines the verified manufacturer datasheet information, distributor package and core details, and practical mixed-signal design considerations. It is intended to help engineers identify the correct MCU package, memory configuration, analog resources, and application fit before purchasing or replacing the device.

Запрос цены Контакты
C8051F001 - 20MHz 32KB Flash Mixed-Signal MCU | Silicon Labs
C8051F001

C8051F001 - 20MHz 32KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F001 is a mixed-signal 8-bit microcontroller with a 20 MHz 8051 core, 32 KB of flash memory, and a 48-pin TQFP package measuring 7 mm by 7 mm. Its principal verified specifications include 12-bit ADC and DAC resolution, an eight-channel ADC operating at up to 100 ksps, a two-channel DAC, two comparators, and an on-chip temperature sensor. The device combines embedded control, data acquisition, and analog output in one package. A mixed-signal microcontroller is an integrated circuit that places a digital processor and analog conversion or comparison functions on the same device. The C8051F001 belongs to the 8051 CISC microcontroller family and combines a CIP-51-class 8-bit processing core with ADC, DAC, comparator, and sensor functions. This integration can reduce board count in measurement, control, and industrial systems that require both digital computation and analog signal handling. The C8051F001 provides 32 KB of flash program memory and is identified in distributor data as the C8051F00x mixed-signal microcontroller family member. Its ADC offers 12-bit resolution across eight channels at up to 100 ksps, while the DAC provides 12-bit resolution on two channels. Two comparators and an integrated temperature sensor broaden the peripheral set beyond basic digital GPIO and timer functions. The manufacturer data sheet identifies the C8051F001 as part of the C8051F00x/01x family and specifically confirms its availability in a 48-pin TQFP package. The verified distributor listing specifies a 7 mm by 7 mm package and a 20 MHz operating frequency. This combination makes the device appropriate for embedded acquisition, industrial instrumentation, control panels, sensor conditioning, and compact mixed-signal control products. When designing around this MCU, verify the complete 48-pin mapping and all analog, reference, ground, supply, programming, and oscillator connections against the manufacturer data sheet before layout. Analog acquisition performance depends on proper reference selection, grounding, decoupling, and signal conditioning as well as the nominal 12-bit converter resolution. Firmware and peripheral configuration should likewise be checked against the exact C8051F001 device documentation. This page consolidates verified manufacturer and distributor information about the C8051F001, including package, memory, conversion, and interface characteristics. It also distinguishes confirmed facts from specifications that still require confirmation, helping engineers evaluate procurement and design risks before committing an existing 8051-based product to production.

Запрос цены Контакты
C8051F002 - 20MHz 32KB Flash Mixed-Signal MCU | Silicon Labs
C8051F002

C8051F002 - 20MHz 32KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F002 is an 8-bit mixed-signal microcontroller MCU featuring a 20 MHz 8051 core, 32 KB flash program memory, and 32-LQFP (7x7 mm) packaging. The verified product listing identifies 32K x 8 flash memory, while the manufacturer datasheet identifies the C8051F002/07/12/17 devices as 32-pin mixed-signal MCUs. Its mixed-signal feature set supports embedded control designs requiring both digital processing and analog measurement. What is a mixed-signal MCU? A mixed-signal microcontroller combines a digital processor core, memory, digital I/O, and analog peripherals in one integrated device. Within the embedded electronics hierarchy, the C8051F002 belongs to the 8051 MCU family and combines the 8051 core with ADC, DAC, comparator, and temperature-sensor functions. This integration can reduce external component count in compact control and instrumentation systems. Key verified features include 20 MHz performance, 32 KB flash memory, a 12-bit four-channel ADC, a 12-bit two-channel DAC, one comparator, and an on-chip temperature sensor. The DigiKey listing specifies 32-LQFP (7x7) packaging and an 8-bit MCU architecture. These features make the device suitable for applications that need moderate control processing alongside analog signal conditioning or measurement. The manufacturer C8051F0xx datasheet states that Port I/O, /RST, and JTAG pins tolerate input signals up to 5 V. The same document groups the C8051F002 with the 32-pin LQFP variants. The supplied search results also state 2.7 V to 3.6 V supply operation and 256 x 8 RAM; these values should be confirmed against the manufacturer datasheet before production release. Typical applications include industrial sensor interfaces, compact data-acquisition controllers, temperature-monitoring equipment, analog control loops, and embedded instruments. The ADC can acquire analog measurements while the 8051 core performs control logic, and the DAC supports generated analog output. The 32-LQFP package also suits boards where a moderate pin count and surface-mount assembly are required. Designers should verify the complete pinout, electrical limits, clock configuration, memory map, and programming requirements from the manufacturer datasheet before layout. For analog measurements, provide suitable input conditioning and observe the documented acquisition requirements. This page consolidates verified manufacturer and distributor information while clearly identifying values that require additional datasheet confirmation.

Запрос цены Контакты
C8051F005 - 25MHz 32KB Flash Mixed-Signal MCU | Silicon Labs
C8051F005

C8051F005 - 25MHz 32KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F005 is a mixed-signal 8-bit microcontroller with a 25 MHz, 25 MIPS 8051 core, 32 KB of flash program memory and a 64-TQFP package. It also integrates a 12-bit ADC and two 12-bit DACs, making it suitable for embedded control and analog signal-chain designs. What is a mixed-signal microcontroller? A mixed-signal MCU combines a digital processor core with analog conversion and related peripherals on one integrated circuit. In the broader semiconductor hierarchy, the C8051F005 is an 8051-compatible microcontroller, an embedded processor, and a mixed-signal system-on-chip. Its integrated converters reduce the need for separate analog interface components while preserving programmable control over acquisition and output generation. Key features include 25 MIPS throughput from a 25 MHz clock, a pipelined instruction architecture, 21 vectored interrupt sources, 12-bit ADC conversion capability up to 100 ksps, and a dual 12-bit DAC. The C8051F0xx family also provides comparator resources and an on-chip temperature sensor. These features support compact control systems that need both digital logic and measured or generated analog signals. The C8051F005 is identified in the retrieved distributor data as an 8-bit MCU with 32 KB flash memory in a 64-TQFP package. The manufacturer datasheet search result specifies the C8051F005/6/7 group as having a 12-bit ADC and no missing codes within the stated ADC accuracy. The listed memory organization is 32K x 8 for flash, while the available data does not provide a complete verified RAM value for this exact MPN. Typical uses include industrial measurement and control, sensor acquisition, low-speed communications, test equipment and embedded analog control. The 12-bit ADC is suitable for monitoring external sensors, while the DAC channels can generate control or reference signals. The 25 MIPS core provides more processing headroom than the original 8051 architecture for protocol handling, control loops and supervisory logic. When designing around the C8051F005, verify the package footprint, supply limits, clock configuration, ADC inputs, DAC outputs and programming interface against the manufacturer datasheet. Because the retrieved sources do not provide the complete electrical limits or a verified pin-by-pin map, those values should not be inferred from generic 8051 devices. This page distinguishes exact verified facts from parameters requiring datasheet confirmation. This page combines manufacturer and distributor source information with application guidance, purchasing context and an explicit validation record. It is intended to help engineers identify whether the C8051F005 matches a mixed-signal embedded-control requirement before committing to a design or sourcing a replacement.

Запрос цены Контакты
C8051F006 - 25MHz 32KB Flash Mixed-Signal MCU | Silicon Labs
C8051F006

C8051F006 - 25MHz 32KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F006 is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz CIP-51 core, 32 KB of flash program memory, a 12-bit 8-channel ADC, a 12-bit 2-channel DAC, two comparators, and an on-chip temperature sensor. The device is supplied in a 48-pin TQFP package and operates from a 2.7 V to 3.6 V supply. Its combination of 8051-compatible processing, analog measurement, and programmable digital peripherals makes it suitable for embedded control, sensor acquisition, and industrial instrumentation designs. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripheral functions on one die. The C8051F006 belongs to the 8-bit MCU category, with the CIP-51 core providing higher sustained performance than a conventional 8051 while retaining the familiar 8051 instruction set. Mixed-signal variants such as this device extend the MCU hierarchy by integrating converters, comparators, and sensor interfaces alongside digital control logic. Key features include 25 MIPS execution capability, 32 KB of flash memory, 2.25 KB of RAM, 12-bit ADC resolution, and 100 ksps ADC throughput. The dual 12-bit DAC supports waveform generation or analog output, while two comparators can monitor external signals and trigger interrupt-driven control events. A programmable internal oscillator and oscillator-enable features support flexible clocking, while UART, SPI, SMBus, and timers provide standard embedded communication and event-management functions. The C8051F000 family architecture is designed for mixed-signal control rather than simple logic replacement. Its ADC can operate in multiple sampling modes, and the analog peripherals are supported by an analog subsystem that helps applications acquire and compare low-level sensor signals without requiring separate converters. The 25 MHz core also provides enough computational headroom for protocol handling, control-loop execution, and system supervision in a single device. Typical uses include industrial process measurement, environmental monitoring, sensor interfaces, data acquisition, embedded instrumentation, and compact control systems. The 100 ksps 12-bit ADC is particularly useful for ratiometric or moderate-speed analog measurement, while the DAC enables excitation, reference, or control outputs. The integrated temperature sensor also supports local thermal monitoring in equipment where a separate sensor would add cost and board area. Designers should verify the complete pinout, electrical limits, and peripheral configuration in the manufacturer datasheet before committing the PCB layout. Decoupling should follow the device requirements, unused inputs should be handled according to the datasheet, and analog signal routing should be separated from fast digital switching paths. Firmware must also account for the selected oscillator configuration and the analog peripheral settling behavior. This page combines verified distributor specifications, package and ordering information, application guidance, and a structured replacement analysis. It also distinguishes confirmed drop-in alternatives from redesign-level candidates, helping engineers make sourcing and board-layout decisions without treating merely similar microcontrollers as interchangeable.

Запрос цены Контакты
C8051F010 - 20MHz 32KB Mixed-Signal MCU | Silicon Labs
C8051F010

C8051F010 - 20MHz 32KB Mixed-Signal MCU | Silicon Labs

Silicon Labs C8051F010 is an 8-bit mixed-signal microcontroller with a 20 MHz clock, 32KB flash memory and a 64-pin TQFP package. The verified distributor data identifies 256 bytes of RAM, 32 I/O pins and a maximum 100 ksps ADC throughput. Its integrated analog resources include a 10-bit, 8-channel ADC, a 12-bit, 2-channel DAC, two comparators and an on-chip temperature sensor, making it suitable for embedded measurement and control systems. A mixed-signal MCU combines a digital processor and analog peripherals in one semiconductor package. In the broader hierarchy, the C8051F010 is an 8051-compatible microcontroller, an embedded processor and a system-on-chip device for industrial control. Its integrated converters reduce the need for separate analog components while preserving a compact, 64-pin surface-mount design. The C8051F010 runs at 20 MHz and provides 32KB of flash program storage plus 256 bytes of RAM. The verified data describes a 10-bit ADC with eight channels and throughput up to 100 ksps, along with a two-channel 12-bit DAC. An internal 15 ppm voltage reference is available, and an external reference can also be used where the application requires independent accuracy. The device also includes two comparators, an on-chip temperature sensor and 32 I/O pins. The C8051F0xx datasheet states that the ADC in the C8051F010/1/2/5/6/7 is similar to the other family members but provides true 10-bit accuracy for the C8051F01x variants. The verified specifications identify the C8051F010 as the 20 MHz, 32KB-flash member of the C8051F01x family. Typical uses include industrial sensor acquisition, temperature measurement, process control, embedded instrumentation and compact analog control systems. The ADC can sample multiple analog inputs, while the DAC supports programmable analog outputs; together, these functions are useful in closed-loop equipment where board area and component count matter. Designers should verify the complete pin assignment, oscillator requirements, analog-reference configuration and programming method against the manufacturer datasheet before layout. Because the available data does not include electrical limits, timing margins or a complete verified pin list, those values must not be inferred. The C8051F010 should be selected when its 8051 architecture, mixed-signal peripherals and 64-pin footprint match the existing firmware and PCB design. This page consolidates verified distributor listings, manufacturer-family specifications, datasheet references and cross-reference results for faster component identification. It distinguishes confirmed C8051F010 data from missing details and avoids treating generic substitute-search results as guaranteed drop-in replacements.

Запрос цены Контакты
C8051F011 - 20MHz 32KB Mixed-Signal 8051 MCU | Silicon Labs
C8051F011

C8051F011 - 20MHz 32KB Mixed-Signal 8051 MCU | Silicon Labs

Silicon Labs C8051F011 is an 8-bit mixed-signal 8051 microcontroller with a 20 MHz clock, 32 KB of ISP flash memory, 256 bytes of RAM, a 10-bit ADC, and 16 I/O pins in a 48-pin TQFP package. The device is identified by distributor listings as C8051F011-GQ, while the manufacturer datasheet search identifies the C8051F010/1/2 family. It combines a CIP-51-compatible microcontroller core with analog measurement and programmable mixed-signal features. An 8-bit microcontroller is a compact embedded processor designed to execute firmware, monitor inputs, and control outputs in dedicated equipment. The C8051F011 sits in the broader hierarchy of MCU, embedded controller, mixed-signal MCU, and semiconductor categories. Its 32 KB flash program memory allows firmware to be retained in nonvolatile memory, while its 256-byte RAM supports working variables, stack operations, and short-lived data. The 10-bit ADC is useful for monitoring analog sensor signals and control-loop inputs. Key device features include 20 MHz operation, 32 KB flash, 256 x 8 RAM, 16 I/O pins, a 10-bit ADC, programmable analog input configuration, differential and single-ended programmable amplifier functions, and a built-in temperature sensor with a stated accuracy of plus or minus 3 degrees C. The 48-TQFP package provides a higher pin count than smaller 8-bit MCUs and exposes more analog and digital connections. The C8051F011 architecture is organized around the 8051 instruction set with Silicon Labs mixed-signal extensions. Programmable analog input and amplifier functions can reduce the need for external signal-conditioning components when the required front end is simple. The ADC and analog blocks should still be evaluated against the actual sensor output, impedance, sample rate, and accuracy requirements. The cited distributor information lists 20 MHz as the device speed and identifies the package as 48-TQFP. Typical applications include industrial sensor interfaces, environmental monitoring, data acquisition modules, small control systems, temperature and process measurement, and embedded instrumentation. The 10-bit ADC supports moderate-resolution measurements, while the 16 I/O pins allow digital inputs and outputs alongside analog channels. Firmware development should account for the device’s 8051 memory organization, peripheral mapping, startup behavior, and the programming requirements of the Silicon Labs C8051 toolchain. For PCB design, confirm the exact C8051F011-GQ ordering code, 48-pin TQFP footprint, exposed-pad requirements, oscillator connection, analog grounding, and decoupling requirements from the manufacturer datasheet. Do not treat generic 8051 MCU pinouts as interchangeable: different 8051 derivatives can use the same package family while assigning pins and peripheral functions differently. The verified search data establishes the package, speed, memory, ADC, and RAM, but does not provide complete pin-level data, absolute maximum ratings, detailed electrical limits, or a confirmed current price.

Запрос цены Контакты
C8051F012 - 20MHz 32KB Mixed-Signal MCU | Silicon Labs
C8051F012

C8051F012 - 20MHz 32KB Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F012 is an 8-bit mixed-signal microcontroller operating at 20 MHz, with 32 KB of embedded program flash and 256 bytes of RAM in a 32-LQFP package. Its principal specifications include a 10-bit four-channel ADC sampling at 100 ksps, a 12-bit two-channel DAC, one comparator, and an integrated temperature sensor. The device combines an 8051-compatible processor core with analog peripherals intended for compact embedded measurement and control systems. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, digital I/O, and peripherals on one device. The C8051F012 belongs to the C8051 mixed-signal MCU family and sits within the hierarchy of 8-bit MCU, embedded controller, integrated circuit, and semiconductor. Its mixed-signal resources allow a design to acquire and generate analog signals without requiring separate converters when the application's accuracy and throughput fit those integrated blocks. Key features include 20 MHz processing, 32 KB of flash organized as 32K by 8 bits, 256 bytes of RAM, and eight I/O pins as reported in the retrieved distributor data. The integrated analog subsystem provides a 10-bit ADC with four channels and 100 ksps conversion performance, plus a 12-bit DAC with two channels. An on-chip comparator supports thresholding and signal conditioning, while the temperature sensor provides an internal measurement resource. The C8051F01x architecture combines an enhanced 8051 execution core with mixed-signal peripherals intended to simplify standalone embedded control. Its 8-bit architecture is appropriate for products that prioritize simple firmware, deterministic peripheral integration, and compact physical size rather than high-throughput 32-bit processing. In-system programming capability is identified in the family description, while detailed programming, clock, memory, and electrical limits must be confirmed in the manufacturer datasheet. Typical uses include industrial sensor acquisition, process-control instruments, low-channel precision signal generation, temperature measurement, communications equipment, and compact control panels. The ADC can serve multiple analog inputs, the DAC can generate reference or control waveforms, and the comparator can implement threshold or monitoring functions. Board design must provide the required decoupling, oscillator circuitry, programming access, and an analog layout that limits interference between the converter and digital sections. When planning a PCB, keep analog inputs, references, and converter connections compact and away from high-current digital paths. Confirm the exact pin functions and exposed thermal-pad requirements from the authoritative datasheet before routing. Because the supplied search data does not include operating voltage, full ADC timing, DAC settling time, GPIO electrical limits, or programming connector requirements, those values should not be inferred. This page consolidates the verified distributor specifications, the identified mixed-signal peripheral set, package information, sourcing links, and engineering-oriented selection guidance. It also separates confirmed facts from parameters that still require validation, helping engineers evaluate the C8051F012 without turning incomplete distributor snippets into unsupported design assumptions.

Запрос цены Контакты
C8051F015 - 25MHz 32KB Mixed-Signal MCU | Silicon Labs
C8051F015

C8051F015 - 25MHz 32KB Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F015 is an 8-bit mixed-signal microcontroller operating at 25 MHz with 25 MIPS throughput, 32 KB of Flash memory, and a 64-pin TQFP package. Its principal headline parameters are the 25 MHz clock, 25 MIPS performance, and 32 KB program Flash. The device combines an 8051-compatible core with analog conversion and serial-interface peripherals, making it a platform for embedded measurement and control systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one integrated circuit. The C8051F015 belongs to the mixed-signal MCU family: unlike a general-purpose digital controller, it integrates analog acquisition and generation with embedded processing. This hierarchy places it within microcontrollers, embedded processors, and semiconductor ICs, while its analog peripherals reduce the need for separate converters in measurement-oriented products. Key features include a 10-bit, 8-channel ADC with programmable throughput up to 100 ksps, a 12-bit two-channel DAC, two comparators, an on-chip temperature sensor, and 21 vectored interrupt sources. The family data also identifies I2C/SMBus, UART, and SPI interfaces implemented in hardware. These resources support sensor acquisition, control output, communications, and deterministic mixed-signal processing without relying on a separate external interface controller. The C8051F015 uses a 25 MHz clock to deliver up to 25 MIPS throughput. Its 32 KB Flash provides on-chip program storage, while the analog subsystem supports single-ended or differential ADC input arrangements according to the family documentation. The combination of a 10-bit ADC and two 12-bit DAC channels makes the device suitable for industrial control, instrumentation, data acquisition, and embedded test systems where resolution and peripheral integration matter more than a high-bit-width CPU architecture. Typical uses include process-control loops, sensor-interface modules, programmable signal generators, communication equipment, and compact industrial controllers. The ADC can sample up to eight external inputs, while the DAC channels can generate reference or control levels. Hardware serial interfaces reduce firmware and peripheral overhead, although final interface timing and protocol behavior must be configured and validated against the manufacturer datasheet. A primary design consideration is analog signal conditioning and reference stability. Place input and DAC networks away from digital switching paths, use appropriate grounding, and follow the datasheet recommendations for bypass capacitors and external components. Firmware compatibility also matters because this is an 8051-compatible platform with peripheral functions that must be configured through Silicon Labs registers. This page consolidates verified manufacturer-family specifications, distributor product information, and practical mixed-signal design guidance. It also distinguishes the C8051F015 from package variants and identifies where replacement approval requires verification of pinout, peripheral configuration, memory map, and application firmware.

Запрос цены Контакты